Hide top level aggregation result

Hi Experts,
It is possible to hide intermediate results for aggregation using method SET_GROUP_AGGR_DISPLAYED of class CL_SALV_WD_CONFIG_TABLE (Interface IF_SALV_WD_FIELD_SETTINGS ).
Is it possible to hide the top level aggregation? I only want to display group aggregations
Thanks in advance
Johan Kriek

Hello experts,
Is this possible?
Regards,
Johan Kriek.

Similar Messages

Hide Top level navigation if user assigned only one role

Hi,
I would like to hide the top level navigation if user assigned with only one role.
I can create role based rule to show desktop using Master rule collection, but is it possible by doing to with role count.
If user has multiple roles show desktop1 else show desktop2

not sure if this possible ,you may check feasibility of creating a application which checks user role count and if role count is = 1 load the Portal url (URL alais) which had TLN iview invisible in the same window else do nothing and load the portal with the desktop which has tln.
Put the application in framewrk page which has TLN visible.
create a URL alias and create a desktop -framework page which dont have TLN ,assign this desktop to this URL alias in rule collection set its priority before user conditions check in rule collection so that it has high priority before user or group check in rule collection.
you can create a poc in sandbox and check if it wiorks?

How to hide Top Level Navigation?

Hi,
I created a quicklink for an iview.
I am able to call the iview from IE window using the quicklink.
But it displays the top level navigation (Company Logo, Welcome message, Logoff, Role tabs,...).
How do I hide this?
Thanks
Sundar

Hi Vinit,
Your solution is working when I clicked the preview button in iview edit window.
But when I try to open the iview using Quicklink with external IE window, it shows the MastHead, TLN.
It is not hiding the MastHead and TLN.
Thanks
Sundar

Terminal Command to re-hide top level 'private' folder?

I've forgotten the Terminal Command for re-hiding the 'private' folder (top level of Snow Leopard). I have just restored the system from Time Machine and the private folder tends to reappear. Can anybody help? I tried "chflags hidden /private" but it didn't work. Cheers.

/private is owned by root, so you should try that command with sudo in front of it.

OBIEE BI Answers: Wrong Aggregation Measures on top level of hierarchy

Hi to all,
I have following problem. I hope to be clear in my English because it's a bit complicated to explain.
I have following fact table:
Drug Id Ordered Quantity
1 9
2 4
1 3
2 2
and following Drug Table:
Drug Brand Id Brand Description Drug Active Ingredient Id Drug Active Ingredient Description
1 Aulin 1 Nimesulide
2 Asprina 2 Acetilsalicilico
In AWM i've defined a Drug Dimension based on following hierarchy: Drug Active Ingredient (parent) - Drug Brand Description (leaf) mapped as:
Drug Active Ingredient = Drug Active Ingredient Id of my Drug Table (LONG DESCRIPTION Attribute=Drug Active Ingredient Description)
Drug Brand Description = Drug Brand Id of my Drug Table (LONG DESCRIPTION Attribute = Drug Brand Description)
Indeed in my cube I've mapped leaf level Drug Brand Description = Drug Id of my fact table. In AWM Drug Dimension is mapped as Sum Aggregation Operator
If I select on Answers Drug Active Ingredient (parent of my hierarchy) and Ordered Quantity I see following result
Drug Active Ingredient Description Ordered Quantity
Acetilsalicilico 24
Nimesulide 12
indeed of correct values
Drug Active Ingredient Description Ordered Quantity
Acetilsalicilico 12
Nimesulide 6
EXACTLY the double!!!!!!! But if I drill down Drug Active Ingredient Description Acetilsalicilico I see correctly:
Drug Active Ingredient Description Drug Brand Description Ordered Quantity
Acetilsalicilico
- Aspirina 12
Total 12
Wrong Aggregation is only on top level of hierarchy. Aggregation on lower level of hierarchy is correct. Maybe Answers sum also Total Row????? Why?????
I'm frustrated. I beg your help, please!!!!!!!!
Giancarlo

Hi,
in NQSConfig.ini I can't find Cache Section. I post all file. Tell me what I must change. I know your patient is quite at limit!!!!!!! But I'm a new user of OBIEE.
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
#Star     =     samplesales.rpd, DEFAULT;
Star = Step3.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE     =     YES;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS     =     "C:\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE     =     "Italian";
SORT_ORDER_LOCALE     =     "Italian";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS     =     "C:\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL     =     NO;
MINIMUM_PASSWORD_LENGTH     =     0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
#AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO;     // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH     =     "C:\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME     =     "C:\OracleBI\server\Log\OraDimExp.Log";

Can we hide filter in Search Master agreements standard top level query?

Hi Experts,
I have a requirement to hide flter in standard Search Master Agreements top level query. See below screen shot
I have an idea how to delete filter in query but when i have added that query to top level navigation i don't have any idea.
So i want to hide Business Unit & Region filter in Search Master Agreement query when it is in top level navigation.
If anyone have idea please share with me how to hide.
Thanks,
Lava

Hi Lava,
It is not a filter but this a Standard field which is coming from the Master Agreement.
So, you cannot hide or even delete any field.
But if it is a custom field you can hide it by inactivating the respective field in Extension Defination.
Please let me know if you need any assistance.
Thanks,
Raj.

Show/Hide tabs in top level navigation of a role based on assigned services

Hi,
I have an interesting requirement. I have created an overview page in abap web dynpro which has links to various services.
Based on the r3 roles assigned to the user, we need to show/hide the services in the overview page and top level navigation.
I can show/hide the views in the overview page but the links on top level navigation are created in the portal frontend by creating worksets, iviews, etc.
Is there a way I can show or hide these worksets which are defined in the role on top level navigation?
In a nutshell, can i update the visible/invisible property of a java workset from a call in abap web dynpro?
Regards,
Sumeet

Please refer the framework page [http://help.sap.com/saphelp_nw70/helpdata/en/02/c7918e9fca44519701c47028a053fd/content.htm|http://help.sap.com/saphelp_nw70/helpdata/en/02/c7918e9fca44519701c47028a053fd/content.htm]
What i meant was that you can do a custom TLN like this
[http://help.sap.com/saphelp_nwce711core/helpdata/en/42/fd515a2aa95277e10000000a1553f7/content.htm|http://help.sap.com/saphelp_nwce711core/helpdata/en/42/fd515a2aa95277e10000000a1553f7/content.htm]
Seems to me java/jsp is more appropriate than doing it via WDA.
ANother way that you might look into this is Application integrator which again java programming effort needed.

Adding commentary in ASO Cube and aggregating it to TOP Level

Hi Gurus,
I have one peculiar problem. We are adding commentary in BSO Planning cube now i have couple of problem related to it.
a) These commentary needs to be pushed in ASO cube (Reporting) which need are entered in Lower Level.
b) At top level these commentaried need to be Aggregated or rather Concatenated.
eg.
ProfitCentre has two child P1 and P2 and user enter commantary in BSO for P1 and P2 as "Market Risk Deviation" and "Standard Output"
then in the HSPgetval Smartview report the conent of report will look like:
Profit Centre          Market Risk Deviation + Standard Output
P1                        Market Risk Deviation
P2                        Standard Output.
Any thoughts/ Suggestions/ Input/ Ways to achieve so
Thanks
Anubhav

Apart from what Glenn suggested
Not out of box, you are looking at a JAVA API + SQL based solution here
Here are my thoughts
Either use a Select query and get the Text values and IDs from the tables HSP_CELL_TEXT (or HSP_TEXT_CELL) table
Create a Java API, which can import a TextList in ASO cube, ID is going to be what you get from the table
Load the data to ASO from Planning
Now for the aggregation/concatenation part, you'll have to Add those as again Smart List, This can be done by looking at HSP_CELL_TEXT (or HSP_TEXT_CELL) table, there is an ID associated with each text, get the id associated
So for example Market Risk Deviation is 1 and Standard Output Deivation is 2, then you should add Market Risk Deviation + Standard Output as 3, however you'll have to make sure that there is no entry from Planning for 3
It is complicated
Regards
Celvin Kattookaran

SharePoint 2010 Content from top level site hidden from search results on subsite.

Hi Everyone,
The issue I am having is that when a group of people are in there site, we'll call it site B, and they hit the search function, they only get results from site B and subsites of site B, but nothing from the top level site, site A. does anyone know of anyway
to get results from site A when searching in site B? This would really help me out a lot.
Thanks!
Best regards, Mike

Hi Mike,
According to your description, my understanding is that you want to display the content in top level site in search results page when doing search in subsites.
By default, the search scope is set to This Site in all sites, so the search scope in subsites is limited to the subsites.
I recommend to create a Search Center and then edit the Search settings in the top level site settings, please refer to the image below:
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Hide specification column in result recording at plant level

Hi,
There is an requirement to hide specification column in result recording screen at plant level.
By table control we can hide the specification column but the setting is at user level or client level.
Is there any standard procedure to hide specification column at plant level.
Regards
Amol

Dear Amol,
Try this if works for you.
1.     Go to QA32
2.     Select an inspection lot
3.     Click on results
4.     Here you will get the specification column along with RR column
5.     Reduce the width of specification column just like we do in Microsoft excel by dragging it from right to left until it disappears
6.     At the right hand side you find a small table like symbol. When you move your mouse pointer towards it, it reflects as Configuration.
7.     Click it
8.     Give suitable name to variant and save
This is user ID specific.
Best Regards,
Anand Rao

How to hide name of Role from the top level navigation of the portal

Hi Experts,
In my project, I have created 2 roles Role A and Role B. These roles have been assigned to User X.
When user X logs in, he is able to see name of role that is 'A' in the top level navigation.
As per the requirement, user X should not see the 'A'.
Rather user X should see following:
Top Level Navigation: 'My Work'
When user clicks on 'My Work', he should see
'My Sub Work1' and 'My Sub Work2'.
After that under 'My Sub Work1' user should see following
All Objects of Role A
All Objects of Role B
Name of role i.e. 'A' or 'B' should not be displayed at all at any place in navigation.
Only whatever objects has been assigned to Role A and B should be displayed in detailed navigation area.
Can you please let me know how to achieve this?
Pictorial Diagram:
                  My Work       (In top level navigation)
My Sub Work1    My Sub Work2    (In top level navigation)
_________Objects of role
A
       |
       |_________Objects of role
                               B
Please note that 'My Work' and 'My Sub Work1' and 'My Sub Work2) are not roles. They are just the name of folders.
Can you please let me know how to achieve it?
Regards,
Brian

Hi Brian,
Try the following steps.
1. Change the 'Entry Point' property of Roles A and B to 'No'.
2. Create a role folder called 'My Work' under A and B.
3. Set the 'Entry point' property of this folder to 'Yes'.
4. Set the 'merge id' property of the folder as "mywork" (or any other string) under both roles A and B.
5. Under 'My Work' in Role A,
a. Set the 'Merge Priority' property to 50.
b. create subfolder 'My sub work1' and create all your objects.
6. Under 'My Work' in Role B,
a. Set the 'Merge Priority' property to 100.
b. create subfolder 'My sub work2' and create all your objects.
7. Make sure the user is assigned both the roles A and B. Only then he/she can see objects of both the roles.
8. One thing to remember while merging folders is that, all the entities that are being merged should be at the same level. For eg: in our case, you cannot merge 'my subwork1' in role A, with 'my work' in role B.
Reward points if helpful.
Regards,
Priya

Parent-Child hierarchy without facts in top-level

Hello folks,
I've got a fact table which looks like:
fact_id | costs | some_id
1 | 5 | 1
2 | 10 | 1
and a hierarchy which looks like:
id | super_id | some_id
1 | null | null
2 | 1 | 1
3 | 1 | 1
In the business logic layer I defined two keys for the dimension talbe (id and some_id) and built the hierarchy on the first (id).
Also I defined a foreign key from the fact table to the dimension on the second.
As you see no facts are assigned to the first entry (= top-level) in the hierarchy (id = 1).
However the children of 1 have got facts.
What I want is to show the costs for the children (which is the sum of 5 and 10) and the total sum for the parent (30).
However when I drag the hierarchy and the costs into an analysis I get no results available, as there are no facts for the top-level.
How can I fix this?
Regards,
Matthias

Hi Dhar,
thanks for your reply!
What you write coincides with what I thought would happen (but didn't).
Hence there must be some error in my rpd file.
I created my hierarchy right-clicking on the dimension table and only setting the mandatory settings (that is the definition of parent/menber keys and the setup for the hierarchy table).
I didn't touch what admin-tool created inside the hierarchy, which is: a "total" level, where "grand total level" is checked, and a "detail" level, where "Supports rollup to higher level of aggregation" is checked.
What other settings in the admin-tool will I have to touch to step forward?
@anton: I'm using OBIEE 11.1.1.5.0
Regads,
Matthias

Aggregation plan/Skip level aggregation for model with a cumulative measure

I have planning data in the following format.
Project     Department Name     Task     Date          Units of work completed
PRO1     DEPARTMENT1          Task1     01/01/2008     12
PRO1     DEPARTMENT1          Task1     01/21/2008     3
PRO1     DEPARTMENT1          Task1     03/01/2008     8
PRO1     DEPARTMENT1          Task1               4
PRO1     DEPARTMENT1          Task2     01/21/2008     5
PRO1     DEPARTMENT1          Task2               9
PRO1     DEPARTMENT2          Task1     01/01/2008     20
PRO1     DEPARTMENT2          Task1     02/11/2008     6
PRO1     DEPARTMENT2          Task3     01/15/2008     15
Note: The rows having blank dates indicate remaining work for that task
Based on user requirements, I have created a OLAP model as follows
Dimensions:
1. All Projects-->Projects
2. All Department-->Department
3. All Tasks     --> Tasks
4. Year-->Month-->Day
Measures:
1. Total units of work (Irrespective of date)
2. Cumulative units of work completed (Based on the date)
If someone has worked on similar models before, I would be thankful if they can help me with
1) An aggregation plan for these measures. (Basically, for my first measure, I would want to get a cumulative total across my time dimension, and for my other measure, I would like to see the total units, whatever date I pick, for example, for Dep1, Task1, this measure should show 27 on 01/01/08 and also on 01/21/08 and also when I roll up and look at year 2008, I still need 27 in this column)
2) Is it ok to apply Skip level aggregation to this type of calculations, or would that result in some problems?
Any and All suggestions to implement this are welcome.
Thanks,
Bharat

Hi,
Can you build time dimension to include as many years as your application needs (2000 to 2025 say)? Then you can simplify the model a lot by defaulting the records with remaining units -- the ones with no date -- with the last date in your time dimension (31-DEC-2025). So in a sense, you're loading them as if they'll be complete on 31-DEC-2025.
Also you should have a grand total level (ALL_YEARS say) along time dimension which contains a single member which includes all the years.
Cube with 3 dimensions: Projects, Dept, Task, Time and 1 Fact: Units
You can use calculated measures to get the results you want
1. Total units of work (Irrespective of date) ... reference top most member. Will include all -- completed and incomplete units of work.
Expression: cube1_units(time 'ALL_YEARS_1').. or use olap dml function to get the last member programatically if desired... Alternate Expression: cube1_units(time limit(time to time_levelrel eq 'ALL_YEARS')).
2. Cumulative units of work completed (Based on the date)
2a: Create formula/measure which is a regular Cumulative summation of Units .... Note: you need a Period-To-Date calculation set to sum up all peers under ancestor at level: ALL_YEARS (instead of year)
This will include all completed units until the day in question. Since incomplete units are on the last day, they will not count.. You may need to add a special check for the last day.
Use another formula to reference 2a appropriately across all levels of time...
Formula for Measure #2: if time_levelrel eq 'DAY' then 2a else 2a(time statlast(limit(time to bottomdescendants using time_parentrel time(time time))))
For higher levels of time (above day), you should reference the Cumulative units of work for the last day of the relevant period. E.g. To get completed units of work for October 2011, you need to reference the value of 2a. for last day of the Month: 31-Oct-2011.
HTH
Shankar

Possible to Have ToC Default to Show Only Top Level (collapse sublevels)?

Howdy!
I'll bet I'm not the only one wishing for this. Let's say you're using Captivate 4's Table of Contents feature with a longish movie of Cp slides, which is chunked into bite-size sections content-wise. In the ToC, though, you can't mimic that same organization scheme; at least, the learner would first need to collapse all the ToC folders you've created so they see only the top-level listing.
This can be a critical issue: keeping the at-first-glance list in the ToC brief enough to be inviting to learners, yet allowing learners to drive which details are currently visible.
A movie's topical hierarchy could be along these lines, for example ...
Section 1 - National Brands
What are National Brands?
Why Are They Important to Our Business?
Working with Nat. Brands
Practice Your Knowledge
Section 2 - International Brands
What are International Brands?
Why Are They Important to Our Business?
Working with Intl. Brands
Practice Your Knowledge
You'd like to organize the ToC to show only the section titles (1st level) and to suppress the 2nd-level detail (slide titles) until the learner chooses to expand the folder to see those details.
I've tried things like grouping the slides into sections in the Storyboard view and organizing the slides into sections strictly within the ToC -- both to no avail.
Has anyone solved for this need yet?
I'm all ears, and you'd be doing learners of the world a huge favor.
Thanks!

Hi, Jim.
Thanks for being 'on the case' and looking into this so quickly. Your
findings are encouraging, although my user base is generally working with
IE 6 and FP8 or 9.
Since the only thing I may influence is getting IT to help push out FP10,
I'm hoping it's more of a player- than a browser-version issue.
I'll test things out by Monday and let you know the results. Wish me luck!
Dave
                                                                                From:       Jim Leichliter <[email protected]>
To:         Dave Tressler <[email protected]>
Date:       03/26/2010 06:02 PM
Subject:    Possible to Have ToC Default to Show Only Top Level (collapse
              sublevels)?
Dave,
I just tested this on my local web server and it worked fine. I created a
blank project with 8 slides. Created my TOC with grouping... 2 slides in
each group. I turned on self paced learning. I tried with and without the
widget and it picked up where I left off in either case. See
https://docs.google.com/leaf?id=0B86WuEq6SVwRNWIwMjhjODctMjE2Yy00MWE2LWI5YzEtMGQxYzNjOWQ0Z mI2&hl=en.
I published using FP10 and IE8 to view. Notice any difference between
your project and this one?
Thanks,
Jim Leichliter

How can i NOT include top level keyword in the metadata of an image?

Hello,
I want to know how can i NOT include top level keyword in the metadata of an image. I know there is an option for not applying a keyword to an exported image, but is there an option for not applying the top level keyword to the actual image?
I have organized my geographical (by location) keywords like this:
Places
USA
New York
Miami
Spain.
If i add geographical keywords to all my images, all my images will have the keyword "Places", i dont think that it have any sence to have all your images with one keyword. How can i fix this? Any sugestion? i will appreciate it a lot any help or information that you could give me.
Excuse my english, i know it is not good. I hope that you could understand me.
Thanks,
Marcelo :)

Explicitly excluding a keyword only applies when "exporting". Unfortunately, there's currently no way to stop the keyword being written to the file when "Save Metadata to File" command is used. The natural reaction of users to this difference is to suggest that it is stupid. Nevertheless, there are good reasons why the difference exists:
1. "Export" creates a new file whereas "Save Metadata to File" writes the metadata back into the existing file.
2. There are very good reasons why certain keywords should not be written to file, and the example given in the OP is one. Saving metadata to file is more often used as means of backing up important image related metadata, independently of the catalog or allowing the metadata to be visible in other aplications. It would be rare that such a file would be shared with a third party, so the reason for not including certain keywords is less obvious. Actually, not including it can result in no end of confusion and grief. For example, if the top level (or any keyword) was excluded during the save metadata process then the other keywords would be orphaned when image is imported back into the catalog (e.g. buiding a new catalog).
The development team are aware of the need, in some circumstances, to exclude certain keywords when save metadata command is used. How and when the issue is resolved, without adding even more confusion/complexity, is some way off.

Hide top level aggregation result

Similar Messages

Maybe you are looking for