How do I setup Multiple Inputs on a single card into multiple tracks (devices) in Adobe Audition?

With a single Audigy 2 Card, how do I setup to record from two of the inputs (line-in and mic) into separate tracks in Adobe Audition 1.5?
I am trying to get the different inputs to list as different devices in Adobe Audition 1.5 so that I can record to multiple tracks simultaneously with different input.
Is it possible?
Any help is appreciated.
Thank you

I need to know the same thing when using an Audigy2 ZS Platinum Pro. Neither the users manual nor the website provide anything more technical than how to hook up speakers wires.
If you cannot multitrack from the multiple inputs, is the IEE 1394 (firewire) port capable of 6 pin connection to a Yamaha digital mixer with an MLan digital I/O card. If so, will the 16in/16out from the MLan pass through and be recognized by Adobe Audition?
Thanks

Similar Messages

Automator workflow to TAR multiple files in a single directory into multiple TAR archives, in succession?

Good afternoon,
I have set up an automator service that TAR's a folder into an archive for me and it works quite nicely. Idealy however, I would like to be able to highlight several folders, right click and have automator tar each folder into it's own TAR archive, but do it one by one.
Example:
FOLDER 01
FOLDER 02
FOLDER 03
Highlight all - Right Click - "TAR Folder" - Automator takes over at this point and TARs each one into:
FOLDER 01.tar (Once complete moves onto:)
FOLDER 02.tar (Once complete moves onto:)
FOLDER 03.tar (Finished)
I'm not 100% sure so I guess it would be a good time to verify, is there a problem with having the system try to TAR multiple folders at one time? If it is not a problem then I guess this discussion itself is pointless and I can simple right click on each folder and select "TAR Folder" and just wait until they're all finished. I would think that it would be ideal for the system to do each one individually and not try to do them all at one time.
Any help would be appreciated.
Thank you!!

I don't think I have the following totally fleshed out but you probably can extrapolate on it. This is a service which you can right click a set of folders and it will tar the files within those selected folders with then file names "name xxx.tar", where name is the tar'ed file/folder and xxx is a count within the folder.
I think that is what you originally specified so I am a bit confused by your script with the bit about Archive.tar.
Anyway here the basic idea:
I ran the script directly with a folder argument just to see it indeed tar's up all the stuff inside, one tar per item.

Split Single IDOC into Multiple IDOC's Based on Segment Type

Hi Experts,
I have a scenario IDOC to FILE , Split Single IDOC into Multiple IDOC's based on Segment Type
Outbound:
ZIdocName
Control Record
Data Record
Segment 1
Segment 2
Segment 3
Status Record
I should get output like below
Inbound:
ZIdocName
Control Record
Data Record
Segment 1
Status Record
ZIdocName
Control Record
Data Record
Segment 2
Status Record
ZIdocName
Control Record
Data Record
Segment 3
Status Record
Please suggest me step by step process to achieve this task.
Thanks.

Thanks a lot Harish for reply.
I have small doubt. According to your reply , If we have N number of segments in single IDOC with same fields in all segments then for splitting Single IDOC into Multiple IDOC's based on Segment Type we need to duplicate N number of target IDOC tree structure.
Is that possible to Split single IDOC into Multiple IDOC's based on Segment Type using only one Target IDOC structure without duplicating the Target IDOC structure tree.

Splitting single video into multiple files - workflow improvements?

I regularly need to split a single video into multiple separate files that are used by other programs. I'm using Premiere Pro CS4 for a number of reasons including the ability to easily and accurately select a scene by individual frames, native audio and video effects/filters, and the ability to import and export various video types. I'm open to using other tools, but I haven't yet found one that is even close to Premiere Pro when it comes to accurately selecting split points.
I'm not a Premiere Pro expert. I have been doing this for about four months and have read many resources (books, forum posts, help guides) to refine the workflow I'm currently using. My question: does anyone know any improvements that might save me time/keystrokes.
Current workflow:
I've bound F8 to File > Export > Media
Import video file
Open in source monitor
Set In and Out points for scene in source monitor
Ctrl-drag from source monitor to Project Panel (creates a subclip)
Repeat 3 and 4 for all scenes/subclips
Select all subclips from Project Panel and drag to timeline
Set work area bar to first subclip in timeline by the following four keystrokes: Home, Alt-[, PageDown, Alt-]
Type F8 (File > Export > Media shortcut). Type output file name, click OK and the first subclip is put in the AME queue
For the remaining subclips, type: Alt-[, PageDown, Alt-], F8, output file name, OK and repeat until done
Any thoughts/ideas on workflow improvements?
Thank you!

Thank you Hunt.
For the sake of brevity, I didn't include all of the details about the various aspects of the projects.
Early on I was doing what you suggested and yes, it is a little quicker. I learned (painfully) a couple of months later that I sometimes have to go back and adjust the clips and this method (trim to timeline with no subclips) resulted in quite a bit of duplicate effort (to reobtain start/stop points). I've since learned that managing the "scenes" as subclips in topical bins allows me to go back and make adjustments, long after I've totally forgotten about the project content, without a lot of unnecessary reworking.

How to submit data from multiple Input Ports in single SUBMIT button click

Hi,
I am in SPS8.
What exactly steps I need to perform to submit data from multiple Input Ports.
I couldn't able to submit One input Form and one Input Table to BAPI data service in single SUBMIT button click.
I debugged the VC application in SPS8.
While debugging, I found that when I click the SUBMIT button in the Input Form, Only data in that Input
form are being passed to the BAPI, But not the Table Form data.
If I click on the SUBMIT button in another Input Table, Only data from that table is being passed to the BAPI, but not the Input form data.
Essentially I need to submit both of them in one SUBMIT button.
Thanks,
Ramakrishna

Ramakrishna,
From the word document that you sent to me the steps you are missing to map the appropriate information into the BAPI is first you are not mapping all data rows into the table input port. To do this double click on the input table view and change your selection mode from single to multiple. Then when you click on your link between the BAPI and your input table you will see a new option appears under data mapping "Mapping Scope" select All Data Rows.
That's the first part of the problem to get the BAPI to recognize both the inputs coming from the form and the table eliminate the submit button from the form. Drag and drop a link from the output port of the table view to the Input port of the BAPI. Double click on the link between the BAPI and the table view and open the expressions editor for the two fields:
1/ Automatic Source
2/ SKIP_ITEMS_WITH_ERROR
On the hierarchical folder structure on the right expand expand the Data Fields node to find the fields from the form and map them accordingly.
Now when you hit the submit button on your table it should pass the BAPI all the parameters from both the form and the table.
Hope this helps,
Cheers,
Scott

How can I stop Compulations CDs from being broken up into multiple different Albums when imported into Itunes?

I am currently using Itunes 10.6.1.7. When I attempt to import my CDs, any that are Compulation Cds (with multiple artists), the CDs aren't being imported into the same folder and are broken into multiple listing in my Itunes library.
How can change this so that they are imported only by Album?

I think even using Get Info may not reveal the change, though it is possible the behaviour has altered since I last tested it. Playing or updating the tracks location in a script such as UpdateTagInfo seems to get iTunes to re-evaluate the tag.
Assuming WMP is involved it may be best to make the necessary settings adjustments to prevent further changes, use the script to get all of the background changes exposed within iTunes, then correct as you see fit. Alternatively I do have another script called ExportImport that could be used to back up the current state of your tags (you should temporarily rename the media folder during the export phase), after which you would then run UpdateTagInfo and then use ExplortImport in its import mode to restore the corrupted data.
tt2

HT1918 how can i setup my account without a credit card

how can i setup my account without a credit card

Thanks SniperKat but I don't know why for some reason the "NONE" disappeared...
I started to create an account and when I saw the credit card thing I just clicked back and back and so I closed the browser... every free app or something free I get it appears a window : " You have to review some of your information about your account" .... but I don't have an account yet because I didn't create it.... the only solution is to create a new e-mail account and go to iTunes store and create a new account with the new e-mail and be very carefull with the "Free app" this time...

Simultaneously triggered acquisition: Multiple PXIe-7962R + NI-5734 cards, across multiple PXIe-1085 chasses

Hi all,
I need to do high-frequency, high-channel-count acquisition.
Specs
Signals: 10 MHz, 60 channels
Controller: PXIe-8135 (Windows 7)
Chasses: PXIe-1085 (2x)
Input cards: PXIe-7962R FlexRIO base with NI-5734 digitizer (15x)
Description
Each FlexRIO card will store data in circular buffers, and continuously monitor the voltage levels. When any one channel exceeds the user-defined threshold, all 60 channels need to be triggered simultaneously to pass waveform data (200 μs pre-trigger, 300 μs post-trigger) to the host OS for logging.
In other words, every FlexRIO card needs the ability to fire the trigger, which is then received by all 15 FlexRIO cards (the card that fires the trigger also needs to receive the trigger).
Question
Can I achieve this with only a single PFI line? Or do I need some other technique?
I've found some examples, but they only show single-source and single-card triggering, e.g. https://decibel.ni.com/content/docs/DOC-30182 uses one analogue input to trigger the acquisition of 2 channels on the same card.
Any advice would be much appreciated. Thanks!

Assuming you are using LV 2013 or 2014 you should download version 1.3.4 of the FlexRIO Instrument Development Library (FIDL). This will install 5734 Acquisition Engine examples which use the MultiRecord Library to stream data to the DRAM in a circular buffer, allowing you to recover pre-trigger samples. The example also demonstrate how to implement the Syncrhonization Library that synchronizes triggered acquisition to within a single sample period across multiple devices.
Getting the example to work across two chassis' may be difficult, but I believe it is possible. Though to do so you will need a timing and sync module in each chassis to distribute the triggers and reference clock that the sycnrhonization library requires.
National Instruments
FlexRIO Product Support Engineer

Extract Multiple Rows from a Single Table into a Single Row in a New Table

I have a table in a database that contains contact data like name, address, phone number, etc.
The folks who designed the database and wrote the application wrote it so that all contact records are placed in that table, regardless of contact type. In fact, the contacts table does not even have a column for "type" even though there are many
different types of contacts present in that table.
I am trying to write a mail merge style report in SRSS, that gets sent to a specific type of contact, based on criteria provided that must be obtained from another table, and that data is then used to get back to a specific set of contacts from the contacts
table.
The attached file directly below describes my problem and all related information in an extremely detailed way.
SRSSMailMergeIssue.pdf
Unless there is a way to make a SRSS Tablix point to two different data sets in SRSS, it looks like I have to combine multiple rows from the same table into a new table.
If anyone can review the details in the attached pdf file and possibly point me in the direction I need to run to solve this probelm, I would greatly appreciate it.
I also included a document (below) that shows the tables I reference in the probelm description.
dbtables.pdf

I found a solution.... and posted it below
select
dk.ucm_docketnumber [UCM DocketNumber],
dk.ucm_docketid [UCM DocketID],
vc.FirstName [Victim FirstName],
vc.MiddleName [Victim MiddleName],
vc.LastName [Victim LastName],
vc.Suffix [Victim Suffix],
vc.Address1_Line1 [Victim AddressLine1],
vc.Address1_Line2 [Victim AddressLine2],
vc.Address1_Line3 [Victim AddressLine3],
vc.Address1_City [Victim City],
vc.Address1_StateOrProvince [Victim StateProvince],
vc.Address1_PostalCode [Victim Postalcode],
oc.FirstName [Offender FirstName],
oc.MiddleName [Offender MiddleName],
oc.LastName [Offender LastName],
oc.Suffix [Offender Suffix],
oc.Address1_Line1 [Offender AddressLine1],
oc.Address1_Line2 [Offender AddressLine2],
oc.Address1_Line3 [Offender AddressLine3],
oc.Address1_City [Offender City],
oc.Address1_StateOrProvince [Offender StateProvince],
oc.Address1_PostalCode [Offender Postalcode],
pc.FirstName [Arresting Officer FirstName],
pc.MiddleName [Arresting Officer MiddleName],
pc.LastName [Arresting Officer LastName],
pc.Address1_Line1 [Arresting Officer AddressLine1],
pc.Address1_Line2 [Arresting Officer AddressLine2],
pc.Address1_Line3 [Arresting Officer AddressLine3],
pc.Address1_City [Arresting Officer City],
pc.Address1_StateOrProvince [Arresting Officer StateProvince],
pc.Address1_PostalCode [Arresting Officer Postalcode]
FROM ucm_docket dk
left outer join ucm_victim v on dk.ucm_docketid = v.ucm_docketnumber
left outer join contact vc on vc.contactid = v.ucm_victimlookup
left outer join ucm_offender o on o.ucm_offenderid = dk.ucm_offenderlookup
left outer join contact oc on oc.contactid = o.ucm_individualid
left outer join contact pc on pc.contactid = dk.ucm_ArrestingOfficerLookup
WHERE (dk.ucm_docketnumber = @DocketNUM)

Split single row into multiple rows containing time periods

Hi,
I have a table with rows like this:
id, intime, outtime
1, 2010-01-01 00:10, 2010-01-3 20:00
I would like to split this row into multiple rows, 1 for each 24hr period in the record.
i.e. The above should translate into:
id, starttime, endtime, period
1, 2010-01-01 00:10, 2010-01-02 00:10, 1
1, 2010-01-02 00:10, 2010-01-03 00:10, 2
1, 2010-01-03 00:10, 2010-01-03 20:00, 3
The first starttime should be the intime and the last endtime should be the outtime.
Is there a way to do this without hard-coding the 24hr periods?
Thanks,
Dan Scott
http://danieljamesscott.org

Thanks for all the feedback, Dan.
It appears that the respective solutions provided will give you: a) different resultsets and b) different performance.
Regarding your 'truly desired resultset' you haven't answered all questions from my previous post (there are differences in the provided examples), but anyway:
I found that using CEIL or ROUND makes quite a difference, using my 'simple 3 record testset' (30 records vs. 66 records got initially returned, that's less than half of the original). That's quite a difference. However, I must call it a day (since it's almost midnight) for now, so there's room for more optimizement and I haven't thoroughly tested.
But this might hopefully make a difference performancewise when compared to my previous 'dreaded example':
SQL> drop table t;
Table dropped.
SQL> create table t as
2 select 1 id, to_date('2010-01-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-01-03 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
3 select 2 id, to_date('2010-02-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-02-05 20:00', 'yyyy-mm-dd hh24:mi') outtime from dual union all
4 select 3 id, to_date('2010-03-01 00:10', 'yyyy-mm-dd hh24:mi') intime, to_date('2010-03-03 00:10', 'yyyy-mm-dd hh24:mi') outtime from dual;
Table created.
SQL> select id
2 ,      max(intime)+level-1 starttime
3 ,      case
4           when level = to_char(max(t.outtime), 'dd')
5           then max(t.outtime)
6           else max(t.intime)+level
7         end outtime
8 ,      level period
9 from   t
10 connect by level <= round(outtime-intime)
11 group by id, level
12 order by 1,2;
        ID STARTTIME           OUTTIME                 PERIOD
         1 01-01-2010 00:10:00 02-01-2010 00:10:00          1
         1 02-01-2010 00:10:00 03-01-2010 00:10:00          2
         1 03-01-2010 00:10:00 03-01-2010 20:00:00          3
         2 01-02-2010 00:10:00 02-02-2010 00:10:00          1
         2 02-02-2010 00:10:00 03-02-2010 00:10:00          2
         2 03-02-2010 00:10:00 04-02-2010 00:10:00          3
         2 04-02-2010 00:10:00 05-02-2010 00:10:00          4
         2 05-02-2010 00:10:00 05-02-2010 20:00:00          5
         3 01-03-2010 00:10:00 02-03-2010 00:10:00          1
         3 02-03-2010 00:10:00 03-03-2010 00:10:00          2
10 rows selected.
SQL> By the way: I'm assuming you're on 10g, is that correct?
Can you give us some information regarding the indexes present on your table?

Splitting the single record into multiple records based on validity

Hi Guru's,
basically i am an BI consultant with less knowledge on ABAP, can i request your help on the ABAP task.
I am working on HR module which is integrated with SAP BI, the reports will be executed based on calendar month the requirement is i should split the single record into a multiple records based on validity of the record. basically the HR data would be in data from and date to.
below is the logic
Check whether the start and end date of the record are in the same month and year.
If yes  nothing changes
If no  create multiple records
1st record  original start date of the record u2018till end of that month
Following record  1st of the next month u2018till last day of the month
u2026
Last record  1st of the month u2018till original end date.
All fields will have the same values, only the datefrom and dateto fields change.
Can any one please provide me the same code to proceed on my task.
Thanks and Regards,
Venkat

Hi,
Using Rule group we can split it.
Using Rule Group in SAP-BI Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20rule%20group%20in%20sap-bi%20%20part%20-%201.pdf
Thanks
Reddy

8500 adf scan Breaking a single page into multiple pages

I have a 8500A Premium. Lately when I am scanning multiple sheets via the ADF, the scan will take each sheet and break it into multiple sheets on the scan. i.e., if I am scanning 5 sheets, I may end up with 20 partial sheets in my scan.

Hello there @coolhandluke2 ,
I read about the unusual scanning issue you are facing when you scan with your Officejet 8500A. I would suggest trying a multiple copy for starters to see the copies will also show irregularities.
If the copies work fine, the issue is most likely within the software.
Here are some steps to try!
Power reset:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
Uninstalling the Printer Software, restarting the computer and reinstall the printer HP Officejet Pro 8500A Premium e-All-in-One Printer - A910n Drivers
Let me know the results, good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can I export a single file into multiple files?

Is there an option or a plugin that would allow me to set markers in the audio, and then have Soundbooth export the audio into multiple files?
As an example, let's say I have a 1 minute audio file. I place a marker at 0:00 and another marker at 0:10 and a third marker at 0:30. I then would select Export Multiple and I would end up with three seperate wav files, one 10 seconds long, the second 20 seconds long and the last one 30 seconds long.
Thanks

Hi laforcej
Open the PDF In Acrobat ...
Go to Tools -> Pages -> Extract
Now Select the Page Number you Want to Extract and Save them

How do I keep iTuunes from splitting up 1 album into multiple albums

I have a number of albums where the main artist is perfroming with other muscians listed with the title of the song. When I import these albums into iTunes, it takes one album and splits it up into 10-12 different albums; 1 album for each song. How do I keep iTumnes from segregating songs that are really all part of one album? I don't want to to edit each song to remove the second artist, in order to re-integrate the songs back into one album. What a pain. Help.
Thanks,
Olyduck
PS: I never did encounter this issue when using Windows Media Player.

The sort fields control where in a sorted list a given value appears, e.g. you can ensure that David Bowie is sorted under B instead of D by setting the sort artist, sort album artist and sort composer to "Bowie" or "Bowie, David" where relevant. Experience suggests however that you shouldn't try to fix multiple album listings by giving different values the same sort value. It may sometimes work in iTunes, only to fail when you put those tracks on a portable device or add another album by the same artist.
tt2

How to use Power Query to load data from a single source into multiple tables

Hi all,
I have a requirement to load my data into three different data models using Power Query. Is that possible?
My source is a SharePoint survey list, with similar questions like:
1) Course lecturer - John Doe
1a) The course was useful (rate 1 to 5)
1b) The lecturer displayed good knowledge of topic (rate 1 to 5)
2) Course Lecturer - Mary Brown
2a) The course was useful (rate 1 to 5)
2b) The lecturer displayed good knowledge of topic (rate 1 to 5)
I would like to split the data into separate data models (one for John Doe; another for Mary Brown), so that I can compare the different lecturers. Other than running separate surveys for each of them, I thought of using Power Query to transform the data.
Is it possible?
Thanks.
Regards
GM

Yes, this is possible.
Start with a single query that returns you the data for all lecturers.
Right-click on the "all lecturers" query in the queries pane, and choose Reference, once for each lecturer. This will create a query for each lecturer.
Open the query for each lecturer and filter the data so that only that lecturer's results are visible.
Click "Close & Load To..." for each lecturer's query to load the data into the data model. This will create a data model table for each lecturer.
If your question is more about how to transform such a survey list into a table that can be easily filtered, please provide an example of how the list shows up in Power Query.
Ehren

How do I setup Multiple Inputs on a single card into multiple tracks (devices) in Adobe Audition?

Similar Messages

Maybe you are looking for