How do I fix my date and time on my iPod touch3g

I been using my ipod atleast a year i shut it off for a month and after a month i've turned it back on and all of the sudden my ipod date has changed to 2512 BE. I've been trying to fix it for exactly 2 days. I have tried going to settings>General>Date&Time>Set date&time . When i would try to reset my date, as in scroll all the way to 2011, it would scroll the screen all the way back to the date it was perviously on. I've went to Settings>General>Date&Time>TimeZone and set the time zone correctly but that still has not done any effect to my year, 2512 BE. My last two final questions are, Is there anything else i can do to fix my ipod? If there isn't anything I can do would it be better to just Restore it to manufacturing settings?

Try going to Settings>General>International ensure that the Gregorian calender is specified.

Similar Messages

How can I print the date and time in a photo from iPhoto

How can I print the date and time in a photo from iPhoto

You want to print them on their own? Can't be done. WIth the photo? Install this
http://www.iborderfx.com/iborderfx/

How do I remove a date and time mark on a stored photo so I can put it into a calendar

How do I remove a date and time mark on a stored photo so I can put it into a calendar.....?

In Iphoto, yes. You can use PhotoShop Elements or some other editor. You can also crop. (You might be able to make the retouch brush smaller.)

How do I find the date and time stamp on pictures?

How do I find the date and time stamp for my pictures?

The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
There may be other photo apps that provide this information as well.
PhotoForge2 will show the EXIF data as well as the GPS data if it is available.

How can I copy the date and time in Mail header?

How can I copy the date and time in Mail header?
I can copy everything else in the header for pasting in another application.
But not the date and time which is absolutely vital.
It was ok in 10.6

I suppose you could copy it from the Raw Source. View>Message>Raw Source

How can I get the date and time and display it on the report main page?

Gurus,
How can I get the date and time and display it on the report main page?
Thanks!

Hello,
You can create a Formula Colum returning a date :
function CF_1Formula return Date is
begin
RETURN(SYSDATE);
end;
Put a Field in the Layout having this formula column as source .
Regards

HOW DO I ACCESS PICTURE DATE AND TIME?

HOW DO I ACCESS PICTURE DATE AND TIME ON A IPHONE 4?

There may be a 3rd party app that provides for this. Apple's iPhoto iOS app provides this data.

HT2305 how can I correct my date and time on my 3G?

How can I correct my date and time on my 3G? Thanks in advance!

Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try.

How to enter a new Date and Time each day in a Numbers Spreadsheet...

Hi... I have finally decided to move away from Excel and really give Numbers a shot... I have an application where each day I first enter the current date and time into a particular cell of a new row and then I enter some data in cells adjacent (in the same row) as that entered date-time. Then the next day I want to again enter the (new) current date and time and add more data next to that new date-time and so forth day after day... You can't use something as simple as =NOW() because then everyday, ALL of the date-times would change to the current time... Nope, now what I want... I just want to be able to EASILY and QUICKLY enter the current date-time value in one call and then have that specific value stay there forever... In Excel, this is accomplished with the keyboard shortcuts of
<cntl> followed by a semicolon (;) for the date
then enter a single space (for separation of date versus time) followed last by
<command> followed again by a semicolon...
So all together that is,
<cntl><;><sp><command><;>
and that puts something like
4/10/2010 9:49:00 AM
in a single cell...
That's what I now want to be able to do in Numbers...
How do I do that??? Do I use the menubar item "Insert Date and Time" and if so, how exactly do I get the current time to show up in the chosen cell??? With formatting??? Is there a keyboard shortcut method like the one I mentioned that works for Excel?? I've perused the manual and though I found lots on date-time, I didn't see how to do specifically what I want to do... I likely just missed it as surely it must be easy to do...
Any feedback would be much appreciated... thanks... bob...

Badunit wrote:
The result of running that script is "UI Enabled = TRUE".
I have cells named by the header values.
This may be the problem.
The script is an old one which deciphered only the letter+digit cell references.
Here is a new version which works with every kind of cell reference.
--[SCRIPT insertDateTime]
Enregistrer le script en tant que Script : insertDateTime.scpt
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Placez le curseur dans la cellule qui doit recevoir la date_heure
menu Scripts > Numbers > insertDateTime
La cellule pointée reçoit la date_heure.
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script : insertDateTime.scpt
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Put the cursor in the cell which must receive the date_time.
menu Scripts > Numbers > insertDateTime
The pointed cell receives the current date_time.
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Yvan KOENIG (VALLAURIS, France)
2009/03/01
2010/04/11 is now able to treat every kind of cell references
property theApp : "Numbers"
--=====
on run
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
my doYourDuty(colNum1, rowNum1, tName, sName, dName)
end run
--=====
on doYourDuty(c, r, t, s, d) (*
c = columnIndex
r = rowIndex
t = table's name
s = sheet's name
d = document's name *)
local cdt
set cdt to my cleanThisDate(current date) (* the new date_time as a clean date_time *)
tell application "Numbers" to tell document d to tell sheet s to tell table t
set value of cell r of column c to cdt as text
end tell -- application …
end doYourDuty
--=====
on cleanThisDate(dt)
(* ugly code but once I got date_time with milliseconds so if necessary, I drop them *)
local l
set l to my decoupe(dt as text, ":")
if (count of l) > 3 then set dt to date (my recolle(items 1 thru 3 of l, ":"))
return dt
end cleanThisDate
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
It's available on my idisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:for_Numbers09:insertDateTime.zip
Yvan KOENIG (VALLAURIS, France) dimanche 11 avril 2010 14:16:41

How can I put current date and time in Photo Info (Print module)?

I often use the Photo Info option in the Print Module to caption my proofs with File Number plus the date and time the print is made. This allows me to match up the print to the History state for the image, so I know which print version I'm looking at. I've always wanted to get Lightroom to automatically enter the date and time the print is made. It obviously knows this info, since it stamps the History state with date and time. Currently I have to modify my caption manually with Custom text each time I make a print. This is a major PITA. Has anyone figured out how to get Lightroom to do this?

There is a Date/Time title in the titles browser, does just what it says...

How to detect the iPhone Date and Time

Hi guys,
I am new this plateform and I am working on an iPhone application in Objective-C. I need to detect the date and time of iphone clock in the objective-c.
Please let me know if anybody knows how can I do it.
Thanks,
Ranjit Singh

Ranjit,
Be sure to consult the docs for the iPhone SDK. If you are running the simulator, you probably have access to frameworks and classes not available on the phone itself. The iPhone docs don't show NSCalendarDate as a valid class for iPhone (but it exists for MacOS). I think you'll need to use NSCalendar if you wish to have it run on the device (and not just the simulator).
Do you have a device you are testing on? It would be good to verify this (I don't and therefore must use the simulator).
Cheers,
George

How to get the client date and time ?

Dear Sirs...
Using jdeveloper 10.1.2.0
How can i get the client date and time using the HttpServletRequest ?
thanks for any help in advance
best regards

If your code is running on the client pc you can just create a new instance of the java.util.Date class. That class automatically defaults to the current time of the client machine. Otherwise if you're running the code on the server, you could insert/post the client date/time by adding its string representation as a parameter to the HTTP request object.
Ronald

How to set the system date and time in LabVIEW 6i?

Hi,
How can I set the time of the computer from Labview 6i? Is there any function to do this?
Thanks.

Arnau wrote in message news:<[email protected]>...
> Hi,
>
> How can I set the time of the computer from Labview 6i? Is there any
> function to do this?
>
> Thanks.
Not natively that I know of. You could use a LabVIEW DLL call to link
to a Win32 API call which sets the date and time. You would need to
have privileges to do it.
Doug D.
[email protected]

How do you change the date and time

how do i changethe time and the date on hp photosmart plus B210 all in one series

In most printers you go to the setup icon on the display, and then to either tools or preferences. In one of those menus there will be an option to adjust the date and time.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

How can I display the date and time from the playhead info as a subtitle ?

Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead information so that it automatically gets created during rendering.
In case you are wondering why on earth anyone would want this, I would like to use this for display on multisport racing videos.
Thanks

There is a Date/Time title in the titles browser, does just what it says...

How do I fix my date and time on my iPod touch3g

Similar Messages

Maybe you are looking for