How do you create a chart that resizes as table of data resizes

I have a table which has a variable number of constituents (for the x axis). I have a variable field that determines a matched look up from a much larger database and this populates a table which in turn feeds my chart. Only problem is at the moment the chart has to read data from a v large set of data to capture any eventuality - in this case the graph often has a large gap to the right when data isn't in the table.
Excel can get around this. Can Numbers?
Thanks.

You can filter your table so non-blank rows are hidden. The chart will then not include those rows.

Similar Messages

How do you create a PDF that shows up on the opening of an e-mail

I use to be abel to create a PDF that I could drag onto the desktop of an email and it would show up as part of the e-mail when opened as well as an attatchement. Is there an actual procedure for creating one or is it random? Sometimes it works sometimes it doesn't?

Yakandhurl wrote:
I use to be abel to create a PDF that I could drag onto the desktop of an email and it would show up as part of the e-mail when opened as well as an attatchement. Is there an actual procedure for creating one or is it random? Sometimes it works sometimes it doesn't?
There is no procedure. Whether it shows up or not is purely dependent on the receivers email application and their preferences.
As always, I suggest if you want to do something like that, you should create an HTML email. There's a bit more control although it isn't foolproof either.

How do you create a part that has two through holes with a single net connecting to both.

I attempted to create a part that contained 2 through holes with a copper strip between them so they would connect to a single net, but one of the holes (pin 2) gets rejected by Ultiboard as an unconnected entitiy. Is there a way to define the second hole (pin 2) in such a way as to mitigate the problem?
Thanks, Tod
Solved!
Go to Solution.

Hi
It is quite simple to do so:
when making the footprint, you just put your two TH pins where you need them. name them 1 and 2.
Then in Multisim, when making a new component with the component wizzard,in step 2 make a 1-pin component, and select your desired footprint(which has two pins).
thenin step 3, make/choose your 1-pin symbol.
In step 5 you can map the footprint to the symbol , just use both footprint pins for the same symbol pin.
When using it in your schematic, you'll see one pin, in the layout, there will be two pins connected together..
Good luck
stressed user..

How do you create a form that has user permissions per form field for different user?

I need to create a form that is used by multi people but each user needs to fill out different fields within the form. I need the first user to make selections from a list and save it to send to another (the selection fields then need to be locked). Then the other user checks one of the selections made by the first user and saves the document to send back to the first user. Not sure if this is possible. I would like the first form field selections not to even show as a highlighted field to the other user (like just be more like a text field). I want the document to be able to be used more than once. The list selections will change and need to be sent to the other user at least once a month or more. Has anyone done this?

There's no built-in way to do that, but it's probably doable using a custom-made script to hide and/or lock the fields.

How do you create Text Hover States - inDesign cs5 table of contents?

I cannot figure out how to create text hover states in the table of contents. I want it to act like a hyperlink on websites where you hover over a link and it changes color. Any ideas?

Hello,
This forum is for questions about Adobe FormsCentral (http://formscentral.adobe.com). Please re-post your question to the InDesign forum:
http://forums.adobe.com/community/indesign
Best of luck!
Rebecca

How do you create a calculation that automatically updates changes?

Hi all,
I am trying to create a calculation using subtraction. This is how it is set out:
KM
-KG
=Field1
-Field2
=GM (fluid)
Under the calculate tab for Field 1, I have written in the Simplified field notation:
KM-KG
And under the calculate tab for =GM (fluid), I have written in the Simplified field notation:
Field1-Field2
And this all works perfectly providing I don't change any of the totals in the KM or KG or Field2 fields.
If I make changes in those fields they don't automatically update.
How do I make them automatically update?
Any assistance would be hugely appreciated.
Many thanks.
Bridie

To set the field calculation order, first go into form editing mode (Tools > Forms > Edit) and then: Tasks > Other Tasks > Edit Fields > Set Field Calculation Order
Order the fields in the list to whatever makes sense for your form. Be sure to do this again once you have the form working like you want to make sure it's still set up correctly.

How do i create a chart that will update in keynotes or pages from numbers?

I created a table in Numbers and want to export it to Pages and Keynote. I want the changes made in Numbers to Show in Pages and Keynotes.

Hi edwill,
In iWork, I don't know of a way to link between documents. If you are looking for a way to update a Pages or Keynote document automatically when you update a Numbers document, I don't think that is possible. Perhaps someone who is an AppleScript guru can call in to help you.
Regards,
Ian.

How do You create menu buttons that move up and down with a remote?

I have six menu items that are linked to their proper locations. When I simulated it a Hand moves over the proper choice then when I click there we go.
But on the DVD simulator you can't navigate. I thought maybe I would bring in one of the templates to use their buttons I can't get my images to replace theirs. Any help appreciated.
Jerome

Take a look here to make sure buttons are being set properly
http://dvdstepbystep.com/buttons07m.php
And download the movie if you like
I create a button, then set the text and include highlights
I then create another button, then set the text and the include highlights
I then click on the menu and go to the inspector to see colors
RED Normal
BLUE Selected
YELLOW Activated
In simulater I then use the remote control and CANNOT navigate through the buttons
I stop Simulator and then use Auto Assign Buttons Now Command, then relaunch Simulator and get the remote control to work
Make sure to link the button to the track you want to go to.
I thought the issue is that you cannot navigate the buttons with the remote control? If you only have one button on the screen, it will always be selected (Yellow in your project as described)
If it is flashing Megenta and nothing happens, it means a target has not been set (or somehow you are targeting the menu again)
So the only two condiitions you will see is yellow or magenta.

How do you create a shot that has several different video "layers"?

I saw an episode of Workaholics where Adam stays up all night and there is a part where he is sitting on the kitchen floor but there is a "second" Adam running around the house at the same time. I would like to try and recreate this but I'm new to Premiere and I don't know the exact terminology that would explain this better. For reference, it is episode 12 "telamerican horror story" of season 3.
Thanks!

That scene could be a problem.
The guy through the doorway is easy as is one of the two guys at the refridgerator.
But as soon as one of those two guys crosses the other, a 30 minute edit just became an hour of pain and suffering, or more, to edit each and every frame individually. If you are practiced at it, then fine. Otherwise, plan to devote an hour per frame for the first few frames.
Also, when you shoot the scene, you must, I repeat, MUST have your lighting under control. No sunshine, no stars, no Moon, nothing external coming in anywhere. Otherwise, if your lighting changes, you will spend a LOT of time fixing it, and it still won't be perfect.
One other thing. Your tripod has to be very sturdy and locked down absolutely tight. The slightest movement will completely ruin the scene.
However, with proper lighting, a steady tripod, and an actor/actress who hits their marks and never crosses over the boundaries between characters, it is a pretty easy job to get two, three, or even more instances done in just a few minutes.

How do you create flow chart in Photoshop?

I am trying to make a massive flowchart in Photoshop but connecting the arrows, lines, etc is a total pain in the butt. Is there a template, or a better way to do it? It is very easy in excel, power point and so on. Any help would be greatly appreciated. Thanks.

For clean illustrations you'll need a vector graphics program.
Adobe Illustrator comes into mind, but until some time ago a line with arrow
appeared longer by arrow length than the line without arrow....a really idiotic
behaviour.
Better use InDesign. This programm is probably not intended for these graphics,
but for me it's really very pleasant (if you redefine a plain line as a line with arrow,
then the line keeps it's length).
There are all necessary features, lines with different arrows, stroked or/and filled
boxes, typographical text in vector quality, grouping etc. etc.
Here's an example:
http://docs-hoffmann.de/cmsflow03072013.pdf
My suggestion is based on a quiet workflow, doing everything manually, besides
group, copy and paste.
Best regards --Gernot Hoffmann

Acrobat 9 - how do you create a dynamic stamp to include the current date (java script)

I have seen my question multiple places and times but the resolutions provided have not worked for me.
I am running Acrobat 9 Pro, cannot run X or XI due to the use of ProSystem fx Engagement.
I want to create what I thought would be a simple stamp. My initials and the current date. i.e. "crm 01/10/13".
Simple right? I created a PDF of my initials. Now I just need the text field with the proper Java Script to insert the date, correct?
I have tried opening "Dynamic.pdf" and copying and pasting the text field that includes the Java Script:
" event.value = (new Date()).toString(); AFDate_FormatEx("h:MM tt, mmm dd, yyyy"); "
The date does not update, it stays static.
I have manually entered the Java Script.
I have edited the Java Script to remove the "Ex".
I have edited the Java Script to revise the "yyyy" to "yy".
I have edited the Java Script to remove the " h:MM tt, " trying different formats to get "dd/mm/yy".
I have selected "Use single-key accelerators to access tools" in Preferences/General.
I have tried PDF files, PNG files. I have created the image files from Word and Excel.
I am at my wits' end. Can someone PLEASE assist me to resolve what should be a simple issue (I hope).
Thank you in advance.

Thank you for your response.
Your script works well, but I still have the same issue. The date is remaining static to the system date when the stamp is created. My initial idea was to create a pdf of my initials "crm" and then add the text field with the java script for the date behind my initials. "crm" + (TEXT FIELD with JS). I wanted 3 stamps, red, blue and green. The colors correspond to specific processes in our workflow.
Your script adds my initials as well as the date.
My machine is running Windows 7.
My stamps are located:
C://Documents/Acrobat Stamps/...
Acrobat templates:
C://Program Files (x86)/Adobe/Acrobat 9.0/Acrobat/plug_ins/Annotations/Stamps/ENU/...
I have no problem creating stamps, just a stamp that will use the current system date. I HATE using the typewriter for my initials and the date. I guess I can stamp my initials and then type the date...but what is the point?
Do you have any further thoughts or suggestions?
Thank you very much.
crm 01/11/13

How can I create 25 charts on a page, each chart 2 columns and 10 rows

I need to create a chart that has 25 tables. 5 tables in 5 columns. Each table has 2 columns and 10 rows. I know it can fit all on 1 page as I have seen it done but I can not figure out how

I had some initial difficulty understanding your question. In Numbers, a "chart" is a graph.
You want to create a 5 x 5 array of tables, each with two columns and 10 rows, placed on a single page.
At the default size, each cell on a new Table is 1 inch wide and 0.2 inches high. So without displaying a title, each of your 25 charts would occupy a two inch square space.
Butted closely together, that's a space that is 10 inches wide by 10 inches high.
On a machine set to US localization,the default page size is US Letter, placed in Landscape orientation. Left, right and top margins are set to 0.75", bottom margin is 0.5", and there is a 0.25" height reserved for page header and page footer.
That leaves a working space that's 9.5" wide and 6.75" high.
Obviously, some adjustments will be needed.
0.2" is pretty much the minimum for row height. You can go smaller by typing in a smaller height in the Table Inspector, but even with 9 point type, you begin to lose the descenders on ps and qs. Go with 0.2, then use the slider in Print view to further shrink the content.
If you can narrow the columns significantly (to 0.75" or less), then go to Page setup and change to Portrait orientation.
In the Sheet Inspector, decrease all margins to 0.5", and the header and footer spaces to 0. Set page orientation to Portrait.
Now consider the Table(s). If you've opened a new, blank document, you'll have a multi column, multi row table with one header row and one header column. If you don't need the header row and header column, delete them (column A, Row 1) right away.
Reduce the number of rows to 10 and the number of columns to 2. Select the whole table and, in the Table inspector, set the row height to 0.16" and the row width to 0.73".
With the table still selected. press command-D four times to create four duplicate tables.
Go View > Show Rulers, then View > Show Print View. go back to the Table Inspector and use the slider to set Content Scale to about 94%.
Drag the still selected Table to the right margin of the page. Press command-A to Select All.
Go Arrange > Align > Top
Go Arrange > Distribute Space > Horizontal.
With all five tables still selected, press command-D to duplicate the set.
Hold down the Shift key and press the left arrow once, then the down arrow 14 times. This should bring the new row of tables into line with the previous ones, and move them down the page to just below the first row of tables. If fine adjustment is needed, use the arrow keys with the shift key released.
Repeat three more times to add another three rows of tables.
Adjust the spacing between tables as necessary.
Regards,
Barry

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can"t find in any of the tutorials.

How do you create a link to a pdf in Muse? Thought it was going to show that with Katie's menu and can't find in any of the tutorials.

The steps would be :
- Add files from file menu > select pdf > add to site
- Select the content (rectangle,text etc) and click on hyperlink dropdown > it should show you the added files list
- Select the file you want to link
Thanks,
Sanjit

How do you create an interactive Keynote PDF on a MacBook Pro that can be downloaded and manipulated on an iPad.

How do you create an interactive Keynote PDF on a MacBook Pro that can be downloaded and manipulated on an iPad?

File > Export > PDF

How can you prevent encrypted folders that you created in disc utility from being deleted?

How can you prevent encrypted folders that you created in disc utility from being deleted?

bibst wrote:
How can you prevent encrypted folders that you created in disc utility
You cannot create encrypted folders in, or encrypt folders with, Disk Utility.
You can create with Disk Utility encrypted disk images from folders. I assume that's what you mean.
The proper way to do it is by setting the immutable bit. Read here
<http://www.thexlab.com/faqs/immutableflags.html>
about the immutable bits (and the trouble they sometimes create).
The user immutable bit (uchg) is the same as the Finder lock, as described above by X423424X. It's a weak lock, with only a warning.
The system immutable bit (schg) is more powerful. Once is set, the item cannot be deleted in Finder (even though Finder will ask for your password and may give you the impression that it can trash it; it will end with an error).
I set it in Terminal, thus
$ sudo chflags schg my_encrypted_disk_image
and unset it also in Terminal
$ sudo chflags noschg my_encrypted_disk_image
(Note that, when you unset the system immutable bit, the change won't be reflected immediately in Finder, but the item can be trashed nevertheless.)

How do you create a chart that resizes as table of data resizes

Similar Messages

Maybe you are looking for