How do I set a time period longer than 7 days for keeping my browsing history on my Macbook Pro? The instructions for doing so on a Windows PC do not work with a Mac.

I am using Firefox 8.0.1. There seems to be no option anywhere in Preferences on my Macbook Pro for keeping the browsing history for a specific period of time. Earlier my history was kept for quite a while. Now it only shows for 7 days at the most, and if I quit firefox, it starts over again fro scratch the next time I open Firefox. Any suggestions? There are plenty of answers out there if you are using Windows, but I haven't found anything for using a mac.

There is no time limit in Firefox 4+ versions for the history.<br />
Firefox determines automatically how many pages can be kept without affecting the performance.<br />
You can see the current value via the reads-only pref places.history.expiration.transient_max_pages on the about:config page.
See:
* http://blog.bonardo.net/2010/01/20/places-got-async-expiration
If you lose the history then make sure that you do not use Clear Recent History to clear the browsing history.<br />
Also make sure that you do not have cleanup software that might clean up files in the Firefox Profile Folder.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*Firefox > Preferences > Privacy : History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History

Similar Messages

The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

My HP F4180 not working with my Mac Mini

My HP F4180 will not work with my Mac mini. I doesn't even like my set up disc. Please advise. Thank You.

10.9.1
This is the pop up message that I get when I try to load the set up file from the disc.
"You can’t open the application “HP Installer” because PowerPC applications are no longer supported."
Thanks for your help

My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

Why weren't we told that display mirroring would not work with a Mac older than 12 months?

Why weren't we told that display mirroring would not work with a Mac older than 12 months?

You were, just not directly. If you go to apple's mountain lion webpage, you'll see this note at the bottom:
1. AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).
http://www.apple.com/osx/whats-new/features.html

27" TFT TV not working with my mac mini

My brand new mac mini does not work with my 27" TFT TV (D-Boss) using the DVI connection. The mac mini works fine if connected to a 17" or 20" TFT display, but the screen of my TV is black and I get the error message "out of range" (strange with digital). The TV is working with my Windows laptop (analog and digital). I really have no idea where the problem is. Somebody can help me?
Thanks
-Linus

10.9.1
This is the pop up message that I get when I try to load the set up file from the disc.
"You can’t open the application “HP Installer” because PowerPC applications are no longer supported."
Thanks for your help

Iogear multilink BT keyboard (Model: GKM611B) not working with my Mac's

I purchased the iogear keyboard to work with both my iOS and OSX devices. iOS devices work perfectly, but none of the computers I've tried (Mac Pro and iMac's) 'discover' the keyboard. Anyone got this keyboard working with their Mac computers?

If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

I had an old version of firefox & it made me upgrade to a newer version, however once I upgraded it said it does not work with my Mac that is a OS 10.4 & not I cannot access or download firefox, how can I download a older version for my Mac?

I had firefox on my computer and it made me download the newer version, but once I downloaded it, it said it does not work on my computer which is a Mac OS 10.4 and now I cannot use firefox at all on my computer. How do I download an older version that will work on my computer?

As of Firefox 4.0 and newer one needs at least OSX 10.5+ and Intel hardware.
The latest you can use on your Intel with OSX 10.4.11 is Firefox 3.6.25 (released recently) which can be found at http://www.mozilla.org/en-US/firefox/all-older.html
If you were to update to say OSX 10.5.8 then you can use Firefox 9.0.1

Ethernet adapter not working with new Mac Mini after NetRestore.

I'm currently working with an issue regarding Mini 4,1s and their difference from the main driver set in 10.6.4. I'm in an educational environment and attempting to effectively netrestore a hard drive image that was built on a Mini 3,1 with all possible updates made to the OS (10.6.4).
The new minis have no problem netbooting, and downloading the disc image from the server *over ethernet*. In fact, they do it in a very rapid fashion. The issue is that once the machines boot up, they no longer have ethernet capabilities. In fact, the ethernet device does not even appear in system profiler at all. After reading quite a lot about this problem, it appears that there is a difference in the driver set on the special "Mid-2010 Mini 4,1" update and the driver set found in a normal 10.6.4 install.
I have attempted various permutations of installing the Mid-2010 update, but most of them include having an existing 10.6.4 install that was not built on the Mini, and attempting to install the update over the install, or replacing the driver in suspect itself. The issue persists.
Is there something I'm missing, and is this a common problem?
tl;dr: non mac mini 10.6.4 installation copied on mac mini 4,1, and ethernet drivers don't work.

Thanks for your suggestion, I cloned my 1.83GHZ Mac Mini's main drive with Carbon Copy Cloner and restored it onto a new 2.4GHZ Mac Mini. Since the new Mac was replacing the older one's mother ship role in my HTPC setup, this method would ensure the easiest transition. Everything works fine, except that ethernet wont work, it did before, but doesn't now. I already tried several confirmed-working-by-me cables and no luck.
I tried your step and understand the logic behind them, but as soon as I replaced my files with the ones you suggested from my 2.4GHZ Mac Install Disc, the system reports some conflicts. I repaired permissions after and before this happens (tried twice, once after successfully restoring via Tim Machine) and still it occurred. After reboot Ethernet was still dead and so was WiFi. Luckily I was able to get everything back to normal by replacing the entire Extensions folder with the one prior to the changes. Restoring the two files alone would not do it.
Any other suggestions?
Thanks.

I just ran a software update for Java and MacBook Pro SMC, now my Mini Display Port to HDMI TV is not working. The TV is flickering. The Mac Display is fine.

I was just watching / streaming TV off Safari on my actual TV.
I'm using a Mini-Display Port to HDMI cable for the connection to the external display.
Software update popped-up and said there was an update for Java and for SMC.
I ran the update and upon the computer restarting, my external display (my TV) is no longer working. It is now flickering.
It won't work in Mirroring or set up as an extended display.
I've reset SMC / PRAM / Safe Mode / Even restored from a Time Machine backup (From before the updates were done).
What could it be?!

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

FRUSTRATED!!! HP 6700 Scanning feature not working with my MAC

I just bought the HP Officejet 6700 at COSTCO primarily for its claimed scanning capabilities. The first frustrating warning was that the CD included with the device was not accepted by my IMac. So, I after a half hour of downloading time, I finally was able to set up the printing and Fax capabilities, but NOT the Scanning. The scanner software is evidently there, but it will not recognize the printer/"scanner" even when I click the browse button.
Before I send it back to COSTCO, I just want to make sure that I'm not missing something here.
And, is there anyway to call HP for live support?

Hi realworld,
I have spend the afternoon trying to re-create the issue you are experiencing with no luck. I have downloaded and installed the HP Officejet 6700 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks...dated 2013-11-15 and it works. I used both the Officejet driver and the Airprint driver, both worked, I am able to scan.
The issue you are experiencing is not the software it seems to be related to the computer or how it may have installed onto your computer. It could even be a firewall. Do you have a USB cable you can connect to see if you can scan with the cable to eliminate weather the issue is stemming from the network or not?
Here are some steps you can try, I have seen great success with these steps being completed in order.
Scrub (Removes all HP software)
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall
Reset Printing System
Click the Apple icon, and then click System Preferences .
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password .
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions (I know many of you have done this but because we have now done a scrub it is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer .
Restart the computer
Click on HP Officejet 6700 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks to download and then install the necessary software for mavericks.
Keep me posted with how this works out. I am certain this is not an issue with the software. This software was designed and released to work with Mavericks and as explained I downloaded it so I can see it with my own eyes. (I didn't want to insist it would work and find out that there is actually a problem with it )
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Apple DVI to Video Adapter not working with SL + Mac Mini

I've seen some issues with the video adapter putting out only black and white signal with Macbook Pros. That would be an improvement for me.
I can't get SL to play with the video adaper when I plug it into my TV. I get black and white and a bounching broken up signal, as though the refresh rates don't match. I can't play around with the settings because it's impossible to see what's on screen. I have to plug my monitor back in.
This used to work fine under Leopard.
How will I ever watch Mad Men now?

Why don't you click on the Apple icon at the top left of the screen.
Select About This Mac. Click on the info about which version of OS X you have - under the Apple icon - click twice to see your serial number. Use it to determine the model of your Mac Pro on Apple's web site. Inform those who would help you what model Mac Pro you have.
Click on More Info...
Select Graphics/Displays.
Inform those who would help you what your graphics card is.

Windows Radius / NPS not working with mac book pro 10.9.4 wired

Hi,
I'm trying to get my Radius windows server 2012 working with the correct setting for using 802.1x wired connection for the mac book pro. The only issue I'm having is there is not much setting in the mac book pro. I'm not sure what need to setup on the sever to make it connect correctly and assign it to the correct vlan when it's authenticated.
Here are some screen shoots for my mac book pro
So I've got it up to a point where I have this issue and here is my screen shots setting:
So the above are my windows 2012 screen shot settings.
On the mac book pro, I'm getting a prompted about adding certificate and I've added that into the laptop and then I need to put the username and password information. I put the following:
[email protected] and the password.
I'm current working with someone at HP on the switch settings, everything looks good.
I know the following:
1. Wireshark: shows server is getting request from the switch but it's not accepting them here are my logs on the NPS:
RAD01 6274    Information      Microsoft Windows security auditing.   Security            2014-08-21 12:40:24 PM
Here is the detail of the machine:
Network Policy Server discarded the request for a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:                              S-1-5-21-2690993882-1154983957-2264505580-1328
Account Name:                         [email protected]
Account Domain:                                  LCS
Fully Qualified Account Name: LCS\username
Client Machine:
Security ID:                              S-1-0-0
Account Name:                         -
Fully Qualified Account Name: -
OS-Version:                             -
Called Station Identifier:                      b4-39-d6-ec-2c-00
Calling Station Identifier:                     ac-7f-3e-e6-32-34
NAS:
NAS IPv4 Address:                   xx.xx.xx.xx
NAS IPv6 Address:                   -
NAS Identifier:                         5412zl-xxx-xxxxswithname
NAS Port-Type:                                    Ethernet
NAS Port:                                 170
RADIUS Client:
Client Friendly Name:               HP Procurve 5412zl switch
Client IP Address:                                xx.xx.xx.xx
Authentication Details:
Connection Request Policy Name:       Secure Wired (Ethernet) Connections
Network Policy Name:              Secure Wired (Ethernet) Connections
Authentication Provider:                      Windows
Authentication Server:             rad01.xxx.xxx.ca
Authentication Type:                EAP
EAP Type:                                -
Account Session Identifier:                  -
Reason Code:                          1
Reason:                                               An internal error occurred. Check the system event log for additional information.
Again I don't know what's the correct setting the default 802.1x for mac book pro, but it should correct.
I'm also not sure what the internal error message is regarding about. The switch should automatically put me to vlan 7
Can you some please help out what the correct authentication method for mac 10.9.4.
Thanks

Flash Player is a browser add-on, not a standalone application.
You can test if the player is correctly installed at http://www.adobe.com/software/flash/about/

The contacts and calendar data on my iPod touch will not sync with my Mac

I have a 2nd generation ipod touch, and an iMac running iTunes 8.2.1.
I have been away from my mac for a few months and have entered a lot of contact and calendar info into my ipod touch.
Now, when I try to sync the contacts and calendar data on my ipod touch with my mac, the data will not sync to my mac.
Similarly, for the last couple months, the contact and calendar data on my ipod touch has not been able to sync with my mobileme account.
I cannot afford to lose the contact and calendar data on my ipod touch.
Can anyone kindly inform me how to fix this syncing problem without losing such data?

DGKSA wrote:
I ended up entering the data onto my Mac, then nuking my iPod touch with a restore.
So, there is no need to respond to my question.
You can also mark your post as "solved" if you solved your problem on your own.
Only the original topic poster has the option to mark replies as either Helpful or Solved or to not mark a reply at all. The originator can also end the discussion by marking the topic as "answered," which displays a green star at the top of the topic page to let everyone know that the topic contains valid helpful information.
copied from "Terms of Use"

Hp laserjet 1320 not working with new mac

i've recently bought a new apple computer, the mac runs with os x 10.9.2.
now i'm trying to get my old hp laserjet 1320 to work together with my new computer - but neither the mac is cooperating nor the old laserjet. i've also installed a new hp officejet pro 8600 - this printer/scanner/fax works well, but i also wanted to use my old laserjet until i run out of printing cartrigdes )
thanks for the help!!!

Hello nyc213,
It sounds like you are unable to use your LaserJet printer with your computer. I recommend the troubleshooting in the following article named:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Check the printer
Go to the printer and check the following:
It’s turned on and is displaying normal status lights.
It has paper, and the paper isn’t jammed.
It has enough ink or toner.
Its cables are properly connected.
If your printer is attached to your computer’s USB port, open System Information, then click USB. If the printer’s name appears in the hardware list but the printer doesn’t work, review the printer’s documentation for further troubleshooting information.
Check your device’s USB connection
If the printer is on the network, open Printers & Scanners preferences, then add the printer again to create a new printer queue. For instructions, see:
Set up a printer
Use the best software for your printer
Make sure you have the correct version of your printer’s software (also called its printer driver).
If you’re using a printer that another user is sharing, make sure you’re both using the same version of the printer software. To find out which version you’re using, select the printer in Printers & Scanners preferences, click Options & Supplies, then click General. Note the driver version.
If you’re using a network printer or a printer attached to your Mac, make sure you have the latest version of the software for the printer. If you still have problems, try different printer software for your printer.Change or update printer software
If you still can’t print, reset the printing system.
Reset the printing system
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I set a time period longer than 7 days for keeping my browsing history on my Macbook Pro? The instructions for doing so on a Windows PC do not work with a Mac.

Similar Messages

Maybe you are looking for