How do I configure AppleTV to connect to a hotel network?

On a computer or iPad, the hotel network would bring up a browser that asks me to confirm my room and adherence to terms. How can I do this with AppleTV?
Thanks,
-bs

If you have a laptop that can share internet, you can plug your laptop into the LAN connection, and create a new wireless network, which you could then get your ATV to talk to.

Similar Messages

How to have my dial up connection added to the network utility program?

how to have my dial up connection added to the network utility program for monitoring? though i am connected by dial-up, the connection is not monitored by the utility program. the drop down box there does not show the modem at all. ?

Huh? I don't understand what you are asking. I just pulled up the network utility and I don't see what kind of connection monitoring it does for any kind of connection? What kind of information are you looking to obtain? What problem are you interested in solving by having your question answered?

My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems.

How best to configure a WRT54GS connected to a BEFSR81 connected to cable modem?

I know it is old gear, but it's all I have. I have an office in my home. I have a wired router (BEFSR81) which is connected to my cable modem and has seven wired connections to it: four computers, two printers and a wireless router (WRT54GS). The wired router performs DHCP service for the network: four computers (at 192.168.1 100-103). The printers are at static addresses outside the DHCP range (192.168.1.150 and 155). I want the wireless router to accept wireless connections from friends who stop by (or if I decide to go out on the porch with my laptop).
How should I configure the wireless router so that it allows wireless entities (laptops, Roku, etc.) to connect to my network. What IP address should it have off my wired router, and will my wired router's DHCP provide IP addresses to devices attaching to the network through the wireless router? For the convenience of cabling, I would prefer to have my wired router as the primary router if possible.

You might wanna check this out:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=3733

HT1595 How do I get Appletv to connect to my network??

I can't get my Appletv to connect to my network, but it will connect to my neighbor's network! My network is working fine (my laptop is connected). The router is about 12 ft away and unobstructed. I've tried restarting both the router and Appletv. What else can I do?

Unless its an iPhone that's what you're stuck with I think.. iMessage only works between iOS devices if you're sending from the iPad

How do I configure my mac to see a windows network HD?

I recently purchased a Mac and want to be able to open files on my NTFS network hard drive.
How do I configure my Mac to see the HD??
I can use some help.
Thanks
Ron

On the iMac turn on File Sharing on at System Preferences - Sharing - check the File Sharing box. You will also need to set the Windows machine to allow file sharing. Once you have the connection made you will see the Sharing turned on in Finder. It will look similar to:

How can I get airport to connect automatically to wireless network?

I temporarily switched from a DSL internet provider to a cable provider, and then back to my old DSL Internet provider. My g5 iMac computer connects to the network through a wireless Belkin router.
Since I switched Internet providers, every time I turn on my computer, it no longer automatically connects into the wireless network. Instead, to connect I now have to manually select the network.
I'd really appreciate tips on automating this step. My kids use this computer and due to parental restrictions, they do not have rights to connect to the network.

Hi there,
Strictly speaking changing how the internet is coming into the wireless router should not affect the wireless and how machines connect to it, but however to get you out of a hole I would say create a new Location for your home and start again.
Basically,Disable your wireless first, then in your network settings there is a drop down box at the top of the panel where you can change and create new locations. Create a new one, then select it and click Apply. Now enable your airport and connect to the wireless, once that is done you should be good to go.
Hope that helps,
Callaghan001

How do I configure AppleTV from US to Norwegian

I have entered new adress and new form of payment, yet not possible to configure the rental of films. How do I do it?

for many years I had to buy certificates from US for a certain amount to rent films via AppleTV. Now I can rent films from Norway. But seems I need to do something more after I have registered in Norway and form of payment is changed? Appreciate if someone knows

How can I configure to use a HP Laserjet 4000 network printer on Solaris 8?

Hi,
I have to configure a Solaris 8 machines to print some doc on a network HP Laserjet printer. However, I have no idea how to configure it. Do anyone have some suggestion how to do it?
Do I need JetDirect to do so?
If yes, how can I get it?
Thx a lot!

Easiest and quickest way is with Jetdirect or the later HPPI - both available from HP.

Connecting to a hotel network while traveling

Help! My boss has taken her Macbook laptop (OS 10.5x) with her overseas. She is at a luxury hotel that offers internet service. And she needs to connect to the internet, and I don't know what to tell her. When I've done it before in the past for myself, I usually just plug in the ethernet cable, open Safari and agree to the hotels terms and conditions, and then it's all set. Is it that easy? Am I missing something? Also, she uses MS Entourage for email. Do any of those settings need to be changed?
Thanks!

As for the email question, I was thinking that maybe the hotel's ISP would require her to use their outgoing mail server. If not, then I think she should be ok.
I would think the Hotel would not want to get involved with providing transient email services for customers that come and go daily/weekly.
Now whether or not her mail server allows access from outside is another question.

How to configure Dynamic Data Connection for Business View

Hi,
How can we configure Dynamic Data connection that we can save the profile of the connection to somewhere that we do not need to enter it everytime when we refresh the report?
thanks and regards
nora

Hi James,
Thanks for the reply. Its solved now. For anybody if interested you can set the dynamic email address either i) having it as part of payload - In this case use the xpath to query the payload varaible ii) use identity service - follow the following steps
1.Create a user in Application enterprise manager/also you can use a existing account, if u are creating a new one assign the correct role
2. In either case edit the user-properties.xml(bpel/system/services/config) file for the corresponding user and add an attribute called email
3. Bounce the server for this changes to take effect
4. In the notification properties in the to address use ids:getUserProperty and pass the attribute name

HT3500 how do i make my printer connect to a new SSID

I have a new wireless address, and my printer's setting is the old wireless SSID. so my printer is not connected.... how do i make the printer to connect my new SSID??

You have a printer question, not an AirPort question. No adjustments need to be made on the AirPort if wireless is working for other devices.
Check the documentation that came with your printer to see how to reset the device back to the original default settings it was using when it was new.
Then, configure the printer to connect to the "new" network....just like you did when you configured it to connect to the "old" network.
If you need more info, you need to contact support at the printer manufacturer.

Configure cisco vpn connection in linux console

Hi all,
how do I configure cisco vpn_client connection in ubuntu/debian/raspbian linux console using .pcf file?
Thanks ahead.

I mean, what packages should I install?
Is it possible to use only "apt-get install" or I should also use "dpkg"?
Is it possible to avoid using any guid interfaces because it is headless pc?
I'm asking because I successfully use openvpn connection in console and I hope that cisco vpn is also possible here.
Thanks for your attention and best regards!

How to restrict number of concurrent connections etc.

Hi,
I'm able to use wi-fi thru WRT54GC.
I want to know:
1. How to restrict number of users connecting to the wireless network that is setup thru my router?
2. I also want to know about any monitoring software which can tell me about connected PCs, user names, bandwidth available, bandwidth utilized etc.
Thanks in advance
Rajeev

1. logon to router's setup page, open I.E. and in the address bar type 192.168.1.1, it would ask for username and password, put "admin" default password without any username... click on the wireless tab >> wireless security >> try setting up wireless security as per the requirements, also you can setup wireless MAC filter and you can setup MAC address of wireless computers which you want to allow to coonect to the network...
2. not quiet sure about monitoring software which would show you detail log about bandwidth, bandwidth utilized by each computer...however you should view router's logs from linksys "logviewer" utility...go to ftp.linksys.com/pub/network and download the "logviewer" utility.
let me know if you have any issues.

HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.

I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

How do I configure AppleTV to connect to a hotel network?

Similar Messages

Maybe you are looking for