How can I modify the High Speed Data Reader VI to show the time information in x-axis?

I am just a beginner learning the LabVIEW programming currently.
I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
However, when I read my data by using the High Speed Data Reader VI, it doesn't show its time information in the graph.
How can I modify the High Speed Data Reader VI to show the time information in x-axis?
I hope you can explain easily because I am a beginner.

Format the x axis to either absoulte or relative time.
You can do this by right clickingo n the graph and selecting x axis then formatting from the menu.
Thanks,
Naresh

Similar Messages

  • How can I modify the High Speed Data Reader VI to show correct time information in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    First, I couldn't seem to find that example either on computer or on the NI sites.
    The problem that we're running into is stated in the article that I pointed to - when real time VIs are running, then the OS will stop updating the OS clock. TO us it looks like the clock is losing time. There is a hardware clock on the PXI and it is read only during boot up to set the OS clock. Our discussions with NI have not led to a solution for this problem without checking the time on start and then checking the tick count (which does not lose time) and calculating what the current time is. No access to the hardware clock is supplied.
    We're still working on a simpler way to get accurate time.
    Rob

  • How can I modify the High Speed Data Reader VI to show correct time informatio​n in x-axis?

    I am just a beginner learning the LabVIEW programming currently.
    I have a PXI 6115 DAQ card and have to make a hardware timed acquisition VI for maximum performance. Thus I use the High Speed Data Logger VI for data acquisition.
    However, when I read my data by using the High Speed Data Reader VI, it doesn't show its correct time information in the graph.
    How can I modify the High Speed Data Reader VI to show correct time information in x-axis?
    I hope you can explain easily because I am a beginner.

    Hey Chunrok,
    I've modified the High Speed Data Reader VI slightly so that it now uses the scan rate of the data (as determined from the file) to set the scaling for the data points. If you wanted the start time to be a specific time you could use the start time obtained from your file to set the xscale offset as well.
    I hope this helps!
    Sarah Miracle
    National Instruments
    Attachments:
    Example.vi ‏281 KB

  • How do I use the High Speed Data Logger with multiple I/O devices?

    I am using the High Speed Data Logger vi to read from a 16 channel A/D card (NI PCI-MIO-16E). The project may require more than 16 channels. How can I use High Speed Data Logger to read from two A/D cards? Will it be able to write the data to one file?

    The High Speed Data Logger vi will not acquire and right to multiple DAQ boards at the same time without modification. LabVIEW is more than capable of doing this what you are trying to do, but you will have to modify the code.
    Regards,
    Anuj D.

  • How can i get my iPhone, ipad mini and mac to show the same  contacts calendar and notes

    how can i get my iPhone, ipad mini and mac to show the same  contacts calendar and notes

    Plug the phone and iPad into your computer and sync them.

  • Webapps.  How can I create a link to a page instead of showing the details-view

    I want my client to define what page a webapp shall point to in list-view, instead of showing the  details view, but I cant figure out how.  I have tried this, but it seams that tags don't work inside links:
    <a href="{tag_my_custom_link}">{tag_name}</a>
    .. does any one know how to do this?

    The problem is the format of your tag.  If your field name in the web app is "My Custom Link" then your tag is {tag_My Custom Link} (note the spaces).
    Cedric is right though, make sure the field is a textfield and not a hyperlink field in your web app.  If you use BC's new "Develop" tab up top you can navigate to your web app detail layout in /Layouts/Web Apps/<yourwebapp> and find "list.html".  Then, you can use the toolbox on the right (click the data tab) to insert tags without having to guess.  You can choose your custom field and insert the tag.

  • NIO Socket Reading - Intermittent Latency in High-Speed Data Reading

    Our application is reading data very fast over TCP/IP sockets in Java. We are using the NIO library with a non-blocking Sockets and a Selector to indicate readiness to read. On average, the overall processing times for reading and handling the read data is sub-millisecond. However we frequently see spikes of 10-20 milliseconds. (running on Linux).
    Using tcpdump we can see the time difference between tcpdump's reading of 2 discreet messages, and compare that with our applications time. We see tcpdump seems to have no delay, whereas the application can show 20 milliseconds.
    We are pretty sure this is not GC, because the GC log shows virtually no Full GC, and in JDK 6 (from what I understand) the default GC is parallel, so it should not be pausing the application threads (unless doing Full GC).
    It looks almost as if there is some delay for Java's Selector.select(0) method to return the readiness to read, because at the TCP layer, the data is already available to be read (and tcpdump is reading it).

    Have you tried profiling your application to confirm that the wait is indeed in the Selector.select() method, as you think?
    PS: Selector.select(0) will not return immediately if no channels are selected as you may assume. select(0) is the same as a regular select(): it will block until at least 1 channel is selected.

  • How can I record several channels of data at different rates with the same card?

    I am building an application in which I need to record several channels of DC voltage data to disk at different rates, for example, Channel 1 at 40 Hz, Channels 3-5 at 10 Hz, Channels 6-8 at 1 Hz, etc.
    All these channels are time-referenced, so I need to make sure data for channels recorded at slower rates line up with their correct time stamp.
    Currently, I am building all data into a 2D array one row per loop iteration.

    Hello;
    At this time, the NI DAQ boards have only one scan clock, so, you can only define one valid scan rate for all of your channels.
    The better approach for you is to sample all channels at the highest rate you will need, and then discard the samples you don't need to save.
    Hope this helps.
    Filipe

  • Using Swing how can we create socket and send data thru TCP/IP on the socke

    Hi All,
    Can anyone tell the link or answer to me about the Socket programming using Swing and data get & post onto the socket.
    Thanx & Regard
    Ashu

    swing is nothing to do with socket programing, you need to code using core java and API of net
    so please go through this link [http://www.javaworld.com/javaworld/jw-12-1996/jw-12-sockets.html]

  • How can I restore 3rd party app data from my backup in the cloud

    First a brief history. I use the iCloud to backup my iPad 2 and hardly ever synch it to itunes on my computer. I got the new iPad and restored the backup of my iPad 2 onto it.  All was fine except that an issue I had on my iPad 2's Safari had transferred over to my new iPad. That's is for another discussion. Anyhow I went to the genius bar and they said to just setup my new iPad as a new device and then manually install everything back on it. Stuff like mail, contacts, etc, would be reloaded from the cloud. So I did and I noticed that one of my 3rd party apps, MadPad, had none of my saved data. Does anyone know of a way to restore 3rd party app data from the iCloud? Is there some sort of utility out there that would do this?  I don't want to restore it from my previous iPad 2 backup because it will reintroduce the Safari problem back onto my new iPad.
    Thanks!

    Assuming that you even have a backup with the data in it, you have no choice but to use a backup in order to restore that data. That is the idea behind backing up to iCloud. If that is the only backup that you have - then that is the one that you have to use.
    But if the backup is bad - or had corrupt data - then you will end up with the corrupt data again. You cannot selectively restore app data from a backup. you restore all settings and data - or nothing at all.

  • How can you stop your ipod touch data from being restored on the computer with a program that lets you see your deleated safari history

    heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeelllllllllllllllllllllllllllllllllllllppppppp pppppppppppppp

    Delete the backup from iTunes. Go to iTunes>Preferences>Devices and highlight the backup and click on delete. You have to do that after every sync. Also, make sure that you empty the recycle bin (PC) or trash (Mac) to really delete the backup.
    Also, in the future you can turn on Private browsings in Settings>Safari or go there and Clear History right before you sync.

  • How can I upgrade my itunes to 11 version? It shows the legend "you have the latest version"

    Hi,
    I need urgent help!!
    I recently upgraded my iphone 4, it works perfectly, everything all right with it, but... Next time I wanted to sync the iphone with itunes I couldn´t!!!
    On the screen it shows a message saying that "my iphone cannot be read on this itunes because is not the actual version" and that I needed to upgrade it to the latest version, so I went to search for an update on the itunes menu and the message was "there are not new versions, you have the latest" but is not true!!!
    So, I went to the itunes webpage to download the 11.1 version and once it was finished I tried to install it, but it happened nothing!
    I am desperate and don´t know what to do, I don´t want to loose all I have there!!!
    I would be so grateful if you could help me solving this problem!!
    Thank you!
    Yazz

    If you're using 10.5.8, YOU HAVE the latest (iTunes 10) that will run on your OS.
    If your mac is Intel, you can upgrade to 10.6 through Apple for $19.99, then run the 10.6.8 combo update and you'll be able to run iTunes 11.1.2 or 11.1.3

  • How can I listen to mp3's and read a book at the same time?

    I read a language book, and follow the words by listening to the mp3's at that same time.
    How do I do this?

    Press play in the music app, switch to the book app and start reading. Audio automatically continues playing in the background.

  • HT4859 How can I verify that my App data is actually stored in iCloud. With Dropbox, I can actually see my stored files. With iCloud, itseems I'm supposed 2 just trust that Appl has the data. Short of doing a restore is there no way to check the data?

    How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
    With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?

    You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
    iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something.

  • How can I modify the text of the automatically created emails of WAS 6.40.

    Hi community,
    I have a question. How can I change the text of then email which ist automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
    How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
    Thank you.
    Best Regards,
    Olaf Reiss

    Not easily or readily available as of now. It WILL be part of the new features in the NetWeaver 04 release. (*This same question was asked in my EP6 certification class one week ago and this is the answer I got.)
    Found this guide in another post...it should help doing what you need manually...
    http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
    Hope this helps!
    CS

Maybe you are looking for