Hierarchical Cost planning in CJ40 not updating in CNS41

Hello Experts,
When i am planning cost using cj40 than checking report cns41 so this is not showing cost planned via cj40.
what will be reason of not showing this cost plan. Please guide.
thanks
Sunil

Hello Abdul,
Please check massage given when choosing version 0
You must not use version 0
Message no. BP067
Diagnosis
Version 0 is not intended for cost planning or flagged as a delta version.
System Response
Processing stopped.
Procedure
Choose a version which allows cost planning or
Notify your system manager.
Action by system manager
Release version 0 for cost planning.

Similar Messages

KP06 Plan Values are not updating in Cost center report

Hi,
I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
But after uploading planned values are not updating in the S_ ALR_87013611 Report.
What could be the reason.kindly give me some inputs regarding this.
Thanks
Supriya

Hi Supriya,
After uploading the entries have you saved or have you verified with excel values.
Please check.
Sateesh

Cost planning in cj40

Dear Experts,
I did cost planning in Cj40 for version 1 i.e planning version.
when i display it in cj41 its ok.
but when i run a report s_alr_87013534 which is plan1 X plan2 X actual X commitment
system asks for
plan 1 = 0 version
Plan2 = 1 version
then in report no planned cost is there for in version 1.
Please tell me that whether i am missing some steps or what?
Reply.

Hi,
As you wrote that you did planning in version 1 and you can see it in CJ41 by seleting plan version 1.
in report s_alr_87013534 you are giving following selection criteris
Plan1 = 0
Plan2 = 1
So here system is giving details in Plan1 for the planning version 0
and in plan2 for the planning vesion 1
As you had not done any planning in vesion 0 so you are not getting data in plan1 and getting data in plan 2 as you had done planning in version 1.
Even in CJ41 if you select data for version 0 system will not give any data.
Hope this clarification is sufficient to answer your query.
regards,

Cost plan (transact. cj40 ) and G/L ACCOUNT (transact. FB50 )

Hi all,
I have to enter COST PLAN by transaction CJ40 and G/L ACCOUNT by transaction FB50. I have to make it inside a program to run in background and not use batch input.
Do you have some idea ?? some bapi ??
tks a lot,
Roberto.

Hi,
try using this Standard program RSBDCSUB-for background processing.
In your report program-
Use the SY-BATCH to check for backaground processing set or not.
Depending on this SY-BATCH value call the transaction as required by you.
Or
Design a report by calling thse 2 transactions and In menu
PROGRAM->EXCEUTE->BACKGROUND this way we can do it. Pls let me know if you any issues with this.
<removed_by_moderator>
Best Wishes,
Chandralekha.
Edited by: Chandralekha on Jul 8, 2008 7:45 AM
Edited by: Julius Bussche on Jul 28, 2008 10:28 AM

Planning area data not updated in infocube in APO system

Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0

Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep

Cost Component Structure Price Not updating

Hi,
I have run cost estimate and successfully Mark and Released(CK40N). But when I see the cost estimate in CK13N its updating Ram Material cost (Overall and Lower level) but rest of the items not getting updated e.g. Mfg. Machine Time, Mfg Operter Labor, Quality Test Labour etc...
I have checked in Routings each acitivity is assigned and checked. In log "Mat xxxx, Routing does not match selection ID. ZC"
Please advise how can will get update fields(mach cost, labour cost) with values in cost componenst strucure in cost estimate..
Thanks
Srinu

Hi ,
About why routing not match. Please inform your PP consultant as below :
It could be your order type and plant selection id that assign are different. Please Check in OTD in OPL8 under routing tab also check in OPEB for automatic selection of routing also check the status of routing .
If above cannot slove , please goto
Goto OKKN->select the Costing variant that you have used in CK11N and under control tab goto quantity structure control
-check the value or ID assigned for routing selection.
As per this your routing gets selected in CK11N or CK40N.
Thank you.

Cost center (KOSTL) is not updating in HR master table for infotype 0001

Hi ABAP gurus,
We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
While updating cost center, We have one issue regarding infotype 0001.
It is working fine for all the fields except: KOSTL, ORGEH, STELL. Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
While debugging the IDOC function module I found that one condition is there for these three fields.
CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
GRPID = PLOGI
SEMID = ORGA
In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
Can any please provide the reasona and solution for this.
Appreciate the help in advance.
Thanks,
Jitender

Dear Mohan,
Try assigning your cost center to position it will default both your org unit and cost center.
Cheers!

"Cost Rollup - No Report" not updating costs for some items.

Hi ,
We have an issue with "Cost Rollup - No Report" program. When it is run for all items in an Organization, some item costs were not getting updated.
"Include in Cost Rollup" flag in Master Item form and in Item Costs form is enabled for these items. When we run the report for specific item , it is working fine, cost
is getting updated. Only when we run the report for all items of an org, we are having this issue. Any suggestion or help in this regard is highly appreciated.
Thanks in advance,
Pavan.

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Planned delivery time not updating real time in apo

Hi,
I have a location product which is part of the active integration model.
The location and product are both available in ECC and APO.
When i change the value of Planned delivery time in ECC, the changes do not get transfered to APO even after RIMODINI.
For e.g. the planned delivery time currently is 1 day and it is changed to 3 days, even after doing RIMODINI the changes are not reflected in APO.
Kindly suggest if somebody has come across this issue earlier.
Thanks & Regards.
Santosh Joshi

Hi Santosh,
Please check by tcode CFM5 weather material is there in IM or not .
Also check CFG1 log on R/3 and SLG1 or /SAPAPO/C3 or /SAPAPO/CQ in APO.
Please confirm.
Manish

Cost planning document number

Hi all,
When we do cost planning using cj40 . cost plan is updated and system generates one document number is generated. where to find that document number if we want to see history of cost planning.
Regards
shiv

Hi,
Try CJI9 if you are using Hierarchical Planning.
regards
Sreekanth

Commitment is not updated after PO creation !

After creation of a PO referenced to a PR created from MD51 on a WBS, the commitment in "S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned " is not updated although i believe that all configs are done. any one faced this prob.?

There is this note (47992 - No commitment is displayed in reporting) which explains when Commitments would not be generated. Please check if you case belongs to any of these:
1. For purchase orders/ purchase requisitions for project stock or customer stock with settlement on the project or sales order, no commitment is written in the standard program in general. If you want a commitment being written in these cases as well, apply the corrections from Note 498907
2. If a purchase requisition which is assigned to a WBS element is generated from material requirements planning (MRP), no commitment is generated for the WBS element.
Note also explains how updation of commitment values is controlled:
1. In the year-dependent controlling area control parameters, commitments management must be active (Transaction OKKP).
2. In addition, the G/L account to which the purchase order is assigned, must be created as a cost element at the delivery date.
Regeneration of the commitment afterwards is possible by changing the purchasing document (for example, the item text).
Regards
Sreenivas

Trying to default a cost plan for PS from a CRM contract?

I am trying to default a cost plan (akin to a budget maintained in IM) onto CJ40.
This cost plan will be defaulted via a CRM table maintained especially for the appropriation/budget.
Has anyone defaulted a cost plan onto CJ40 and if so how?
Thanks in Advance,
-SR

Hi,
The message is because your position has the historical record flag (HRP1000-HISTO) set to u2018Xu2019. From SAP help:
Allows you to mark infotype records as historical records. Historical records are permanently stored on the database, so that you can report on the information at a later point in time.
NOTE: You cannot change records once they are marked as historical. As a result, you should not mark records as historical unless you no longer require them for processing.
Typically, the flag is set if a user has delimited an object through PP01. Youu2019d see the historical flag in the window that pops up.
To remove the flag, execute report RHHISTO0, enter the relevant details in the selection and execute. The next screen ill show you which record has the flag set. Select that row and click u201Cremove historical recordu201D button on top. You should then be able to remove cost center from the position.
Hope this helps.
Donnie

Plant not updated in ABUMN

Hi,
While am doing Plant to plant asset transfer ABUMN , Plant not updated in FI Document .Send asset am giving 0001 and receiving Plant 002. both plant same cost center. but plant not updated in FI document .
Thanks
SV

Hi SV,
Once you create the new internal with the specified valid from and valid to, the time-dependent data valid for the date of the request is displayed.
After new time interval defined the data would reflect based on the new plant assignment.
If the assignment is different in other time periods, this is designated by a history indicator after the field.
You can display the entires using filed breakdown function.
Time-Dependent Data - Asset Accounting (FI-AA) - SAP Library
Hope this helps...
Ajay

Not updating SFG

Hi All,
Please help me in resolving the issue which i am facing at the time of standard cost estimation.
My client has a concept of subcontracting where raw materials given to the vendor as free of cost and pay some amount(labour cost) for converted as SFG. My client SFG cost would be Raw material cost + amount paid to the vendor(labour cost) this cost has to update in MM standard cost fieldwhen i run standard cost run. But system is calculating standard cost as raw material cost only and even not updating my material master.
Ex: Raw material A: Rs.100
Raw material B: Rs.150
Labour cost at the time of SFG convertion: Rs.10
My standard cost must be = 10015010 = Rs.260.
System updating only Rs.250 and not updating my Material master too...

Hi,
Check your configuration for valuation variant..by mainataining following things you will able to get charges paid to vendor in cost estimate
1. Enter Special Procurement Type for Subcontracting in Material Master MRP data 2 or Costing Data 1..
2. Enter Purchasing Info record for this material and vendor and Info record type for subcontracting in ME11 here, you need to specify the labour charges for the said combination (take help from you Material Management Consultant)
3. In your Valuation Variant..go to subcontracting tab and select Net Quatation Price as a strategy sequence..
4. Test the results in CK11N..
Regards,
Sayujya

Cost plan for sim version

Hi experts
The business requirement is as follows:
1) Project schedule option-1 with work packages and costing plan ( L1 schedule)
2) Project schedule option-2 with different work packages and relevant costing plan (L2 schedule)
Clien requires both of these as drafts
The requirement can be met by creating sim_ver1 and sim_ver2 in transaction CJV1 (with out having operative version).
Subsequently the approved sim version will be used for creating operative version.
But is it possible to maintain cost plan for sim versions?
If no, please suggest best practice.
warm regards
ramSiva

You can only use network costing for simulation version. Other cost planning methods are not possible for simualtion version. Refer SAP Help

Hierarchical Cost planning in CJ40 not updating in CNS41

Similar Messages

Maybe you are looking for