How do I specify handleTransactionsManuallyForSybaseJConnect with 1003DP2?

Hi,
In the new 1003DP2 APi getLogin has been deprecated. Up until now I have used it to set the Sybase flag so that transactions would actually get committed:
dbLogin = sssn.getLogin();
// XXX FIX for "SET CHAINED..." exception
// Sybase JConnect5.5 doesn't handle autocommit properly
// Might not be required in future releases of JConnect
dbLogin.handleTransactionsManuallyForSybaseJConnect();
Q: How do I set this if I switch to a session broker?
Also a secondary Q: Is there a known problem in 1003DP2 with reading a an alternatively named sessions.xml file? No matter what I try I can'g get it to load the file if it's named something else. Also the error message specifies "session.xml" (no 's' at the end) but I'm assuming that's just a typo...
Best regards,
Andrei

I have to admit I'm not familiar with the Sybase semantics here, and I'm not sure if this applies in 10g, but to answer your questions so hopefully you can experiement:
You can get the the Login from sssn.getProject().getDatasourceLogin() -- hopefully that has the right API you need.
As for the SessionBroker, I don't know why it's not in the javadoc, but there is a method to getSession(String name) and you can get the session names from the sessiobroker with (you guessed it) getSessionNames. You can poke around the source for this class -- source.zip in the jlib in your toplink directory. Perhaps you see something more to your liking.
- Don

Similar Messages

How do I specify exact corners with the rectangular selection tool?

Suppose I have an image 2000 pixels wide by 1000 pixels high. Pixel (0,0) is at the top left as you view the image. Using the rectangular selection tool, how can I specify an exact area to select? Say, for example, I want to select the area defined by (0,0), (100,0), (100,100) & (0,100), how would I do this?
I'm using Photoshop CS6 on a Mac with OSX 10.8.3.
Any help is appreciated.
Thanks,
Kevin H.

Mylenium,
33,406 posts! That's amazing. Thanks for your technique for specifying an exact selection size. I tried it out and it works, but is there a way to get the marquee to snap to the guides, as opposed to snapping to pixels. I can't quite get the marquee to fall exactly where I place the guides, at least not easily.
Here's a method I've come up with since posting my question. (I guess I should have tried harder to figure this out before asking the question.)
Figure out beforehand where you want the corners of the selection marquee to be.
Activate the rulers: View>Rulers or (Cmd-R.)
Set rulers to pixels: Photoshop>Preferences>Units&Rulers>Rulers>Pixels
Select the rectangular selection tool.
In the menu bar for the selection tool choose Style>Fixed Size. Then in the dimension boxes to the right of the Style button, type in the width and height you want for your selection, e.g. 200 by 100 pixels.
Zoom in on where you want the top left pixel of your selection to be. Zoom in enough to clearly see the pixel.
With the selection tool active, click-and-release on the pixel you have zoomed in on.
Go back to normal view (Cmd-0) and you should see your entire selection.
This answers my own question, and with your method I now have two ways to do this.
Thanks,
Kevin H.

How do you specify a line number with getline() (c++)

How do you specify which line for getline() to read with c++ similiar to how awk uses $1, $2, $3 , etc etc...
Example:(Ignore the underscores)
Line1 Line2
10____10
20____20
30____30
40____40
if I were making a program to remove 10 on the first line and 20 on the second line how would I tell getline which line to read
Example source code:
#include <cstdio>
#include <fstream>
#include <string>
#include <iostream>
using namespace std;
int main()
string line;
string line2;
ifstream in("/Users/lundquisted/Desktop/infile.txt");
ofstream out("/Users/lundquisted/Desktop/outfile.txt");
while( getline(in,line) )
if(line != "10")
out << line << endl;
while (getline(in,line2) )
if(line2 != "20")
out << line2 << endl;
in.close();
out.close();
remove("/Users/lundquisted/Desktop/infile.txt");
rename("/Users/lundquisted/Desktop/outfile.txt","/Users/lundquisted/Desktop/inf ile.txt");
return 0;
}

Eric Lundquist wrote:
store the output of a system() command within a c++ program to a string and/or variable
A number of apps call Unix utilities and capture both stdout and stderr, typically for viewing in a log window, but for other uses as well. Xcode, for example, starts up gcc and does various things with the text that gcc might otherwise print in a Terminal window. Most apps that rely on Unix commands that way don't use "system()", which is a rather crude way of launching utilities that leaves the parent program with very little control. Usually, the best way to manage helper utils from a Cocoa app is by using NSTask and NSPipe. If you spend some time with the two following pages, you'll learn how to do almost anything you want with command line utils from inside a Cocoa app:
[http://www.cocoadevcentral.com/articles/000025.php]
[http://macosx.com/forums/archive/t-3927.html]
The first link goes to a great tutorial on using NSTask. Capturing stdout and stderr are only covered briefly towards the end, however. Note the last comment explaining why "system()" is a bad idea.
The second link goes to a forum thread. Scroll down to the code posted by "blb" for some very clear examples of launching with NSTask and reading the output with NSPipe.
If you really want to use a shell command, you could give NSTask a command like ' +bash -c "ls -lt | grep drwx"+ ' (see how setArguments: is used in the tutorial).
If you just want to do something cheap and dirty with "system()" so you can see some awk output while you're learning how to do things the right way, I guess you could do something like this:
system(" cat ~/random.txt | awk '{print $2}' > MyFile.txt");
NSString *myString = [NSString stringWithContentsOfFile:@"MyFile.txt"
encoding:NSUTF8StringEncoding error:nil];
Of course you can just read MyFile.txt into cin if you're not using Cocoa.
- Ray

How Do I Specify No Cache With HTTPMultiservice?

Exactly how would I specify no caching of an SWF file using HTTPMultiservice? For example, you can do it using URLRequest with the code below. Is there a way to do it with HTTPMultiservice:
var loader:URLLoader = new URLLoader();
var request:URLRequest = new URLRequest(whatever url);
request.requestHeaders.push(new URLRequestHeader("pragma", "no-cache"));
request.requestHeaders.push(new URLRequestHeader("Expires", "Thu, 01 Jan 1970 00:00:00 GMT, -1"));
request.requestHeaders.push(new URLRequestHeader("Cache-Control", "no-cache, no-store, must-revalidate"));
loader.load(request);

Ok eventually I tried this:
operation.headers = {"meta http-equiv":"Cache-Control", content:"no-cache"};
And I got the following error:
Error# 2096: The http request header meta http-equiv cannot be set via Actionscript. null.
Which maybe it means worked, but you can't do it I guess. Not sure.

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How to set up SAPconnect with email server

Hi,
Does any one know <b>how to set up SAPconnect with email server</b>
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

How Can i specify multiple server names in rwservlet.properties file?

How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How do I specify the JRE i wish to use to Run an Application.

Hi Everyone;
Please bear with me if you read this before.
I have installed java 1.3.1 and java 1.4.1 in that order.
The JRE used by default is java 1.4.1
How do I specify the JRE I wish to use to Run an Application from a command prompt.
Example:
Java -something org.jboss.Main
help ??
Stephen

I was a lil embarrassed. I told my supervisor that the installation of java overwrites the JRE and that's that.
My supervisor took 10 minutes and went through it and found java.exe in the System32 file.
The java.exe file is found in guess where "C:/WINNT/System32/" folder how nice. C:/WINNT/System32/ is in the path. Not only that it's the first entry in the path. So when I execute java it is not using java.exe any one of the java files that I got from the java website.
So I don't have any control over the version.
Oh well;
That's life. That's 1 for my supervisor.
Stephen

How to integrate File Server with Portal??

Hi all,
can any one tell me that how interegate the File Server With Portal Server??
In my portal server under home tab i have sub tab (second level navigation) of File server.Whe i click this tab it throws an syntax error
ie
System Error
An exception occurred during the program execution. Below you will find technical information pertaining to this exception that you might want to forward to your system administrator.
Exception Class :: class com.sapportals.wcm.repository.NotSupportedException
Exception Message :: Not Implemented
thease are the steps that i have taken
>created HTTP System..
>created WebDAV Repository.
>Created Cache.
>Created KM WebDAV System.
>Created Iview and in iview i have to specify the <b>Path to Initially Displayed Folder</b>
i have specified the folder of file server that i want to display..
but i get the same syntax error ..
infact i dint get that folder in KM.
But when i specify the folder that is present in KM its Work fine..
Now the Scnerio According to me is that File server is not integrated properly
if it would be integrated properly i would be able to see the folder of File server in KM...
am i correct ??
please Guide me to integrated the File Server Properly??
Points will be given for any help..
Regards
Vinit

Hi Vinit,
if you want some Windows File Server integrated into Portal, please do not use a WebDAV Repository, but use the File System Repository instead. Therefore you need to configure the according Repository Manager. Please refer to this documentation:
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/ed/b334ea02a2704388d1d2fc3e4298ad/frameset.htm">Integrating Documents from a Windows System into KM</a>
HTH,
Carsten

How to know if implementation with a filter value exist for a BAdI in code?

Hi all,
Scenario:
I created a BAdI. There will be a button on the UI to call its implementation(s); while if there is no implementation with specified filter value, this button needs to be hidden. Thus I need to know if the implementation exist before calling it.
Question:
In the ABAP code, how to get whether implementation with specified filter value exists for a BAdI?
If it's possible, please help provide code.
Thanks and regards,
Said

Problem solved:
data: r_badi type ref to YOUR_BADI,
          badi_impl_num type i.
get badi r_badi
    filters
      flt_name = fit_val.
badi_impl_num = cl_badi_query=>number_of_implementations( badi = r_badi ).
if badi_impl_num > 0.
    "there are badi implementation(s)
endif.

How do I specify different emails for a form to send to based on different selections?

How do I specify different emails for a form to send to based on different selections?
Creating a form that can be sent to an email address is simple enoug but my problem I can't figure out. There is a drop down menu on the form and based on what the user selects the form will be sent to 1 of 3 groups of email addresses. How can I specify which group of email addresses belong to a particular dropdown menu selection?

You can populate the drop down with a dataprovider that has the dropdown field and the emailgroup field.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.events.FlexEvent;
      import mx.collections.ArrayCollection;
      [Bindable] private var dataAC:ArrayCollection = new ArrayCollection([
        {label: "one", email: "[email protected]"},
        {label: "two", email: "[email protected]"},
        {label: "three", email: "[email protected]"},
      private function changeFunc(evt:FlexEvent):void{
        txt.text = evt.currentTarget.selectedItem.email;
    ]]>
</mx:Script>
<mx:ComboBox id="cmbx" dataProvider="{dataAC}" valueCommit="changeFunc(event)"
    labelField="label" creationComplete="cmbx.selectedIndex=0"/>
<mx:Text id="txt"/>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

How to insert a table with variable rows in smart form

Hi all,
How to insert a table with variable rows in smart form?
Any help would be appreciated.
Regards,
Mahesh.

Hi,
Right click the mouse->create->table
If you want 5 columns, you need to declare 5 cells in one line type of the table
Click on Table -> Details, then do the following
Line Type 1 2 3 4 5
L1 2mm 3mm etc
Here specify the width of the columns as many as you want..
then in the header/main area of the table, click create Table Line, Rowtype is L1, automatically 5 cells will come,In each cell create a text element, display the variable to be printed there.

Specifying table with jdbc-class-map-name

Greetings
How do I specify the name of the table to map to when using the jdbc-
class-map-name hint?
In my jdo file, I have specified:
<class name="Customer" objectid-class="CustomerId">
<extension vendor-name="kodo" key="jdbc-class-map-name" value="base">
<extension vendor-name="kodo" key="table" value="PERSONS"/>
</extension>
but when mappingtool generates the mapping file, the "table" hint
is ignored, and I end up with the following in the .mapping file:
<class name="Customer">
<jdbc-class-map type="base" table="FRED.CUSTOMER"/>
What I really want to see in the above jdbc-class-map is:
table="FRED.PERSONS"
I am using the property setting: kodo.jdbc.Schemas: FRED
Note that mapping fields to columns using jdbc-field-map-name
seems to work fine...
Any clues? Thanks.
droo.

You can't specify table or column names via mapping tool hints. The
typical way to change the default names is either to override the
getValidTableName/getValidColumnName methods in a custom DBDictionary
for systematic changes, or to follow the process outlined in example 7.6
on this page:
http://www.solarmetric.com/Software/Documentation/latest/docs/ref_guide_mapping.html#ref_guide_mapping_mappingtool_examples

How can I use TrueSequenceFactory with multiple sequences

In the post "How to use existing Oracle sequences using KODO" answered
by Marc Prud'hommeaux a "sample code" was given. But seems to me that
example will only work with a single Oracle sequence for the entire
system. Is this right?
How can I use TrueSequenceFactory with primary-keys and their
respective existing sequences? Can you (SolarMetric guys) provide me a
sample code?

The problem is that you are using application-identity. When you
specify an objectid-class, we treat is automatically as application
identity. To resolve this, I would recommend removing both the
objectid-class and identity-type atributes from your class. With
"objectid-class" in place, we asssume that you wil take care of identity.
Eduardo Bobsin Machado wrote:
I'm using Kodo 2.4.0, Oracle 9i, JBoss 3.0.4, the Kodo jars are in the
JBoss' lib/ext.
Well, I'll show what I have...
This is the script of my table:
CREATE TABLE LINEUP_VOYAGE (
VOYAGEID NUMBER (10) NOT NULL,
VESSEL_NAME VARCHAR2 (1000) NOT NULL,
CONSTRAINT PK_LINEUP_VOYAGE
PRIMARY KEY ( VOYAGEID ) ) ;
This is an excerpt of my .jdo file:
<class name="LineupVoyage" objectid-class="LineupVoyageId"
identity-type="datastore">
<extension vendor-name="kodo" key="table" value="LINEUP_VOYAGE"/>
<extension vendor-name="kodo" key="sequence"
value="LINEUP_VOYAGEID_SEQ"/>
<extension vendor-name="kodo" key="pk-column" value="VOYAGEID"/>
<extension vendor-name="kodo" key="lock-column" value="none"/>
<extension vendor-name="kodo" key="class-column" value="none"/>
<field name="vesselName">
<extension vendor-name="kodo" key="data-column"
value="VESSEL_NAME"/>
</field>

</class>
As you can see, the "id" field is commented.
And this is my class:
package br.com.fertimport.entity;
import java.util.*;
public class LineupVoyage {
     private String vesselName;
//     private long id;
//     public LineupVoyage(long id) { this.id = id; }
//     public long getId() { return id; }
//     public void setId(long id) { this.id = id; }
     public String getVesselName() { return vesselName; }
     public void setVesselName (String vesselName) { this.vesselName =
vesselName; }
The "id" attribute is commented.
Now the questions...
To use ClassSequenceFactory must the identity-type of my entities be
application or datastore?
Is the "objectid-class" parameter required in this case?
As you see, all references to the "id" property are commented. Can I
use this property to represent my object id?
If not, how can I identify my object with something like a long?
The last question is related to my architecture: one VM with the EJBs
(entity and session) and another VM with the web classes and JSPs,
connected by a session facade. I don't want to use any Kodo or JDO stuff
in the web tier. Is this possible?
Stephen Kim
[email protected]
SolarMetric, Inc.
http://www.solarmetric.com

How do I specify handleTransactionsManuallyForSybaseJConnect with 1003DP2?

Similar Messages

Maybe you are looking for