How about joining IEEE 802.1X wired client to a AD domain ?

http://technet.microsoft.com/en-us/library/bb727033.aspx
This nice Technet link says clearly that there is three methods could be used for joining Wireless IEEE 802.1X client to a domain. Do these methods also apply for joining Wired IEEE 802.1X clients to a domain ?

Hi,
In some cases, routers or firewalls drop packets because they are configured to discard packets that require fragmentation.
Did you use NPS for authentication?
Follow this procedure to lower the maximum size that NPS uses for EAP payloads by adjusting the Framed-MTU attribute in a network policy.
Configure the EAP Payload Size
http://technet.microsoft.com/en-us/library/cc755205%28v=ws.10%29
Hope this helps.

Similar Messages

  • IAS and CTA 802.1x wired client?

    Hi,
    We have IAS working with 802.1X authentication. All is good except when we enable dynamic VLAN assignment we come across the Winlogon issue as per MS KB article 935638.
    We do however have available the CTA 802.1X wired client. From what I have read though it requires ACS due to use of EAP-FAST. Is this correct or is there some way I can get CTA 802.1X wired client working with MS IAS RADIUS?
    Thank you

    You will have to use ACS for authenticating using EAP-FAST for CTA 802.1x wired clients. It is not possible to get CTA 802.1X wired client working with MS IAS RADIUS.

  • How to join client to windows server 2012r2 remotely

    Hi.. please.. 
    My Company Just got a new branch far from our recent location.. i am surpose to connect new computers as users from the new location to the domain controller in the head office.. i need to add this client so as to be able to use the Software used in the
    headoffice ...
    i will appreciate a quick response.. please help

    Hi,
    Based on your description, I understand that you want to join some remote client computers to a domain. Would
    you please let me know how setup the connection between the remote client computers and the domain controller?
    If connected in LAN, you can change
    Workgroup to Domain in “Member of” option in System Properties. For more details, please refer to following article and check if can help you.
    How to Join Your Computer to a Domain
    If connected via internet, you may need to establish a VPN connection with the domain from client computer, then
    join the client computer to domain.
    Please refer to following thread and check if can help you.
    Joining
    remote computer to a domain
    If anything I misunderstand or any update, please don’t hesitate to let us know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • 802.1x wired authentication via PEAP, MD5

    Hi everyone,
    Thank you for taking the time for reading this, I am implementing a security solution and wanted to take th benefit of implementing 802.1x over wire. I have been searching a bit but no much info from start to finish on how to implementing this solution,
    i would really appreciate if someone could point me some where  to find  detailed instruction on how to do this, as so far i have been configuring in multiple way bit no result out of it. Still a orange port color on my switch, that means the first
    hop of security work but the next no.
    Thank you in advance to read this.

    Hi,
    According to your description, my understanding is that you want to deploy 802.1x wired authentication via PEAP, MD5 and need instructions about this.
    Some articles and just for your reference:
    802.1X Authenticated Wired Access Overview
    https://technet.microsoft.com/en-us/library/hh831831.aspx
    802.1X Authenticated Wired Access Design Guide
    https://technet.microsoft.com/library/dd378864(WS.10).aspx
    IEEE 802.1X Wired Authentication
    https://technet.microsoft.com/en-us/magazine/2008.02.cableguy.aspx
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to join T510 Thin Client to Domain

    I need to join my Hp T510 thin client devices to my Windows domain. (I need to place them all in a certain OU in Active Directory). Is this even possible? I have been reading around about this, and I get the feeling that some people have managed to do this, but I don't know how. Any help please? (I have been able to do it with my T520 devices, but the T510s are different). 

    I'm not aware of any particular tie-in between Windows 7 and Domain Controller and Samba and OS X Server Open Directory LDAP Services.
    Samba did provide limited Domain Controller capabilities and can use Domain Authentication, but the Apple installation from 10.6 is an old release and I've had some problems getting that older stuff to work.  You'll likely have to hand-manage Samba to get this to work, by following the directions at the Samba.org web site, too.
    The best resource I've encountered for digging around in this topic area is the archives of the Mac Enterprise mailing list.
    FWIW, Microsoft has (migrated from? abandoned? deprecated?) Domain Controller authentication in favor of Active Directory some years ago, and Apple has abandoned Samba in more recent releases; this is a dead end.  If you are using Windows Server and Active Directory, then OS X Server can be configured in what's called a Magic Triangle configuration; where you have Windows handling Windows authentication, and OS X Server handling OS X authentication, and coordinating across the two.  Or (with newer OS X releases) Apple has improved integration with Active Directory.

  • IEEE 802.11k roaming with client and cisco router

    I found information that Cisco supports IEEE802.11k WLAN standard with their routers.
    http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/11rkw_DeploymentGuide/b_802point11rkw_deployment_guide_cisco_ios_xe_release33/b_802point11rkw_deployment_guide_cisco_ios_xe_release33_chapter_010.html
    If read this article I think for assisted roaming I only need neigbor reports but IEEE 802.11k standard also defines several reports like channel load report etc.
    Do I need these other reports also for roaming decisions if my device is a client?

    The reason why you can't remote desktop is because you have configured the following static PAT statement that unfortunately take precedence over your NAT exemption:
    ip nat inside source static tcp 10.10.1.2 3389 192.198.46.14 3389 extendable
    Do you require RDP with the public IP? if you don't and only require RDP via VPN, then please take the static PAT statement out, and RDP via VPN will work.

  • Components of Instant Client - how about NLS

    Hi,
    since Instant Client only includes some library files, how could the Global Language Support work without files under $ORACLE_HOME/nls/data provided?
    My testing web page of PHP just displays "??" from database.
    How do I make sure the Linux client and 10g server(Windows)have matching character resources; e.g., is NLS_LANG=TRADITIONAL CHINESE_TAIWAN.ZHT32EUC correct?
    Is there any approach to get nls/data files with only "Instant Client" lib installed.
    Thanks a lot!

    Thanks a lot as you are a guest! It works after NLS_LANG character set to be ZHT16BIG5 in Apache envvars file.
    Previously "TRADITIONAL CHINESE_TAIWAN.ZHT32EUC" environmental variable was set in /etc/profile and web page but displayed only garbled characters without ORA_ error message.

  • Question about Airport Express in WDS bridge mode with wired clients

    I am looking to buy an Airport Extreme N router, and then use the Express I already have to extend my network using WDS. I intend to setup the Express as a bridge in WDS mode and then connect a wired client to the Express. The question is can I connect a multi port switch or hub to the Express so that multiple wired clients can use the bridge or does Express only support one wired client. I looked at the FAQ at http://docs.info.apple.com/article.html?artnum=108038 but it doesn't address that.
    Thanks

    Hmmm, I haven't actually tried that myself, but it should work since, as a Remote Base Station in a WDS, the Ethernet port on the AX acts like a LAN port.

  • How to join the AP to the WLC

    Hi All,
    I am new to Cisco wireless solution and would like to ask how to add the AP to the WLC properly. All Cisco 1041 and Cisco 2500 WLC are new. I connect those AP and WLC to the switch without any VLAN tag and the AP can gain the IP address from our DHCP correctly. However, the AP 1041 could not join the WLC successfully. Here is the log. I really do not have any idea about that and hope someone can help. Many thanks.
    WLC: Cisco 2500
    IP Address: 192.168.1.225
    version: 7.4.100.0
    AP: 1041
    IP Address (DHCP): 192.168.1.195
    version: 15.2(2)JB
    I also checked the following item.
    - WLC already enable Accept Manufactured Installed Certificate (MIC) in WLC -> Security -> AP Policy
    - WLC can ping AP and vice versa
    - WLC has 5 AP license
    - All configuration are default setting
    - Tried to issued join command in AP manually but no luck "lwapp ap controller ip add 192.168.1.225"
    AP 1041 Log
    *May 16 14:02:41.145: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down*May 16 14:02:41.180: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up*May 16 14:02:42.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down*May 16 14:02:42.172: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down*May 16 14:02:42.176: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset*May 16 14:02:43.197: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up*May 16 14:02:44.197: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up*May 16 14:02:51.178: %CAPWAP-3-ERRORLOG: Go join a capwap controller *May 16 14:02:52.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.225 peer_port: 5246*May 16 14:02:52.905: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.225 peer_port: 5246*May 16 14:02:52.906: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.225
    *May 16 14:02:52.908: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.*May 16 14:02:52.908: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.*May 16 14:02:52.909: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller*May 16 14:02:52.909: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 192.168.1.225., 1)16 14:03:11.059: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)*May 16 14:03:11.059: %CAPWAP-3-ERRORLOG: GOING BACK TO DISCOVER MODE*May 16 14:03:11.060: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 192.168.1.225:5246*May 16 14:03:11.111: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255*May 16 14:03:11.111: bsnInitRcbSlot: slot 1 has NO radio*May 16 14:03:11.132: %CAPWAP-3-ERRORLOG: Binding Config Initialization failed for binding 1*May 16 14:03:11.138: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down*May 16 14:03:11.174: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up*May 16 14:03:12.138: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down*May 16 14:03:12.165: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down*May 16 14:03:12.170: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset*May 16 14:03:13.190: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up*May 16 14:03:14.190: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    APbc16.65d6.7e4b#show ip int briefInterface                  IP-Address      OK? Method Status                ProtocolBVI1                       192.168.1.195   YES DHCP   up                    up      Dot11Radio0                unassigned      NO  unset  up                    up      GigabitEthernet0           unassigned      NO  unset  up                    up      GigabitEthernet0.1         unassigned      YES unset  up                    up     
    WLC 2500
    (Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.4.100.0Bootloader Version............................... 1.0.16Field Recovery Image Version..................... 1.0.0Firmware Version................................. PIC 16.0Build Type....................................... DATA + WPSSystem Name...................................... S_HK_AC_CT2504_1System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.1279IP Address....................................... 203.85.90.225Last Reset....................................... Power on resetSystem Up Time................................... 1 days 0 hrs 29 mins 1 secsSystem Timezone Location......................... System Stats Realtime Interval................... 5System Stats Normal Interval..................... 180
    (Cisco Controller) >show ap join stats summary allNumber of APs.............................................. 3 Base Mac             AP EthernetMac       AP Name                 IP Address         Statusbc:16:65:d6:7e:40    bc:16:65:d6:7e:40    APbc16.65d6.7e4b        192.168.1.195      Not Joinedbc:16:65:d6:7e:4b    N A                  N A                     192.168.1.195      Not Joinedf4:1f:c2:d0:bb:20    bc:16:65:d6:7e:4b    APbc16.65d6.7e4b        192.168.1.195      Not Joined
    (Cisco Controller) >show interface summary Number of Interfaces.......................... 3Interface Name                   Port Vlan Id  IP Address      Type    Ap Mgr Guest-------------------------------- ---- -------- --------------- ------- ------ -----management                       1    untagged 192.168.1.225   Static  Yes    No   virtual                          N/A  N/A      1.1.1.1         Static  No     No  
    Rgds,
    Jacky

    leolaohoo wrote:Something is missing from the output to the command "sh sysinfo".  What country code did you enable? On the AP, post the output to the command "sh version" and "sh inventory".
    Hi Leolaohoo, thanks for your prompt reply. Please it below. I am using Hong Kong as the country code in WLC. Thanks.
    WLC
    (Cisco Controller) >show sysinfoManufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.4.100.0Bootloader Version............................... 1.0.16Field Recovery Image Version..................... 1.0.0Firmware Version................................. PIC 16.0Build Type....................................... DATA + WPSSystem Name...................................... S_HK_AC_CT2504_1System Location.................................. System Contact................................... System ObjectID.................................. 1.3.6.1.4.1.9.1.1279IP Address....................................... 192.168.1.225Last Reset....................................... Power on resetSystem Up Time................................... 1 days 1 hrs 15 mins 49 secsSystem Timezone Location......................... System Stats Realtime Interval................... 5System Stats Normal Interval..................... 180--More-- or (q)uitConfigured Country............................... HK  - Hong KongOperating Environment............................ Commercial (0 to 40 C)Internal Temp Alarm Limits....................... 0 to 65 CInternal Temperature............................. +31 CExternal Temperature............................. +36 CFan Status....................................... 4100 rpmState of 802.11b Network......................... DisabledState of 802.11a Network......................... DisabledNumber of WLANs.................................. 2Number of Active Clients......................... 0Memory Current Usage............................. UnknownMemory Average Usage............................. UnknownCPU Current Usage................................ UnknownCPU Average Usage................................ UnknownBurned-in MAC Address............................ F0:29:29:88:98:20Maximum number of APs supported.................. 5
    AP
    APbc16.65d6.7e4b#show verCisco IOS Software, C1040 Software (C1140-K9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2012 by Cisco Systems, Inc.Compiled Tue 11-Dec-12 04:03 by prod_rel_teamROM: Bootstrap program is C1040 boot loaderBOOTLDR: C1040 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA6, RELEASE SOFTWARE (fc1)APbc16.65d6.7e4b uptime is 20 hours, 32 minutesSystem returned to ROM by reloadSystem image file is "flash:/c1140-k9w8-mx.152-2.JB/c1140-k9w8-mx.152-2.JB"Last reload reason: This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately.A summary of U.S. laws governing Cisco cryptographic products may be found at:http://www.cisco.com/wwl/export/crypto/tool/stqrg.htmlIf you require further assistance please contact us by sending email [email protected] AIR-LAP1041N-E-K9    (PowerPC405ex) processor (revision B0) with 81910K/49152K bytes of memory.Processor board ID FGL1718S4RMPowerPC405ex CPU at 333Mhz, revision number 0x147ELast reset from reloadLWAPP image version 7.4.100.01 Gigabit Ethernet interface1 802.11 Radio32K bytes of flash-simulated non-volatile configuration memory.Base ethernet MAC Address: BC:16:65:D6:7E:4BPart Number                          : 73-14034-06PCA Assembly Number                  : 800-34273-07PCA Revision Number                  : A0PCB Serial Number                    : FOC17160EPLTop Assembly Part Number             : 800-34284-05Top Assembly Serial Number           : FGL1718S4RMTop Revision Number                  : A0Product/Model Number                 : AIR-LAP1041N-E-K9   Configuration register is 0xF
    APbc16.65d6.7e4b#show inventoryNAME: "AP1040", DESCR: "Cisco Aironet 1040 Series (IEEE 802.11n) Access Point"PID: AIR-LAP1041N-E-K9 , VID: V05, SN: FGL1718S4RM
    Thanks and Best Regards,
    Jacky

  • Sharing internet to wired client using Airport Express

    hey
    I'm trying to connect a client to my home network through ethernet to a airport express which is wirelessly connected to a Airport extreme base station (802.11n).
    This is what i would like my setup to be.
    ADSL to modem to Airport extreme wirelessly to Airport Express wired to client (will eventually be a xbox media center).
    It says in the apple FAQs that this is possible by configuring the AX as a WDS remote or relay. Since i have no desire to extend the rage on the network, I've made it a WDS remote, but I tried to connect my macbook to it over ethernet to test, which didn't work. Is there any settings that need to be changed it the connection is going to be shared to a wired client?
    Thanks
    Mike

    I have the xact same question as Mcgio. Earlier in this thread there was mention of WDS. From what I have gathered elsewhere, WDS is only necessary if you want to extend your wireless network? That is not what I want to do - I essentilly want to extend my wired network using the AX wirelessly.
    I ask about WDS because it does not appear that my Netgear WNR834M router supports WDS (nothing about it in config or the manual).
    Will what we are trying to work and what do we need to do?

  • More explanations about MESH and 802.11n

                       Hello,
    I just begin WiFi installations and I have some existential questions.
    I have 5 Cisco 1552-E APs. One of them is wired to LAN and act as RAP, the 4 others are MAP.
    On each AP, I use 1, 6, 11 channels as 2,4GHz non-overlapping channels.
    As I have a 802.11n network, I use 5GHz band with non-overlapping channels too. Because I'm in Europe and outdoor, I want to use 100, 112, 124, 136 and 140 channels.
    But all the 5 APs have a MESH backhaul 5GHz link to connect to LAN.
    Please clarify my mind, because I don't understand how it is possible for 2 APs, to communicate between themselves on a different 5GHz channel ??
    Thank you,
    Clement

    There is a new model which has 3 antenna ports for the 5ghz and 3 antenna ports for the 2.4ghz. This allows you to use one of the Cisco mesh patch antennas for a longer backhaul shoot to the RAP or even a MAP. It's hard to say what you can do but that gives you more options.
    Cisco Aironet 1552E/1552EU External Antenna Access Points
    The Cisco Aironet 1552E/1552EU Outdoor Access Points are the standard models, dual-radio system with external antenna ports that are compliant with IEEE 802.11b/g/n standards (2.4 GHz) and 802.11a/n (5-GHz). The 1552E has three external antenna connections for dual-band omni or directional antennas. The 1552EU has six external antenna connections, three for 2.4 GHz and three for 5 GHz antennas, that support omni or directional antennas. They have Ethernet and fiber Small Form-Factor Pluggable (SFP) backhaul options, along with the option of a battery backup. These models also have a PoE-out port that can power a video surveillance camera or other devices. Highly flexible models, the Cisco Aironet 1552E/1552EU are well equipped for municipal and campus deployments, video surveillance applications, mining environments, and data offload.
    Sent from Cisco Technical Support iPhone App

  • Who is really doing 802.1x wired

    I am creating a lab environment to test 802.1x prior to implementing it into production.
    I wanted to know what is the pros and cons of this security feature at layer 2?
    How does it really work behind the scenes?
    The reason why i want to implement this feature/function is becuase I'm just one of two network administrators who manage well over 800 networking device (totally cisco shop) and 62 remote sites, and we struggle with the moves, adds, and changes, port vlan assignment (management), users moving there workstations, users moving there voip phones, etc. If anyone can speak on implementing 802.1x wired in a medium to large large network i will be happy to hear about the real life pros and cons

    We implemented 802.1x in my previous company (similar size as yours)
    You are right it can brings lot of problems.
    Before we deployed management solution Cisco LMS 3.0... It really helped us with configuration, config backup, network overview, discrepancy reports, user tracking, troubleshooting (get rid of fake hubs etc..) ... It cleaned our network and saved lot of time .. I suggest to have good management solution before you move to 802.1x
    We also separated devices what are not able to authenticate via 802.1x (printers, faxes) to separate VLAN
    Than we started in one segment (vlan) which was most stable (no changes, no moves)...
    It worked fine.. Than we smoothly moved to other vlans step by step..
    The true is that it took lot of time (one of my colleagues was working only on this project for some time).. But we managed it and it works fine.. It would also asked your cisco vendor for consultancy and help
    Hope that helps
    M.

  • How to set up an integrated wired and wireless network

    I have an iMac 17" 1GHz connected to a ethernet hub which in turn is connected to a DSL modem and from there to my ISP. I also have a MacBook Pro wirelessly connected to an AirPort Express; the AE is connected to the same ethernet hub through its ethernet port.
    I can connect to the Internet wirelesly using the MacBook Pro, but I can not seem to connect to the iMac.
    How can I keep the iMac wired and the MacBook Pro wireless, but see both on a network? The AE instructions don't seem to have an example for this kind of network.
    Any help would be greatly appreciated!
    Cheers,
    Martin
    MacBook Pro   Mac OS X (10.4.6)  
    MacBook Pro   Mac OS X (10.4.6)  

    Martin,
    As Frank said, you'll need a router with DHCP and NAT abilities (nearly all have this) connected to the modem.
    But just in case your "ethernet hub" is actually a router, just re-configure the AE not to distribute IP addresses - AirPort Admin Utility - Network tab. Try that and let us know.
    For minimal clutter, if you were DSL broadband instead of cable, you could sell the modem, sell the ethernet router, sell the Airport Express and buy a single Ethernet and Wireless DSL modem router - for less than the price of the AE. Some people like to keep the modem separate to make upgrades to the modem cheaper. My solution is to buy a decent modem in the first place, ie make sure it has ADSL2+. Almost all modem/routers do this now, even my ancient ones have firmware upgrades to offer this.
    For minimal spend, you can pick up an Ethernet router for about $30. Just replace your ethernet hub with it.

  • Cisco Prime Infrastructure 2.1 wired client show Wrong port speed.

    Hi,
    i have odd issue for some reason the port speed in the wired clients shown a wrong speed,
    can some explain how the speed detremained and why i'm getting a wrong speed port of 10mb for a pc/host when my network is at least 100mb,
    thanks

    Hi all,
    after a TAC with cisco they open a new BUG # CSCur33328    
    https://tools.cisco.com/bugsearch/bug/CSCur33328/?reffering_site=dumpcr
    thanks

  • How to join local computer to virtual server domain ?

    Hi everyone,
    I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
    Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
    all local servers is something right to do and how to do.
    What I have done:
    1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
    2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
    3. Installed active directory and configured the domain forest.
    What I need to do:
    1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
    Extra questions:
    1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
    2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
    Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
    Sincerely,
    Chee-Kian

    Greetings!
    I assume there is connectivity between on-prem device and DC on Azure VM.
    You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
    It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
    With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
    http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
    Hope this helps.
    Thank you,
    Arvind

Maybe you are looking for

  • How can I update all user profile entries at once?

    I test web applications with Firefox and use the -P (user) -no-remote options on the command line to keep the sessions independent. In other words, I have created many dozens of desktop shortcuts with specific users and within each instance of Firefo

  • Unsupported File Format (nokia lumia 520)

    My Nokia Lumia 520 will not post pictures to social networks, transfer them to my computer, set them as my lock screen or even edit them. I purchased the phone only a couple of months ago and it was working perfectly, but then it would just come up w

  • Very slow computer and getting worse

    My computer seems to be bogging down. Commands result in the beach ball of doom more and more frequently and it rolls longer. I found a 15.9 var file in "private" which seems out of normal...maybe this is a problem? I would appreciate any advice or s

  • Migrate Adobe Master Collection to Mac

    I purchased Adobe Master Collection CS5 a few years ago and use it on my desktop and laptop PCs. I have since misplaced the installation CD/DVDs. I want to purchase a new Mac laptop and use my Master Collection license for the Mac laptop. I would dea

  • Are there Slideshow controls?

    The slideshow feature on Apple TV of my pics runs them out of date order and rotates some of them on their sides.  Can I control this?