How do I change the Not Editable flag of a variable?

How do I change the Not Editable flag of a variable?  I need to edit the variable but right now the Not Editable box is checked.

You can't do it unfortunately.  That's why it pops up a warning when you check it in the first place.
Ok seriously though there is a workaround for this.  It's a total hack but may get you back to where you need to be without having to copy everything to a new sequence file. 
WARNING:  Not sure what versions of TS this will work with.
With the offending sequence file open go to Edit>>Sequence File Properties. 
On the General tab change the File Format to XML. 
Click OK. 
Save the sequence file.
Now browse to where you saved the sequence file and open it with Notepad.
Search for FileGlobal and look for the offending variable. <MyGlobal classname='Num' valueflags='1'>
It should have a property called valueflags.  It will be valueflags='1'.
Remove that property altogether.  So it should be something like this: <MyGlobal classname='Num'>
Save it and reopen it in TestStand.
You may need to change it back to binary format from within TestStand.
If deleting it gives you problems then just change the valueflags to 0.
Hopefully this helps.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Similar Messages

  • In updated Yosemite  Safari how can I change the Bookmarks edit view to a full list not icons

    On iMac with updated Yosemite I'm unable to locate how to change the "bookmarks" view to a list with Http addresses displayed instead of icons.  Any ideas?

    Try "Edit BookMarks".
    Click Bookmarks in the Safari menubar. Select "Edit Bookmarks"
    Click the triangle beside the folder to open the folder.

  • Newbie: How do I change the notes the bass plays

    I'm a newbie and I'm just trying to create a 12-bar blues with bass and drums that I can practice against. I've got my Drum track and an Electric Bass track. It's an A-minor blues but I don't know how to get the bass to move to the IV in the fifth measure (or the V in subsequent measures for that matter).
    Any hints would be really helpful!
    TIA,
    David

    drschwartz wrote:
    I'm a newbie and I'm just trying to create a 12-bar blues with bass and drums that I can practice against. I've got my Drum track and an Electric Bass track. It's an A-minor blues but I don't know how to get the bass to move to the IV in the fifth measure (or the V in subsequent measures for that matter).
    Any hints would be really helpful!
    TIA,
    David
    IMO this is the single biggest flaw in all of GB. This is a common musical task, and GB makes it unintuitive or impossible to automatically achieve.
    Here's the best way to do this automatically, as is:
    Select your region and go to the edit window.
    Pitch shift up by half steps:
    5 half steps brings it up to the IV
    7 half steps brings it up to the V
    The problem is that the transpositions will be literal. Typically, you'd want the V to be major - a dominant chord leading back into the I (minor in this case). But literally moved up by half steps, your V will be minor, a mirror image of the original loop starting 7 half steps up.
    This may be helpful anyway.
    Otherwise, as Poflynn suggests, you can manually move things around in scroll view and get just the notes you want.
    Best would be an ability to transpose to a musically meaningful note in the scale in the language of music, just as you said - IV, or V - and have the program offer options for quality of chord (minor, major, etc.).

  • How i can change the Goods Receipt flag in PO me21n

    Hi,
    While creating the material PO.I am seeing the GR Flag it is activated always and i can see in a display mode.
    I want to change GR Flag into editable mode.I know it is possible but i am missing navigation.Please help me how i can achieve this.
    Thanks
    Micheal

    Hi,
    Simply Go To Spro-->MM->Purchasing-->Account Assignment>Maintain Account Assignment Categories>Select The account assignment for which you are creating the P.O-->And Double Click It>Unclick the button GR Ind. Firm->Save and create now PO you can edit it.
    Lekhram
    Award Full Points ...Haha ..enjoy.

  • How do I change the external editing application?

    I set my external editing application to something other than what I want it to be now, and I cannot find a way to change it.

    iPhoto preferences - select edit in and reselect the current external editor - a selection window will open so you can select a new one
    LN

  • How do you change the midi channels of a region?

    Lets say i have a region recorded on midi channel 1, how do I change the notes to be midi channel 2? Thanks

    Depends.
    First of all, are you talking about a MIDI region or an Audio region (Audio regions can "be on a MIDI channel", so to speak, if they contain controllers, i.e., volume, pan, etc.).
    So let's say you're talking about MIDI regions for now.
    The first order of business is to recognize that the actual channel of the MIDI events contained in the region is determined primarily by the MIDI channel that your controller is sending on. For simplicity sake, let's say your controller sends on channel 1, and the track you're recording on is set to play MySynth on channel 1.
    If you're wanting to change the channel from 1 to 2, chances are you want to do this to assign this part to play a different sound on a multi-timbral synth. Let's say that the MySynth object -- as seen in the Environment -- is indeed a multi-timbral synth. If the synth selected for that track is currently assigned to play MySynth 1 (i.e., channel 1), just change it to MySynth 2 (from the track's menu).
    Now, if you opened the Event Editor, you'd see that the channel of the MIDI data is still on channel 1! This is normal. Logic is able to "channelize" the data when you select a destination instrument that is on a different MIDI channel from the one that the data was recorded on. So if your track is now set to play MySynth 2, you can go into the Event Editor all day and change the MIDI channel of the data, but it will still be channelized to channel 2 because that track is assigned to play MySynth on channel 2.
    There are many many reasons why you might still want to change the MIDI channel of the data in the Event Editor despite the channelizing that goes on. But without going into a whole shpiel about these kinds of applications, just know that the primary way to change the MIDI channel is to select an instrument on the desired MIDI channel.

  • Change the volume image flags values

    Hi
    I am using Windows 8.1 Update and Windows ADK.
    Without using the ImageX command, how do I change the volume image flags values displayed with the Dism /Get-ImageInfo /ImageFile:"<WIM_File_Path>\<WIM_Name.wim" /Index:<Image_Index> command?
    Where are these values ​​stored?
    Thanks
    Bye
    Balubeto

    Hello,
    If you want change the value, you can use the command line (imagex) or one tools (Gimagex)
    https://www.autoitscript.com/site/autoit-tools/gimagex/

  • How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

    How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

    Most forms (99% or more) are created for simple text input, where you cannot change anything.
    The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look.  But I'm sure they would show some kind of controls to alter the text appearance.

  • How can i change the ringtone for different contacts.  "edit contacts" won't let me`??

    how can i change the ringtones for different contacts on the razor.  "edit contacts" wont allow me to

    Here is the Instructions your Looking For:  Down towards the Bottom of the Instructions shows how to set Ringtones for each Contact.
    How do I download and use ringtones on my DROID  Razr & RAZR MAXX?
    Quick links
    Set any of your songs on your SDcard as a phone ringtone
    Choose Phone ringtones through settings menu
    Customize the text message ringtone
    Assign a ringtone to a specific contact
    Download ringtones from Play Store      
    1. Set any of your songs on your SDcard as a phone ringtone:
    Touch Apps > My music
    While the music is playing, touch the phone Menu Key > More > Use as ringtone 
    The ringtone is set as your default incoming call ringtone and copied to your Phone ringtone list.       
    Note: The above instructions are for the My music player and not for other players such as Play music.      2. Choose Phone ringtones through settings menu:
    Press the Menu key
    Touch Settings
    Touch Sound
    Touch Phone ringtone  (If option is greyed out, make sure handset volume is not set to Silent Mode)
    Select a Phone ringtone from the list. Press OK to set. (Music files you have set as Incoming Call ringtone from your SDcard will be included in this list along with downloaded and preloaded ringtones.
    3. Customize the text message ringtone
    From the homescreen or from within the applications tray, touch Text messaging
    Press the Menu key (On the left with 4 squares)
    Touch Messaging Settings
    Touch Select ringtones (if option is greyed out, make sure Notifications is turned on / actived)
    Touch on any Notification ringtone to select and hear a sample.
    Press OK to set as notification ringtone
    CLICK HERE for instructions on creating your own custom ringtone for Text Messages
    4. Assign a ringtone to a specific contact:
    Press Contacts icon on homescreen or tap on Contacts application from the Applications Tray
    Touch and select the specific contact
    Press the menu key
    Touch Options
    Touch V (down)  icon next to Ringtone
    Choose a Phone ringtone from the list and tap OK to set.
    Note: To assign a music/song from your memory card as a ringtone, first follow step1 above and follow step 4 again. 5. Download ringtones from the Play Store
    From the applications menu, touch Play Store
    Touch search  to search for ringtones.
    Answers others found helpful
    How do I setup and use Bluetooth on my DROID RAZR MAXX?
    How do I transfer files to/from my DROID RAZR MAXX?
    How do I set up and use the Smart Actions application using the DROID RAZR MAXX?
    How do I use the DROID RAZR MAXX for video chat?
    How do I force my DROID RAZR MAXX to reboot or restart?

  • Hello, how do i change the language of a film on the appel tv, i know i can change it on my pc but not abbel to change it on the apple tv ?

    hello, how do i change the language of a film on the appel tv, i know i can change it on my pc but not abbel to change it on the apple tv ?

    Unforunately you can't.  Its like if you went to a video store there in Netherlands and bought a DVD then got it home and found out it was in Dutch and there is no other audio options.  There is no way to magically dub the movie in English. Your iTunes and iPod settings only govern your menus and preference IF alternate options is available already coded into the file, but most movies downloaded from iTunes aren't going to have multiple language audio tracks.  If you can't access the U.S. or British store and your kids don't speak Dutch yet, then you will just have to find some other way to get movies for them than iTunes.
    The reason for this is legal reasons.  In the United States I am only able to purchase videos authorized for sale in the United States.  In Britain, you are only able to purchase videos authorized for sale in Britain. Same with Netherlands.  Now, with DVDs you could get a regionless DVD player and order your DVDs from Britain or America to get English versions, but you can't do that with iTunes... No British address, no British store access.  No British store access, no movies in English.
    Sorry.
    EDIT: OK I have what i HOPE is good news for you.. I double checked my movies and found out that they do in fact have two audio tracks! In my case, both are English, one being Stereo and one being Surround Stereo though   SO, when you open the movie, you should see a little chat bubble on the right side of the little popup menu at the bottom of the screen when you move your mouse.  Click that, and there MAY be more audio options there... If there isn't, then you really are out of luck. 
    Message was edited by: AbsolutGrndZer0

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • My email address on my i phone is old and i can not seam to change it. this results in my not being able to log in. How do I change the email address?

    How do I change the log in email ID on my I phone. I have done so on my account but can not do so on my I phone and it wont let me log in

    Settings>Store...tap the ID shown...sign out...now sign back in with the ID you want to use.

  • I changed my Apple ID email address yesterday and now my IPhone 4 and my Ipod 5 will not allow me to upload any apps as they both still show my old email address.  How do I change the email address on the devices???

    I changed my Apple ID email address yesterday and now my IPhone 4 and my IPod 5 will not allow me to upload any apps.  When it asks for my Apple Password it still shows my old email address.  How do I change the IPhone and IPod to recognize the new email address????

    Hello there, emsariel.
    The following Knowledge Base article offers up some great information in regards to the issue you are describing:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • How do i change the email address for my icloud account on my 4s. when i sign in on line it is my new email address so i thought it would change automatically but obviously not!

    how do i change the email address for my icloud account on my 4s. when i sign in on line it is my new email address so i thought it would change automatically but obviously not!

    Settings>iCloud...scroll down...delete account. Then setup iCloud with your new ID.
    You can't change the Apple ID for your iCloud account, you have to delete it.

  • HT5622 My husband and I share the same apple id for our iphones, how do we change the phone number associated with our apple id to his phone number? He is getting my messages because the ipod has my number in it not his?

    My husband and I have iphones that use the ame apple ID, but different numbers and email addresses, how do we change the phone number that is associated with his ipod to his phone number?

    Use his ID for Settings>Messages>Send And Recieve and for Settings>FaceTime.
    If he does not have an ID then
    Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Maybe you are looking for