Hiding user adresses from specific users adress list
Hi,
I've had a request to hide certain mailboxes from certain users. I know I can hide an address from the entire directory, but I'm looking to hide an address from only certain users.
I'm not explaining it greatly, but ideally I'm aiming to have an address such as [email protected] not searchable by any user who starts [email protected] or [email protected] but still be searchable bu users who start [email protected]
Is this dooable?
Thanks
David
The only way to do something like this is to create custom Address lists/Address book policies and assign them to the users you want to restrict. You can review the documentation here:
https://technet.microsoft.com/en-us/library/hh529948(v=exchg.150).aspx
Similar Messages
-
Hiding a document library from specific users or groups.
Just FYI I am far from a SharePoint but have able to accomplish a lot from everyone's help on the forums, so thank you in advace.
Now, Is it possible to hide a document library from specific users or groups? Here is what I am trying to accomplish.
We have a Document library that we want the whole company to view, we will call this Company Share. We then want to have a separate library/app that
is only visible to the Finance department. Then another library that is only visible to the shipping dept.
So when Linda from finance logs into the SharePoint site under Site Contents she should only be able to see 2 items, Company share and Finance.
Tom from shipping will only see Company Share and Shipping. Administrators and Management will see Company share, finance and shipping.
I was able to hide the library using sharepoint designer by checking the box "Hide from Browser" which worked but now none of the users can view the library.
They are only able to access it via a direct URLl link.
Any help is appreciated.Hi 3s1k,
What did you mean that "management does not want the actual folder library they are in to be visible"?
Please give more information about your requirement?
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
SharePoint 2010 Central Admin to add users from AD from specific Department
Dear All,
I am working on SharePoint Foundation 2010. I have to add users from specific department to a particular site collection.
Please let me know if there is a way to import users from Active Directory based on the 'Department' filed in
SPCA.
Thanks.Is that okay if I share the PowerShell code? Do you have access to Active Directory and can you query information?
Refer this Link
Code
# set site collection owner for all sites...
# 1-2012
Add-PSSnapin Microsoft.SharePoint.PowerShell
# $AccountList is an array of Windows Identities in the format of $AccountList = @("DOMAIN\USERID" , "DOMAIN\USERID2")
$accountList = @(Get-ADUser -Filter {(Department -like '*Ur Needs*')})
#$AccountList = @("LAB\Jack", "Lab\tom", "Lab\dick", "lab\harry")
#this gets an array of objects representing the sites at the IIS level:
$IISSites = Get-SPWebApplication
Foreach($oneIISSite in $IISSites)
#using .Sites, we can get a list of the site collections
foreach ($SharepointSiteCollection in $oneIISSite.Sites)
write-host $SharepointSiteCollection.url -ForegroundColor Cyan
$spweb = Get-SPWeb $SharepointSiteCollection.url
#now we have the website, so lets look at each account in our array
foreach ($Account in $AccountList.samaccountname)
#lets see if the user already exists
Write-host "Looking to see if User " $account " is a member on " $SharepointSiteCollection.url -foregroundcolor Blue
$user = Get-SPUSER -identity $Account -web $SharepointSiteCollection.url -ErrorAction SilentlyContinue #This will throw an error if the user does not exist
if ($user -eq $null)
#if the user did NOT exist, then we will add them here.
$SPWeb.ALLUsers.ADD($Account, "", "", "Added by AdminScript")
$user = Get-SPUSER -identity $Account -web $SharepointSiteCollection.url
Write-host "Added user $Account to URL $SPWeb.URL" -Foregroundcolor Magenta
else
Write-host "user $Account was already in URL " $SPWeb.URL -Foregroundcolor DarkGreen
if ($user.IsSiteAdmin -ne $true)
$user.IsSiteAdmin = $true
$user.Update()
Write-host "$account has been made an admin on $SPWeb.URL" -Foregroundcolor Magenta
else
Write-host "$account was already an admin on $SPWeb.URL" -Foregroundcolor DarkGreen
$SharePointSiteCollection.Dispose()
Note:
First uncomment the second $accountlist add the user manually to test
If you have AD module installed in your SP server you can use
$accountList = @(Get-ADUser -Filter {(Department -like '*Ur Needs*')})
Regards Chen V [MCTS SharePoint 2010] -
Is it possible to ignore postings from specific users
Hello,
is it possible to create a "black list" that will filter out postings from specific users?
Regards
ThomasIntriguingly this answer seems to suggest a global one is possible.
Is it like Survivor and we get to vote who goes on it? -
I keep getting this message from Imovie:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (Error in user parameter list)Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B -
m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.I need a control in Labview which allows a user to choose from specific values (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2 from a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a con
trol like this is not available.m a listbox, and then change the value on the block diagram, but what I want is that on the subvi node itself he can enter the actual values, say 1, 10, 200. Does anyone know how to do this, creatively, since currently a control like this is not available.> I need a control which allows a user to choose from specific values
> (which I specify), NOT 0, 1, 2 etc. [I KNOW I can let him enter 0, 1,2
> from a listbox, and then change the value on the block diagram, but
> what I want is that on the subvi node itself he can enter the actual
> values, say 1, 10, 200. Does anyone know how to do this, creatively,
> since currently a control like this is not available.
>
One way of doing this is to use either a ring or enum where the strings
presented to the user are "1", "10", or whatever you like. On the
diagram, the values will be 0, 1, 2, in a compact counting sequence.
Then do an array index into a constant. If this is done more than one
place, make the control a typedef so you can keep them consistent an
d
make the index be done in a subVI. Then whenever you need this, you
drop the control and the subVI, out comes the integer, float, or
whatever it is you want to index.
Greg McKaskle -
What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?
Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?
-
Validate "work e-mail" from user information list --give me wrong result
How can I validate the user "work email" from User Information List is working
properly?
I am following this >> http://social.msdn.microsoft.com/Forums/sharepoint/en-US/e4d41f77-c7e4-40ef-b85f-de7f972f2a3f/allow-submitter-see-only-the-items-that-are-relevant-to-him-in-drop-down-list?forum=sharepointcustomizationprevious#4d63b721-7acb-463a-b578-87eb1d72b5f1
But instead to get the correct work email I am getting >>domain \usernamedomain
\username domain \username (example: americas\admin_andress_belloamericas\admin_andress_belloamericas\admin_andress_bello)
CRISTINA&amp MICROSOFT ForumHi,
How did you validate the work e-mail?
I recommend to set another text field to get the email of the user from User Information List and then use the text field for validation.
Could you please provide an example of your requirement for reproducing this issue?
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
How to identify relevant BADIs to hide a screen field from specific users
We have a business requirement to hide a document item field (BSEG-XREF3) from specific users (i.e make the field invisible if the userid does not exist in a Z table) during FI invoice entry/maintenance/display via transactions FB01, FB02, FB03, FV50, FV60, FBV0, etc.. We know that it would be possible to do this via modification to the Process Before Output sections of LF040O00, LFDCBFM0, MF05AO00_DYNPRO_MODIFIZIEREN, MF05LO00, but would prefer to avoid modification if possible.
I believe that BADIs could possibly be used for screen enhancements, but have not had any previous exposure to BADIs, so I'm really not sure whether it's possible to use BADIs for our specific requirement. For example, using the advice given in the 2nd post in thread BADI for contract, I've searched SAPMF05A for all 'CALL METHOD cl_exithandler=>get_instance' statements, and have found that a single BADI (FBAS_CIN_MF05AFA0 - EWT - Downpayment Clearing - Tax transfer for CIN) seems to exist for FB01. The description of this BADI sounds completely inappropriate for our requirement. However, subsequent posts in that thread suggest far more BADIs for the relevant transaction than were given when searching the ABAP for all 'CALL METHOD cl_exithandler=>get_instance' statements, so I'm not convinced that the procedure I'm following will provide me with all the relevant BADIs for the transaction.
Please can you advise me how to identify which BADIs - if any - can be used to control screens before output for FB01 screen SAPMF05A/332 (SAP R/3 4.6C)?
Many thanks in anticipation,
JulesHi Kuntal,
Thank you very, very much for your prompt response and very useful alternative suggestion.
The screen variant solution would be invaluable under different circumstances, but would be too complex to administer for this particular issue because we're trying to hide the field from unauthorised users in over 100 invoice entry/maintenance/display transactions.
We can make a Process Before Output modification to 4 SAP standard programs (LF040O00, LFDCBFM0, MF05AO00_DYNPRO_MODIFIZIEREN, MF05LO00) to make the field invisible for unauthorised users (i.e. whose user-ids are not in a Z* table), but would prefer to avoid modification if we could use BADIs instead. You've said that you're not sure how we can identify the relevant BADIs, but I very much appreciate the suggestion you've made anyway - it might be useful to others who find themselves in a similar situation for a more limited number of transactions.
Please can someone advise me how to identify which BADIs - if any - can be used to control screens before output for FB01 screen SAPMF05A/332 (SAP R/3 4.6C)?
Many thanks,
Jules -
How to remove User IDs for deleted users from the Disk Quota list
Hello,
We have a computer lab setup with an Xserve managing 15 stations in the lab. Users are setup with networked home directories and quota's are setup on the drive containing the home directories to limit users' storage.
The user account and the quota limit are setup with Workgroup Manager. When a student has been gone for a while and we are sure they no longer need the account we delete their account within Workgroup Manager and move their Home folder to the trash.
When viewing disk usage in Server Admin (by selecting the volume and clicking the Quatas tab) user ids for deleted users are listed and it still shows the disk usage and quota settings for the user.
How can I remove theses user ids from the quota list?
Any help would be appreciated.
BrianI would restore User's file structre back to normal just by copying from standby user?
Did you mean copy files to a new user profile? If so, hope this link can be helpful for you
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
For the unknown user, as you said, it's probably a user account from second OS or
action. If you're annoying about this unknown user, then you can remove all occurrences of granted rights to the specified SID with this command icals [/remove[:g|:d]] <Sid>[...]] [/t] [/c] [/l] [/q]
http://technet.microsoft.com/en-us/library/cc753525.aspx
Yolanda Zhu
TechNet Community Support -
Send e-mail from specific user
Hello!
I'd like to create two different sending from SAP System - the first is monthly and the second is everyday.
May I schedule jobs either send mail from concrete SAP Users?
Otherwise Everyday job also can send preset messages from monthly job...
SAP Release: NW 2004
Thanks and Regards,
A.M.Hello A.M.,
You cannot schedule the job to send emails from specific users. If the send job is configured to run for INT, for example, it will send all emails with status 672 in SOST.
One thing you can do is to set waiting time in the emails. To do this, go to SOST, select the emails you want to set a wait time and click on the button "Set Wait Time" (it's a clock icon next to the delete button).
Regards,
Tiago -
How to import an adress list from NeoOffice (or Excel) to Adress Book
I have compiled an adress list using the spread sheet in NeoOffice (the Open Office port). I can export the list as text, but I can't make the text import in Adress Book work at all. This seems to be a bug in Adress Book?
Here are some test data, save as text using text edit:
lastname,firstname,street,mobile phone,zip,city,e-mail
etternavn,fornavn,adresse,mobiltelefon,postnummer,poststed,e-post
hemsen,testtest,snefjellveien 6,+4799665566,0023,oslo,[email protected]
jensen,testest,jordveien 7,+47-98798711,0110,oslo,[email protected]
johansen,testtest,Postboks 3443 Viken,22655454,11555,nordnes,[email protected]Hi Kappy,
Not for me. Here is the same in tab delimited format:
"lastname" "firstname" "street" "mobile phone" "zip" "city" "e-mail"
"etternavn" "fornavn" "adresse" "mobiltelefon" "postnummer" "poststed" "e-post"
"hemsen" "testtest" "snefjellveien 6" "+4799665566" "0023" "oslo" "[email protected]"
"jensen" "testest" "jordveien 7" "+47-98798711" "0110" "oslo" "[email protected]"
"johansen" "testtest" "Posboks 3443 Viken" "22655454" "11555" "nordnes" "[email protected]"
Still does not import. Address Book opens the text file ok in both formats. Be sure to convert to text in the format-menu in TextEdit before you save.
Address Book shows the data in the file in the import dialog, but does not import it. It seems to semi hang. I can browse the data, but the OK (to import) button does not work. I can only cancel the operation.
Ingmar -
I am trying to share a 1 hour movie via idvd. I keep getting an error message saying user parameter list is preventing publishing. What do I need to change?
Bartirn,
I called Apple under my Mac support contract. They were completely unfamiliar with the error you and I were encountering. Updating to 10.8.5 didn't help.
I'm stopping my TimeCapsule while I perform these tasks, but I don't know yet if I have a consistent work-around.
B -
how do i create a contact list in adobe send from my email contact list and how do avoid typing individual email adresses
Hi [email protected],
The e-mail addresses will not be memorized in Adobe send but will be saved in sent items.
You can use Adobe send outlook plugin to access your email contact list and send.
You can download it here:Send Large Files Online - Share, Control, Track & Manage | Adobe Send
Regards,
Florence -
User Account List
Is there a way to extract all user accounts from Request Center? Ideally into a spreadsheet that includes their names and user id's as well as whether they are active or inactive. We have a "no longer with the company process" and we need to make sure when someone leaves we make their account inactive. If I can pull a list of accounts they can be compared against a monthly list of users that are no longer with the company.
We are using RequestCenter 2007.1.2We're on 2006.0.6, but as long as the DIR tables haven't changed much, this SQL should extract what you're looking for:
select p.FirstName, p.LastName, n.LoginName, p.IsInactive
from DirPerson p,
DirContactInfo c,
DirNetworkInfo n
where p.Personid = n.PersonId
and c.Personid = n.PersonId
and c.ContactTypeId = 1
order by lastname, firstname -
Any help would help.
Hi
Error -50 paramErr - Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ?
Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Corrupted preference file: The "com.apple.iMovie.plist" file - trash it
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
• I only use PAL (25fps
Yours Bengt W
Maybe you are looking for
-
Crystal Reports 2008 export to PDF does not render Japanese fonts
Hello, I have searched the forums for this issue, and there does not seem to be a clear resolution to this problem. We are using CR2008 to create RPT files that are bundled with our custom .NET 2005 application, which then generates reports in PDF f
-
I hope someone can help me with my printing problem. For the past couple of weeks, everything I print is faded looking and lacking in color. We have a HP Photosmart 2700 printer and have replaced both cartridges. I thought that was the problem, bu
-
Something's wrong with my hard drive, and disk utility can't repair it...
Lately my MacBook Pro has been running really slow, so I ran Disk Utilities to see if it could fix it. However, when I ran it, the following is what I see. Would someone help me interpret what's going on? Thanks. Verify permissions for "HD” Warning:
-
I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?
-
Batch export of images from fla in flash professional to photoshop
Hi I need to use the images of a lot of flas and put them inside photoshop to add effects to them. We have over a thousand. Is there a way of doing this? Thanks in advance.