How do I Place Two Or More Template Regions Side by Side?

How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
Maybe I need to know how to place two or more template regions side by side?
Can you insert a template into a table?
How do you insert a template within the main template along side a region within the main template?
Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
Thank you in advance for any help that you can offer me.

How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
Template regions are not layout regions.  They do not add any structure to your page, and only provide a way to add content to whatever HTML structure contains the template region.  So - you need to make your Template's HTML provide the space.
For example, you could have a three column, one row table with an editable region in the left/right cell.  The exact answer, though, will depend on your page's layout and where you want the editable regions to be placed within that layout.
In addition, you say "place two templates side by side" as if the regions were the templates.  That's not correct.  There is a template file, which contains editable regions.  Thus, you could not place two templates side by side.
Can you insert a template into a table? 
See the answer above.  You can place an editable region inside a table.
Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
I bellieve you are very confused about what templates are and how to use them, and so I strongly suggest you read DW's F1 Help about templates before going further with this project.

Similar Messages

  • How can I place two fields from one column side by side?

    Hello experts,
       I need your help: I have a column which has two different fields. One is Sales, the second is Sales Todate.
    My boss want me to get the difference btn them as well as the percentage. Now, here is my challenge: I can easily filter them but I want them to be side by side; but when I filter one appear on top of the other like below
    Sales                           
    Sales
    Sales
    Sales
    Sales
    SalesTodate
    SalesTodate
    SalesTodate
    SalesTodate
    SalesTodate
    However, I want them appearing like below:    that way, I can place the difference column beside them.
    Sales
    SalesTodate
    Sales
    SalesTodate
    Sales
    SalesTodate
    Sales
    SalesTodate
    Sales
    SalesTodate
    Any help will be appreciated..  I have tried a case statement, still the problem persist
    Chuck
    On the side: Does anyone know how to place the question in such a way when one answers I can mark correct or helpful, I am still not able to.. I hate it, when I place a question I go through create then discussion, is that the right way?

    Hi
    Just drag the column to measure label area in pivot table @ columns.
    So the table has to drag and drop to column area on the top so it will get display like
    Sales     SaleToDate
    And the measure label to row side drag and drop it
    sales      saletodate
    values     values
    Regards,
    VG

  • How do you combine two or more movie clips into one movie clip in iMovie '09

    how do you combine two or more movie clips into one movie clip in iMovie '09

    First create an iMovie project. Then drag the clips (or portions of clips) that you need into the project.
    When finished, use the SHARE menu to share the project.

  • How can I copy file/folders from and to hard drives? How can I have two or more windows of explorer so that I can drag and drop from one hard drive to another?

    Hi,
    I am a new customer (purchased last week) of MacBookPro (latest) and its my first ever Apple laptop.
    I am almost lost to find the operating tools.
    1. How can I copy files from hard drive to computer and vis-a-versa?
    2. Only can browse one but how can I have two or more browses at the same time like in MS windows?
    3. No right click works on track pad?
    4. Is there application/ program compatible to MS office? If so how much and how can I purchase?
    5. Is there AutoCAD program that is compatible to MS Window AutoCAD? and if yes how much and how can I purchase?
    I will very much appreciate if you could email me the with the solution/answers please.
    Regards,
    Khagendra Limbu

    1) For some reason this happens once in a while with FAT32 enabled external harddrives. I have no idea why this happens but it most easily solved by reformatting the drive. First make sure you've copied everything from the external drive to your internal harddrive. You've done this earlier so I assume you know how to do this.
    Now the reformatting part. Open Finder and go to Applications. Look for the folder called "Utilities". Click on it. In it you find a program called "Disk Utility". Click on it. Now look for the external drive. You probably see two entries for the disk. Click on the one that contains the name of the drive NOT the one that describes the disk (Like for example 320.07 GB Samsung S2 Portable Media).
    Now you see four tabs in the righthand part of the window. They're called "First Aid", "Erase", "RAID" and "Restore". Click on "Erase". This opens the tab with (amongst others) a dropdownbox (Format) and a textbox (Name) . In the dropdownbox select "Mac OS Extended (Journaled). Take note! This selection disables usage of the drive with Windows PC's. If your goal is to share the drive with Windows PC's select the MS-DOS FAT option.
    Enter a label for the drive in the textbox Name. Now click on the button "Erase". This will format the drive.
    Now when it's done you can copy back all the items you've copied to your internal harddrive earlier.
    2) Opening two windows like Explorer on Windows is opening two Finder windows on the Mac. Simply click on the background. In the menubar you items like 'Finder", "File", "Edit", "View", et cetera. Click on "File" and "New Finder Window". Do this two times. Alternatively you can click on the background and press CMD-N two times.
    3) You can right click on the trackpad. This however depends on if you've enabled the feature in System Preferences. In the topmenubar click on the Apple icon and select "System Preferences". Now look for Trackpad in Hardware. Click on it. You see three tabs with the names "Point & Click", "Scroll & Zoom" and "More Gestures". Select "Point & Click" and look for "Secondary Click'. Make sure it is checked and make sure it has written "Click or tap with two fingers" written beneath "Secondary Click". When you're done exit System Preferences. Now select the background and tap with two fingers on the trackpad. This should open the contextuel menu with options like "New Folder", "Get Info" et cetera.

  • How do I combine two or more pictures into one?

    How do I combine two or more pictures into one?

    I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else.  I wanted to put several photos from a file onto a new blank image.  This is what I did.
    1.  Create a blank page.    File/New/ Blank File.   Put in the size.  I used 8x10.
    2.  Bring the photo  you want to use into Elements as you always do. It will list along the top next to the blank sheet.
    3.  Choose SELECT (top of screen)/ Select All.
    4.  Choose Edit/Copy   or Command "C"
    5.  Click on the Blank File.   Chose Edit/Paste  or Command "V"
    6.  Click on Image/ Transform or Command "T".  There should be a dotted line around your pasted image.  You can then move and adjust the image to how you want it.  When finished, press the check-mark on lower right of photo.
    7.   Repeat this with all the photos you want on the new blank file.
    8.  You will see on lower right of Elements,  the background layer and as many layers as you have photos.  These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible.  This will merge all layers to the background.
    9.  Save as and you are done.

  • Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

    Can/ how do I link two or more "projects" - not events or clips - "projects" together in final cut pro 10?

    Thanks Tom -
    I created two "sequences". They are currently listed individually in the "project library". Now I want to take sequence "B" and attatch it in it's entirety to the end of sequence "A" - forming one long sequence.
    I have tried to drag sequence "B" and drop it into "A's" timeline. I have tried to creat a compound clip. I'm either missing something - or - you can create a compound "clip" or a compound "event" - but perhaps you cannot link to "projects" together.
    Does this help descibe my problem?
    Thanks again.

  • How do I place two graphics side by side.

    We are using a one column with a side head. (Not that that should matter I guess.) How would I place two graphics side by side, still numbering the figures correctly. We have tried several things and finallly got them even, but it is a big hassel and then the paragraph style (Figure XX) doesn't always line up either. When I use the text frame tool to number the Figures, the numbering doesn't continue as it should. Seems that sometimes it works, but sometimes it doesn't.
    Thanks,
    ls

    If it was me, I'd set up a two-column, two-row table and set the ruling to none.
    Import the graphic into cell 1/1 so that an anchored frame is created automatically.
    Shrink-wrap the graphic. Repeat for cell 2/1.
    Then I'd put the Figure caption tag into the second row of cells, under the graphics.
    *Ordinarily, you wouldn't use the text frame tool for stuff like this, nor the Text Line tool, which is what you may be using.
    If stuff isn't set up properly, it creates a text flow that's separate from your main text flow, which means the auto-numbering counters are in two separate flows -- the reason they're not incrementing for you.
    Art

  • How to avoid that two or more people alter the same Sales Order same time

    I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
    If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
    So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
    To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution.
    I've already put this thread in the Business One forum and someone suggested to put it in the Business One SDK forum, as there isn't a solution in Business One itself.
    So if someone can give me a direction for a solution I would be very pleased.
    Best regards,
    Tim

    Hi Tim,
    The only thing that comes close to what you want in standard SBO is Data Ownership. However, this can't stop someone editing a document that is already being edited.
    You can't use stored procedures to track which document is open because the SBO_SP_TransactionNotification proc (which is the only one that you are able to customise) is triggered when a document is updated or added (or cancelled or closed) and not when the document is actually being edited in the user-interface.
    You could do this by writing an addon that uses the UI API to trap events in the sales order form. In theory, a sales order is being edited if the sales order form is in Update mode (ie in order for the form to be in Update mode, the user must have selected an existing document and changed the value of at least one field). You can trap the event of the user changing a value and then log the user and document in a table. When other users try to edit the same document, you could check the table and then prevent them changing values. When the first user clicks on the update button (or cancels the update or closes the form etc etc) you can remove the lock on the document. However, I have doubts as to how robust it would be. The problem with this kind of locking solution is that you sometimes get 'stranded' locks (eg user was editing a document when their workstation crashed) and the solution can end up being more troublesome than it is worth.
    Kind Regards,
    Owen

  • How to avoid that two or more people altering the same Sales Order

    I'm looking for a way to avoid that two or more people altering the same Sales Order at the same time.
    If someone has entered a Sales Order in the system and something needs to be adjust it can be done by two or more people at the same time. The problem is that when someone is saving these changes, the changes of another person, who is still working on the same order, get lost.
    So what we need is an alert that someone is already using this order and that no other person can make any changes at that time. So the order needs to be blocked for altering for any other person at that time.
    To avoid this I think you have to do something with the Stored Procedure. Or has someone a more simple and better solution. So far I didn't find a standard option in Business One neither a solution in this forum.
    Best regards,
    Tim

    Tim,
    There is nothing in the application settings in Business One that could be used to prevent this.  You may post this to the SDK forum as well and perhaps there is a way to achieve this through SDK.

  • How to compare between two versions of template project???

    Dear All,
    We are doing some cleanup activity in our solution manager system. For this actually we have created the replica of this project from production system to a sandbox system. We can do the cleanup of this project and can transport this new project to our production system and can move on.
    But the pbm we are facing now is, how do we bring in the data captured or added to the production system after we have copied it to the sandbox system?
    Can anybody throw in some light into this issue?
    We tried the option of creating different version for the template and using the sa_project_upgrade transaction to compare between two versions of the template using "Current Version in Project" option. Not sure whether this will work out.
    {{We thought that if we try in this way, we can find the difference between the two versions of the template project, and from there, might be we can bring in the new changes into our new project manually. We do agree that this is not the right approach.}}
    But the end result we got was like we got the information regarding where all there is the difference between the current version in the template project to that of the original(in our case it checked against BPR as we selected the scenarios from BPR for this template). But what we expected was a difference between two versions of the template.
    Pls help. Pls make a try to help. Any thoughts in this direction will help us to move forward.
    Any info will be suitably rewarded.
    best regards,
    Krishna.

    Hi Andreas,
    Thanks a lot for your immediate reply.
    I too had that doubt that my appraoch will not work. But wanted to get confirmation that it will not work. Also wanted to know about any other approach. Thank you for providing me with some alternative approach.
    I tried the option suggested by you. But while running the comparison report for the newly copied project with the option "New Version of Original", I am getting the below error. I do agree that this approach should work. But for some reason I am getting the below error. Can you pls look into the same and help me out.
    Internal error
    Message no. AI_COMPARE006
    Diagnosis
    An unexpected error has occurred in:
               program CL_SA_PROJECT_UPGRADE_ONLINE==CP
               include CL_SA_PROJECT_UPGRADE_ONLINE==CM002
               line                                                  102
    Procedure
    Restart the transaction. If the problem persists, check if a SAP note is existing for this problem. If not please send a message to the SAP hotline.
    Thanks a lot in advance.
    best regards,
    Krishna.

  • How do I place two independent voices in one staff?

    The header says it all: I have two voices in one staff, how do I get Logic to tell them apart?

    Found it out myself: create two different voices in the staff style, assign different midi channels to them, and assign the different midi channels to the notes in the event editor.

  • How do I place two items on one line?

    I created a form and I attempted to place these two text boxes on the same line but got this:
    Is there any way that I can get those two items on the same line to look somewhat like this?...
    PLEASE HELP ASAP!
    THANKS

    Yes, you should be able to click & drag the second field next to the first.

  • How do you combine two or more different toolbars?

    There is wasted space on multiple toolbars that could be utilized better by moving one tool bar's items up to the empty space above. IE Norton's tool bar has 3 / 4 items on it. The Firefox tool bar above has 3 items on it: Most Visited, Getting Started and Firefox Updated with 2/3's of the bar as empty space.
    Even the menu toolbar has over half of the toolbar as empty wasted space.
    How do you do that? Thanks

    You can (temporarily) hide unneeded toolbars via "View > Toolbars"
    The bar with Most Visited and Getting Started is the Bookmarks Toolbar and if you open "View > Toolbars > Customize" then you can drag the "Bookmarks Toolbar items" item onto another toolbar (e.g. Menu bar) and hide that now empty Bookmarks toolbar.<br />
    Toolbars added by an extension can only be merged onto another toolbar if that extension supports that feature and most extensions do not.

  • How can I rotate two or more photos at the same time

    That´s what I do: I select various images and then apply a rotation, but only image rotates.
    I have tried too applying it to one image and "lift and stamp" to the rest,but this doesn´t work.
    Please, how can I do it?

    You have got a good answer from Claire, but if you are using a keyboard with a standard Spanish layout, you have to use SHIFT + [ to rotate to the right.
    You can also use ´ and ` (to the right of the letter P) to rotate the image. This is the location of the [ and ] on the US layout.
    If you use a Spanish ISO Layout on your keyboard, then you have to use ´ or ` since the [ is replaced by the º in the layout.
    You can also use the buttons for rotation in the Control Bar at the bottom of the window
    Regards
    paul k
      Mac OS X (10.4.8)  

  • How do I combine two or more CDs into one album?

    How do I combine multiple CDs, like box sets, into one album in iTunes?

    See also Grouping tracks into albums.
    tt2

Maybe you are looking for