How do I set a time value to a Time syntax attribute in eDirectory

I want to set a time value to an attribute in eDirectory defined as syntax Time. In the Resource referrence manual I can read that the schema mapping should be defined as Int for syntax Time. But further down in the manual the attribute Password Expiration Time is told to be defined as String in the schema mapping.
I have tried the both settings (int and string) but nothing will work. When trying to set a value to the Password Expiration Time I recieve the following error:
Unexpected type for attribute 'Password Expiration Time'. Received 'string'. Expected '0x18 (24)'
The value I try to set is: 20090122120000Z (this value is supported in the eDirectory manual)
I´m using the NDS gateway.
Anyone who know how to solve this issue?
// Per

Hello
=IF(C>1,1000,TRUNC(C*1000,0))
will do the trick.
Yvan KOENIG (from FRANCE mardi 13 mai 2008 17:47:01)

Similar Messages

How do i set the timeout value?

I'm doing an insert...in the insert i have a trigger that fires a http put. when i'm doing a couple inserts at a time, it works fine. However if i try to insert about 50 at one time (within msecs of each other) then i get the following error:
ORA-29276 transfer timeout
Cause: Timeout occurred while reading from or writing to a network connection.
Action: Check the remote server or the network to ensure that it responds within the timeout limit. Or increase the timeout value.
My question is, how do i set this timeout value?

FYI,
IFS.PROTOCOLSERVER.SESSION.DEFAULT.Timeout
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
in cup server configuration

How do I set ical default values in lion?

I have just upgraded to Lion and so far, so good. In the new iCal, how do I set the default values? In the old version, when you clicked on the calendar, the default value was a 1 hour meeting around the current time of day. The new version defaults to an all-day meeting. I like the old way better, or best would be to have it as a preference.
Is there a way to set this that I'm not seeing?

Mike,
It sounds to me like you are using the "Month" view for that entry.
Default event creation in Month view results in an all day event.
Lion iCal Help (Add events to a calendar) says: "Add a new event in Month view by double-clicking within the day you want the event to appear. Enter a name and time duration for the event in the event’s title field, and then press Return."
Try entering "Meeting at 9am"...that will create a one hour event named Meeting.

How do I set a NULL value for the parameter field

Hi
I've another question. I'm going to set single values for parameter fields.
// e.g. set today for StartDate parameter field
fc.setCurrentValue("", "StartDate", new Date());
It should be possible to set a NULL value for date parameter fields.
fc.setCurrentValue("", "StartDate", (Date)null);
But this do not work. How do I set a NULL value correctly?
Thank you in advance.
Best regards,
Thomas

First question - is it a stored procedure parameter?
You can't set a regular parameter field value to a null value.
There was an issue with old version of the JRC, where it was allowing null to go through, but had unexpected behavior at times.
Sincerely,
Ted Ueda

How Can I Set a Javascript Value into an Attribute of BSP PAGE

Hi
Can anyone tell me.
How Can I Set a Javascript Value into an Attribute of BSP PAGE

Hi Mithlesh,
javascript runs on client side and you cannot assign the value to a Page attribute directly.
As a workaround,you can use an Inputfield,hidden if required,and set the value using javascript.Then the form will have to be submit to be able to read the value in onInputProcessing and then can be assigned to any variable.
In Layout
<head>
<script language="javascript">
function pass()
   txt1 = document.getElementById("ip_mrf");
   txt.value = "hello" ;
</script>
</head>
<htmlb:inputField id="ip_mrf"
                           value="<%=mrf_number%>"
                           visible="FALSE"/>
in onInputProcessing
cha1 = request->get_form_field( 'ip_mrf' ).
where cha1 is the page attribute
hope this helps,
Regards,
Siddhartha
Message was edited by: Siddhartha Jain

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.

HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first.

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

How do I set up multiple computers to use time machine on time capsule

I have tried to set my other macs on time capsule using time machine as the backup device. All I get is the error message "there is a problem connecting ot the server.... Check the server name and ip address. This is supposed to be easy, so how do I set the other computers up?

Whether or not this is possible will depend on the type of modem that you are using with the Time Capsule.
If you have a simple modem (with only one Ethernet port), you can likely set up the Guest Network feature. If you have a modem/router (it will have multiple Ethernet ports), unfortunately, it is not possible to set up the Guest feature and have the Time Capsule operate correctly.
Can you provide the make and model number of the device that you call your "modem"?

How do I set iCal alerts to a specific time the previous day, regardless of their specific time (so I can get an overview of tomorrow)?

I think it would be incredibly useful to be able to get at, say, 10pm each evening, a pop up overview of the next day's events. I'm hoping for a tick box somewhere to set my default reminder as a specific time on the previous day, in the same way that you can do '15 minutes before'. Currently you can set reminders for a specific time and date, but, entering this for every item – especially if you want them to coincide – is more than slightly tedious. Furthermore, I input a lot of my Calender events on my iPhone (they sync via iCloud), which has no such functionality, rendering this essentially defunct.
Any ideas?

apple don't have a version of windows
only microsoft have windows
as how one automatate windows to send mails at a time
googled it for you
http://www.howtogeek.com/125045/how-to-easily-send-emails-from-the-windows-task- scheduler/
more options in the search
https://www.google.dk/search?client=opera&q=automatically+send+email+in+windows& sourceid=opera&ie=UTF-8&oe=UTF-8

How can we set the Order block for One-Time Billto-address?

Hi Experts,
How can we set Order bolck,if user uses one-time bill to address and needs to trigger workflow for releasing process according to order block.
Please suggest me.
Thanks and Regards,
Kiran

suggest me pls!!!!

How to dynamically set a bounded value for a VO at runtime

Hi all,
I am working on a custom page for time card summary, the VO's query like this:
select Timecard_Id,.... from timecard_summary where supervisor_id = :1
There is a utility that can retrieve supervisor_id from system, but I don't know how I can set this supervisor_id before the query is execute, I think I need a controller to do that right after user clicks "Go" button in simpleSearch Panel, but I cannot find the way to determine if the "Go" button in simpleSearch Panel is clicked.
THanks
-Bill

Hi Sumit,
I had tried over riding the initquery and execute query to meet the same requirement but the where clause i was setting wasn being set since the execute query somehow was making it null.
When i did hard code the whereclause params in the the executequery(),it worked fine but then i couldn have passed any variables.
Then finally i went around the oaf guide and found something like ,
dic[]=getcriteriaitems.... and it solved the purpose for me.

How do I set up an email for face time and Game Center for my child's ipod

How do I set up an email account for my sons iPod so he can do face time and Game Center with friends?

I would create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. You have to do it in your mane if he is not yet 13.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Then use that account for Settings>FaceTime and Gamecent
If yo want it can also be used for:
- Settings>Messages>Send and receive to allow him to Message
- Settings>iCloud to allow him to have his own calendar and contacts
Continue to use the common ID for Setting>iTunes and App Stores

How do I set subproperty values of a parameter (container) I'm passing?

I want to pass a custom data type (a container with subproperties)as a parameter.
How do I specify the subproperty values in the parameter expression for the SequenceCall step? Can I specify some subproperty values, and leave the others at their default values?
I know that I could create a Local variable of the same type in the calling sequence, set it up in one step, and then pass the whole thing in the SequenceCall step, but is there a way to specify the values in the parameter expression instead?

Hi,
Is this the sort of thing your are after.
regards
Ray Farmer
Regards
Ray Farmer
Attachments:
Sequence_File1.seq ‏12 KB
Sequence_File2.seq ‏12 KB

How do I set up voicemail for the first time?

I feel like i am losing my mind. I CANNOT find simple instructions (even in the manual) on how to set up my husband's voicemail on the BB 8800. There are all kinds of questions and answers about voicemail, but I just need to know how to set it up for the first time. The message you get when you call the phone is "This user has not yet set up voicemail" (or something to that effect).
PLEASE HELP!
Solved!
Go to Solution.

This is simple in deed! Go to Call Log -> click Menu and select Options -> Voice Mail. Now in the Access Number put your carriers Voice Mail Box number. Some carrier requires access password which you can also put in the.
Let know if this helps.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

How do I graph multiple bit values on one time axis?

I want to graph multiple bit values, all of which will change back and forth from 0 to 1, on the same time axis, but I don't want any visual overlap between the different bit value traces. Now I could do this by graphing bit one as either 0 or 1, bit 2 as 2 or 3, bit 3 as 4 or 5, etc., but I would really rather have multiple Y axes showing 0 to 1, stacked vertically on the same time (X) axis.
You could visualize this as multiple pens on a strip chart continuously recording different values. Each pen has its own vertical area in which it writes, but all pens could be writing data from the same numerical range.
Hmmm... I think my description might be roughly as clear as mud, but if anyone out there can figure out what I am asking and has potential solutions, please let me know.
Thanks!

Thanks. I will look at that VI, but I think I have already seen it. My problem is that I have CAN data coming in for an hour or so, but the time interval between receiving specific CAN arbitration IDs varies, so I want to plot the X axis against specific, varying time values, not a standard dT. I'm not sure I can do this on a digital graph, but I haven't given up hope yet.
BTW, I am receiving 8-byte CAN packages. Some of the bytes represent actual values, but I need to break others up into individual bit values to see error and status flag settings. Once I break the bytes into bits, I convert from analog values to digital values.

How do I set a time value to a Time syntax attribute in eDirectory

Similar Messages

Maybe you are looking for