How do I SET a Field value to current datetimestamp in an UPDATE
The following is my UPDATE SQL. FIELD10 is defined as TIMESTAMP(6) and I want to update the value to the current system TIMESTAMP for each record with FIELD01 = "PENDING". I have tried several different date formats but nothing is working. What is the correct way to update FIELD10 to the current system datetimestamp.
The following does not work, what is the correct SQL script.
UPDATE DB01.TABLE1 SET FIELD10 = SYSTIMESTAMP WHERE FIELD01 = "PENDING"
So far all the variations of defining the current date and time in FIELD10 gives me the following error.
Error starting at line 1 in command:
UPDATE DB01.TABLE1
SET FIELD10=SYSTIMESTAMP
WHERE FIELD01='PENDING'
Error at Command Line:2 Column:4
Error report:
SQL Error: ORA-00904: "FIELD10": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Edited by: user12555026 on Feb 3, 2010 6:33 AM
Edited by: user12555026 on Feb 3, 2010 6:34 AM
Edited by: user12555026 on Feb 3, 2010 6:35 AM
Hi,
user12555026 wrote:
The following is my UPDATE SQL. FIELD10 is defined as TIMESTAMP(6) and I want to update the value to the current system TIMESTAMP for each record with FIELD01 = "PENDING". I have tried several different date formats but nothing is working. What is the correct way to update FIELD10 to the current system datetimestamp.Post CREATE TABLE and INSERT statements for the table. (1 or 2 rows is probably enough).
The following does not work, what is the correct SQL script.
UPDATE DB01.TABLE1 SET FIELD10 = SYSTIMESTAMP WHERE FIELD01 = "PENDING"If 'PENDING' is the value that may be in field01, then it should be in single-quotes, not double-quotes.
So far all the variations of defining the current date and time in FIELD10 gives me the following error.
Error starting at line 1 in command:
UPDATE DB01.TABLE1
SET FIELD10=SYSTIMESTAMP
WHERE FIELD01='PENDING'
Error at Command Line:2 Column:4
Error report:
SQL Error: ORA-00904: "FIELD10": invalid identifierApparantly, there's no columns called field10 in that table. Are you user db01? Are the column names all upper-case? This is why you have to post the CREATE TABLE statement.
Similar Messages
-
How to get-set Hidden field value from JSP ?
Hii,
I am quite newbie about jsp and looking for some help..
I have several url links on my jsp page.
I when I click one of them, I want to reload my page with new request parameter(s) but also keep the older one(s) in hidden field(s)...
but I dont know how to set and get hidden field value "syntax" and I am not sure about where/when should I do this... at first I though that I can do it in "onClick" property of url..
Thanks..Hy,
I have a problem just like that. I am trying to send the value of an subdomain is to another page to be able to modify an entry.
So in listsubdomains.jsp I have
<input type = "hidden" name = "subdomainid" value="<%=subdomains.SubdomainID%>"><%=subdomains[i].SubdomainID%>.
This shouls send the id of the subdomain.
I an sending this to modifysubdomain.jsp with <form name = "listsubdomains" method = "post" action = "modifysubdomain.jsp">
and there I retrieve the value like this:
Integer id = new Integer (request.getParameter("subdomainid"));
out.println(request.getParameter("subdomainid"));
My problem is that no matter what is the value I chose to modify it always sends the first value. If I another value manually it works, but just then.
Please give me some ideas. -
How do I set a NULL value for the parameter field
Hi
I've another question. I'm going to set single values for parameter fields.
// e.g. set today for StartDate parameter field
fc.setCurrentValue("", "StartDate", new Date());
It should be possible to set a NULL value for date parameter fields.
fc.setCurrentValue("", "StartDate", (Date)null);
But this do not work. How do I set a NULL value correctly?
Thank you in advance.
Best regards,
ThomasFirst question - is it a stored procedure parameter?
You can't set a regular parameter field value to a null value.
There was an issue with old version of the JRC, where it was allowing null to go through, but had unexpected behavior at times.
Sincerely,
Ted Ueda -
How do I set ical default values in lion?
I have just upgraded to Lion and so far, so good. In the new iCal, how do I set the default values? In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day. The new version defaults to an all-day meeting. I like the old way better, or best would be to have it as a preference.
Is there a way to set this that I'm not seeing?Mike,
It sounds to me like you are using the "Month" view for that entry.
Default event creation in Month view results in an all day event.
Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
Try entering "Meeting at 9am"...that will create a one hour event named Meeting. -
How can I set the field ICt in component table of the Tasklist as "Input" ?
Hi experts,
How can I set the field ICt (BOM's Item Category (POSTP)) in component table of the Tasklist as "Input" Status (The system is in gray now).
I can define the different Category value by IB01 or IB02,then I can select them at the Tasklist's component table.But sometimes I need batch input such as LSMW,so pls kindly tell me how to setup it,thanks!
YinjunHi,
BOM is created with some component and item category.
In task list when you go to component, in normal case one selects and copies BOM over there by clicking component selection button.
Once BOM is copied over there the BOM item category will get copied. As it is BOM item category in Task list it is greyed and it will get copied automatically from BOM.
You specify item category required by you in IB01 or IB02 and then use that BOM in task list. Go to componenet tab and click component selection button. Once BOM is copied over there the BOM item category will get copied -
How can I set Array field which reside in a Structure field?
I use Adobe java XMP toolkit.
There are a few methods for setting structure and array items.
setStructField() and appendArrayItem().
However ducu stated that member of Structure may be array or structure, moreover array items also may be arrays or structures.
So how can I set Array field in Structure or Structure field in Array???
Thanks
AndreyOK, it worked first time (without exception) as I tried to set value of EXISTING field.
The trick is to add array or struct BEFORE setting their values.
This short example shows how it works:
XMPSchemaRegistry registry = XMPMetaFactory.getSchemaRegistry();
registry.registerNamespace(extNS, "pdfaExtension");
registry.registerNamespace(shemaNS, "pdfaSchema");
registry.registerNamespace(propertyNS, "pdfaProperty");
XMPMeta m = XMPMetaFactory.create();
m.appendArrayItem(extNS, "pdfaExtension:schemas", new PropertyOptions().setArray(true), "", new PropertyOptions().setStruct(true));
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:prefix", "dc");
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:namespaceURI", "http://purl.org/dc/elements/1.1/");
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:schema", "Dublin Core Schema");
m.appendArrayItem(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property", new PropertyOptions().setArrayOrdered(true), null, new PropertyOptions()
.setStruct(true));
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[1]/pdfaProperty:name", "contributor", null);
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[1]/pdfaProperty:category", "external", null);
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[1]/pdfaProperty:description",
"Contributors to the resource (other than the authors).", null);
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[1]/pdfaProperty:valueType", "bag ProperName", null);
m.appendArrayItem(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property", new PropertyOptions().setArrayOrdered(true), null, new PropertyOptions()
.setStruct(true));
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[2]/pdfaProperty:name", "coverage", null);
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[2]/pdfaProperty:category", "external", null);
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[2]/pdfaProperty:description", "The extent or scope of the resource.", null);
m.setProperty(extNS, "pdfaExtension:schemas[1]/pdfaSchema:property[2]/pdfaProperty:valueType", "Text", null);
Above code creates following XMP:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.1.1">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:pdfaExtension="http://www.aiim.org/pdfa/ns/extension/"
xmlns:pdfaSchema="http://www.aiim.org/pdfa/ns/schema#"
xmlns:pdfaProperty="http://www.aiim.org/pdfa/ns/property#">
<pdfaExtension:schemas>
<rdf:Bag>
<rdf:li rdf:parseType="Resource">
<pdfaSchema:prefix>dc</pdfaSchema:prefix>
<pdfaSchema:namespaceURI>http://purl.org/dc/elements/1.1/</pdfaSchema:namespaceURI>
<pdfaSchema:schema>Dublin Core Schema</pdfaSchema:schema>
<pdfaSchema:property>
<rdf:Seq>
<rdf:li rdf:parseType="Resource">
<pdfaProperty:name>contributor</pdfaProperty:name>
<pdfaProperty:category>external</pdfaProperty:category>
<pdfaProperty:description>Contributors to the resource (other than the authors).</pdfaProperty:description>
<pdfaProperty:valueType>bag ProperName</pdfaProperty:valueType>
</rdf:li>
<rdf:li rdf:parseType="Resource">
<pdfaProperty:name>coverage</pdfaProperty:name>
<pdfaProperty:category>external</pdfaProperty:category>
<pdfaProperty:description>The extent or scope of the resource.</pdfaProperty:description>
<pdfaProperty:valueType>Text</pdfaProperty:valueType>
</rdf:li>
</rdf:Seq>
</pdfaSchema:property>
</rdf:li>
</rdf:Bag>
</pdfaExtension:schemas>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta> -
How do i set the timeout value?
I'm doing an insert...in the insert i have a trigger that fires a http put. when i'm doing a couple inserts at a time, it works fine. However if i try to insert about 50 at one time (within msecs of each other) then i get the following error:
ORA-29276 transfer timeout
Cause: Timeout occurred while reading from or writing to a network connection.
Action: Check the remote server or the network to ensure that it responds within the timeout limit. Or increase the timeout value.
My question is, how do i set this timeout value?FYI,
IFS.PROTOCOLSERVER.SESSION.DEFAULT.Timeout
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
in cup server configuration -
How Can I Set a Javascript Value into an Attribute of BSP PAGE
Hi
Can anyone tell me.
How Can I Set a Javascript Value into an Attribute of BSP PAGEHi Mithlesh,
javascript runs on client side and you cannot assign the value to a Page attribute directly.
As a workaround,you can use an Inputfield,hidden if required,and set the value using javascript.Then the form will have to be submit to be able to read the value in onInputProcessing and then can be assigned to any variable.
In Layout
<head>
<script language="javascript">
function pass()
txt1 = document.getElementById("ip_mrf");
txt.value = "hello" ;
</script>
</head>
<htmlb:inputField id="ip_mrf"
value="<%=mrf_number%>"
visible="FALSE"/>
in onInputProcessing
cha1 = request->get_form_field( 'ip_mrf' ).
where cha1 is the page attribute
hope this helps,
Regards,
Siddhartha
Message was edited by: Siddhartha Jain -
How can i transfer a field value in the main report to its sub-report?
<p><font face="Arial" size="2">How can i transfer a field value in the main report to its sub-report?</font></p><p><font face="Arial" size="2">Please eloberate with example if possible!</font></p><p><font face="Arial" size="2">Thanks...</font></p><p> </p>
<p>You can do a couple of things - one would be to pass the information using the data linking expert. Right click on the subreport, choose 'Change Subreport Links' and select the field(s) you are wanting to pass to the subreport. CRW will build parameters and a record selection formula for you in the subreport, and if that's what you want, then great. But you can also remove the selection formula from the subreport and work with the parameter fields in the subreport however you would like.</p><p>Alternatively, you can look to passing Shared variables back and forth from the main and subreport. this link talks about the method to do this: http://diamond.businessobjects.com/node/251</p><p> </p>
-
How to pass the FORM Fields value by Form Personalization
Hi ALL,
I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
can any one suggest what to do???
i tried with these syntax
TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
Regards
RaviHi,
Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
Regards,,
Anil. -
When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!
Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now? -
Set External Field Value by Workflow
Is there any way to Set External Field Value by SPD 2013 workflow?
Hi j.kiani,
According to your description, my understanding is that you want to update an external column in a list by SharePoint workflow.
I did a test:
Create a list with an external column
Create a workflow , and add ‘Set Field in Current Item’ action, select the field is the external column, set the value to a value from the External Content type data source
Publish the workflow and start it on an item
The external column was changed to the value that I set in workflow. However, when I refreshed the external column by clicking the ‘sync’ flag, the data was changed to the old value.
I used ‘Update ListItem’ action, the result was same
It seems that there is not an OOB way to change external column with SharePoint workflow. You can change the external column by SharePoint web OOB way (Editing item) .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
How to Filter Lookup Field Values by Current User in Caml Query
sharadpatil
Hi,
If you want to use JavaScript, we can use SPServices to achieve it.
/* Get Current username */
var userName = $().SPServices.SPGetCurrentUser({ fieldName: "Title" });
/* Get Sites assigned to current user */
var query = "<Query><Where><contains><FieldRef Name='UserName' /><Value Type='User'>" +
userName + "</Value></contains></Where></Query>";
More information is here:
SharePoint – Filter Lookup Field Values by Current User
http://ljayaprakash.wordpress.com/2012/06/01/filter-lookup-field-values-by-current-user/
Best Regards
Dennis Guo
TechNet Community Support -
How do I lock a field so the current type in it cannot be overriden?
how do I lock a field so the current type in it cannot be overriden?
You can make the field Read Only. You need to be aware that if the form is cleared the typed value in the field will clear and the text in the "Options" "Default Value" will become the field's value. You can use JavaScript to make a form field Read Only and set the default value.
-
How to set hidden field value in form?
I've encountered a problem while developing a forum using JSF. See this code:
<h:form id="commmentForm" formName="commentForm" >
<h:input_hidden id="pageId" valueRef="CommentBean.pageId" value="${article.id}"/>
<h:input_text id="userName" valueRef="CommentBean.userName"/>
<h:input_text id="userEmail" valueRef="CommentBean.userEmail"/>
<h:input_text id="userURL" valueRef="CommentBean.userURL"/>
<h:input_textarea id="content" valueRef="CommentBean.content"/>
<h:command_button id="submit" label="Leave A Comment" commandName="submit" actionRef="CommentBean.createAction" />
</h:form>
I was trying to specify a hidden field that represents the unique ID number of the current article using <h:input_hidden> tag above. But RI complains that runtime expression is not permitted in 'value' attribute. So I set the attribute 'value' to arbitrary number such as '2', but it seems that CommentBean.pageId is still null.
So the question is:
1. Why can't I use EL in JSF tags attributes?
2. How can I resolve my problem mentioned above?
Thanks very much in advance!To solve the problem, you have to use two hiddenfields, say:
<h:input_hidden id="pageId"valueRef="CommentBean.pageId" />
<h:input_hidden id="articleId" valueRef="article.id"/>
I want to set the value of CommentBean.pageId to
${article.id} (article is not a managed bean) and to
let CommentBean.createAction insert a database row
whose page_id column is ${article.id}, so I think the
tags you suggested won't work for me.Why can't you interrogate your ComponentBean for its pageId property during your invoke() method? By the time your invoke() method is called, the value from the hidden field will have been pushed to the model, so this should be no problem. You could do Application.getValueBinding("ComponentBean.pageId").getValue() to do so.
Ed
Maybe you are looking for
-
Playing videos on Music app.
Since I downloaded upgrade, I cannot see music videos on Music app. I can see them one by one on the Video app, but when I create a playlist in order to shuffle the videos (for when I run), they cannot be seen. I can see them on iTunes and Video ap
-
CS6: Can't switch off color management in the printerdriver when photoshop manages colors
So this is weird: I'm using CS6 Extended and Lightroom 5 on a Windows 7 Pro machine, printing to an old Canon Pixma Ip5200R. When i print from Lightroom, i am using a special printer profile for the pixma and my photopaper, so color management is swi
-
I have looked into the settings of the graph but I cant find anything to change this.
-
How to Set a machine level Environment variable in remote machines
Hi, I have to set a List($ProjectName) as the value of an environment variable($PROJECTS). The cmdlet which I tried is : $remoteMachineList = 'machA', 'machB' $ProjectName = 'ProjA', 'ProjB', 'ProjC' foreach($remoteMachine in $remoteMachineList){ icm
-
Using API in EBS 12.1.1
Hi experts we have a problem with using EBS Standard packages called API, the problem is that we don't want to run or execute this package with apps user for security reason. but when we create new user and give the execute privilege on api package t