How do i reinstall my Microsoft Office 2010 preloaded form recover disk g42 laptop

i recover from factory setting but i first made back-up disk of all on my laptop

Hi,
How did you do the backup for your HDD ? You have to use THAT software to restore it back. Restoring back to factory settings does NOT restore Microsoft Office 2010.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How reinstall Microsoft Office 2010 Preloaded in a G460 (Brazilian Portuguese Version)

Hi for everybody
I have a serious question that I would like someone help me
I act as Lenovo support and we have a case of an equipment LENOVO G460, SN RBxxxxxxxx it was repaired but since then we are not able to locate the software MICROSOFT OFFICE 2010 preloaded in Brazilian Portuguese version for their resettlement in the same, since this failed to be installed during maintenance.
We try to locate him at all Lenovo Support Sites, but without success. The seven-digit code for the equipment is 0677-24P. How can we reinstall it? There are some own Lenovo's Site where we can find this software?
Thanks for support
Regards
Moderator Note; s/n edited for system owner's protection
Solved!
Go to Solution.

the pre-installed office application is/was trial version, you can use it only 60 days if you don't have serial number.
check under your computer for ms office license sticker. ( if you don't, you need to buy a copy of office )

How to reinstall Microsoft Office 2010 for T430?

I currently am doing IT work for a remote co-worker and he said that his T430 only came with Lenovo Recovery discs and that he doesn't have any standalone Microsoft Office discs. Is there a download for the Microsoft Office Home and Business 2010 version that he's using that I can download to his machine, so I don't have to use the recovery discs for a factory reset?
I tried going to Microsoft's site to get the 2010 version, but when I entered his key, it said that there's no download available for the OEM version of Office 2010.
Solved!
Go to Solution.

Hi dikt, welcome to the forums,
which MS site are you trying to download from and did your co-worker create an MS account at some point?
I am able to download Office 2010 from the following site and on logging into my account I can also see my different oem license numbers. If I remember correctly after entering the license key, if you don't have an account, you need to create an account.
http://office.microsoft.com/en-us/products/microsoft-office-2010-backup-FX101853122.aspx
Hope this helps
edit; for clarity
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

How do I use microsoft office 2010 on imac?

Hi, I would like to use microsoft office 2010 on my imac for school purposes, how can I accomplish that?

I suggest that you get the student version of 2011 for mac. i believe it is around 120us or so on amazon or the apple store. The other option would be to use 2010 for windows running paralles or a similar Windows emulator.
Cheers

I had iCloud on my Microsoft Office 2010 and tried to increase the font size - I read to unistall and reinstall, so I did. This took iCloud away from Calendars and Contacts. I re-installed iCloud and it will not sync with my Calendars

I had iCloud installed, and it was working, then I wanted to increase font size in the notes section of Calendar. I read to uninstall iCloud and reinstall iCloud and it would be fixed.
Once I reinstalled iCloud it did not show up in Microsoft Office 2010 - Calendar or Contacts.........which it had previous to the uninstall.
When I sync it errors. I am at my wits end trying to sync this, and it just keeps erroring. I am not syncing phots/photo stream, just contacts and calendar.
Please can anyone tell me what setting I have to change??

Needed to add some clarification here:
iCloud shows me as signed in, but Calendars are NOT checked
Internet Accounts shows Calendars as syncing

ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

Welcome to the Apple community.
Unfortunately Office for Mac does not support the correct protocols to work with iCloud.

I am trying to install microsoft office 2010 but it is telling me to proceed I have to remove Safari + Firefox. Is this necessary and ifso how do I do this?

I am trying to install microsoft office 2010 but it is telling me, to proceed I have to remove Safari , Firefox , is this necessary and ifso what do I need to do + how ????

It means you have to close them (Quit). Right click them one by one from the dock and click Quit.

I created a spreadsheet using Microsoft office 2010 Excel. When I open the sheet using Numbers, the formatting changes. How do I fix this?

I created a spreadsheet using Microsoft office 2010 Excel. When I open the sheet using Numbers, the formatting changes. How do I fix this?

If you plan to share or work with people who regulary use MS Excel you should not try to use this in Numbers. You will have constant problems with how each program translates the formatting.
If you want to use Numbers, use it exclusively. If it is for your job use the tool your company uses.

Unable to find my Microsoft Office 2010 to use as a default program to open documents. How to...

I want to use my Microsoft Office 2010 program as the default program to open document. When I browse for the program a follow the path, I end up without a program to select. Where do I find the correct path to be able to choose it as the default program?

blackfoot wrote:
My old computer had microsoft word, office , etc. . How do I find it on my new computer or how do I go about getting it?
Microsoft Office is not a free program, you have to purchase it.
Some new PCs may have Office as a free trial, but when the trial is over, you will need to purchase it.

How do I resolve a confict between Acrobat X Pro and Microsoft Office 2010 running on a W7 Pro 32bit

After I use Acrobat X Pro, and particularly if I have Acrobat X Pro running, the Microsoft Office 2010 programs (Outlook, Excel and Word) become very unstable.
Outlook has a real tendency to crash when I try to add a file attachment to an email.
Word gets mad while trying to find files across a local network.
and Excel almost always crashed while shutting down (the Excel program).
The problem is getting worse (more frequent crashes) as time goes by.
I am not "pointing the finger" at any specific software. I'm just looking for some things to try to resolve my problem with my setup.
If this is the wrong forum for this question I humbly beg your forgiveness (providing you give me a suggestion as to where I should go for help).
Jim

I'm having the exact issues, I guess adobe does not monitor these forum and assist their customers.

How to find product key for Microsoft Office 2010?

I purchased an HP Pavilion dv6 a couple of years ago. At the time of purchase I also ordered a license for Microsoft Office 2010. The laptop came with Office already installed, and everything worked great for years.
Earlier this week I had to do a full system restore to get my laptop back in working order. I backed up all of my user files, found installers or original installation media for all of my software except for Office, and proceeded with the system restore.
I just got everything running again this morning. The system restore put a clean copy of the OS on my laptop, but Microsoft Office is gone. I've just about finished re-installing all of the other software, but I need some help with Office.
Since my laptop didn't come with installation media for Microsoft Office 2010 I'm trying to donwload it from here:
https://www2.downloadoffice2010.microsoft.com/usa/registerkey.aspx?culture=en-US&ref=pkc
It asks for a product key for Office 2010 in order to start the download. The product key for Microsoft Windows is on the bottom of my computer, but I can't find a product key for Office. (Before anyone asks, yes, this is the full version of Office 2010, and yes, I paid for it at the time of purchase of the laptop.) I kept all of the paperwork that came with the computer, but I can't find the Office product key anywhere in that packet. Is there somewhere else I should be looking for my product key?
Better yet, does HP still have a copy of my original purchase order for this laptop, and do they store product keys for the products they sell?
Thanks,
Tom

Neither HP nor Microsoft keep a record of the key that was issued. If you cannot find it in your documentation or emails I'm afraid you are out of luck and would have to purchase another key.
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Is it possible to Install the 64-bit Microsoft Access Database Engine 2010 if we are running Microsoft Office 2010 32-bit?

So we are running Microsoft Office Professional Plus 2010, Version 14.0.7015.1000
(32-bit)
This is what is installed via our Network and Network licensing.
I am trying, in vain, to read and write a .xlsx file via a C# Edit Script in a SSIS Package. And I have tried using...
string StringConnection = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 12.0;HDR=Yes;IMEX=1\"";
And this tells me that this has not been installed. So when I go and try and get the Microsoft Access Database Engine 2010 64-bit, which would allow me to use Microsoft.ACE.OLEDB.12.0 and allow me to read, write, and process this .xlsx file, it tells me
I cannot install it because I already have 32-bit installed and it wants me to un-install Microsoft Office 2010. Why? Because it is 32-bit? And I can't do that because this is what we have and what we're licensed for and from what I've read seems to be the
industry standard because most software vendors are ill equipped to process 64-bit right now.
So my question is this...How can I use a C# Edit Script to read and process a .xlsx file? Because if I try using...
string StringConnection = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + sourceFile + ";Extended Properties=\"Excel 8.0;HDR=Yes;IMEX=1\"";
It then tells me that the file is not in that format.
Please excuse me for asking this question in a couple of different ways out here but I cannot for the life of me seem to be able to get an answer as to how I can process a .xlsx file with a C# script and which driver to use that will make this work.
Thanks for your review and am hopeful for a reply.
ITBobbyP85

Hi ITBobby85,
If the excel version in the Connection Manager is Microsoft Excel 2010 (.xlsx), we should use Microsoft.ACE.OLEDB provider.
We can't install 32bit and 64bit parts of office on the same machine. We will get an error as you said when we run the installer to install the 64bit version of the Microsoft Access Database Engine 2010 Redistributable in the machine where a 32bit version
of Microsoft Office installed. To fix this issue, please download and install the 32bit version of the Microsoft Access Database Engine 2010 Redistributable with the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Compatible smart view version 11.1.2.1 with microsoft office 2010 x64

Hello,
My name's Antonio Marcos and i'm trying install smart view version 11.1.2.1 in version x64 the microsoft office 2010.
The documentation, says its compatible, but when installing an error occurs.
Anyone know how to solve this problem?

I'm confused. There's an Oracle Proactive Support blog entry that says it came in with .300:
https://blogs.oracle.com/proactivesupportEPM/entry/smartview_11_1_2_2
Even Matt Milella 'sorta' says it, here: SmartView 11.1.2.1 x64 compatibility with Microsoft Office 2010 x64
But then the latest New Features (http://docs.oracle.com/cd/E38438_01/epm.111223/sv_new_features/sv_new_features.html#sv_new_features_361) definitely lumps it into the 11.1.2.2 (no dot) bundle. And John Goodwin says it. So I apologize if I'm giving out bad information.
But this doesn't help the OP, who is on 11.1.2.1. :)

Is it possible to activate Microsoft Office 2010 with the answer file?

Hello
I'm not sure if this is possible but I have a volume product Key for Microsoft Office 2010 and I am currently working on an image that would activate Office 2010. Is that possible and how would I put that in the answer file? Everything I see on product key
activation just goes to activating for Operating systems on the image. Any help would be much appreciated.

Yes, it's completely possible, but there are some specific steps you must perform, to avoid issues in the deployed computers.
This is because the Windows sysprep providers don't include a provider for Office (which means that Office doesn't get generalized by sysprep).
You must also take care *not* to execute any Office applications/components *after* running ospprearm.exe (because that will cause the Office components to indivuate, which un-does the effects of ospprearm.exe)
http://technet.microsoft.com/en-us/library/cc178964(v=office.14).aspx
Preparing the reference computer
To prepare the reference computer for imaging, follow these steps:
•Install Windows 7 Enterprise Volume Licensed version from DVD media.
•Enable the local Administrator account.
•Delete the temporary user account and profile.
•Install Office Professional Plus 2010 from the network installation point.
•Rearm the Office Professional Plus 2010 installation.
•Generalize the installation.
Also, some people find it useful to insert a specific Office activation command as a last step in the deployment. This is because Office setup will by itself only attempt automatic activation one time and will not retry. This can lead to unactivated installations,
warnings to the user, and helpdesk calls to you.e.g.:
'cscript.exe "c:\Program Files\Microsoft Office\Office14\ospp.vbs" /act'
This is not really an issue if you are using KMS, it's more of an issue when using MAK.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Just upgraded to Lion, how can i use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Just upgraded to Lion, how can I use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.

Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
This handy site can advise you what software doesn't work with the Lion.
http://roaringapps.com/apps:table

How do i reinstall my Microsoft Office 2010 preloaded form recover disk g42 laptop

Similar Messages

Maybe you are looking for