How do I add moving averages to my time series graph is there a function on numbers on tr iMac?

I've created a time series graph on numbers on my iMac but I need to add moving averages. Is there a function an if so where is it and if not is there a way to get around it

Badunit,
Here is an example plot, data sorted from most recent data at top of the table...
You can see the moving average (of 20) is plotted from right to left.
The Moving Average calculation is now wrong, and should have been calculated and presented from oldest to most recent.
Here is the same data, with table sorted from oldest data at the top of the table.
The moving average is also plotted from right to left, and shows the correct Moving Average for the most recent data.
That is, it is calculated from oldest to most recent, with the last Moving Average data point plotted on "todays" date.
What I want to see is my table displayed from most recent at the top (the top table), and moving average calculated and displayed as per the bottom graph.
Edit: So, think about this some more,
I need an option to tell Numbers to do the Moving Average calculation from the bottom of the table up, not from the top of the table down.

Similar Messages

How to find the moving average for perticular time step for same time series

Hello everyone,
I am new in labview and I have one issue. I have a huge text file with the different pressure value of different ports.
I make the VI in which first I read the text file and identify the perticular port column. In that column there are 32768 pressure value.
Time Num Port 101 Port 102 Port 103...... Port 532
0 1
0.001 2
50 32768
And this all reading takes in 50 sec and I have to split this readings in 4.5 sec... in every 4.5 sec there are 2969 values...
Now please go throw the attched VI... i am able to find the mean value with the 12 time step of 2969 value...
Now I want to do is, to find again the mean value of 2969 values(2970 to 5938) with time step of 12 and so on until 32768... so it happens 11 times in series...
So can anyone modify my VI??
Thank you,
Solved!
Go to Solution.
Attachments:
Moving average.vi ‏18 KB

please go through the attched VI
I made some correction in that.Now I am able to find the mean value for first 2969 rows with the overlapping time step of 12.
It means I am able to find the mean value from 1-12,2-13,3-14 ... 2958-2969...
but now the problem starts, I want to calculate the mean value of next 2969 rows which is 2970 to 5938 with the time step of 12...
So please modify my VI.. I stuck with the serious problem...
I have 32768 rows and have a partition of 2969 rows so the loop has to be repeat for 11 times.
hope you understand the prob
Thank you
Attachments:
Moving average.vi ‏19 KB

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

How do i add a reminders list (to do list?) like there us d to be on the right hand side of iCal?

How do i add a reminders list (to do list?) like there used to be on the right hand side of iCal?

Sorry - I linked the article for iOS Reminders. You are posting in the Mountain Lion forum, but you have listed the OS X for Snow Leopard. What OS X are you running?
Here is the support article for all devices and computers using Reminders:
iCloud: Calendar Events, Reminders, To Dos, and Tasks behavior differs by application - Apple Support
GB

How do I add the capture date and time to the bottom corner of a photo?

How do I add the capture date and time to the bottom corner of a photo?

Not to the bottom, that I'm aware of, but to the top right or left in Grid view or to the top left in Loupe view. It is in the View Options.

SSRS 2008 R2 - Add moving average to column group

I have a column group of dollar amounts. The row is a year/month. I would like to add a moving average column to the right of the last 6 months. My SQL Server data source is already complex enough and I'd really prefer not to add a column
there. Is there anything I can do within the report itself? Some way to reference the previous records in a matrix?
Thank you!

Hi mateoc15,
According to your description, you have a matrix in your report. Now you want to calculate the average value of last 6 month. Right?
In Reporting Service, we can put custom code into report to deal with complicated logic. Add one more column/row inside of group and call the functions defined in custom code. For your requirement we modified Robert’s code to achieve your goal. We tested
your case in our local environment with sample data. Here are steps and screenshots for your reference:
Put the custom code into report:
Private queueLength As Integer = 6
Private queueSum As Double = 0
Private queueFull As Boolean = False
Private idChange As String=""
Dim queue As New System.Collections.Generic.Queue(Of Integer)
Public Function CumulativeQueue(ByVal currentValue As Integer,id As String) As Object
Dim removedValue As Double = 0
If idChange <> id then
        ClearQueue()
                idChange = id
                queueSum = 0
                queueFull = False
                CumulativeQueue(currentValue,id)
Else
                If queue.Count >= queueLength Then
                                removedValue = queue.Dequeue()
                End If
                queueSum += currentValue
                queueSum -= removedValue
                queue.Enqueue(currentValue)
                If queue.Count < queueLength Then
                Return Nothing
                ElseIf queue.Count = queueLength And queueFull = False Then
                queueFull = True
                Return queueSum / queueLength
                Else
                Return (queueSum) / queueLength
                End If
End If
End Function
public function ClearQueue()
Dim i as Integer
Dim n as Integer = Queue.Count-1
for i=n To 0 Step-1
                queue.Dequeue()
next i
End function
Add one more row inside of group, call the function defined in custom code.
Save and preview. It looks like below:
Reference:
Moving or rolling average, how to?
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

[Forum FAQ] How do I add an average line to series group on SQL Server Reporting Services column chart?

Introduction
In SQL Server Reporting Service (SSRS), you may need an average value on column chart.
For the above chart, add an average score line to the chart, you can get which student’s score is larger than average score, and which student’s score is less than average score clearly. This document demonstrates how to add an average line to series groups
on SSRS column chart.
Solution
To achieve this requirement, you can add another values to the chart, change the chart type to line chart. Set the value to average value of the series group and set the line to show only once by using expression. Please refer to the link below to see the
detail steps.
Click the chart to display the Chart Data pane.
Add Score field to the Values area.
Right-click the new inserted Score1 and select Change Chart Type. And then change chart type to line chart in the Select Chart Type window.
Change the Category Group name to Subject. Here are the screenshot for you reference.
Right-click the new inserted Score1 and select Series Properties.
Click the expression button on the right of Value field textbox, type the expression below:
=Avg(Fields!Score.Value,"Subject"))
Click Visibility in the left pane, select “Show or hide based on an expression”, and type in the expression below:
=IIF(Fields!Name.Value="Rancy",FALSE,TRUE)
Name in the expression is one of the Students. Then only one line chart is be displayed by using this expression.
Click Legend in the left pane, type Average_Score to the Custom legend text box.
The report looks like below:
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

How do I add a trusted connection one time in firefox?

I have a user who is trying to access my department's external site. The pages that she is trying to access pulls data from a different domain (One in our DMZ) than the external host domain. This DMZ domain is a trusted domain and pulling data from this domain has worked well for years on multiple browsers without incident. Now for every other page that hits this internal DMZ server the user is getting "This connection is not trusted" and has to go through the manual exception dance to see her data. We host hundreds of pages and having to do this for each one is going to drive people to grab another browser quickly. I got this user working on Chrome without a problem and have tested it in IE without problem.
I have recreated the cert8.db file in her profile and run into the same problem after reboot.
How do I add a trusted connection for this domain one time?

This should add the permanent exception:
[https://support.mozilla.org/en-US/kb/connection-untrusted-error-message#w_bypassing-the-warning Connection Untrusted Error Message: Bypassing the Warning]
However if it is not staying until the next time that the user opens up Firefox, is it possible that they are in permanent private browsing? [[Private Browsing - Browse the web without saving information about the sites you visit]] - that should have instructions to get in and out of it.

UCCE 7.5 how to get BHCA and Average Call Handle time?

Hi everybody,
I'm trying to do an audit of the existing UCCE system.
Can someone please tell me how to get the BHCA and Average Call Handle time for agent?
I did a SQL query against the CallTypeHalfHour table for all the entering Call Type but I'm not sure that's the right BHCA.
Thanks in advance,
Best Regards,

Hi again Geoff,
Before closing this thread, I'm curious about your query against TCD for average handle time.
Here's mine using Skill_Group_Half_Hour
SELECT
    SUM(HandledCallsTalkTimeToHalf) AS TalkTime,
    SUM(IncomingCallsOnHoldTimeToHalf) AS HoldTime,
    SUM(CallsHandledToHalf) AS HandledCalls,
      AHT =
            CASE
            WHEN SUM(CallsHandledToHalf) > 0 THEN (SUM(HandledCallsTalkTimeToHalf) +SUM(IncomingCallsOnHoldTimeToHalf)) / SUM(CallsHandledToHalf)
            ELSE 0
            END
FROM t_Skill_Group_Half_Hour
WHERE DateTime between '02/01/11 00:00' and '02/28/11 23:30'
Besides, can you please also tell me how to get the Average Waiting Time (time before get answered by an agent) ?
Thank you in advance, Geoff,
Best Regards,

How to modify a default report in ByDesign / Time series?

Hello everybody,
I am currently working with the HR Dashboard - Employee Time (HCMTLMU01_Q0010) and I am facing a problem with the time series <Year to date>. Actually, this is a problem for all reports with Time Series.
I would like to know if it is possible to delete the Time Series from a default report? Because I cannot find how to do it.
I could also do what I want in another way, by modifying the format of the Time Series. Is it possible or not?
Like changing it from an interval to a fixed date, but keeping the behavior of the criteria from start of the year to current date. But I cannot find how to it neither.
Are these actions possible or I have to go back to the original data sources used by this reports and create my own?
Even if I doubt creating the same report "just" without the time series is not as easy as it sounds.
Thank you all,
Best regards,
Jacques-Antoine

thanks. it seemed like it worked. once. but when i tried to modify the default trans
ition time, it would not accept the new value.
also can you explain what is the difference between the unit that are used.
the entry screen asks for frames, but if you look at the duration in the effects
edit window the units appear to be min.sec.micros.
thanks,
rob

TB Average and Dynamic Time series

Hi,
In our outline, we have Time dimension tagged ad Dynamic Time series.
There few measures which have member formula attached, they are dynamic calc, two pass.
Among these measures which are tagged as TB average and skip missing, we get zero for QTD,YTD on retrieval.
But for other measures which do not have TB average and skip missing, we get values for QTD and YTD.
Please help !!

Just an update on the above query,
I was able to see numbers when I used the attribute dimension.
For eg.-
we have 5 standard dimension and 2 attribute dimensions which are attached to LOB standard dimension.
In excel addin when i retrieve withour taking the attribute dimension, i dont see numbers and when i put the attribute dimension as header, i see numbers.
Why this attribute dimension is making diffrence

Add varchar column in to Time Series Algorithm

i created a time series algoritham using numeric columns, but i need to add text columns so what we do?
plz share to me if possible to add.

Hi,
Thanks a lot, it's really help...don't know why I didn't see this customized point before in SPRO.
But I have an other issue, my new fields is added in the CATS screen and now I'm trying to put default value by using the user exit of extension CATS0009.
When I complete the value of my new fields in structure CATSD_IMP, there are not taking into account and the CATS screen doesn't display the value.
Am I using the wrong table ? wrong user-exit ? or my code ..
Thansk a lot again for your help.
Fanny GROUX

In 7.0 How do I add one CD at a time without all Cds being taken out?

I have upgraded to 7.0 and wanted to add a new CD, I used to find that when itunes was on it would upload a CD into my Library and I would drag and drop into my ipod section, easy.
Now I don't see the new CD, so I looked at the new sync part for music, I am no expert so I ticked Sync music and then ticked all songs and music and the whole lot of my music just went.
Luckily I had a backup of all my ipod stuf and am now adding it, don't know if it will all go in, will have to see.
My point is, if you want to add some CDs to your ipod, how do you do it without it taking everything out, I have nearly 9,000 songs so if anyone can help or give me a place to find out about this I will be very happy.
BTW does this happen in my video section too, I am afraid to try??
Many thanks, Chrisie.

You can set your iPod for manually managing
your music. It is an option in the iPod screen. Or
search the on-line help.
The alternative is that the iPod simply mirrors
whatever is in iTunes. That means it removes things
from the iPod if you remove them from your computer.
-- Michael
Hi Michael, there is no option in the music screen to manually manage my music, believe me I have been looking at this for 2 days now.
I have searched online for help and also not found anything, I cant understand why Apple puts something new on and then gives no instuctions on how to use it.
I went into thier Tutoral section and they are still showing you how to put CDs in the old way.
Anyway, thanks for your help.
Chrisie

How can I add the date next to time in menu bar?

Hi, I'd like to see today's date next to the "time" on the right-hand side of the menubar. I called Apple tech support twice about it and no one could help. The last guy suggested I post the question here, and someone might know of a third-party app... I don't want a calendar on my desktop, I don't want to click anything to see the date. I want it in the menubar with the time. It would be so handy.

SOOO AWESOME -- THANK YOU! I spent over an hour on the phone with two different tech support people and they said it couldn't be done. Have to admit it's sort of a dodgy workaround, but thanks for the link, V.K, I am SO pleased! I was even able to add a couple of extra spaces to keep the time and date spaced apart. (Maybe the next OS can resolve this in a simpler manner...)

Moving Average, Allowed Deviation, & Time Stamp Measurement

Hello,
I have this vi that take measurements data, finds running average, and suppose to count the number of times it exceeded the allowed deviation and time stamp whenever a measurement exceeds the threshold value from the running average. There is a problem in my algorithm, can someone please take a look?
Known problem:
-- number of exceeded times should reset only when cycle time=passed time.
I'll be happy to hear any suggestions you might have.
Thank you,
Solved!
Go to Solution.
Attachments:
moving_average1.vi ‏39 KB

I did a little work on your vi and simplified it. I think it is doing what you want. I am not sure what the threshold part is doing so I left it. You were having problems with the local variables and you had a few greater thans hooked up backward. If you do not understand what I did let me know and I will explain it.
Tim
Johnson Controls
Holland Michigan
Attachments:
moving_average1.vi ‏39 KB

How do I add moving averages to my time series graph is there a function on numbers on tr iMac?

Similar Messages

Maybe you are looking for