Hierarchy not showing

Hi,
For my report, I have Hierarchy as well as Hierarchy nodes as selection criteria for Cost Center. Hierarchy is defaulted to a particular one already in properties. But when i change it during selection, it doesnt show me the new one in the report. What could be the reasons for this?
Thanks
Fran

George,
I think you misunderstood the situation. Here it goes:
I have a hierarchy var defaulted to hierarchy ABC
Have a hierarchy NODE var also that shows nodes for ABC.
When I change hierarchy value from ABC to DEF,
Hierarchy node var should now show me nodes for DEF.
It doesnt. It still shows nodes for ABC during selection.
Hope I was clearer.
I think this should not be normal.
What do you say

Similar Messages

  • Hierarchy not showing prorperly sequence

    Hi All,
    i have issue with hierarchy in which BW hierarchy is not showing in correct sequence but in the source system it is showing in correct order and it is daily full load and which is successful.
    Can any one suggest me how to proceed to track this issue?

    Hi Nitin,
    Can you let us know your BW release and support package level? Can you also let me know the technical name of the Hierarchy datasource and the Infoobject that the Hierarchy is related too?
    Can you also let us know what you mean exactly when you say the Hierarchy does not show the correct sequence in BW? Please explain in detail.
    Thanks,
    Des.

  • Customer Hierarchy not showing in sales document

    Hi All,
    I have used the standard hierarchy type (A) to create a 2(or 3) level hierarchy  (top level node, 2nd level node and sold t party) and the hierarchy assignments look fine at the customer level. I have assigned the hierarchy type to the sales order type as well. But the hierarchy does not get carried over to the sales orders (contracts) when I create  the documents. I am sure it is something really silly, but any idea what I might be missing or where to start looking.
    Thank you so much for your help in advance...
    Shubha Tandon
    [email protected]

    Have you Mainted Price determination in the custome masrter record of the billing Tab.
    Have you correctly maintained the partner determinatin procedures.
    Have you assigned Customer hierarchy to your sales area
    Have you created Customer with 0012 Account group.
    Now you need to assign the customer creatd using 0012 to the customer 0001 account group.
    Have you maintainted the Customer heirarchy in VDH1n transaction..
    Here you need to assign 0001 account group customer to 0012 customer
    If u have maintained all these settings correctly you will get the hierarchy customer in SO.

  • 0ORGUNIt time dependent hierarchy not showing all valid nodes in BO , but in BW its correctly shown

    Hi All,
    We have 0ORGUNIT hierarchy shown in one of the Webi reports. 0ORGUNIT is time dependent hierarchy.
    In BW report we can see below nodes for hierarchy
    Hierarchy                     Valid From         Valid To
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
        Z05 Branch 2                 01.10.2013        31.12.9999 - Child Node
        Z05 Division                   09.12.2013        31.12.9999 - Child Node
    In BO webi we can see only two nodes
    Z05 Root Company        01.07.2013        31.12.9999 - Parent node
           Z05 Division                   09.12.2013        31.12.9999 - Child Node
    Any idea why in BO webi the other node is not shown ? This is happening only for time dependent hierarchy and only in BO not in BW.
    Thanks,
    Shraddha

    Hi Shraddha ,
    Check at webi query panel level any restrictions applied to hierarchy levels.
    Check at BEx query level,select 0ORGUNIT ,hierarchy -Expand to level .
    Here specify Max level.
    lastly, check any filters/restrictions applied on data.If yes,remove restrictions.

  • Actual cost in the workplan task screen (hierarchy) not show value.

    Hi all,
    Could you advice me about actual cost if I want to show in the workplan task screen (hierarchy).
    Thank you.

    Well, then just check the master data setting in Query designer--> choose 0Costcenter and check the properties > choose advanced tab> under filter value Selection during Query Execution . check for these options
    1.Only Posted Values for Navigation
    2.Only values in Infoprovider
    3.Values in Master data table
    4.Characterstic Relationship.
    You need to choose the 3rd opitions as you need to read the master tables for 0costcenter.
    Hope it helps,
    Cheers,
    Balaji

  • Crystal Parameter Hierarchy Pick List not showing in Infoview

    Hello,
    We are having an issue with crystal reports not showing the hierarchy pick list in infoview.
    We have 3 environments, Dev, QA, Prod.
    Business Objects environments consist of 3 separate servers
    Dev
    Windows Server 2003 64bit
    BOXI 3.1 with Service Pack 2
    Integration Kit 3.1 with SP2
    Crystal Reports V1 SP2
    QA
    Windows Server 2003 64bit
    BOXI 3.1 with Service Pack 2
    Integration Kit 3.1 with SP2
    Crystal Reports V1 SP2
    Prod
    Windows Server 2003 64bit
    BOXI 3.1 with Service Pack 2
    Integration Kit 3.1 with SP2
    Crystal Reports V1 SP2
    SAP BW Environments consist of 2 server landscapes, with DEV / QA sitting on 1 and production on its own.
    ServerA
    Dev and QA
    ServerB
    Prod
    We create a crystal report in Dev BOBJ, and publish to DEV SAP BW system sitting on ServerA.
    The picklist shows hierarchy properly in Dev Infoview.
    We then LCM the report to QA BOBJ, and Do Not publish to QA SAP BW system sitting on ServerA.
    We transport the role that the report was published to, from Dev SAP BW to QA SAP BW
    The picklist shows hierarchy properly in QA Infoview.
    We then LCM the report to PROD BOBJ, and Do Not publish to PROD SAP BW system sitting on ServerB.
    We transport the role from QA SAP BW to Prod SAP BW
    The picklist does NOT show hierarchy properly in Prod Infoview.
    We are a bit confused on why the picklist works properly on QA Infoview without publishing, but will not work on Production Infoview.
    Is it because the repository objects for the picklist contain some server paths? (Since DEV and QA sit on the same server "ServerA")
    Do we need to publish in production SAP BW for the hierarchy pick list to function?
    Any help would be appreciated,
    Thanks!
    Nick

    Hi Nick,
    Did you get this resolved? We are encountering the same issue.  We have migrated our report from QA to Prod using BW Transport and then used BW Publisher to publish to BOE.  The parameter list shows in InfoView for Dev and QA, but not Prod.
    We're using BOE SP2 FP 2.8

  • Customer Hierarchy field not showing in change customer master

    Hi all,
    We are trying to upload customer master Hierarchy field A and Customer Number  in XD02 But Customer Hierarchy field not displaying in XD02 i check in account group OBD2 and OB20 setting its showing optional entries only still its not showing in XD02 But while creating customer master in XD01 its showing
    can any one guide me where i need config
    Thanks
    Rajesh

    Hi,
    You check out in OBD2 & in OB20,
    R u selected right account group in OBD2, check it.
    Kapil

  • Hierarchy node Variable: F4 Help - Not showing Master data values

    Hi,
    We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
    In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
    I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
    Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
    There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
    Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
    Thanks in advance for your help.
    Regards,
    Femmie.

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • Product hierarchy is showing 'Not assigned Materials' in Bex Report

    Dear Gurus,
    I have loaded product hierarchy to 0material from 0PROD_HIER_LPRH_HIER successfully. In Bex report if i use product hierarchy nothing showing to me and it is showing message in one row like 'Not assigned Materials.
    If i remove the Hierarchy i am able to see all materials in the report.
    I have searched in sdn but i didnt get any help.Please help me in this issue.
    Thanks & Regards,
    chandu

    Hi Ravi,
    I have run the Hierarchy change run for 0material.but again it is showing same message 'not assigned materials'.
    Regards,
    chandu

  • Hierarchy selection does NOT show upper level

    Hi
    I am using BI 7.0 with SP 20 with WAD (No Bex Anl).
    I implemented Hierarchy of 0ORGUNIT and when I select a node in the middle
    of the Hier the reports starts with the Org from that point and it does
    not show the nodes above.
    How can I make it show all levels uppword?
    Thanks
    Edan
    Edited by: Edan99 on May 4, 2009 4:05 PM

    Hi Edan,
    I am facing problem while loading 0ORGUNIT Hirarchies. I saw in forum that you have loaded sucessfully.
    Error: InfoObject 0ORGUNIT in BW does not support any hierarchies
    when execute infopackage this error is getting.
    I am in BI 7.0 environment.
    Can you help to load 0ORGUNIT Hirarchies data. because of this no report is display Data.
    Regards
    Vijay.

  • Hierarchy node in query rows not showing values in report

    Hi sdn
    I'm taking hierarchy node on rows and some plan and actual values on columns but i'm unable to get values in the report for only plan values
    How did I reconcile the values whether that value is available in hierarchy or corresponding value's for plan data is available in the cube,pls give me clues
    rubane

    Hi,
    Could you please share the steps you have taken to fix the problem?
    We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
    Any help on this would be greatly appreciated.
    Thanks,
    Krish

  • CN41N and S_ALR_87013533 report not showing Production order planned cost

    Hi Experts,
    I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
    1. CN41N repoet does not show individual material cost planned in BOM.
    2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
    Example :
    1. CN41N report :
    Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
    2. S_ALR_87013533
    This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
    Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
    Thanks in advance.
    Ashish

    Hi Ashish,
    I doubt whether Item level reporting  in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
    Please check the following links:
    https://scn.sap.com/thread/1743833
    (In the above thread,focus on  Mr. Mohamed Rafi comment.)
    http://scn.sap.com/thread/3530080
    http://scn.sap.com/thread/1311820
    Order cost plan in report CN41N
    Display of plan cost., CN41N | ABAP, SAP, benX AG, benXBrain,&…
    Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
    Regards
    Saurabh

  • Data is not showing in Column

    Hi experts,
    I have two Fact Tables F1 and F2 and both having the join with Dimensions D1,D2.
    when i pick the data from D1,D2 and measure from F2 and F1 then the report is runnug fine. but when i pick data from D1,D2 and some character from F2 and measure from F1 . then the column from F1 does not showing any data.
    Please suggest.
    S

    This is expected behaviour from the BI Server. F1 doesn't know how to aggregate over the character column from F2.
    There are two solutions.
    1) Add an aggregation rule to the character column of F2.
    If this is not what you want:
    2) Create a logical dimension for the character column of F2. Create a hierarchy for this new dimension. Set the logical level of measure F1 to grand total level of new dimension.

  • Root/Totals item in FS Item hierarchy - not flipping properly

    Hi all,
    can you point me towards a solution?  I think I am missing something:
    in the hierarchy, but default the <b>Root/Totals Item</b> appears above the rest of the nodes.  I need to display it on the bottom.
    I've gone to the DW Workbench and looked at the appropriate hierarchy.  I changed the attributes to to have the Root/Totals item appear Below in the query.  Here is what I am getting, and what I am not:
    1. In BEx Analyzer, the query works properly, showing the Root at the bottom.
    2. In WEB Analyzer, the query still shows the Root on top
    3. If I use the characteristic (0CS_ITEM) as a navigational attribute for another characteristic in another cube, the root node also will not show on top.
    Any suggestion?  Should I open up an OSS message?
    Thank you for your help

    Hi Inge,
    Just ideas:
    1. Try to use the check of CoI settings - help in error messages may give you some clue.
    2. Many settings in SEM-BCS are time-dependent. Check if you use different version and/or different periods - missing settings may sit somewhere there.

  • "Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

    Hi
    We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
    During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
    as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
    source site" but data gathering process is completing successfully.
    Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
    Thanks in Advance
    srkr

     Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
    site" but data gathering process is completing successfully.
    Earlier all the shared DPs are showing under  Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

Maybe you are looking for