How do I fix an object to an Ind file but be able to edit layers behind it?

I'm aware of having a master page at the top that fixes the images for the rest of the pages, however I need to be able to add and move images around that fit behind the fixed image.
In this case I'm designing greetings cards and don't want my logo on the back to be altered, however the layers that would sit behind this I need to keep altering for various version of the card but I keep accidentally moving the logo which means when I view all my cards together I can see the logo is jiggling slightly.
Thanks
V

Simply add an image frame behind the logo on the master page and then convert it to an individual object by Alt+clicking on the actual pages. Ask in the ID forum for otehr alternatives and ideas.
Mylenium

Similar Messages

  • How do i fix my itouch. the screen is black but it still responds to touch

    How do i fix my itouch. the screen is black but it still responds to touch

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

    On Pages 09, my word documents I've been saving it to iCloud, to access anywhere, but I would like to keep my docs organized in files on my finder as usual, and saving to iCloud, I lose my local one.How can I fix it and not desorganize my files?

    It's either in local folders, as it seem you had been doing, or in icloud.  If you go into the mac's Pages and view the icloud files, you can drag on onto another to create a folder.  But you can only have folder one level deep, so you can't organize your files/folders like you can on a mac, using nested folder several levels deep.

  • How to call GOS(Generic Object service) attachment ( BMP file ) into SAP

    How to call GOS(Generic Object service) attachment ( BMP file ) into SAP script
    Example: MM02 Service object there attaching the bmp file the same file i need to call script based on the material number
    Please provide the procedure and  coding.
    Thanks in advance
    Raju

    Hi,
    The following link may be useful to u.
    help.sap.com/printdocu/.../BCSRVOBS.pdf

  • How do I fix the failure to read Pdf files?

    How do I fix the failure to read Pdf files(Many old and some new) with new acro reader 11?

    What is your operating system?  What exactly do you mean "failure to read"; do you get an error message?

  • HT1430 I have tried the hold the buttons down until it goes off and all that so how could I fix it.? It looks regular but I can't touch it and slide the slider or anything like that

    I have tried the hold the buttons down until it goes off and all that so how could I fix it.? It looks regular but I can't touch it and slide the slider or anything like that

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How can I write new objects to the existing file with already written objec

    Hi,
    I've got a problem in my app.
    Namely, my app stores data as objects written to the files. Everything is OK, when I write some data (objects of a class defined by me) to the file (by using writeObject method from ObjectOutputStream) and then I'm reading it sequencially by the corresponding readObject method (from ObjectInputStream).
    Problems start when I add new objects to the already existing file (to the end of this file). Then, when I'm trying to read newly written data, I get an exception:
    java.io.StreamCorruptedException
    at java.io.ObjectInputStream.readObject0(Unknown Source)
    at java.io.ObjectInputStream.readObject(Unknown Source)
    Is there any method to avoid corrupting the stream? Maybe it is a silly problem, but I really can't cope with it! How can I write new objects to the existing file with already written objects?
    If anyone of you know something about this issue, please help!
    Jai

    Here is a piece of sample codes. You can save the bytes read from the object by invoking save(byte[] b), and load the last inserted object by invoking load.
    * Created on 2004-12-23
    package com.cpic.msgbus.monitor.util.cachequeue;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.io.RandomAccessFile;
    * @author elgs This is a very high performance implemention of Cache.
    public class StackCache implements Cache
        protected long             seed    = 0;
        protected RandomAccessFile raf;
        protected int              count;
        protected String           cacheDeviceName;
        protected Adapter          adapter;
        protected long             pointer = 0;
        protected File             f;
        public StackCache(String name) throws IOException
            cacheDeviceName = name;
            f = new File(Const.cacheHome + name);
            raf = new RandomAccessFile(f, "rw");
            if (raf.length() == 0)
                raf.writeLong(0L);
         * Whne the cache file is getting large in size and may there be fragments,
         * we should do a shrink.
        public synchronized void shrink() throws IOException
            int BUF = 8192;
            long pointer = getPointer();
            long size = pointer + 4;
            File temp = new File(Const.cacheHome + getCacheDeviceName() + ".shrink");
            FileInputStream in = new FileInputStream(f);
            FileOutputStream out = new FileOutputStream(temp);
            byte[] buf = new byte[BUF];
            long runs = size / BUF;
            int mode = (int) size % BUF;
            for (long l = 0; l < runs; ++l)
                in.read(buf);
                out.write(buf);
            in.read(buf, 0, mode);
            out.write(buf, 0, mode);
            out.flush();
            out.close();
            in.close();
            raf.close();
            f.delete();
            temp.renameTo(f);
            raf = new RandomAccessFile(f, "rw");
        private synchronized long getPointer() throws IOException
            long l = raf.getFilePointer();
            raf.seek(0);
            long pointer = raf.readLong();
            raf.seek(l);
            return pointer < 8 ? 4 : pointer;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#load()
        public synchronized byte[] load() throws IOException
            pointer = getPointer();
            if (pointer < 8)
                return null;
            raf.seek(pointer);
            int length = raf.readInt();
            pointer = pointer - length - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            byte[] b = new byte[length];
            raf.seek(pointer + 4);
            raf.read(b);
            --count;
            return b;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#save(byte[])
        public synchronized void save(byte[] b) throws IOException
            pointer = getPointer();
            int length = b.length;
            pointer += 4;
            raf.seek(pointer);
            raf.write(b);
            raf.writeInt(length);
            pointer = raf.getFilePointer() - 4;
            raf.seek(0);
            raf.writeLong(pointer);
            ++count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCachedObjectsCount()
        public synchronized int getCachedObjectsCount()
            return count;
         * (non-Javadoc)
         * @see com.cpic.msgbus.monitor.util.cachequeue.Cache#getCacheDeviceName()
        public String getCacheDeviceName()
            return cacheDeviceName;
    }

  • How do I fix my volume when ringing it works but it does not work for games and movies

    How do I fix my phone volume it works when the phone rings but for all the other things the volume does mot work for example games and other sounds don't work.

    Hm, it sould like liquid damage to me.

  • XSLT - How to pass a Java object to the xslt file ?

    Hi ,
    I need help in , How to pass a java object to xslt file.
    I am using javax.xml.transform.Tranformer class to for the xsl tranformation. I need to pass a java object eg
    Class Employee {
    private String name;
    private int empId;
    public String getName() {
    return this.name;
    public String getEmpId() {
    return this.empId;
    public String setName(String name) {
    this.name = name;
    public String setEmpId(int empId){
    this.empId = empId;
    How can i access this complete object in the xsl file ? is there any way i can pass custom objects to xsl using Transformer class ?

    This is elementary. Did you ask google ? http://www.google.com/search?q=calling+java+from+xsl
    ram.

  • How to create custom attributes & object classes through ldif files in OID

    Hi,
    I have to create 4 attributes and one object class(custom) in OID. I want to creae these attributes and object class through LDIF file.
    I tried creating an attribute through this command
    ldapadd -p 389 -h localhost -D cn=orcladmin -w password -f D:/newattr.ldif
    this ldif file contains inf. for creating a new attributes:
    dn: cn=subschemasubentry
    changetype: add
    add: attributetypes
    attributetypes: ( 1.2.3.4.5.6.10 NAME "xsUserType_new" DESC "User Type Definition" EQUALITY caseIgnoreMatch
    SYNTAX "1.3.6.1.4.1.1466.115.121.1.15" )
    I am getting error: Object class violation
    Failed to find add in mandatory or optional attribute list.
    Please help to find where I am going wrong...
    Thanks.

    Hi Ajay,
    Thank you for the help. Now i am able to create both attributes and object classes in OID through Ldif files.
    I was getting constraint violation error because (I think) I was not giving proper naming convection for attributes and object classes. For OID, there are certain Ldap naming conventions. They are as follows:
    # X below is the enterprise number assigned by IANA
    1.3.6.1.4.1.X.1 - assign to SNMP objects
    1.3.6.1.4.1.X.2 - assign to LDAP objects
    1.3.6.1.4.1.X.2.1 - assign to LDAP syntaxes
    1.3.6.1.4.1.X.2.2 - assign to LDAP matchingrules
    1.3.6.1.4.1.X.2.3 - assign to LDAP attributes
    1.3.6.1.4.1.X.2.4 - assign to LDAP objectclasses
    1.3.6.1.4.1.X.2.5 - assign to LDAP supported features
    1.3.6.1.4.1.X.2.9 - assign to LDAP protocol mechanisms
    1.3.6.1.4.1.X.2.10 - assign to LDAP controls
    1.3.6.1.4.1.X.2.11 - assign to LDAP extended operations
    By using these conventions for attributes and object class, I did got any error and they were created in OID.
    Thanks a zillion.
    Kalpana.

  • How can I save an object Image in a file with .jpg or .gif format?

    Greetings
    I'm programming a Ray Tracer but now I need to know like save an object Image in a file with .jpg or .gif format. Could anyone help me, please? It's very important to me do this as soon as possible. Thanks.

    In 1.4 you have ImageIO available ... javax.imageio.ImageIO.write is the method to call.
    - David

  • How to create a BufferedImage object using a .png file on harddisk

    For some application of JFreeChart I want to create a BufferedImage object from png file on harddisk.
    Can anybody tell me how to achieve this?
    Thanks in advance.

    See [this thread|http://forum.java.sun.com/thread.jspa?threadID=5144115].

  • How can I set the Object Name to the file name on import?

    All-
    I've been manually typing the filename into Aperture's Object Name metadata field. Is there a way to do this automatically? I use metadata presets to fill in many other fields on import but haven't found a way to set metadata fields on a file-by-file basis.
    Perhaps there's a way to do this with the thousands of images already in my library as well...
    Thanks,
    Andreas

    Here's the cleaned-up version:
    tell application "Aperture"
    set selectedImages to the selection
    repeat with i in selectedImages
    set tName to name of i
    set value of IPTC tag "ObjectName" of i to tName
    end repeat
    end tell
    Some other related bits, which you can probably work out how to put into the above script:
    Find out the AppleScript names of the IPTC tags (but only tags which have a value for that image), the names will be listed in the 'result' pane in the Script Editor:
    tell application "Aperture"
    set selectedImages to the selection
    get name of every IPTC tag of item 1 of selectedImages
    end tell
    The same for EXIF tags:
    tell application "Aperture"
    set selectedImages to the selection
    get name of every EXIF tag of item 1 of selectedImages
    end tell
    And for any custom tags you have set up. If you haven't set up any custom tags (one of my main reasons for going with Aperture) this will just return camera and picture time zones:
    tell application "Aperture"
    set selectedImages to the selection
    get name of every custom tag of item 1 of selectedImages
    end tell
    Finally, keywords:
    tell application "Aperture"
    set selectedImages to the selection
    get name of keywords of item 1 of selectedImages
    end tell
    To grab the first keyword name try 'name of keyword 1 of...' etc.
    To grab the parent keywords for hierarchical keywording stuff try experimenting with 'get parents of keywords of'. The keywords seem to be read-only from AppleScript, so a magic script that added all parent keywords doesn't seem to be possible.
    Ian

  • How do I fix the workspace error "because the file is locked, you do not have necessary access permissions..."?

    I keep getting the error message "Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. ..." when I try to open a workspace. Any ideas how to fix the permissions and what file does not have permissions. I am on a Mac.

    See here:
    CS5 "Locked"

  • How can I fix a problem ? that a file is missing on my itunes , and it is preventing me from upgrade  my version of i tunes

    I really need help!!  A file is missing from my itunes  and now I can't upgrade my Itunes from the older version i got
    do not know  how to fix it, is there anyone who can help?

    what does the message say word for word on the screen?

Maybe you are looking for