How do I suppress RTS?

Using Windows2000, Labview 6.1, serial driver V1.45:
I need to interface with a low noise amplifier which uses asserted DTR(+) and suppressed RTS(-) to power an isolated RS-232 interface. With no handshake enabled, your serial initilize VI asserts RTS when asserting DTR.
The control I need is achieved in BASIC as:
10 OPEN "COM1:9600,N,8,1,RS,...
How do I achieve this in Labview?

Hello-
The control lines can be modified by a VISA Property Node. The control lines are in Properties>>Modem Line Settings. It might be necessary to right-click on the node and click "change to write".
Randy Solomonson
Application Engineer
National Instruments

Similar Messages

How can i suppress columns in ALV ?? Will reward points.

Hello Gurus, how can i suppress column in ALV when i`m using the transparent table:
CALL METHOD grid->set_table_for_first_display
      EXPORTING
        i_structure_name = 'ZIANEXE'
        is_layout        = wa_layout
        is_variant       = wa_variant
        i_save           = 'U'
        IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
      CHANGING
        it_outtab        = itab[]
        it_fieldcatalog = fieldcat.
Please help.

in the fieldcatalog you are providing there is a field NO_OUT use this.
Loop over internal table and check fieldname. If fieldname = column you want to hide, NO_OUT = 'X'.
Edited by: Micky Oestreich on May 8, 2008 12:06 PM

Restoring new mini from icloud backup: how do you suppress multiple itunes accounts

I am setting up my wife's mini. We backed up her iPad gen 3 to iCloud. When setting up mini from icloud it askes for passwords for iTunes accounts belonging to son and daughter. They used their accounts to load apps fr me on my iPad. I do not have their passwords. How do I suppress the accounts on iPad so it does not try to retstore the apps they bought for me. Thanks.

Your title and the text in the post say two different things.
Your title says you are restoring from an iCloud backup.
Your post says you are doing an "iCloud installation". Admittedly, I don't know exactly what that means.
Please describe the exact symptom(s) you are observing, and whether whatever activity that is under way is providing evidence of proceeding.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

When I have two clips, one above the other, I would like to hear the audio from one at a time. How do I suppress temporarily one of that, in a easier way? Thank you.

I would think you would drop down the audio level lines in the "Stereo" tab (FCP 6.0.6 view to me) in the clip's video window.
But then again, in my old version, I can't play two clips at once. But I figure if the newer FCP allow you to do that, then that's what I would do.

How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page

How do you suppress page numbers. I am trying to print a screenplay for the first time since switching to Pages and I can't suppress Page #1 without making the rest of the pages inaccurate, as page #1 is the Title Page. Does anyone have any suggestions?

When you signed to be able to post in the forums, you were urged to read and accept the Terms of Use ruling these forums.
They claim :
The contents of the "More Like This" box prove that applying the rules you would have get the wanted explanations without creating this new thread.
Yvan KOENIG (VALLAURIS, France) mardi 26 avril 2011 10:04:03

How do I suppress the Font Mapping alert?

How do I suppress the Font Mapping alert?
We're using a Font Library fla, and the alert blocks the compiler, which blocks our build.
Let's say you have main.fla and fonts.fla. Main.fla doesn't have the font included in it (we don't want to bloat it). But this causes the Font Mapping dialog to come up.
Because it requires user interaction, this blocks our build from running.
Please advise.
Thanks,
Casey

Hi Casey,
Would you mind reposting this question over on the Flash Professional forums (http://adobe.ly/XnCf1)? This forum is primarily for end users, the Pro forums will get you in touch with a wider developer audience.
Thanks,
Chris

How do I suppress the "Outdated Java Runtime Environment" message?

Hi,
Does anyone know how I can suppress this "Outdated Java Runtime Environment" message?
I'm currently running 1.4.2.12 alongside the latest version of 1.6.x
Each time I start an applet coded to run with 1.4.2.12 a security warning appears titled "Outdated Java Runtime Environment" saying that:
"A Java applet in this webpage requires the Java Runtime Envronment (JRE 1.4.2 to run. You have JRE 1.4.2 installed, but not the latest release. Using an old release may present security risks. Do you want to run the applet anyway?"
YES / NO
I don't want to upgrade to 1.4.2.19 and this problem will occur again is 1.4.2.20 arrvies...
So how can I suppress this warning message?
I can't see anything in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy that can be turned off.
I've tried the obvious:
EnableAutoUpdateCheck = 0
EnaleJavaUpdate = 0
Update schedule = 0
In fact, everything under "Policy" has been set to "0"
Any ideas? Is there an unknown registry switch or something that can be added to the startup script that turns off this version/security check?
Any advice would be useful.

While looking for something else, I accidentally found the following message:
[t-5253971]
The 3rd post in that thread (i.e. the 2nd reply) claims to have an answer. I haven't tried it (though if you do try it I would be interested to know if it works).

TS3276 When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

When responding to an email, how do I suppress the "line" that appears on the left side of the originations email text?

Would you post a screen shot of a message so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
Screen shots

How do yo suppress interference from background processes?

When you're recording, or even playing back, how do you suppress messages from the internet, upgrade notices and other processes that might interfere with Logic? Can you just unplug your modem? If you do that, will you get a lot of error messages?

Apple has trained it's users to update all the time when in fact, it's rarely (if ever) that urgent. If you had been on this forum for a couple of years you would find that Automatic updates have cause a host or problems.
At this point in time the most efficient OS for audio recording is Snow Leopard, at least it's the one that's caused most users the least amount of problems and seems to be the most efficient.
If audio recording (and Logic) is important to you, leave auto-update on manual and check once a month, if there's important updates check on the forum to see if they've caused other users problems.
Think a little outside the box, Apple doesn't always know what's best for pro apps.
Definitely shut down any virus protection.

Why does Firefox open with both my Homepage and the 'Welcome to Firefox' tab, and how can I suppress the 'Welcome to Firefox' page?

When Firefox loads, both my Homepage and the 'Welcome to Firefox' pages open. How do I suppress the 'Welcome to Firefox' page/tab?

Hi Sean,
Try this:
# Type about:config in the address bar
# Click ''I'll be careful, I promise'' if prompted
# In the Filter input field type ''startup''
# Double click on startup.homepage_override_url
# Delete the text string and click ''OK''
# Close Firefox and reopen the window to verify that it has worked.
It's a bit more "technical" than most people want, but it should work.

How can i suppress zeros.

Hi,
i have one field cost. Type of that field is numc 10.
i have created one report for displaying the cost. So if cost is 8000 means it will display like 0000008000.
how can i suppress the zeros. please help me.
shyja

Hi,
Please use the below conversion exit to supress zero's.
CONVERSION_EXIT_ALPHA_OUTPUT
itab-matnr = '000001234'
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
INPUT = itab-matnr
IMPORTING
OUTPUT = itab-matnr.
here output would be only '1234'.
Thanks,
Murali

How can I suppress a message that remains stuck when I open my lap ?

How can I suppress a message that remains stuck when I open my lap ?

What sort of message?
Are you really still running 10.6.2, as noted in your profile? You really should update your system to 10.6.8 -> http://support.apple.com/kb/DL1399.
Clinton

How do I suppress error messages from displaying in GPIB calls?

I use GPIB Read and GPIB Write to access instruments on the bus. Both vi's supply status on error out.
I sometimes call these routines in situations where I do NOT want to reap error status, so I leave the error out terminal unconnected.
Here's the problem: I get error popups that display the GPIB errors (when there are some) even though I don't connect the error out terminals to simple error or general error.
How can I suppress the error messages??? I do NOT want them to display...
As always, thanks in advance for the assist!!!

PROBLEM SOLVED.
Thanks gentlemen. But... now I have to defend myself!
1. I have both old non-488.2 and newer 488.2 instruments on the same bus. When I send *IDN? to the old instruments, they generate errors. When I send model-specific (non 488.2) commands to the newer stuff, they sometimes error. I have to 'search' the bus and identify specific instruments (by mfg/model) that I'm looking for; I don't know what address they're at. So I go thru a loop (the index is the GPIB address) and for each address I try the old-style probe; if it fails, the new style; if neither succeeds, no one is home at that address. The problem is that in cases where I try the wrong probe for the device first, it frequent gets 'trapped' in the input buffer of that device causing it to incorrectly respond to its correct probe when I finally get to it. So I have to clear the device before sending it the probe to make sure its listening. Can't use *CLR since many devices don't recognize it; and since I can't send a command (yet) because the device is screwed up. So.... I figured out what I have to do to get the devices listening. The NEAT-3xx controllers are happy *after* they receive a null command with a LF (EOS) character - but they generate errors while processing the digital enema just described. The HP spectrum analyzers I use work fine when they get *IDN?, but generate an error on the bus when they receive the probe designed to get the NEAT controller to respond. So what I do is always send an EOS character first to each address before each probe - and then issue a GPIB read. I ignore the errors generated, and the data returned. Then when I probe, I always get a good response (if the probe type matches the device!) instead of an artifact from the garbage the instrument had to listen to. It's like drinking a beer after your wife calls you and nags - it clears your head and makes you ready to move forward. So now you know why sometimes I wanna ignore errors, but thanks for asking.
2. Why don't I use VISA? Well, find me a VISA driver for the NEAT-3xx family of controllers, and I will... I use raw GPIB reads/writes (and nothing else) in my 'scan the bus and probe each address' loop described above. I use raw GPIB commands for the NEAT controllers, and VISA for the HP. You guys designed this stuff, not me... What I don't know (and what you might help me with) is whether there's a 'raw' interface that allows you to talk to instruments using VISA calls when there is NOT a VISA driver for the device... kinda like "I wanna use the GPIB read/write, but use the VISA interface so all my code looks the same" deal...
Thanks again!

How do I suppress messages/loading bars from Import-Module and Import-PSSession?

Hello,
How do I suppress messages/loading bars from Import-Module and Import-PSSession?
I am writing a script that will be using these commands and it makes the script look clunky/scary to novice users.
Thank you for your time.

Sorry to bring this back up, but it seems that the ProgressPreference worked for Exchange, but it didn't affect the Active Directory progress bar. Any ideas why?
Strange, this worked just fine for me (no module loading indication):
PS C:\Users\mike.admin> $ProgressPreference = 'SilentlyContinue'
PS C:\Users\mike.admin> Get-ADUser mike.admin | Select Name
Name
mike.admin
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)
I do run the Import-Module command inside a function, but I doubt that would do it because I assume the preference is set scriptwide.
This will work anywhere.
$global:ProgressPreference='SilentlyContinue'
¯\_(ツ)_/¯

How can I suppress @ from prompting in a file when I run slqplus cmnd line

I should know this, but varied searches have come up with nothing :-(
I have a script myscript.sql which inserts data, mostly email addresses such as '[email protected]'. When I run this script command line for example:
sqlplus scott/tiger @myscript.sql
The script prompts me at every @ expecting an input param. How do I escape, ignore, suppress that? Each of the @'s in the file are already either in quotes or comment headers.

My bad, you're right - it wasn't the @, it was a completely munged script which dos-to-unix fixed. Although it was odd that I was getting prompted. I'm chalking it up to some weird anomaly. I'm returning to the Oracle world after a 2 year hiatus and dusting off the cobwebs...
Thanks -

How do I suppress RTS?

Similar Messages

Maybe you are looking for