How Delta record is created from ODS to Cube.

Hai Gurus,
      I am new to BW and I have question about the delta mechanisam. Please advise...
      Suppose an order of qty 50 created in R3, the Ods is loaded with 50 and the cube is loaded with 50 already. If the order changed qty changed from 50 to 40 and I bring this 40 to ods with full update. the change log is created after the activation of ODS and the -10 from the change log is updated to cube?!. Is this correct. Please correct me if I am wrong.
Cheers!!
Vijay.

you set the Delta Methos using the setting in delta maintainance screen of the Generic Extractors.
1. additve delta
2. changed records with new status
i'm not sure whether above description correct or wrong. there is a radio button for Generic Extractors to select  the option.
all the best.
Regards,
Nagesh Ganisetti.

Similar Messages

  • Delta records not updating from DSO to CUBE in BI 7

    Hi Experts,
    Delta records not updating from DSO to CUBE
    in DSO keyfigure value showing '0' but in CUBE same record showing '-I '
    I cheked in Change log table in DSO its have 5 records
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -  -1
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   0
    ODSR_4LIF02ZV32F1M85DXHUCSH0DL -   1
    ODSR_4LH8CXKUJPW2JDS0LC775N4MH -   0
    but active data table have one record - 0
    how to corrcct the delta load??
    Regards,
    Jai

    Hi,
    I think initially the value was 0 (ODSR_4LH8CXKUJPW2JDS0LC775N4MH - 0, new image in changelog) and this got loaded to the cube.
    Then the value got changed to 1 (ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 0, before image & ODSR_4LIF02ZV32F1M85DXHUCSH0DL - 1, after image). Now this record updates the cube with value 1. The cube has 2 records, one with 0 value and the other with 1.
    The value got changed again to 0 (ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - (-1), before image &
    ODSR_4LKIX7QHZX0VQB9IDR9MVQ65M - 0, after image). Now these records get aggregated and update the cube with (-1).
    The cube has 3 records, with 0, 1 and -1 values....the effective total is 0 which is correct.
    Is this not what you see in the cube? were the earlier req deleted from the cube?

  • How to delete init request when load is taking place from ods to Cube

    Dear All,
    I have initiated the init load from ODS to Cube, but the init request was not successfull... Now on clicking the init infopkg i get the short dump error....
    I am trying to acess this infopkg so that i can delete the old init and reschedule it again...
    Now in order to avoid this error i need to delete the init request somehow..... Since data load is happening in BW system only there is no way to go to delta queue and delete the init...
    How can i delete the init request in this case or how do i avoid this dumup error???
    Thanks & Regards,
    Anup

    From se11, go to the table, see the content... from this window mark the check box for relevant entries in the first column and click on Display button (F7)
    enter "/h" in the command prompt and press enter
    Click the top most green button to execute.
    From the debugging screen, double click on variable "CODE" change the value to "DELE" (from "SHOW") and save (by pressing enter in bi7 and by clicking pencil icon in bw 3.x ).
    Press F8
    In the result screen you will find the delete entry in the application bar
    Delete one by one after ensuring the record content.
    Better you can ask any abaper to delete the table entries in the debug mode coz its a production server..else you can call me 9500066350(I prefer you to go along with abaper if you have no option dont wait for calling).

  • How to ensure data from ods to cube are correct or not

    hi all,
    i am just trying to get data from ods to cube. how to make ensure that the records that i fetched from ods to the respective cube are correct and number of records are the same.
    thanxs in advance
    regds
    hari

    Dear Hari,
    There are two ways of confirming correct loads:
    1. Level by Level Analysis
    2. Comparision with Virtual InfoProvider
    First method is by analysing data at each level. First at Database Table (if loading from R/3) or Excel (if loading from flatfile), then at extraction level (See data at RSA 3, not possible with flatfile). After this load data to BW through PSA and check the content of PSA. After that load it to Infoprovider and varify there.
    Second method is to create a Virtual Infocube on the datasource (extract exact data through FM). And create a multiprovider by combining this Virtual cube and original Cube. Then create a Query with calculated key figures as difference of each key figures from two cubes. This way you can say that which value is not matching.
    I suggest you the first method, but the standard way would be second one at highly critical loads where you cannot match huge ammount of data.
    Hope it helps...
    Regards,

  • Delta Load failure from ODS to Cube

    Experts,
    After CRM upgrade, I had to reinitilized the delta process. In this, I reloaded ODS with first init delta without data and then delta load with new data created in CRM. This worked good so far. After this when I tried to load cube with init. delta without data, no issues. But delta load from ODS to Cube doesn't work. Does anybody have any suggestions, please?
    Thanks,
    Nimesh
    Following error observed in Status for delta load from ODS to Cube.
    Error when transferring data; communication error when analyzing
    Diagnosis
    Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
    therefore probable that an error arose in the data transfer.
    With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
    It is possible that no connection exists to the source system.
    Procedure
    Check the TRFC overview in the source system.
    Check the connection of the source system for errors and check the
    authorizations and profiles of the remote user in both the BW and
    source systems.
    Check th ALE outbox of the source system for IDocs that have not been

    Hi,
    As far as i understood, you have successful deltas' loading to the ODS and you want to update entire ODS data to the Cube followed by daily delta's.
    If this is the case,
    Make sure that you have active update rules exist between ODS and Cube.
    First goto your ODS and right click and select option 'Update ODS data in data target'.
    Select Init update > IT will take you to the init info package where you select init <b>with data transfer</b> (Init with data transfer will bring all the records from ODS to Cube)
    Once init is completed ,you can schedule to load delta's regularly form ODS to Cube by following the same steps.
    Hope this helps
    Praveen
    Message was edited by:
            Praveen Vujjini

  • Doubt on Deltas from ODS to CUBE

    Hello Experts.
    I have few Questions on Deltas.  from ODS to CUBE
    I have 3 Cubes ( X, Y, Z )  which gets Deltas from ODS ( A ) .  i have extended the cube X so i have deleted data and Reloaded it.  I have to do Deltas from ODS to Cubes from now on.
    in the ODS manage ( there is Tick all connected data Targets to this Request is been Delted now ). 
    if i reinitalize the delta with out Data Transfer.  will only the data which come now on to ODS(  A ) will be going to cubes( X,Y,Z ) are all the data in ODS will go to Cubes.
    Please Advice me.
    Thanks
    Sharp

    Hi,
    When you are loading the delta from the ODS, the data is taken from the changelog. These records are the + and - records generated as a result of the new data loaded and activated in the ODS. So, if there were any changes made to the existing records these will flow to the cubes as well.
    If you do the init without data transfer, you need to couple that with the full load to create the initial status of data in the cubes.
    Hope this helps...

  • Restore failed delta from ODS to cube

    Hi All,
    I have started a delta load from ODS to cube but it has failed abruptly, for some reason, with out extracting even a single record.
    I want to restart/re-schedule the load but I am confused how to do that(just a delta or repair/repeat delta).
    Can someone please suggest how to proceed.
    Rgds,
    RPK.

    Hi Ravi,
    I had to stop the request because of some other issues and now I have to start it again. There is no particular error.
    Hi PB,
    Thanks a lot for the reply. Are you sure that I have to delete this failed request first? Will it prompt for a repeat delta when I try to schedule it again?
    Sorry for asking these questions but just want to make sure about it.
    Rgds,
    RPK.

  • How are deliveries automatically created from scheduling agreement?

    How are deliveries automatically created from the schedule line of the scheduling agreement? Can anybody explain this step by step? Can we use the code VL10BATCH for this purpose? If we can, how is this code used?
    Thanks in advance.

    hi
    A customer scheduling agreement is an outline agreement with the customer containing delivery quantities and dates. These are then entered as schedule lines in a delivery schedule. You can either create schedule lines when you create the scheduling agreement or you can create them later.
    You fulfill a scheduling agreement by creating the deliveries in the schedule as they become due. You process deliveries for a scheduling agreement in exactly the same way as you process a normal delivery. After you have carried out the delivery, the system updates the Delivered quantity field in the scheduling agreement item with the delivery quantity.
    The scheduling agreement is used as a basis for delivering a material. The customer sends in scheduling agreement releases, referred to as delivery schedules, at regular intervals to release a quantity of the material.
    Document Types
    To configure document types for scheduling agreements, choose Sales -> Sales Documents -> Sales Document Header -> Define sales document types in Customizing for Sales and Distribution.
    The R/3 System contains the following document types for component suppliers:
    LZ - Scheduling agreement with delivery schedules (no external agents)
    LZM - Scheduling agreement with delivery orders
    LK - Scheduling agreement with delivery schedules (external agents)
    ED - Delivery by external agent (consignment issue)
    EDKO - External agent correction
    RZ - Scheduling agreement returns (no external agents)
    KAZU - Consignment pick-up for external agents
    KRZU - Consignment returns for external agents
    Item Categories
    To configure item categories for scheduling agreements, choose Sales -> Sales Documents -> Sales Document Item -> Define item categories in Customizing for Sales and Distribution.
    The system determines the following item categories for the related document types in
    documents containing materials with item category group NORM:
    Item category LZN for scheduling agreement type LZ
    Item category LZMA for scheduling agreement type LZM
    Item category LKN for scheduling agreement type LK
    Item category KEN for document type ED
    Item category EDK for positive corrections (or the manual alternative EDK1 for
    negative corrections) for document type EDKO
    Item category REN for document type RZ
    Item category KAN for document type KAZU
    Item category KRN for document type KRZU
    Schedule Line Categories
    To configure schedule line categories for scheduling agreements, choose Sales -> Sales Documents -> Schedule lines -> Define or Assign schedule line categories in Customizing for Sales and Distribution.
    The R/3 System contains the following schedule line categories for component suppliers:
    L1, BN, L2, and CN for item category LZN
    E4, E0, E5, and BN for item category LKN
    L2 for item category LZMA (standard for delivery order processing)
    Schedule Line Types
    To configure schedule line types for scheduling agreements, choose Sales -> Sales Documents -> Scheduling Agreements with Delivery Schedules -> Define schedule line types in Customizing for Sales and Distribution.
    Creating Scheduling Agreements
    To create a scheduling agreement with delivery schedules:
    1. In the Sales menu http://Ext. choose Scheduling agreement ->Create.
    2. Enter scheduling agreement type LK (standard) or LZ (external agents) and the
    relevantorganizational data.
    3. Choose ENTER.
    4. Enter the following data:
    Sold-to or ship-to party number
    Purchase order or closing number
    Material or customer material number
    You can use the Description field to identify the scheduling agreement. For
    example,
    you could enter the model year for a particular production series.
    The system allows up to 35 digits for a customer material number.
    Rounding quantity
    Usage
    Choose Goto -> Header -> Sales to enter the usage at header level, or Goto ->
    Item-> Sales A to enter it at item level. The system proposes usage S, for series, as default in both cases.
    Planning indicator
    Choose Goto -> Header ->Sales.
    Target quantity
    Mark an item and choose Goto -> Item -> Sales A
    Partners
    For scheduling agreements with external agents , choose Goto -> Header
    ->Partners to enter the external agent as forwarding agent and special stock partner
    on the partner function screen.
    5. Create a delivery schedule
    Mark an item in the scheduling agreement and choose Goto -> Item -> <Delivery
    schedule>. Enter:
    A delivery schedule number and date
    The cumulative quantity received by the customer
    The last delivery confirmed by the customer
    A schedule line with date, time, and quantity
    To enter additional data in the delivery schedule, choose DlvSch.Hdr (delivery schedule header).
    configuration:
    img->SD->Sales->sales document->scheduling agreements with delivery schedules->
    step1: define schedule line types
    schedule line types are not schedule line categories. Schedule line types are used for information purpose only.
    stds are 1. fixed date 2. backlog 3. immediate requirement
    4. estimate
    step2: maintain planning delivery sched. instruct/splitting rules
    The planning delivery schedule is an internal delivery schedule used to plan requirement s more efficiently.  It is sub divided into 3 parts
    2.1 delivery schedule splitting rules
    2.2 dly schedule instrusctions
    2.3 assign dly schedule splitting rules
    step3: define sales documents type
    step4 : define item categories
    step5: define schedule line categories
    step6: maintain copy control
    PROCESS
    step1:  create scheduling agreement
    VA31
    enter SP,SH valid from, valid to,
    goto ITEM OVERVIEW tab
    enter material, rouding qty
    select ITEM  click on FORECAST DLSCH
    enter different dly dates and qties
    save it.
    step2: create sales order with reference to above
    step3: create delivery
    step4: create billing
    regards
    krishna

  • Can I do Parallel Full loads from ODS to Cube.

    Hai,
       Usually I will do one a full update load from OD'S to Cube. to speed up the process can I do parallel Full update loads from ods to Cube?
    Please advise.
    Thanks, Vijay,

    Assuming that the only connection we are talking about is between a single ODS and a single Cube.
    I think the only time you could speed anything up is in full drop an reload scenario. You could create multiple InfoPackages based on selection and execute them simultaneously.
    If the update is a delta there is really no way to do it.
    How many records are we talking about? Is there logic in the update rule?

  • Data loading from ODS to CUBE

    Hi All,
    I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
    now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
    Regards,
    Komik Shah

    Hi,
    Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
    1) get delta only once
    2) get data by request.
    If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
    Generally both should be unchecked but can vary as per requirements.
    Now for your new DTP, i dont think it will aloow you to change to FULL.
    If its allowing you to select FULL, then select it and select from acive table.
    try to load and see.
    regds,
    Shashank

  • Automatic loading from ODS to Cube in 3.5

    Hi All
    I was under the impression that in version 3.5 in order to load delta from ODS to Cube you had to run the 8 series Ipak.
    However I have recently noticed that this ipak is running automatically after a delta load into the ODS even when the load is not via a process chain.
    Can somebody where and how this setting is maintained.
    Regards
    A

    Hi,
    Go to ODS display mode and check if "Update Data Automatically" is ticked in Settings.
    Regards,
    Kams

  • Error when loading from ODS to Cube

    Hello Friends,
    I am having trouble loading data from ODS to Infocube in my 2004S system.When loading data i get this message
    07/03/2007     13:10:25     Data target 'ODSXYZ ' removed from list of loadable targets; not loadable.
    07/03/2007     13:28:42     Data target 'ODSXYZ ' is not active or is incorrect; no loading allowed     
    I checked for ODSXYZ in my data target but there is nothing by that name.Even the infopackage doesnt have it.What needs to be done.Please help.
    Thanks.

    Its a expected behavior. When you migrate ur DS, the infopacks associated with it, will grey out all the data targets that they were feeding before, that applies to any infopack you create even after the migration. You womt be able to delete it.
    Having said this, this shouldnt impact ur loads from ODS to Cube. As this shoudl be taken care of by ur DTP's rather than ur infopacks.
    A few questions:
    How are you loading ur cube?
    Did the data get thru fine to PSA with the infopack in question?
    How did you load ur DSO(assuming the load was successful)?
    Message was edited by:
            voodi

  • Updating the last date request from ODS to CUBE

    Dear Friends,
    Please can someone explain me.
    i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
    but i see in the ODS that all the data mart (tick) is available for all the request.
    And  please can someone explain me, if i have many request in the ods, current date previous day and so on.
    Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
    when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
    Thanks for your help.
    will assign complete points.
    Thank you so so much

    Hi,
    if you know everday how many request are getting updated in infocube as one request the you can check  the added records in infocube .. it should be equal to the sum of all those request ..
    but transferred can be more or equal .. also its depends on the
    update rules ..designing ..
    Hope this helps you ..
    Regards,
    shikha

  • Loading from ODS to Cube in process chain

    Hi Experts,
    How can I do a full load from ODS to cube when using further processing in process chain? Your help is much appreciated.
    Thanks,
    Bill

    Hi,
    You can use a DTP for this.
    Create transformation between DSO and cube.
    Create DTP and run it.
    Loading data from one cube to another cube.
    Cube to cube data loading
    how to upload data from cube to cube
    Can we pull data from one cube to another cube
    Data Load Steps:
    Reading data from another cube
    Hope this helps.
    Thanks,
    JituK

  • Date load error From ODS to Cube?

    Guru's,
    Here is a status of data load and suggest me.
    Actually we are loading data from ODS to Cube which is full load.This loading is done thorugh process chain and it is loaded for every half an hour.Every time the earlier load will be deleted and next load will be taken to cube.Two days ago the load had gone wrong.When I tried to see cause for the failure in Monitor details I could see Update missing and processing missing.When I see in process chains log view I got info stating some invalid characterstic had appeared.But when I search in PSA the whole of the data packets are green.If there is any invalid characterstics PSA should show a red status.But it is not showing.Please guide me how could I solve this?
    point will be definitely awarded for the proper answers.
    Thanks in advance.
    vasu.

    Hi Vasuvasu
    Once the edit is done and reloade the sata it wont show u the records in Red..
    Hope itz Helps..!
    Regards
    KISHORE M REDDY
    **Winners Don't Do Different things,They Do things Differently...!**
    > I dont whink this is with Disk space Y because after
    > every full load we are deleting data.

Maybe you are looking for