How do see which t-codes users have been accessing ?

Hi folks
I have been asked to run a report by user name showing which t-codes have been used, say in the last 90 days.
Is this possible? Or is this information available in a table somewhere, If so what is the table name and key fields needed.
Layout would need to be something like:
User name
T-code Date Accessed Time Accessed
xxxx xx.xx.xxxx xx.xx.xx
Thanks for any advise.
Points awarded for helpful answers !
Regards
Steve
Edited by: Steven Lawrence on Jun 27, 2008 12:08 PM

Hi folks
Hi,
Transaction execution is histroy is not stored in any table, but it is only stored at server level in binary format. This file gets formatted when ever application server is Restarted.
You can access execution histroy data using STAT (upto 4.7) /STAD (above 4.7)

Similar Messages

How can I see which roles or users have access to a table?

How can I see which roles or users have access to a table?
For a given table, how can I see the grants, who and what?
Many thanks

dba_tab_privs.
Grantee can be a role or an user, as roles are fake users.
Sybrand Bakker
Senior Oracle DBA

How to select which RFC USERS have been accessed my host ?

Hi, guru
how to select which RFC USERS have been accessed my host ?
or how to record the RFC users's trace ?
because the auditor wants to know it.
Best regards,
Michael

how to select which RFC USERS have been accessed my host ?
did you check ST03N->User profile ?
or how to record the RFC users's trace ?
Check ST01 for system trace.

How to see which company codes are affected by a WT

Hello Community,
Hope you all are doing well, I would like to consult you because I have this situation, I want to know what company codes are affected by a particular WT in an specific country, is there any report or Transaction or do you know a way to do it? I tried by launching the WT report in a large period for country area with the wt that I want to check but the problem with this is that it may exclude a company code that can have the wt active but was not generated under the period. Please your assistance.
Thanks in advance for your time

Efrain,
Not exactly sure your requirement, however there is a transaction code PC00_M99_DKON which will show you the wage assignment. On the selection screen enter your country code as 10 if running for USA and the wage type. Execute it.
When you run it for a particular wage type and expand the results 'source system' then you will see the associated Company code for which the wage type is applicable.
Hope it helps you.
Thx,
Ashish

In SQL Trace how to see which statement getting more time .

Hi Expart,
In SQL Trace (T-code ST05) . I am running the standard transaction . how to see which statement
running more time and less time . suppose one statement running more time so how resolve the
performance .
Plz. reply me
Regards
Razz

> The ones in 'RED' color are the statement which are taking a lot of time and you need to
> optimise the same.
No, that is incorrect, the red ones show only the ones which need several hundret milliseconds in one execution. This can even be correct for hard tasks. And there are lots of problem, which you will not see
I have said everything here:
SQL trace:
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
Go to 'Tracelist' -> Summarize by SQL statements', this is the view which you want to see!
I summarizes all executions of the same statement.
There are even the checks explained, the slow ones are the one which need a lot of time per record!
See MinTime/Rec > 10.000 microseconds.
Check all number of records, executions, buffer, identicals.
The SE30 Tipps and Tricks will not help much.
Siegfried

How to query which Tcodes specified user used with one day?

Hi guys:
How to query which Tcodes specified user used with one day?

Hi
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Regards
Sumit Jain
[reward with points if the answer is useful]

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes??????

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes?

As jules says, your rate (currently at least) may be slow.
If it used to be good I wonder is your ISP is slowing ('throttling') your speed after you've used so many GB of a quota each day or month - check what they think you should be getting as a download speed.
While Apple's servers do occasionally play up, it's generally the ISP being slow not Apple.
If you're using Google's DNS servers that has caused issues for some.
Recommended speeds for near instant playback:
SD         2.5Mbps
720p      6 Mbps
1080p    8 Mbps
Is your speed test from somewhere like speedtest.net?
It might be helpful to post Mbps to ensure we/you are not confusing speeds by using different units to those measured.
AC

How to see the source code of procedure

how to see the sourse code of already created procedure or function

Select text
from all_source
where owner = '<Procedure owner>'
and type = 'PROCEDURE'
and name = '<Procedure name>'

How many users have been logged on by this month

I need to do a list of the users have been logged on by this month in the central instance and in the application servers. Someone can help me? I will apreciate your answers.
Best Regards.

Hi Reynaldo,
transaction SUIM > Users >users with complex selection criteria
Fill in the right parameters.
Regards,
Jeff

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

Getting S.M.A.R.T. when trying to install Mountain lion. Hard drive works pretty well. I understand that many users have been facing the same issue. Has apple patched it yet?

I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity:          1 TB (1,000,204,886,016 bytes)
Model:          ST31000528ASQ
Revision:          AP24
Serial Number:                      6V***5JR
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Failing
<Edited By Host>

If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case.

How to check the sales orders that have been created with an Rebate Agreeme

Dear Experts,
Do you know how to check the sales orders that have been created with an Rebate Agreements?
Thanks!!

Hi Hoo Laa,
I have one way but little lengthy.
Rebate condition always appears in the billing document.
So 1st you extract the sales order list from Table VBAK.
once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
Now put that list in the table VBRK.
In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
It will show the result.
Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
Already said, Little lengthy
Regards,
MT

How to find which SAP Standard Objects r been modified wit a transport requ

Hi All,
Will u plz help me knowing "How to find which SAP Standard Objects r been modified wit a transport request imported" in general.
Wt i mean is how and where can v check the differences or modified ones.
Thanks All in Advance,
Malti

Hi Malti,
I have replied to your question elsewhere
Regards,
Siddhesh

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.

Good day BenithaK,
Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
Apple ID: What to do after you change your Apple ID - Apple Support
To change your iTunes billing information for either Apple ID account, follow the directions in this article -
iTunes 12 for Mac: Manage your iTunes Store account
Thanks for using Apple Support Communities.
Safe computing,
Brett L

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

How do see which t-codes users have been accessing ?

Similar Messages

Maybe you are looking for