How are reported and drafting misspellings found in a book?

I found some spelling errors and drafting in the books I read but can not find who to contact to report them and corrected.

You could try emailing the Publisher directly, and posting Reviews. Apple is just a store and is not going to correct anything. But you could bring it to their attention by using the Report a Problem link on your receipt.

Similar Messages

How are contract and service order related....urgent

Hi all
I am ABAP consultant...
I am working on Service contract Cost Management threshold alert report...
I want clear idea as to how are contract and service order related....
BAsed on contract type and contract start and ,end date,sold to party....
i need to get contract ,item , service order no: , and i have to calculate <b>INTERNAL ,EXTERNAL LABOUR, INTERNAL,EXTERNAL material COST</b>
plz help me out...
Thanks in advance,
Madhavi.

Dear Madhavi,
http://www.erpgenie.com/abap/tables_sd.htm
VBFA Sales Document Flow
KONV Conditions for Transaction Data
KONP Conditions for Items
LIKP Delivery Header Data
LIPS Delivery: Item data
VBAK Sales Document: Header Data
VBAP Sales Document: Item Data
VBBE Sales Requirements: Individual Records
VBEH Schedule line history
VBEP Sales Document: Schedule Line Data
VBLB Sales document: Release order data
VBLK SD Document: Delivery Note Header
VBPA Sales Document: Partner
VBRK Billing: Header Data
VBRP Billing: Item Data
VBUK Sales Document: Header Status and Administrative Data
VBUP Sales Document: Item Status
VEKP Handling Unit - Header Table
VEPO Packing: Handling Unit Item (Contents)
VEPVG Delivery Due Index
Also, go through:
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen.

How are Aperture and Yosemite getting along so far?

How are Aperture and Yosemite getting along so far?
Hi guys,
Is it OK for Aperture users to take the plunge and update to Yosemite, or is it wiser to wait for kinks to be worked out first? I didn't find any reference to this matter so far on this forum or on the web. I may have mort worded it correctly.
Thanks for responding,
Raphael
Also,
Why do I constantly run into the statement: "You are not allowed to create or update this content" when I click on "Post"? So annoying ....

Aperture 3.6 and Yosemite have been a nightmare for me unfortunately. Every time I try to open it since updating to Yosemite it quits unexpectedly within 5 seconds or less. I've tried repairing and rebuilding the library but that did not help. Just get the below message.
Process:               Aperture [11391]
Path:                  /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier:            com.apple.Aperture
Version:               3.6 (3.6)
Build Info:            Aperture-500021000000000~3
App Item ID:           408981426
App External ID:       731142774
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Aperture [11391]
User ID:               501
Date/Time:             2014-10-20 22:06:19.726 -0400
OS Version:            Mac OS X 10.10 (14A388b)
Report Version:        11
Anonymous UUID:        554987CC-A5F5-9C57-2520-D55ECD699D4A
Time Awake Since Boot: 350000 seconds
Crashed Thread:        8
Exception Type:        EXC_ARITHMETIC (SIGFPE)
Exception Codes:       EXC_I386_DIV (divide by zero)

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

"How are local and state taxes setup/updated when employee's address change

Hi All
I wanted to know "How are local and state taxes setup/updated when employee's address changes . - How is it done in SAP? -
Thanks in Advance

This defeats the purpose of trying to centralize SAP-related web resources on the SAP server. Typically IIS/Apache or other non-SAP servers are under the control of IT and not the SAP BASIS group.
We simply would like to have a centralized location to store static web files so that they are not overwritten during Portal support pack applications.

How are objects and values passed in rmi?

how are objects and values passed in rmi?

In java there are two mwthods of passing aruguments and returning results.
1) by value
2) by reference.
While invoking local methods, java passes primitive types by value and objects by reference.
However while invoking remote methods both these data types are passed by value. Except for the objects being exported. Reason being two different JVM's are involved and thus memory addresses references of one are meaningles for the other. However "pass by value" for values of type object are implemented as deep copy.

How to copy and paste text from one photo book page to another.

hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
This question was solved.
View Solution.

Hi DG.
The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
Our customer support team would be happy to walk you through the process. Contact them at [email protected]
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

How are attributes and texts for a master data linked and targeted to ...?

Our previous consultants used to load data to master data 0MATL_GROUP.
1. RSA1 -> InfoProvider -> Select 0MATL_GROUP or 0MATL_GROUP___T
Check these above two and find the records loaded are both 1,216 for Language EN.
We check the data flow of this master data (0MATL_GROUP or 0MATL_GROUP___T) and find there are four branches which target 0MATL_GROUP:
branch 1: 0MATL_GROUP is itself an InfoSource and the datasource is 0PROD_CATEG_R3_MAP_ATTR. However under this datasource, there is no any InfoPackage, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 2: Through InfoSource 0MATERIAL_ATTR. However the InfoPackage under this InfoSource target data load to 0MATERIAL but not 0MATL_GROUP, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 3: Through InfoSource ZMATL_GROUP_ATTR and it's corresponding datasource Z_MAT_GROUP_ATTR. InfoPackage monitor shows the data load record for this datasource is 490 (Run RSA3 on R3 for this datasource also gives the same record count).
branch 4: Through InfoSource 0MATL_GROUP_TEXT and it's corresponding datasource has the same name. InfoPackage monitor shows the data load record for this datasource is 1190 for Language EN (RSA3 on R3 for this datasource gives the same count for language EN).
2. InfoObj. 0MATL_GROUP
1). Master data tab (/BI0/PMATL_GROUP): 526
2). Text table (/BI0/TMATL_GROUP):
1657 (includes both EN and other lan-guages), for EN: 1190.
3. Check R3 Table T023T (Material Group Descrip-tions) for EN: 1190.
Our questions are:
1. The InfoProvider 0MATL_GROUP and 0MATL_GROUP___T
both have counts of 1,216 for Language EN. And for the four branches in the data flow, only 3rd and 4th branches feed data to it. 3rd branch (datasource Z_MAT_GROUP_ATTR) feed count is 490 and 4th branch (datasource 0MATL_GROUP_TEXT) feed count is 1190 for Language EN. We wonder how attribute and text data are corelated to each other and with it's master data. Obviously 1,216 is not equal to the sum of 1190 and 490, the how 1190 (text) and 490 (attribute) constitute the master data count 1,216?
2. Do we have to use 1st and 2nd branches to feed data to 0MATL_GROUP?
3. How InfoObj. 0MATL_GROUP Master data tab (/BI0/PMATL_GROUP) shows the count is 526? it should be 490 from the custom datasource Z_MAT_GROUP_ATTR, right? But why the count is different?
We would be appreciated any expert input!

Kevin,
can you check the data in Material Group charecterstic againest R/3. One moe thing check how these 4 branches Mapped to material Group?
Take the for Attributes it should be 490. it is 525. try to analyse what are the extra records comparing with Source. take the you found so and so meterial group extra then analyze from where is it getting extracted to BW i mean which DS.. (either branch 1 or brach 2 or branch 3 or 4). then check in R/3 side DS for the 4 branches. then you will know what exactly happening.
Analyze the data from step by step from r/3 to BW for each level. You will get clue.
Nagesh.
Message was edited by: Nagesh Ganisetti

OBIEE - How pause report and jobs - feed DW by ETL

Hi Experts,
I need to known, how can i block to run reports and existings jobs, during feeding my Data Warehouse by ETL.
User could be schedule new job, but this job will be running after refresh data on DW.
Thanks.
Edited by: user9051847 on 2013-04-26 09:19

Verify your repository design and make sure that you have defined count aggregate on fact column. You would also need to define the content level of each dimension in fact table.

How to report and verify counterfeit products?

If you have a suspected counterfeit Lenovo product, how do you verify it and report it to Lenovo? There should be a web site or contact number for this, but I haven't found anything.

Hello,
I would suggest contacting Lenovo support for the product/product line in question via phone and reporting the issue to them.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to report a inappropriate app found in the App Store on a iPhone?

I was on the App Store the other day and I found a app that I thought was inteeating enough to try out. Turns out the app was not very good at all. It was poorly managed (neglected almost) and there were several underage kids on the app and there was inappropriate content on the app that should not be shown to kids under a ceartain age. I am very concerned about more children being exposed to the app and I would like to know if there is any way I could report the app itself to apple or someone who will look into it.
Thank You

If you've downloaded the app then you can try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If not then you can contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How are passwords and certificates encoded in .mobileconfig?

The Enterprise Configuration Utility generates a human-readable XML file from which the iPhone can read and apply settings. However, the password and certificate portions of the file are encoded in such a way as to obfuscate them.
Does anyone know the encoding algorithm? I need to know so that I can generate my own XML file with my own custom-built tool. The following statement in the Enterprise Deployment Guide suggests that Apple supports custom tools: “This appendix specifies the format of mobileconfig files for those who want to create their own tools.” But it doesn’t mention the encoding algorithm.

Hi,
I'm trying to find out how user passwords are stored in Discovererthey are not. the discoverer do not maintain the users or the password.
the discoverer has 2 ways of connecting to the DB, none of them are users created by "discoverer" :
1. using database users, so that the users and passwords are stored in the db (fnd_users)
2. using apps mode, the discoverer users uses their oracle application connection string (user, responsibility).
and here the oracle application maintain the users and responsibilities.
Tamir

How are listbox and radiobutton items working in oracle forms?!?

Hi all.
I need some help over may be a standard case in every real project.
Imagine i have a db table PERSONS -> PERSONID, NAME, TOWNID, MATRIALSTATUSID
and table TOWNS -> TOWNID, TOWNNAME
and table MATRIALSTATUS -> MATRIALSTATUSID, NAME
And i have a standard oracle form with text item person name, listbox item with many towns (from TOWNS table) and the town of the concrete person is selected when the form is inited, after that we can change it by selecting other town and saving it to db.
The same is with matrial status but lets make it as radio group with 3 buttons married, not merried, divorced.
So my questions is how to populate the listbox(radiogroup) for 1 person by selecting data from other preferenced tables. And most important how this data is populated in the list box for example i.e. every town name is indexed in some way or what. I am a java developer and for example in java the control listbox item has two attributes the name(string) that is displayed in the listbox and a index binded for that name, and i work with indexes and show strings. I read about LOV but couldn't understand how to "index" the populated values. Is it possible.
And please can you give me some example of how to load (populate + set current town), change and (if it is possible) "index". The same case appears to be valid with radio buttons and check boxes.
You could give me some tutorials too, i cant find simple and focused on the problem examples.
Thank you.
Best Regards.

Hi,
well here is what i done for now.
First I created recordGroup with query SELECT GENDER, GENDERID FROM GENDERS (I want to select all genders and place them in listbox)
After that i created Listbox and on triger when-new-form i placed this code:
DECLARE
it ITEM:=FIND_ITEM('PERSONS_DETAILS.GENDER');
BEGIN
CLEAR_LIST(it);
POPULATE_LIST(it, 'RG_LIST');
DEFAULT_VALUE(NULL, 'GLOBAL.PERSONID');
IF :GLOBAL.PERSONID IS NOT NULL THEN
SET_BLOCK_PROPERTY('PERSONS_DETAILS', ONETIME_WHERE, 'PERSONID=' || :GLOBAL.PERSONID);
GO_BLOCK('PERSONS_DETAILS');
EXECUTE_QUERY;
:GLOBAL.PERSONID:=NULL;
END IF;
END;
Imagine i have a main form PERSONS that displays general information about many persons (the data is retrieved from PERSONS db table). The form PERSONS displays PERSONID, PERSON FIRSTNAME and PERSON LASTNAME. When a user double click on some row from the PERSONS FORM( i have tabular datablock that displays the person data) other form 'PERSONS_DETAILS' must be displayed with detailed information about the selected person. The data about the selected person is loaded well but i want gender to be listbox and the user can change it if he wants. So i have TABLE GENDERS 1:N with PERSONS and the table has GENDERID AND GENDER. When the user double clicks on single person i must populate the list with all possible genders from the GENDERS table and set the gender of the selected person. How to do that?
P.S.: The example with gender is not very good because it could be only male female, but don't worry about it. You may think about gender list as townlist :)
It finds me the GENDER LIST and populates it. After that i take the personId (that is global variable and comes from previous form) and displays all the data for the person with id personid.
When i compile the form it gives me :
FRM-30351: No list elements defined for list item.
List GENDER
Edited by: user9536806 on Nov 19, 2008 3:01 AM

How are BSIS and COEP linked?

Is there a link between BSIS and COEP tables?
Any reference doc number can be populated from COEP to BSIS automatically?
My requirement is to find how the BSIS-XBLNR can be linked to COEP?
pl advise.
Ven

To put my question in a better way,
when I enter a document with FB50, it generates controlling docs and also populates the FI doc number in the reference field of COEP.
When I post a document with KB21N, it does generate the FI docs but does not populate the reference doc field.
I need to find how is FB50 behaving. I tried to do a debug but not of much help.
- Ven

How are stacks and version sets handled in Mobile Albums

I am thinking of purchasing PSE 12. However, I have a question about the way stacks and version sets are handled in Mobile Albums within Revel.
When photos are in stacks or version sets in PSE 12 and I sync those photos to Mobile Albums in Revel, do the photos also appear as stacks and version sets in Revel? Or, do the photos which were in stacks and version sets in PSE 12 appear individually (i.e. un-stacked and not in version sets) in Revel?

I had the same issue. It took me a lot of time playing with the interface before I finally figured out the problem. Even though, when you double click a photo (single view) from within the default grid view, you "do" get the option to expand a stack or version set (not greyed out). However, it does not work. My frustration with that is that since it was not greyed out you would naturally expect it to be functional and it is not. In grid view the option is greyed out however that caused confusion as well since this option works in Elements 12 default view. So, one assumes it is a defect. Right? So the solution is to switch the grid view to detail view (view -> detail). Once you do that then the expand function works as expected. This should have been explained as I believe it is a change in functionality (user work flow) from earlier versions. I did try to find wording about this in the help file but no luck.

How are reported and drafting misspellings found in a book?

Similar Messages

Maybe you are looking for