How do you format cell size in numbers for multiple cells at the same time?

How do you format the cell size of multiple cells at once in numbers?

select the cells you want to format by clicking at the top-left most cell, then shift click the bottom-right most cell.
Then open the inspector by selecting the menu item "View > Show Inspector", then click the table inspector segment:
now use the row height and column width fields to adjust as needed.
You can also select multiple rows and columns by clicking in an active tables row/column header, then dragging to select rows (or column), then hover the cursor on the line the separates rows (or columns) until the cursor changes to a bar with arrows, then click, hold, and drag as needed.

Similar Messages

Import catalog numbers for multiple BP at the same time

I have to import different groups of the same catalog numbers for multiple business partners. I have been looking through the DTW templates and have not found it yet. Does this functionality exist and if so where would I find it? If not what to do, enter each one by one
thx,
Richard.

Hi,
I just looked at the available templates... I would use the oAlternateCatNum one.
Regards,
Eric

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

How can I see up AppStore/Software Updates for multiple computers using the same account?

I have several computers in my household which all use the same App Store account for purchases & software updates. How can I view all those installs while not being in front of all computers?
Recently an iMac crashed from a software update. I want to see what installed & crashed it.

Launch the Mac app store on the computer you want to update.
To use your Apple ID at the Mac App Store
Choose Store > Sign In from the App Store menu.
Enter your Apple ID and password, then click Sign In.
Then redownload Lion.

How do you watch and record a live h.264 stream at the same time using fmis and FMLE?

I've read all the similar post but could not find a solution that actually works, and please no "just use the dvr or record on the FMLE suggestions" as neither will work for me.
Some posts I've read suggest naming the stream in the FMLE to something like mp4:mystream.mp4 or mp4:mystream.f4v but then you can no longer view the stream, and according my the admin console the stream will not even publish using this syntax.
I can view the published stream if I name the FMLE stream to something like mystream.mp4 or just mystream, but then it doesn't record at all or records as a FLV file depending on how I code the main.asc file.
Here's one version of my main.asc, this one correctly publishes the live stream after the client triggers the joinStreams function but will not record it.
application.onConnect = function (client, userType)
    trace("userType is " + userType);
    this.acceptConnection(client);
    //this.clientCount++;
    client.joinStreams = function (channel)
        trace("joinStreams on channel " + channel);
        liveVid = Stream.get("livevideo/" + channel + ".mp4");
        liveVid.play("hdvideo/" + channel, -1, -1);
        liveVid.record("append");
    client.clearStream = function (channel)
        trace("clearStream on channel " + channel);
        liveVid = Stream.get("livevideo/" + channel + ".mp4");
        liveVid.play(false);
        delete liveVid;
I've been working on this for 48 hours straight, please advise.

I think lets keep it simple, will explain what you have for watching live streams and recorded streams
Live Publish and Play:
     FMLE Settings:
Video Codec: H.264
Audio Codec:<any of your choice>
Server URI : Please put your server uri with application name here , for example i will use "rtmp://myServer/myApp"
Stream name: livestream
    Subscriber Settings:
          Server URI : "rtmp://myServer/myApp"          Stream name: livestream
          Mode: "live" ( i.e. ns.play("livestream",-1,-1,true)
Playing VOD H.264 file:
     Subscriber settings:
          Server URI : "rtmp://myServer/myApp"
          Stream name: if file name is "sample", use "mp4:sample", if file name is sample.f4v, use "mp4:sample.f4v"
          Mode: "record" ( i.e. ns.play("mp4:sample.f4v",0,-1,true)
For DVR (Record-in-progress stream)
If you are using FMLE and want to use "Record" option of FMLE then you need to have to dvrcast_origin application and subscrier needs to FLVPlayback 2.5 component
If you want to use that option, do let me know i will give details later.
For now we will use simple server-side code and FMLE as publisher.
main.asc of "myApp"
application.onPublish = function(myclient,mystream){
     mystream.record();
application.onUnpublish = function(myclient,mystream){
     mystream.record(false);
FMLE Settings:
Video Codec: H.264
Audio Codec:<any of your choice>
Server URI : Please put your server uri with application name here , for example i will use "rtmp://myServer/myApp"
Stream name: mp4:mydvrstream.f4v
    Subscriber Settings:
          Server URI : "rtmp://myServer/myApp"          Stream name: mp4:mydvrstream.f4v
          Mode: "live" ( i.e. ns.play(" mp4:mydvrstream.f4v",0,-1,true)
Try out above and let me know if that works or does not work for you.

How to program for multiple tasks at the same time.

I want to start a data acq, then detect a level change in a switch which also corresponds to a visible timer starting. The timer will stop when one of three switches is closed. In the middle of this I would like for there to be a selectable (controllable/ adjustable) time delay andthen a signal is sent to one of three random lights. Can anyone please assist?

Ok, I took a shot at what I think you are trying to do. The attached VI monitors an analog signal. When the analog signal goes above 5V (could be easily modified for any level), the program pauses for a selectable amount of time, then writes to one of three randomly selected digital lines (the LEDs on my digital lines were reverse logic, so you might have to adjust the polarity). This will at least give you something to work with. Hope this helps!
-Alan A.
Attachments:
analog_in_one_dig_out.vi ‏111 KB

How do I edit or enter values on multiple sheets at the same time in Numbers? I can do this Excel but don't know procedure in Numbers. Thanks.

How do I edit or enter values on multiple sheets at the same time in Numbers? I can do it in Excel but I don't the procedure in Numbers. Thank you!

The only I way I can think of to modify a single value and have that value change in multipl locations is to have all "the other places" reference a single cell. There is not way without a referene to modify a set of cells simulateously.
This may be something like what you want:
Enter a value in the table "Original Data" cell A1 and the A1 cells of tables Ref1, Ref2 and Ref2-1 will change

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

How do you create aligned interactive text boxs in a PDF with the same width and height?

how do you create aligned interactive text boxs in a PDF with the same width and height?
Without free hand creating the sizing?

Assuming by "interactive text boxes" you mean form fields; in Acrobat, make a form field, then copy it and paste. (GIve the pasted copy a different name so they don't genetate the same field feedback.) Now you have two fields of the exact same size. Shift-click or marquee-drag to select both, then right-click and choose a command from the Align, Distribute or Center menu.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe …

How you create a group to send many txt msg at the same time?

How you create a group to send many txt msg at the same time?

The iPhone does not support groups for messaging. There are apps in the app store which purport to be able to do this.

How do you get FaceTime to work between two Mac's with the same email address? Thanks, Mike

How do you get FaceTime to work between two Mac's with the same email address?

I would like to know the same thing. How does facetime work between a MacBook Pro and an I Pad that run off the same email address/mac id

How can I install one app on multiple iPads at the same time?

We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

You can do a backup of you iPad then restore the backup to many devices.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
Mobile Device Management Solutions for iOS
http://www.apple.com/iphone/business/integration/mdm/
http://www.apple.com/ipad/business/resources/
"iOS mobile device management (MDM)
With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
http://jamfsoftware.com/products/casper-suite/

TS3280 How can i enable both paired bluetooth and ios keyboard input at the same time?

How can i enable both paired bluetooth and ios keyboard input at the same time?
This is needed for the app im working on. Need some user input via keypad as well as scanner input via a paired bluetooth scanner.

You probably should not be using a keyboard bluetooth profile for a scanner, I am not a developer for apple so do not know the location for you to find out the correct profile you should be using for an input device that is not a keyboard. Sorry,
I am sure if you navigate the apple developer site you will probaly finmd what you're looking for.
https://developer.apple.com

Can you opening multiple albums at the same time in Photo (not iPhoto)?

When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos.
You can't open multiple albums at the same time. You can create a smart album that will do essentially the same thing with the following criteria:
Album is "A"
Album is "B".
The smart album will display all of the photos in those two albums.

How do you format cell size in numbers for multiple cells at the same time?

Similar Messages

Maybe you are looking for