How connect to microsoft access 97 with developer

i need to use microsoft access database in developer
but i couldn't use it.
i made an odbc driver and use 'scott/tiger@odbc:my_odbc_naem'
but i couldn't connect.
if you can, help me please.
thanks in advance.

That MS Access driver is 64-bit, I think. If SQL Developer, or JDK is 32-bit you need to use the 32-bit driver. You can see if you have a 32-bit driver installed using c:\windows\system32\odbcadm32.exe

Similar Messages

How to query microsoft access with DDE Request?

Hello,
We are trying to save the results of calibration tests to access database and include a search tool inside the labview to find specific results based on the part number of the tested device. So far we have accomplished writing data into the access database using the examples of labview. My question is that is there any way to send a query to microsoft access and recieve the results inside the labview? For example send a query with a specific criteria on the part number and recieve the results for that part number.
Thanks in advance
Pouya

Why would you be using DDE. That microsoft technology is obsolete and has not been used/supported in quite a few years. Instead, look at the Database Connectivity Toolkit or LabSQL. There are also numerous posts on ADO (the technology behind both). Do a search.

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

How to integrate microsoft outlook with WebAS

how to integrate microsoft outlook with WebAS

Nibu,
I guess users enumerated enough options in your original thread on different forum: Integration of Web AS and Microsoft OutLook and there is no need for cross-posting
VS

Apple tv 2 - root password has been changed to non default. I need to access apple tv 2. how do i get access with a forgotten password

apple tv 2 - root password has been changed to non default. I need to access apple tv 2. how do i get access with a forgotten password

Welcome to the Apple Community.
It depends on which password you are referring to, but generally speaking you can always restore the Apple TV.

Microsoft Access with Unicode

Hi,
I recently upgraded my website from CF5 to CF9 running on a virtual server. Below are the specs.
CF Version: 9,0,0,251028
Edition: Enterprise
Operating System: Windows Server 2008
My old code worked fine except that certain queries were running slow. My hosting provider suggested that I change the driver from "Microsoft Access" to "Microsoft Access with Unicode." As suggested, it did make things much faster. However, there were some pages on my site that didn't work. I did some research and found I had used two "reserved" words for table names that caused the pages to fail when using "Microsoft Access with Unicode" as the driver. Oddly enough, the pages worked fine with the regular "Microsoft Access" driver.
I am now down to just one error left that I cannot resolve. I get the following error ONLY when using the "Microsoft Access with Unicode" driver.
Error Executing Database Query.
Query Of Queries runtime error.
The select column reference [GetList.ItemNo] is not found in table [GetList].
This is the code it is referring to.

<CFQUERY NAME="GetProducts" DBTYPE="query">
SELECT
GetList.ItemNo AS ItemNo,
GetList.Item AS Item,
GetList.Grades AS Grades,
GetList.Price AS Price,
GetList.OrderQty AS Quantity,
(GetList.OrderQty * GetList.Price) AS ProductSubTotal
FROM GetList
</CFQUERY>
Is there an issue with "Microsoft Access with Unicode" not playing nicely with Query Of Queries?
I would greatly appreciate any help with this issue.
Thanks,
Steve

THANK YOU! THANK YOU! THANK YOU!
I never noticed that I had included the column "ItemNo" more than once (as you can see below). I removed the extra and it worked perfectly!
Thanks again!
Steve
<cfquery name="GetList"
DATASOURCE="#request.ds#"
USERNAME="#request.dsuser#"
PASSWORD="#request.dspass#">
SELECT
o.OrderID,
o.OrderDate,
o.ShipState,
o.ShipCountry,
o.TaxExempt,
o.PromotionalCode,
oi.ItemNo,
oi.OrderQty,
oi.Price,
p.ItemNo,
p.Item,
p.Grades
FROM Orders o,
OrdersItems oi,
Products p
WHERE o.OrderID = #ATTRIBUTES.OrderID#
AND oi.OrderID = o.OrderID
AND p.ItemNo = oi.ItemNo
</cfquery>

How to integrate Microsoft Calendar with Spaces

how to integrate Microsoft Calendar with Spaces

Najeeb, the steps mentioned in the guide are related to integration of Microsoft Exchange Calendar not Outlook Calendar. I was assuming that you are interested in integration of Outlook Calendar using desktop connector similar to connector for MS. word, MS.excel and MS.powerpoint.
How to integrate Group Space Events To Outlook Group Calendars [ID 1117746.1]

Connecting Microsoft Access with Primavera via VBA

I'm Primavera expert and Microsoft Access as well
I want to know where to start to learn how can I establish a connection or session with Primavera from Microsoft Access via VBA.
Thank you
Emad

Hello,
I'm not familiar with Primavera P6 and Access. May be you should post the question in the
Oracle Primavera forum.
The following thread is about similar issue, you can try to use primavera SDK provider or ODBC connection:
http://www.planningplanet.com/forums/planning-scheduling-programming-discussion/527878/primavera-p6-software-development-kit-sdk
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

UNABLE TO CONNECT ORACLE 8i NT WITH DEVELOPER 6.0

Could somebody possibly from Oracle outline the solution on how to connect Oracle 8i with Developer 6.0. Oracle may please update the Developer 6.0 to be able connect to Oracle 8i sucessfully.

I have Oracle 8.1.5 on my W/NT server and Developer 6.0 with patchA5 installed on my clients.
I'm able to connect from Developer 6.0 to Oracle 8.1.5 using the following entries in
my client's c:\orant\net80\admin\tnsnames.ora
file:
orcl.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = pc20)
(Port = 1521)
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = pc20)
(Port = 1526)
(CONNECT_DATA = (SID = ORCL)
ORCL is my Oracle 8.1.5 instance name (SID), not my global database name (which I called 'updsis' or whatever). (I DON'T mean the instance name MUST be ORCL!)
I didn't need to change my tnsnames.ora after upgrading from 8.0.5 to 8.1.5 on the server.
Hope this helps. Regards,
Andrew Florit
null

Problems controlling Microsoft Access with ActiveX

I have done quite a bit of searching on this topic, and have found several answers that are close, but do not address my actual problem.
I would like to use ActiveX to control Microsoft Access, specifically to create new database files without having to copy a blank file I have stored somewhere. I also can't stand it when I can't get something to work, so this is now a personal thing too.
Anyway, when I run a simple VI to open the creatable reference Access._Application, I get the error: "Error 3005 occurred at Automation Open: Object specified is not creatable in Access.vi". I have tried a lot of the common answers to this problem, like browsing for the library in the ActiveX window, and trying to register it with regsvr32, but the file is msacc.olb, which cannot be registered with regsvr32.exe. I have attached the original VI and I have tried this on 3 different PCs, all with slightly different installs of Office, but all with Access 2007. If anyone can help me figure this out, I would greatly appreciate it.
Thanks
Eric
"When I see an adult on a bicycle, I do not despair for the future of the human race."
-H.G. Wells
Solved!
Go to Solution.
Attachments:
Access.vi ‏6 KB

Your vi gave the same error on my machine. Then I deleted the Access._Application reference, right-clicked on the reference input and selected Create Control. Then I changed the Active-X Class by browsing to my computers version of the reference ("Access._Application.12"). The same vi ran without error.
The class still shows as Access._Application, which indicates that there may be an incompatibility which is not visible.
When and activeX node fails to run when copied from any other machine, it is recommended to Replace each node that generates the error and reselect the properties and methods.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Query builder by microsoft access with CF basics

does anyone if
query builder by microsoft access can work with with CF mx
how can i use it with cf and oracle queries?
also, is it free.
does anyone know how i can get it.
and install it with my db (oracle 9i)????
thanks

You can build your query in Access, switch to sql view and
copy and paste the code anywhere you want. However, ITWILL((((BE
very hard)))TO READ BECAUSE IT IS all one LINE and has [[[[[TOO
MANY]]]]]((BRACKETS))) and random CAPITALIZATION.
Also remember that the s in sql stands for structured, not
standard. Oracle and Access have different syntax in some cases and
they definetly have different functions.
A better approach would be to learn sql.

How to start microsof access with parameter through runtime.exec

Hi,
I try to start access with parameter like this:
String[] cmd = new String[4];
cmd[0] = "C:\\Programme\\Microsoft Office\\OFFICE11\\MSACCESS.EXE";
cmd[1]= "C:\\MyDB.mdb ";
cmd[2] = "/cmd";
cmd[3] = "parameter1 parameter2";
Runtime rt = Runtime.getRuntime();
Process proc = rt.exec(cmd);
However the access mdb startet but it seems not to take the parameter i want to put in to access.
Have anyone an Idea, what is wrong here?
Thanks

Hi
What do you expect Access to do?
The /cmd command line option sets the value that is returned by VBA Command function (see http://msdn2.microsoft.com/en-us/library/aa211469(office.11).aspx).
If you want to start a macro, you would need the /x switch (see http://office.microsoft.com/en-us/access/HA101666051033.aspx).
Hope this helps
Christoph

Maximum number of connections for MS Access with JDBC

Hi guys,
does anyone know about the maximum no. of connections that MS Access can have with JDBC...

MS Access has not limit. It doesn't work that way.
There is certainly going to be some resource limit however, if nothing else then memory will eventually run out.

How To automate Microsoft Access Forms

Hi,
I am trying to use ActiveX to automate Microsoft Access Forms. Does any one have any example code of doing this.
Thanks

Well, not exactly an example, but sort of an answer can be found here. It looks like getting the reference to a form is fairly simple, so going on from there should probably not be too hard.
Another option, if feasible, would be to use macros. There is an example in the example finder of this, but I'm guessing that's not what you want.
Hope this helps.
Try to take over the world!

How connect to microsoft access 97 with developer

Similar Messages

Maybe you are looking for