How could i make editable the Pricing Date?

Hi,
I need to make editable the field Pricing Date on item level of the sales order, tab Sales A on General Sales Data screen.
Any idea how? Is there a copy routine? or do I have to change the user exit?
Thanks,
Andrei

Hi,
It's a debit/credit note value adjustment order created with reference to a standard invoice. The problem is that it copies the pricing date of the first item of the invoice and insert it on header level on the sales order. So now we're forced to change the pricing date on the item level of the sales order, but the field is grey and cannot be modified.
Any solution to this?
Thanks,
Andrei

Similar Messages

TS3367 If I bought an iPhone on United Arab Emirate and using it In Afghanistan, How could I make available the Face Time in setting?

How could I make face time available in my iPhone 5 setting? I bought it on United Arab Emirate and use it in Afghanistan, with Etisalat GSM connection.

You can not do so. It is permanently removed from all iPhones sold in UAE and KSA. This is a requirement of the goverenments there. Apple has no choice in the matter.

How do you make sure the form data prints (commercial offset printing)?

We are commercial printers and have been using a PDF workflow for quite a while now. We recently received a PDF form to print but any information filled in the form just dropped out (all non-data printed fine). When we send it to a laser printer, everything is there but when it goes through the RIP and imposition software (both Heidelberg), all the data is missing.
When I open the PDF from the client, I am not able to change or even highlight the data. There is a message saying the information is locked.
We were able to get around the problem by importing the PDF into InDesign and making a new PDF from that but that seems to be an extra step that coulb be avoided.
Anyone else with a similar problem (and solution)?

How can you tell that it is an XFA form? If I can identify the form type from when I get jobs like this, I can use the workaround from the beginning.
Here are a few more screen shots of things that are happening:
When I try to Print to a PDF:
When I use the Mac "Save to Adobe PDF" in the print dialog:
I get this message often:
and when I try to embed the missing font (PitStop), I get this:
The only thing that has worked so far is placing the PDF in InDesign and Exporting to a new PDF from there. I guess this is making the flattened PDF that you talked about.

How can I deactivate the pricing date and material pricing group in VA01?

Hello All,
How can I deactivate (output only) the pricing date and material pricing group field in VA01/2, VA21/2, and VA41/2? What user exit can I use? Thanks in advance...
PeeJay

You can use the t.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry 'pricing date' or VBKD-PRSDT make the necessary changes and save.
The system will prompt to assign a package and request enter the necessary values.
Your issue is sorted!!
Regards,
PATHIK

HT5177 How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

Have the project, events and media on one drive which is common to both macs.
You can download FCP X to both macs using the same Apple ID that it was purchased with.
Andy

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

Pricing Conditions and how the pricing date is determined

Hi all,
Small question, i ahve some pricing conditions that use the Serives Rendered date and others that use the Pricing Date from an order, how is the condition decided on what date it uses?
Hope i have expplained this ok, if not and you need more info let me know.
Regards
Steve

Hi
There is a difference between Service Rendered Data and Pricing Date.
Normally Freight Conditions are maintained on Service Rendered Date so the freight will be picked on the basis of date on which the Actual Delivery done, whereas Pricing date is used for other conditions so that price will be based on the date on which the document created and the Pricing Date maintained in that.
In the same way there is a Billing Date which came in Invoice so price will be based on the date of Invoicing.
If you maintain the record in VK11 and test a cycle you will be able to find the difference easily.
Regards
Amitesh

How do I make Photoshop the default Edit App for .jpg in Windows 7?

How do I make Photoshop the default Edit App for .jpg in Windows 7?    I want to be able to right click on a .jpg file, select the EDIT option in the Context Menu, then have Photoshop edit the file instead of Paint.
In Windows XP it was very easy to use the File Manger to associate the file type .jpg and action edit with Photoshop.    No so easy in Windows 7. It is easy to change the default OPEN application, but I would like to leave Windows Viewer as the default OPEN application and have Photoshop as the EDIT applicaiton.

Before I posted the original question here, I had probably spent a couple of hours trying to research it.   I hate to find no answer for something I know can be done.   So I spent some more time and found the following in the bowels of a Tech Forum that is generally way over my head. I have modified it to be Photoshop specific.
These instructions will update the default EDIT action for image types - jpg,png,gif and the variations.     If you are unfamiliar with editing the program registry you probably will want to back up your registry or take a system backup.
1. Open up the registry editor (Regedit.exe).
You will need to be signed on as a Windows user that is an administrator
2. Find HKEY_CLASSES_ROOT -> SystemFileAssociations -> image -> shell -> edit -> command
This seems like it would be easy but it is not, because there are many key names that are very close (like System.FilesAssociations).   Keep looking because you will find it eventually.
3. Double click on "Default" (on right window pane) and update the program location.
You should see that MSPAINT.EXE is the current program.
Erase the existing value and enter you photoshop location in quotes followed by %1 in quotes. For me this is "C:\Program Files (x86)\Adobe\Adobe Photoshop CS4\Photoshop.exe" "%1"
Hit return.
4. Exit Regit and test.

I created a new folder on My Picture on my PC, but when I went into my device to sync the new folder i created i couldnt find it. How could I make it a choice of the selected folder so I can sync that onto my device?

I created a new folder on "My Pictures" on my PC to sync some new photos, but when I went into my device to sync the new folder I created I couldnt find the new folder under "selected folders" in the sync photo section. How could I make it a choice to find my new folder I created so i could find it under "selected folder" so I could be able to sync?

Hi there!
Could you clarify for me: are you still using Photoshop Elements on your new Mac or are you now using the Revel Mac Desktop app?
Thank you!
Glenyse

How many ways to edit the data in PSA?

HI
How many ways to edit the data in PSA? Can we edit both transaction, master data also?

Hi.......
Yes yo can edit data in PSA for both Master data and transaction data.......the only diffrence is that in transaction data you have to delete the request from the target before editing......and in master data no need to delete any request....directly edit the PSA........
To edit PSA......the most easiest method has alsredy mentioned ............
But suppose you don't have authorization to edit the data in PSA but still you want to edit then you can follow the process mentioned below..........
You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
RSAR_ODS_API_PUT
After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.
check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/4f/8d4b38187a8442e10000009b38f8cf/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
Hope this helps.......
Regards,
Debjani......

How to copy the Planned GI date as the pricing date in Invoice

Hi!!,
For this requirement we want the price the product based on the Planned GI date and not the actual GI date...For some case when Planned GI date was early and we shipped late.It means we would be creating the Invoice later than the Planned GI date and hence the billing date would be my pricing date in the Invoice which will be the later date....
We want that the pricing should be as on Planned GI date.....is there a standard way we can accomplish this using configuration?
Helpful answers would be handsomely rewarded.
Thanks

Hi, I had a similiar reqmt but in that case we wanted the Pricing date from the Sales Order to be copied into the Billing Document Pricing Date (for the correct pricing) instead of the Actual GI Date from the Delivery to flow to the same.
We achieved this using ABAP by making a copy of the Data Transfter routine found in Data VBRK/VBRP field in the copy control and adding the required codes to it. Hope this gives you some lead.

What this mean? "could not rasterize because the pixel data for this layer is not"

I've taken a color picture and made it black and white by doing the following: Layer>New Adjustment Layer>Hue/Saturation. I brought the saturation down to -100. The pencil is selected and my foreground color is black.
When I try to select the flowers in my picture to bring out their color (within the black and white image), I get a circle with a black line thru it and the error message "could not rasterize because the pixel data for this layer is not directly editable". The steps I followed are working for most of my team but some of us are getting this error message.
Any idea why and/or how to fix it?

Ah, thank you! I didn't have the mask selected. So once I did select it, the color came thru like magic.

How can I make a query by date with several TDMS files?

Hi,
I have a project that can write and read TDMS files everyday (a file for each day with date and time). There, I can import those files to excel (I choose a file and load it). But, I have a question: How can I make a query by date with those TDMS files? I'd like make a time stamp for start date and stop date, where I could compare the TDMS file dates and sum the values that are in the channels where these files are similar. For example, I save a file with "02/01/2013" name, in other day "03/01/2013", in other day "04/01/2013"... so, i'd like put in time stamp for start date "02/01/2013" file and to stop date "04/01/2013" file, than, sum all values that range with my TDMS files existing. How can I make that?
Thanks all,
Val

Hello Val_Auto.
You're Brazilian, no? Me too. = ^ - ^ =
I converted VI to version of your LabVIEW (8.5). Is attached in this reply.
This VI search all your TDMS in a range of dates and join them in a single TDMS. I hope this is what you wanted.
Query TDMS is the main VI. The TDMS VI Search changes the date format that out from calendar control (which is DD / MM / YYYY) to DD-MM-YYYY. This is because you can't name files using "/". I chose "-" but, if necessary, you should change to keep the same format of your TDMS files.
If you have any doubt as to its operation or how to make changes to adapt VI for your application, keep at your disposal.
Thank you for your contact; I hope have helped you and succeed in your application.
Wesley Rocha
Application Engineer
National Instruments Brazil
Visite a nossa comunidade em PORTUGUÊS!!!
Attachments:
Query TDMS.vi ‏62 KB
tdms search.vi ‏24 KB

Edit the release date of a podcast ?

Hello everyone !
I have a question regarding iTunes and podcasts management. I really enjoy a specific podcast, which I follow from a few monthes. A friend of mine has given me the whole archives of the show, from more than two years, as plain mp3 files. I successfully added them to iTunes, then specified them as podcasts so that they would appear in the right section of the library.
But there is a glitch : the old podcasts do not have a release date, on the contrary to the more recent ones that I have downloaded from the iTunes store. I would like to manually edit the release dates of the old files so that they fit with the new ones, but I can't seem to find the corresponding field in the informations window...
So if any of you have a solution, I would be very interested !
Thanks in advance !
Thomas
(I'm running iTunes 10.4.1 (10) and Mac OS X 10.7.1)

Hi, Thomas. It took me several hours of scouring the Internet and testing solutions on my computer, but I finally have answers for you:
This will be a comprehensive answer that includes solutions to some things you may not have asked about. It's so I can copy this answer into several other threads where similar questions are being asked.
Q: How do I add an mp3 podcast file to Mac iTunes 10.6.3 (the latest version as of July 13, 2012)?
1. Open iTunes, go to the FILE menu, select ADD TO LIBRARY, select your mp3 file in the dialog box, and click on Open.
2. The file will most likely have been added to your Music library and not your Podcast library. If this is the case, select the newly-added podcast in your Music library, go to the FILE menu, select GET INFO, click on the OPTIONS tab of the dialog box, change the MEDIA KIND dropdown menu to "Podcast," and click on OK. Your mp3 podcase should move to the Podcasts library.
Q: Now that I've added the mp3 podcast to my Podcasts library in iTunes, how do I change the release date so that it shows up in the proper order with all the other podcasts in that series?
1. Download the program ID3 Editor from http://www.pa-software.com/id3editor/
2. After you've downloaded, extracted, and moved the application to your Applications folder, open ID3 Editor.
3. Go to the FILE menu in ID3 Editor and choose OPEN and select your mp3 file from the iTunes Music folder (not the original mp3 which may be in a different location on your computer). If you don't know where it is, go to iTunes, right-click (or <Control>-click) on the podcast, and select SHOW IN FINDER to see its exact location. The usual path is USER NAME > MUSIC > iTUNES MUSIC > PODCASTS > folder with name of podcast.
4. Your podcast will open in ID3 Editor with the Standard tab active. Click on the EXTENDED tab to see the RELEASED tag field.
5. In the RELEASED tag field, add or change the podcast release date to whatever you want it to be. The format is 2012-07-13 16:30:00 (YYYY-MM-DD HH:MM:SS).
6. Click on UPDATE in the lower left and the file will close with your changes saved.
7. Select the newly-updated podcast in your Music library, go to the FILE menu, select GET INFO, and click on OK to update the information in iTunes. The podcast should now move to the proper place in order when sorted by Release Date.
Q: My podcasts are in different folders instead of all being in the same folder. How do I group them back together?
1. To make all your podcasts show up in the same folder, the IDENTIFIER and FEED tags need to match for all podcasts.
2. Open ID3 Editor and open all of the podcasts you want to group in iTunes under one folder. (Remember to open the files from within the iTunes Music > Podcasts folder and not from your desktop or Documents folder where you may have stored originals downloaded from the podcast's website.)
3. For each mp3 file opened in ID3 Editor, switch from the Standard tab to the PODCASTS tab.
4. If you have a podcast that shows up properly in iTunes and should be the default name/location for all the other disparate podcasts in the series, bring that file's window forward and copy the URL from its IDENTIFIER field.
5. For every other mp3 file for that podcast that you have open in ID3 Editor, PASTE that URL in to the respective IDENTIFIER field for each one.
6. From the same file you copied the Identifier URL, now copy the FEED URL.
7. For every other mp3 file for that podcast that you have open in ID3 Editor, PASTE that URL in to the respective FEED field for each one.
8. For every podcast file, make sure ENABLE PODCAST TAG is checked (in the upper left of the Podcast tab).
9. Now you have to number all the files properly. To do that, you need to be in the STANDARD tab in ID3 Editor.
10. Count up the total number of podcasts in the series you're consolidating. That TOTAL# number will go in the second TRACK field in the upper left (i.e., Track # of TOTAL#)
11. In the first TRACK field in the upper left, number your files in the order you want them to be listed (i.e., TRACK# of Total#). Also put the TRACK# in the TRACK field in the upper right (next to "Enable V1 tag").
12. Click on UPDATE in the lower left of each file to close each one with your changes saved.
13. For each of the newly-updated podcast files in your Music library, select it so that it's highlighted, go to the FILE menu, select GET INFO, and click on OK to update the information in iTunes. Once you've done this for every file, all podcasts in the series should be under one folder. (If not, make sure the ALBUM field matches exactly for each file.)
I hope the above resolves all the difficulties you've experienced with Podcasts in iTunes. If not, let me know and I'll add more detail (or correct any inadvertent errors in my instructions).

How could I make a connection to XE using Jdeveloper and JSF?

Hello, I want to develop an application that must interact with a Oracle Database Express Edition. How could I make a connection to it and display, for example, a table from the database in a JSP using JSF in Jdeveloper.

Hi ,
I have installed Jdeveloper 10.1.3.1.0 and Oracle database Express edition 10g on the same machine.I want to connect to the database from Jdeveloper but i get the message "The Network Adapter could not establish the connection" , when i test the connection. The listener is running and am able to connect to database using SQL Plus.
I have tried various methods like giving the ipaddress and giving the URL, looking at the JDBC configuration wizard given in the documentation , but of no use .. can anyone please suggest me how to connect??

How could i make editable the Pricing Date?

Similar Messages

Maybe you are looking for