How do I do this... rollover effect.

Hi,
I have been doing some layout in Photoshop for a basic website. I have one .jpg which will be my background. I have created some thumbnails (filmstrip area), and I want them to highlight as the mouse goes over them. At the same time I want the image at the bottom to change to correspond to the thumbnail.
I know how to do the behavior "swap image" part. What I am unsure of is whether I should make image maps over the thumbnails or if I should make slices for each thumbnail in Photoshop.
Here is my .jpg
http://test.taffyproductions.com/
Thanks.

I'm curious as to why you say "I should be using css to
create the layout
instead of tables">
Anyway:
http://www.dwfaq.com/tutorials/basics/disjointed.asp
"grynchman" <[email protected]> wrote in
message
news:f5c5ka$1kt$[email protected]..
>
http://www.gunnar.ca/layout.htm
>
> I am attempting to design a site. I have the idea for
the layout and have
> created it using tables at the address above. I realize
I should be using
> css
> to create the layout instead of tables. First of all -
is this layout
> difficult
> to create using css - and where would I start with that?
I ordered an
> HTML/CSS
> book and will dig in when it arrives.
>
> Secondly - I want an image to appear in the empty space
(where there is an
> empty table right now) when I mouse over a menu item -
ie when I mouse
> over
> "wood veneer" I want a graphic to appear in the empty
space - that would
> be
> java script, no?
>
> So I would layout the page using html and css, then add
some java script
> in to
> make the roll over thing happen?
> __________________
>

Similar Messages

How can I create this rollover effect in Flash CS5?

I'm pretty new to Flash, and I want to create a button like these.
I understand how to make a basic rollover button, but I haven't got a clue how to do animation like that.
http://www.werkstette.dk

the easiest way would be to create one movieclip that has
1. a rectangular mask (to mask everything),
2. a dynamic textfield with whatever colored and embedded font.
3. whatever colored background
4. another textfield that has a y property greater than the mask so it's not visible until the mask is rolled over. embed the font
5. another background for the rolled over movieclip
everything will need instance names so you can control with actionscript. you can then assign rollover and rollout code to your movieclip mask.
on rollover, you'll tween the first textfield (and possibly background) to a y less than your mask. tween the textfield with easing. and you'll tween the 2nd textfield and 2nd background to about the same y as your mask. again, tween the textfield with easing but not the background.

How do I create this rollover effect?

http://www.gunnar.ca/layout.htm
I am attempting to design a site. I have the idea for the
layout and have created it using tables at the address above. I
realize I should be using css to create the layout instead of
tables. First of all - is this layout difficult to create using css
- and where would I start with that? I ordered an HTML/CSS book and
will dig in when it arrives.
Secondly - I want an image to appear in the empty space
(where there is an empty table right now) when I mouse over a menu
item - ie when I mouse over "wood veneer" I want a graphic to
appear in the empty space - that would be java script, no?
So I would layout the page using html and css, then add some
java script in to make the roll over thing happen?
__________________

I'm curious as to why you say "I should be using css to
create the layout
instead of tables">
Anyway:
http://www.dwfaq.com/tutorials/basics/disjointed.asp
"grynchman" <[email protected]> wrote in
message
news:f5c5ka$1kt$[email protected]..
>
http://www.gunnar.ca/layout.htm
>
> I am attempting to design a site. I have the idea for
the layout and have
> created it using tables at the address above. I realize
I should be using
> css
> to create the layout instead of tables. First of all -
is this layout
> difficult
> to create using css - and where would I start with that?
I ordered an
> HTML/CSS
> book and will dig in when it arrives.
>
> Secondly - I want an image to appear in the empty space
(where there is an
> empty table right now) when I mouse over a menu item -
ie when I mouse
> over
> "wood veneer" I want a graphic to appear in the empty
space - that would
> be
> java script, no?
>
> So I would layout the page using html and css, then add
some java script
> in to
> make the roll over thing happen?
> __________________
>

How can i apply this glowing effect in logo with illustrator?

How can i apply this glowing effect in logo | ThemeForest Community Forums

I would make several copies of the original artwork. On each copy, section the individual areas to be gradients. It looks like you have at least four gradients, both linear and radial. It's just a matter of building each section and then reassembling each. Not too complex, yet nice piece of artwork.

How do I create this gloss effect?

Hi there,
Currently I'm building a master based on someone else's work.
I'm trying to remake a gloss effect, but I can't figure out how she did it.
In one of the files, I found out how it works.
The gloss effect is a pentagon placed over an image, like in the picture I included.
Can anyone help me on how to recreate a pentagon like this?
Thanks a lot in advance!

Check the color of the overlaid polygon, and it's blend mode and transparency in the Effects panel.

How do I achive this dotted effect

http://www.istockphoto.com/file_download_approved.php?RequestExtendedLicense=0&quantity_34 =1&quantity_35=1&quantity_36=1&quantity_37=1&quantity_38=1&quantity_39=1&quantity_40=1&IAg ree=&fileID=3781774&ConcreteTypeID=8&inPoint=0&outPoint=0&action=accept&x=15&y=9
To the left - at the menu - are tiny dots under each item
that seem to fade out from left to right. Is this done in CSS? Can
I do this to the menu items on this page:
http://www.gunnar.ca/environment.htm
How do I achieve this? Any help appreciated.
Thank you.

Hello,
The dots are an image, and it is done with CSS. The dot image
is applied as the background image in a link.
Specifically, it's applied to the bottom and given the
attributes to start on the left and not repeat.
#nav a
display: block;
font-size: 12px;
color: #000;
padding-left: 10px;
line-height: 22px;
vertical-align: middle;
background: url("/images/sidenav-dotline.png") left bottom
no-repeat;
You vertical navigation uses rollover images, so some options
are:
a) Add dots to the bottom of each image.
b) Rebuild your menu using a dotted background image on the
links like they did. (You'll lose your faded text and
over/underline that you achieved by using images but the page would
load faster).
c) Your rollover images are each in a table cell, so you
could give the table cell some padding to lift the images off the
bottom of each cell, then apply a dotted line image as the
background for each cell, positioned at the bottom left and not
repeating.
Hope that helps,
Tim

How do you do this pan effect?

I want to do this certain effect on video where the camera pans or zoom really fast and you see a blur and streaks of lines. (You see it in a lot of transitions between shots) I tried doing this on FCP alone... by retiming the exact moment of the pan to make it faster, and adding a simple blur effect. I'm not able to achieve this effect because I can never make the pan fast enough or streak of lines.to appear. So now I turn to Motion, and I've never worked with Motion before. Does that all make sense?

I've done this and the easiest way is to shoot it yourself.
Hold the camera out as far as is comfortable (the lighter the better, in this instance a domestic camcorder will suffice.)
Then simply pirouette as fast as you can maintaining your balance. Try a variety of backgrounds - daylight is best - and a variety of angles.
Oh and be careful not to get dizzy and lose your balance - falling over can be rather embarrassing.
P.S. It's probably best to avoid performing this close to the water's edge, near cliffs, Niagara Falls, Grand Canyon etc... (Y'know Health and Safety and all that...)

How do I get this rollover and click effect ?

Hi,
I have found a template which I rather do like. I was wondering if someone knew the coding to make some of the effects used possible.
The aforementioned template - http://www.templatemonster.com/flash-templates/33686.html
The effects:
1. When you roll over the images they enlarge? What is the code or option that allows me to do this in Flash?
annnd,
2. When you click on one of the images it allows for a portfolio to load. If you visit the site and click on one of the options you will understand. How is this effect done?
Any advice or help would be greatly appreciated.
Thanks!

To enlarge something in Flash using code you simultaneously increase the height/width or scaleX/scaleY (AS3) properties of the object. To animate the size increase gradually you would use tweenng code. To have it happen using a rollover you assign an event listener to the object for a ROLL_OVER event. There would be something similar at work for a ROLL_OUT event to make the object reduce back to normal.
The appearance of a portfolio (or any section) involves animating it into place from off stage. To do this with code involves gardually adjusting the x (horizontal position) property of the object, again using tweening to get a smooth animation. To have it happen using a click you assign an event listener to the object for a CLICK event.

How do I create this text effect in motion?

Hi,
I am a bit of a motion newbie - and am stuck as to how to replicate this sratchy/jumpy/glow text effect found in the video preview here . . . .
http://www.worshiphousemedia.com/index.cfm?hndl=details&tab=MM&id=4609
(click the video in top left)
If anyone can offer some help it would be greatly appreciated.
Warmest Regards,
Adam

mark, patrick, pierre and Longstrider - thankyou - sucess!
Longstrider- special thanks for your fab run through I knew it couldn't be too tricky... hehe - it really isnt!
I have got it shaking and mimicked exactly as in the sample vid clip - now i just have to add the randomisation on opacity, and perhaps some graininess to the text (text edging&fill is a bit sharp and clean).
Once again - thankyou so much!
Warmest Regards,
Adam

How do I create this particle effect?

I am pretty new to After Effects and I'm getting to grips with all the particle effects and have managed to create some cool looking animations, but I'm trying to create the particle effect as seen in the image link below. Can anyone tell me how this is done, and what plug-in (if any) would be used to create something like this? I can't get anything I do to look like this. Thanks...
http://img171.imageshack.us/img171/5001/particleskf1.jpg

Create the custom particle in Photoshop or a separate comp. Drag the custom particle into your main comp, turn its visibility off, set Particular's particle setting to "Custom Particle", and choose the new layer as the source.
Create a camera for the comp and turn on "Depth of field". Experiment with the settings until you get the desired effect.
Personally, I'd use two Particular layers for that look, one for the larger particles and another for the smaller ones.

How can I have this widget effect in Eclipse platform?

Well, my project now demands such a widget in user interface with the requirements as follows:
This widget can display both text, icon, and even button. If the text on it is too long to display completely, omission marks should replace the redundant words. It is also selectable which is similar to a cell in the JTable, but it should support displaying icons as I said, and should only be scaled in size horizontally but never vertically.
Fortunately, I find that a component in the dialog shown during build or update process meets my request. Does anybody who is familiar with SWT know
how this is managed? That is, which widget(s) should I use? Or can Swing meet my demand? By the way, here is the capture image of eclipse dialog I concerned: http://freehost21.websamba.com/utarget/Eclipse_snap.jpg
Many many thanks!

Widgets. You'll need to probably create a subclass of JPanel, which will have a JLabel for the icons, and a JButton.
You'll probably need to call setPreferredSize(..) on the button to obtain the text trailing effect when the text overflows the boundaries.
Also, you could add a mouseListener to the panel to create the selection effect when it is clicked, or when any of its sub components are clicked. (recursion methods help to achieve this).
Scaling in size, now that is tricky. To do this, you'll probably have to calculate the width of the panel manually, by summing up the heights of the components and maintaining a fixed width. No an easy task though.
This is a nice component, so get writing. Here is a little help with the recursion
public void setComponentEnabled(Component c, boolean b) {
   c.setEnabled(b);
   if(c instanceof Container) {
        Container co = (Container)c;
        for(int x = 0; x < co.getComponents().length; x++) {
              setComponentEnabled( co.getComponents()[x], b);
}Go on and have some fun. Check in if you have any more problems. Other are always willing to help if they can.
ICE

How do i get this photo effect

Can anyone tell me how i can achieve that cartoon look to people in my photos?
check out samples by this artist
http://120designs.net/joomla/index.php?option=com_morfeoshow&task=view&gallery=1&Itemid=53

what i personally recommend is for you to learn about using "lab" colour in photoshop....you can do exactly what that plugin does yourself by converting the image to lab first and playing with the a and b amongst others.
lab colour has to be one of the most unused, yet one of the best things inside the beast known as photoshop!
I learned this technique (amongst others) from a great graphic designer and team leader, Sam Blake:
- one part is cutting out the silhouettes of the people.
- create a duplicate of that layer, use guassian blur at 15pixels (depending on the size of your image...may be much lower...play around), then set the blending mode of this layer to "darker colour"....brings out some lines, etc
- create a duplicate of the original layer, drag it to the top, use guassian blur at 15pixels (depending on the size of your image...may be much lower...play around)
use "exposure" and over expose the duplicate. set this layer to "overlay" and set the opacity to 40%
then lastly, just use a layer/folder mask to delete away the areas that you don't want affected by the effected! (lol) ...while keeping your original "clean" image as the base underneath all the other layers.
all the settings are approximations and work different for each image and image resolution. and its best if you have some form of stylus pen (ie: wacom tablet)
of course as with anything, there are thousands of ways of doing these effects. good luck and happy experimenting!

How do I create this window effect?

I was looking at this photo
http://image.shutterstock.com/display_pic_with_logo/442024/442024,1297015560,3/stock-vecto r-download-button-set-vector-set-for-web-70603081.jpg
trying to figure out how they get the little window to appear like that.
I can create the window panes by creating rectangles, but curing it around like that, i am not sure of.
I tried "shear" bu it chops off some of the window instead of just curving it around.
Can anyone point me in the right direction?
Thanks for your help.

Hello, select Edit>Transform>warp. OR get the free transform tool, and click the warp button on the option bar.

How do i create this cool effect?

http://www.youtube.com/watch?v=ae_DKNwK_ms&feature=channel
i love this style and have seen it get used heavily but i have now idea what it is called. what should i google?
could someone please let me know what programs were used to make it?
can this be done in flash? or is it encore and after effects?
is there a tutorial out there?
are there other/better examples?
thanks!

3DS Max?
so nothing in my master collection can do this? thanks for the direction. i'll start exploring, i just hope there some way to do this without spending another $3k on software...

How can i create this videos effect ?

Hello, i am new here, and i have a project in my hand. I have to create a slideshow presentation on certain subject. I have completed the slideshow using a tool called,PhotoStage Slideshow Producer, with a bunch of 60 images. Now i want to add a small video effect in the beginning of the slideshow to make it look more professional. Here is the download link for the video. http://www.mediafire.com/download/i5az6a7rjp3lbkn/Video.rar This video is farely advanced for my liking, but you got the general message. I want something really simple and i want to add it in between different images for some effect. I may be asking in the wrong forum, again. Can Adobe’s Premiere Pro do it , or is there some other simple program that can make these kind of effect. Thank you.

Might be able to create it with Filter > Render > Clouds with your foreground and background colors set to the lighter and darker versions of your selected color. Then you might need to use Filter > Blur > Gaussian Blur to smooth things out

How do I get this edge effect

I pulled a photo from a pdf for online viewing so it is poor quality. It shows an effect - blurry edges - which I have tried to put onto a photo but I cannot do it. Most of the effects I have tried involved vignetting, but I have also tried selecting all - the border - twisting effect, etc. But I haven't been successful Can anyone help?
Thanks
PS Tried to upload photo but this is not allowed, apparently. I hope my query above will be sufficient (though it probably isnt - the picture tells the story, but I am not allowed to show you).

Hi Scott
Thank you for replying and I can see that you have got the effect on the sample photos, but I cannot replicate it!!
I have the mask (red) and have covered the edges of the mask with a large soft paintbrush, applied the lens effect. When I leave the quick mask I am left with a selected area (the brushed area). If I deselect this area the picture remains the same (no blurring at the edges). If I make a new layer then all I have is an edge in the shape of my brushed area and if I click off that new layer then the layer I had quick masked is missing the edge - just left with a jagged transparent area around the centre of the original photo.
I am not used to using masks - my knowledge of Photoshop is quite limited - so perhaps instructions going 1, 2, 3 would be better for an inexperienced person like myself.
The photo I am working on is a landscape with a building and is much more complicated than the sample I showed (and the one you worked on). Maybe I need to do a heavier blur/brushing???
Thanks

How do I do this... rollover effect.

Similar Messages

Maybe you are looking for