How Do I Specify No Cache With HTTPMultiservice?

Exactly how would I specify no caching of an SWF file using HTTPMultiservice? For example, you can do it using URLRequest with the code below. Is there a way to do it with HTTPMultiservice:
var loader:URLLoader = new URLLoader();
var request:URLRequest = new URLRequest(whatever url);
request.requestHeaders.push(new URLRequestHeader("pragma", "no-cache"));
request.requestHeaders.push(new URLRequestHeader("Expires", "Thu, 01 Jan 1970 00:00:00 GMT, -1"));
request.requestHeaders.push(new URLRequestHeader("Cache-Control", "no-cache, no-store, must-revalidate"));
loader.load(request);

Ok eventually I tried this:
operation.headers = {"meta http-equiv":"Cache-Control", content:"no-cache"};
And I got the following error:
Error# 2096: The http request header meta http-equiv cannot be set via Actionscript. null.
Which maybe it means worked, but you can't do it I guess. Not sure.

Similar Messages

How do I specify exact corners with the rectangular selection tool?

Suppose I have an image 2000 pixels wide by 1000 pixels high. Pixel (0,0) is at the top left as you view the image. Using the rectangular selection tool, how can I specify an exact area to select? Say, for example, I want to select the area defined by (0,0), (100,0), (100,100) & (0,100), how would I do this?
I'm using Photoshop CS6 on a Mac with OSX 10.8.3.
Any help is appreciated.
Thanks,
Kevin H.

Mylenium,
33,406 posts! That's amazing. Thanks for your technique for specifying an exact selection size. I tried it out and it works, but is there a way to get the marquee to snap to the guides, as opposed to snapping to pixels. I can't quite get the marquee to fall exactly where I place the guides, at least not easily.
Here's a method I've come up with since posting my question. (I guess I should have tried harder to figure this out before asking the question.)
Figure out beforehand where you want the corners of the selection marquee to be.
Activate the rulers: View>Rulers or (Cmd-R.)
Set rulers to pixels: Photoshop>Preferences>Units&Rulers>Rulers>Pixels
Select the rectangular selection tool.
In the menu bar for the selection tool choose Style>Fixed Size. Then in the dimension boxes to the right of the Style button, type in the width and height you want for your selection, e.g. 200 by 100 pixels.
Zoom in on where you want the top left pixel of your selection to be. Zoom in enough to clearly see the pixel.
With the selection tool active, click-and-release on the pixel you have zoomed in on.
Go back to normal view (Cmd-0) and you should see your entire selection.
This answers my own question, and with your method I now have two ways to do this.
Thanks,
Kevin H.

How do you specify a string with advanced-balance url?

I am trying to configure a CSS 11501 to send requests with a specific string in the URL to a specific server. How and where I would specify the string? The documentation, as far as I can tell, mentions that it can be done but does not show how. Any input is greatly appreciated.

Thanks again, Syed. Now it makes sense, but I was digging more into the documentation and found a simpler way to accomplish this.
service webServer1
ip address 10.1.1.1
keepalive type http
active
service webServer2
ip address 10.1.1.2
keepalive type http
active
content webServers
add service webServer1
add service webServer2
balance aca
vip address 10.2.2.1
protocol tcp
active
content fileServer
add service webServer1
vip address 10.2.2.1
protocol tcp
url â/files/*â
active
The idea being that most requests will get load-balanced between both web servers, but if the URL starts with "/files/", then only webServer1 will receive the requests.

How do I sync Toplink Cache with my Database?

Hey guys,
We are running macro's through an excel sheet that connects to the database and performs Updates and Inserts.
Since this database update is NOT taking place through TopLink (in a Unit of Work) - we do not see the database changes through the web app on the front end unless we bounce our webserver. Presumably the Toplink cache is re-built on start up...so then we can see the changes.
My question is, what can I do to make sure the TopLink cache is aware of the database changes we have made through the macro without having to bounce the server? Is there a re-fresh or sync command that can be run?
This task is sort of a one time thing, so I don't want a solution that involves the cache going to sync itself on a schedule or anything like that. Maybe bouncing is the best solution?
Thoughts?
We are using Toplink 9.0.4
Thanks.

Hello,
Because it is a one time thing, if you can make sure no other TopLink process are going on, you can probably get away with initializeAllIdentityMaps() or the intitializeIdentityMap(Class) methods on the session. These will clear the identity maps, having the obvious draw back of removing all object identity which will cause problems with running processes though. It might be better than bouncing the server - it depends on the application. Logging out of the session and logging back in has the same effect of clearing the cache, but with a bit more overhead. Benifit is that running processes will get errors if they continue to use the session, rather than strange behaviior if they continue to use objects after identity is lost.
Another alternative is to run refresh queries on the data you know might be in the cache or that might have been affected. Drawbacks are that this brings them into the cache if they are not already there.
TopLink 9.0.4 is a quire a few versions back, and in newer versions there is cache invalidation. An object marked as invalid is not removed, so object identity is maintained, but on the next query the data will be refreshed - ensuring subsequent queries will get results from the database without having to be told explicietly to refresh or being set to always refresh. Invalidation can be triggered on particular objects, classes or the entire cache or different policies can be set to set a time to live etc.
Except for bouncing the server or logging out of the session, all of the above leave some possibility that a concurrent user will still have a reference to stale data and continue to use it after the process has run on the database. So I hope you use optimistic locking and that your batch process updates the version to avoid other process from overwriting with stale data.
Best Regards,
Chris

How to config a shared cache for multiple environments with C API

How to config a shared cache for multiple environments with C API? Just like Java edition. Chapter 2. Database Environments
I want to open large number of databases, at least 10,000. But as the counts of databases opened increase, the db->open operation become very slow. It almost cost 2 hours to 10,000 databases.
So I try to distribute these databases to multiple environments ( for example, 5 envs ). And in order to improve the efficient of memory use, I want to share cache between envs.

Hi,
It is not clear what you meaning about multiple environments. Do you mean these environments are in different directories or in the same directory ? If you mean environments in different dirs share the same cache, it is interesting why you need that.
If you do not use DB_PRIVATE to open the environment, the created cache will be on disk, in the environment directory, so it can be shared by multiple processes and multiple threads. Currently, the cache file is in the environment directory, and we do not support specifying a separate directory for cache only.
Regards,
Oracle Berkeley DB.

How to query which Tcodes specified user used with one day?

Hi guys:
How to query which Tcodes specified user used with one day?

Hi
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Regards
Sumit Jain
[reward with points if the answer is useful]

How do you specify a line number with getline() (c++)

How do you specify which line for getline() to read with c++ similiar to how awk uses $1, $2, $3 , etc etc...
Example:(Ignore the underscores)
Line1 Line2
10____10
20____20
30____30
40____40
if I were making a program to remove 10 on the first line and 20 on the second line how would I tell getline which line to read
Example source code:
#include <cstdio>
#include <fstream>
#include <string>
#include <iostream>
using namespace std;
int main()
string line;
string line2;
ifstream in("/Users/lundquisted/Desktop/infile.txt");
ofstream out("/Users/lundquisted/Desktop/outfile.txt");
while( getline(in,line) )
if(line != "10")
out << line << endl;
while (getline(in,line2) )
if(line2 != "20")
out << line2 << endl;
in.close();
out.close();
remove("/Users/lundquisted/Desktop/infile.txt");
rename("/Users/lundquisted/Desktop/outfile.txt","/Users/lundquisted/Desktop/inf ile.txt");
return 0;
}

Eric Lundquist wrote:
store the output of a system() command within a c++ program to a string and/or variable
A number of apps call Unix utilities and capture both stdout and stderr, typically for viewing in a log window, but for other uses as well. Xcode, for example, starts up gcc and does various things with the text that gcc might otherwise print in a Terminal window. Most apps that rely on Unix commands that way don't use "system()", which is a rather crude way of launching utilities that leaves the parent program with very little control. Usually, the best way to manage helper utils from a Cocoa app is by using NSTask and NSPipe. If you spend some time with the two following pages, you'll learn how to do almost anything you want with command line utils from inside a Cocoa app:
[http://www.cocoadevcentral.com/articles/000025.php]
[http://macosx.com/forums/archive/t-3927.html]
The first link goes to a great tutorial on using NSTask. Capturing stdout and stderr are only covered briefly towards the end, however. Note the last comment explaining why "system()" is a bad idea.
The second link goes to a forum thread. Scroll down to the code posted by "blb" for some very clear examples of launching with NSTask and reading the output with NSPipe.
If you really want to use a shell command, you could give NSTask a command like ' +bash -c "ls -lt | grep drwx"+ ' (see how setArguments: is used in the tutorial).
If you just want to do something cheap and dirty with "system()" so you can see some awk output while you're learning how to do things the right way, I guess you could do something like this:
system(" cat ~/random.txt | awk '{print $2}' > MyFile.txt");
NSString *myString = [NSString stringWithContentsOfFile:@"MyFile.txt"
encoding:NSUTF8StringEncoding error:nil];
Of course you can just read MyFile.txt into cin if you're not using Cocoa.
- Ray

How do I generate a pulse with a user specified puse duration, down time and repitition, and then out put to a graph?

How do I generate a pulse with a user specified puse duration, down time and repitition, and then out put to a graph and then to daq ports?
I used lab view in engineering class, but that was the extent of my usage and after fiddling around in lab view and looking on the web looking for solution, I could not produce desired results. My professor wants me to produce something that will output a pulse for a specified duration, then downtime for another specified duration and then repeat the process a specified amount of times.
I am using labview version 7.1
Thanks in advance.

Hello,
Are you using hardware (DAQ card) to generate this pulse or are you planning on doing this all in software. If you have a DAQ card in LabVIEW you can go to Help » Find Examples and then select Hardware Input and Output » DAQmx » Generating Digital Pulses » Gen Dig Pulse Train-Finite.vi. This will use a counter from your DAQ card to generate a finite number of pulses at a specified frequency and duty cycle. Give this a try, or let me know if you are not using hardware, and we can figure something else out.
Regards,

How Can i specify multiple server names in rwservlet.properties file?

How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to load unicode data files with fixed records lengths?

Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.

Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

How Do I Specify No Cache With HTTPMultiservice?

Similar Messages

Maybe you are looking for