How come "INTEL APP ACCELERATOR" doesn't work with the 875p NEO?

i tried both versions, the raid and normal. says my hardware isnt compatible or cant be found or something like that. anyone got it running on there 875p? is there a patch or something, adifferent version im missing or something?

On the Intel site where(I hope) you downloaded the APP Accelerator, if you scroll down the page http://www.intel.com/support/chipsets/iaa/> you will come across a line that says "Supported Chipsets". Click on it and read it. It tells you everything you need to know. The Intel Chipset Software Installation Utility, or INF Chipset utility, is already optimized for these chipsets. Use that instead. That is what is used for the new chipsets. DO NOT GORGET to uninstall APP Accelerator, or you might have problems. Good Luck!

Similar Messages

How come u dont get a cleaning cloth with the iphone any more

how come u dont get a cleaning cloth with the iphone any more

Apple doesn't read these forums.
Submit your suggestion at http://www.apple.com/feedback

HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey

Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
Regards.

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!!

Can't activate the location service on my ipad2 after upgrading to ISO7! What's wrong? Doesn't worked with the resets!!!! Can someone help please?

Hello I found my answer on Settings>>Restritions! :)
Thanks to me:)

Which cable (original apple usb or bmw y) shall i use to connect my 4th gen iPod photo 60 gb to bmw f10 (with com box) is it going to work with the apple usb cable and how long does it take till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Which cable (original apple usb or bmw y) shall I use to connect my 4th gen iPod photo 60 gb (old but still working ok) to bmw f10 (with com box), build december 2010 > is it going to work with the apple usb cable and if so, how long does it take till I should be able to access the 33gb content via the bmw display?
Alternatively: How long does it take if I would have to use the bmw y cable till I can access the 33gb content via the bmw display?

Hardware acceleration doesn´t work with 6-core CPU?

Hi,
i´ve upgraded recently my PC to a Phenom X6 6-core CPU and i have encountered a major problem with the Flash player since then.
For example, Youtube HD videos don´t get scaled correctly when watched in fullscreen mode but instead the standard-view gets resized to my screen resolution without scaling
The result looks like this.
http://img217.imageshack.us/i/hd6850y.jpg/
I am pretty sure that even though i activated hardware-acceleration only software-acceleration is used to scale the videos. There seems to be a conflict between the 6-core CPU and the Flash player. I noticed that some software doesn´t work properly with the rather new 6-core CPU´s and it´s probably the same case with Flash player. I think it doesn´t recognize the CPU and switches automatically into software-scaling.
I already re-installed Flash Player several times and tried out several AMD Catalyst drivers for my graphic card. No results.
Any help is appreciated.
My system specs are:
Win XP Professional SP3, latest Flash Player version, latest AMD catalyst, AMD Phenom X6 CPU, AMD HD6850 GPU.
Message was edited by: FredFuchervonFach

Yes, i already updated my graphic card drivers several times.
There is no difference between running with or without hardware acceleration which supports my assumption that hardware acceleration doesn´t work, i guess.
The results are exactly the same
I´m running:
Win XP Professional SP3 32Bit
Firefox 3.6.16
Flash Player version 10,2,153,1
ÁMD Catalyst 11.3
Message was edited by: FredFuchervonFach

Waves plugins doesn't work with the new Logic X?

All of my Waves plugins included in the Complete V9 bundle doesn't appear with the "upgrade" to Logic X. Even I re-installing the plugins Logic X seems to ignore them...
Someone with this problem? Anyway to solve that?

AndersonPiah
For Waves v9 64bit version..
Did you also run the Waves AU Reg Utility 9.2 or later.. found in the applications/waves/waveshells folder?
If not, quit LPX and run the AU reg util.
Then, restart LPX and V9 should then be validated correctly and available in LPX via the Insert FX slots.
Waves V9 working fine here with LPX and 10.8.4
Salvarado,
As zbaig stated, you need to update to Waves v9 64bit... as v8 was 32bit only and is no longer supported within Logic Pro X

The sync doesn't work with the new version

Hi, I have a Macbook version 10.4.11 I just to work with the pocketmac for blackberry former version and It use to work great but since I did upgrade to the new version they system doesn't sync any contact, meeting....
The system recognize my Blackberry PIN and the status is "available" but nothing happens.
Any suggestion?
Thanks

I tried a whole slew of things and did manage to get it to sync by syncing each component one by one just to see if there was a problem area such as tasks or notes. That went fine but when I tried to do a full sync will all the components I need the sync would run and then then PocketMac would freeze and crash. Yesterday I decided I had spent more than enough time on this and bought MissingSync. So far it's great.

"app.documentPresets" doesn't work with JS in IDCS3?

I want to use this code "app.documentPresets.left" to get it's value,but it doesn't work in IDCS3,anyone can give me some advice?

Hi goldbridge,
That information is not stored on the document--or anywhere else. InDesign uses the following naming standard: "Presets" apply settings, but do not persist, "Styles" apply settings and persist.
You could have a script store this information in the document's label, though.
Thanks,
Ole

Intel Wireless Card doesn't work with Linksys?

My wired computer works great with the WRT54GX2, but my wireless cannot hold a signal for very long. Support says they can't help me because I have a Intel wireless card. Intel does not support for that card anymore and I can't see where to buy a Linksys card. Please, help.
Bonnie

check the link for the linksys retailers
Retailers
Message Edited by Maximus on 07-21-2006 05:48 PM
I do know everything, just not all at once. It's a virtual memory problem.

My S health app is doesn't work with my gear fit

I got a Gear Fit for Christmas. It works through the S Health app. My S Health app does not work on my phone. All it does is has a pop up "unfortunately stopped", therefore making my Gear Fit useless. I have tried the advice of many other users whose S Health app didn't work at all, much less with Gear Fit to fix. I've uninstalled, then reinstalled, powered off the phone, nothing works. I'm running a marathon and I cant use anything but a 3rd party to chart my history...very frustrated, please help!!

Give Samsung tech service a call on this one, I had a minor problem also and they worked with me over the phone to correct it.

How come almost all complete themes dont work with ver. 30.0 can a get a ver. that will work with them?

looking through the "complete themes" and almost all of them say " not available for firefox 30.0 " i guess that what ver. i have i thought i had the newer version and would think theese theme's would work with it is there somewhere else to look for more complete themes or another ver. i can download that will make it work with these theme's???
-dave email-" [email protected] "

As of Firefox 29.0 and newer the Complete Themes that were made for old UI in Firefox 28.0 and earlier really needs to be updated.
Some examples.
*https://addons.mozilla.org/en-US/firefox/addon/nasa-night-launch/
*https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-tiger-sp/
*https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-tiger/
*https://addons.mozilla.org/en-US/firefox/addon/metal-lion-australis-graphite/
*https://addons.mozilla.org/en-US/firefox/addon/ft-deepdark/
https://addons.mozilla.org/en-US/firefox/complete-themes/?sort=updated
and on the Theme page you can scroll down and click on Version Information.

How to configure Cisco ASA 5500 to work with the iPhone

We have Cisco ASA 5510 (latest firmware version), and apparently, according to Cisco website it is compatible with new iPhone 3G's IPSec client:
http://www.cisco.com/en/US/docs/security/vpnclient/cisco_vpnclient/iPhone/2.0/connectivity/guide/iphone.html
We've setup our first iPhone properly. It connects fine to the network, shows VPN connection as active. Gets a private IP address. But does not let any traffic go to the internal network. We thought it might be DNS problem, but it cannot connect to Exchange server even when using IP address instead of DNS. No luck either.
After checking ASA logs, we found that iPhone goes through Phase 1 authentication correctly. But then gives some kind of error, mentioning "Attribute 5".
Has anybody been successful configuring ASA5500 series (in particular 5510) to be used with iPhone?
I noticed that many people are having these problems.
Please do not post to this topic if you have ANY OTHER Cisco device.
Cisco specifies that iPhone is compatible only with Cisco ASA 5500 Security Appliances and PIX Firewalls. Neither Cisco IOS VPN routers nor the VPN 3000 Series Concentrators support the iPhone VPN capabilities.
Let's keep this topic only for users of ASA 5500 series and PIX Firewalls.
It would be extremely helpful for a large number of users if somebody posted a list of settings for ASA5500 or PIX firewall that DO work with iPhone 2.0
Thank you!
Oleg R

We found the solution and a bug in Cisco firmware (seems to be a bug).
First of all, thanks to our Chief Systems Architect Seb, here is a config that worked for us on a Cisco 5520 (latest firmware).
access-list iphone_splitTunnelAcl standard permit <insert ip> <insert mask>
access-list iphone_splitTunnelAcl standard permit <insert ip> <insert mask>
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set iphone esp-3des esp-sha-hmac
crypto ipsec transform-set iphone mode transport
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SYSTEMDEFAULT_CRYPTOMAP 65535 set pfs
crypto dynamic-map SYSTEMDEFAULT_CRYPTOMAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 iphone
crypto map outside_map 10 match address vpn
crypto map outside_map 10 set transform-set ESP-AES-256-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEMDEFAULT_CRYPTOMAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 20
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 86400
crypto isakmp nat-traversal 20
group-policy iphone internal
group-policy iphone attributes
wins-server value <insert ip> <insert ip>
dns-server value <insert ip> <insert ip>
vpn-tunnel-protocol IPSec
ipsec-udp enable
ipsec-udp-port 10000
split-tunnel-policy tunnelspecified
split-tunnel-network-list value iphone_splitTunnelAcl
default-domain value <insert domain name>
tunnel-group iphone type remote-access
tunnel-group iphone general-attributes
address-pool VPN-Pool
authentication-server-group ActiveDirectory2
default-group-policy iphone
tunnel-group iphone ipsec-attributes
pre-shared-key <insert pre-shared key>
For iPhone you have to be using IPSec tab for configuration.
We tried to set up this config using the wizards, but it would not work.
Later it turned out that wizards by default set this setting:
"crypto isakmp nat-traversal 20"
equal to zero and there is no way to change it from the GUI.
Only after we changed it (increased the value from 0 to 20) through the command line the connection started working perfectly.
Please let me know how it works out for you.
Message was edited by: Rogik
Message was edited by: Rogik

Fuzzy logic 4 doesn't work with the KT4-SR!

why ;( ?!

I also have problems running Fuzzy Logic.
I do not run any other utilities, and I have the latest version of it. When I run the program, it sits in the system tray, if I try to click on it, nothing happens. Taskmanager shows FL4 uses around 99% of the CPU. Aslo, when I shut down after running FL4, Win XP can take upto 10 mins to kill the app.
Does anyone have a fix, re-installing or upgrading FL4 doesn't work.
Alternativly, is there another program that can be used?
I have:
KT4 Ultra with AMD XP 2400+
Windows XP Pro / SP1
Thanks

How come "INTEL APP ACCELERATOR" doesn't work with the 875p NEO?

Similar Messages

Maybe you are looking for