How do you set up a vpn connection using WVR200

Hey guys,
I'm new to this forum. I have the WVR200 vpn router at home and I want to be able to vpn to it from work so I can use radmin to remote control my laptop. I have the latest firmware and quickvpn software. I've messed around with it for a couple of days now and I'm surpriesed that it's this difficult to set up. I also havn't found very many documents regarding this router and the vpn setup process. Please help if you can.

Thanks for the reply! I have already read this document but maybe someone can help clear my understanding. I have a dsl wireless router/modem which is connected to my WVR200. The IP of the WVR200 is 192.168.1.1 and the IP of the DSL router/modem is 192.168.2.1. When I enter in the WAN IP(Server IP) into quick VPN I am getting confused as to which IP I should enter. I would think that either would work becasue they are connected to each other.
Also, do you have to set up a tunnel on the wvr200 web interface in order for it to work? In the instructions above it just says to create a vpn account and then click the vpn summary tab and it will show the tunnel information, but how can it, if you never even created one and it doesn't give the insructions too?

Similar Messages

How do you set up an FTP server using a NAS device?

I'm sure this question has been answered before. I run a small graphic design business from my home. Occassionly clients want to send me files and ask if I have an FTP site they can upload to. I recently purchased an NAS enclosure and added a 250 GB HD in it. It's hook up to a Linksys router. I can attach to it using the GO menu using "smb://STORAGE". It appears on the desktop. I have Comcast as my broadband service with a dynamic DNS. I have 2 folders on it, one password protected and the other a Public folder. I would like someone to be able to access the Public folder and upload and download files on it. Would someone be able to explain, in simple terms, how to set this up.

Well you actually need to have an ftp server running somewhere. I dont know (although i doubt it does) if your NAS has an embedded FTP or SFTP server. If it dosent youll actuall have to have people connect to one of your servers/workstations that has FTP enabled.
First youll need to log in to your router's admin panel and forward port 21 to the server/workstation that will function as the ftp server.
Then set up the mount for the NAS device at large or one of the specific folders on it with sharepoints or something on the mac that will act as the ftp server.
Set up a user as a FTP only user. Youll probably want to make this user only have FTP access (you can google or consult other threads in these forums for this procedure).
In this users home folder make symlinks to the shares with the command line:
cd pathto_ftpusers_homedir
ln -s /Volumes/NAS_Sharepoint NameOfFolderUserWillSee
Then create the file /etc/ftpchroot which will contain a list of users that will be limited to thier home directory when using ftp. i would use a command line text editor to do this (pico, vi, emacs... choose your poison).
the file should simply be a list of user shortnames, 1 per line.
Thats the basics of it. You can get more complicated and might indeed need to set up permissions and what not properly (youll probably want to use ACLS so you dont have to constantly change permissions or login as another user to access files that have been uploaded)but that should get you started i think.

2 iphone 5's, 1 itunes account to share music; how do you set up 2 icloud accounts using one MacBookPro?

My wife and I each purchased the iphone 5 and we share an itunes account. How do I sync our iphones to our MacBookPro so we each have our own iCloud account (contacts, calendars, etc.)? We want to be able to share the itunes music on our computer.

If you are sycing your contacts and calendars with iCloud, don't sync them with your computer using iTunes. If you sync with both iCloud and iTunes this will cause duplicates. If you want to keep your contacts, calendar, etc. separated rather than merged, be sure to set up separate iCloud accounts on both phones using different Apple IDs. You can continue to share the same Apple ID for purchasing music, apps, etc.; it does not need to be the same as the ID you use for iCloud, iMessage or other services.
In terms of syncing your music and other non-iCloud data with the same computer, this article will explain different options depending on how you want to set it up: http://support.apple.com/kb/HT1495.

How do you set up your server to use Adobe Drive (alfresco to Hyper-V)...

Hi,
We have been gradually using Adobe Illustrator CS6 in a team environment and, after having files on the server, found that we were stepping on one another i.e. losing work. The forum explained the pro's and con's of this arrangement; Adobe drive seemed to be the answer. However, there are constraints with this. The terms hyper-V and alfresco have come up, and getting the two to work is in question. Certainly there are companies out there who are using Illustrator in a team environment and I was wondering how you do it. Thanks so much.

Hello Julie.
Your junk filter appears to not be working properly. Try this first:
1. Go to Preferences > Junk Mail and disable junk mail filtering.
2. Quit Mail, then open it again.
3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
4. Reset the junk filter database (Preferences > Junk Mail > Reset).

How do you set the line spacing when using the Append Text Table to Report VI?

I have a table of numbers which I wish to print using the report generation VI's. Since each column has a different numerical format, I first convert the number for each cell to a string with the appropriate format and then build a string array to pass to the Append Text Table to Report VI. The table is printed with double line spacing. How do I reset this for single spacing?
Attachments:
print_array.vi ‏112 KB

Dave,
The issue is not with the NI-Reports functionality, but the Array to Spreadsheet String funvtion in the for loop. Here is the context help for this function:
"Converts an array of any dimension to a table in string form, containing tabs separating column elements, a platform-dependent EOL character separating rows, and, for arrays of three or more dimensions, headers separating pages."
The thing to note here is that it says it adds an EOL (end of line) character at the end of every row. This is what is happening. Your first column of data has a \r\n in it and adds the second row to each data item. This in turn makes the rest of the columns have a larege blank space at the bottom so that all of the cell heights are equal. I w
ould re-write that little bit of code so that you just do one large string concatenation of number, spaces, number, spaces, number and this should solve your issue.
Thank you for using the Developer Zone Discussion Forums.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

How do I set up a VPN on a MacBook Pro running Mountain Lion?

How do I set up a VPN on a MacBook Pro that is running Mountain Lion?

Open System Preferences and choose Network. In the left column, click the "+" to add a new interface. In the dialog that appears, name the service and choose the interface type VPN. The rest of the configuration details depends on the VPN settings of the server you are connecting to.
Hope that helps.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
The TC is a wireless backup device.. it does not need to be connected to the main router..
The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
Search ebay for wireless n usb.. Mac compatible..
http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
As you can see.. they are getting smaller and neater.
I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

How do you set up Communication between QuickBooks & Acrobat Pro X

How do you Set up your Acrobat Pro X Pdf Form to communicate with Intuit QuickBooks 10? Is there special formatting that is involved or is all in the field names? I have a detailed form that I would like to import the data into Quick Books but I seem to be running in circles and not a straight line. Can you help me in this matter?
Thank you in advance - Badgeteam

Hi,
We don't have Quickbooks, however having had a look here are some comments:
Acrobat (for Windows) has some Quickbook templates, which are already set up with a data connection to Quickbooks.
You should use these, as their structure is set up for you.
If you open Acrobat, there is an option for Quickbooks from the Forms menu.
When you select a template, you will be prompted to open this in LiveCycle Designer.
Once in LC Designer you can examine the objects and their binding (Object > Binding palette).
You will also notice that there is a script objects "QuickBooks" under variables in the hierarchy. It is highly unlikely that you will need to change anything here, I am just highlighting that it exists and again that it is better to use one of the templates.
As I don't have Quickbooks, I can't be of much help. There is more information available here:
http://help.adobe.com/en_US/Acrobat/9.0/3D/WS4E66C448-C5F3-444c-ACE4-778DE09A30B5.html
Good luck,
Niall

How do you set up TC with cable internet?

I know this may sound ******** but if I have a coaxial cable coming out of my wall and the is no coaxial cable input on the TC, how do you set it up without using the crappy router I got from TW cable? Is there a coaxial cable to ethernet adapter?

but if I have a coaxial cable coming out of my wall and the is no coaxial cable input on the TC, how do you set it up without using the crappy router I got from TW cable?
Suggest that you ask TW to provide you with a simple modem.....not a router. The TC is also a router. You don't need two routers and it just makes things more complicated.
Is there a coaxial cable to ethernet adapter?
No. You need to connect the coax cable to a modem. The modem provides an Ethernet signal to the TC.

How do you set up usb device (remote for ppt) to work with iPad2

How do you set up a USB Device (a remote) to work with an iPad 2? I have the digital camera connector but when I plug the remote in, the device is not recognizable. We are trying to run a slideshow on the iPad using the remote to advance the slides. Thus, the viewer does not have to swipe to advance to the next slide.

...I have the digital camera connector...
Simple answer: no, you can't use that remote with the iPad.
The Camera Connection Kit (CCK) is only for importing pictures. It is not a general purpose USB port so will not work with just any USB device, other than cameras and USB flash drives (but only to import pictures.)

How do you set up the passkey between the Mac & Palm?

Hi all,
I need help with a couple of things relating to bluetooth and Mac;
a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
thanks
iBook 1.2GHz Mac OS X (10.3.9)

Palm has this to say about the issue:
'Unable to initiate HotSync operation because the port is in use by another application.'
This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
Unable to initiate HotSync operation because the port is in use by another application.
Why does this happen?
Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
What should I do?
If you see this error, here's how to correct the issue:
1. Launch the HotSync application on your handheld.
2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
4. Do this every time you wish to synchronize using Cable/Cradle.
5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
http://www.palm.com/us/support/macintosh

How do you set up for AirPrint an HP110A wireless printer without a PC on a wifi network using a Verizon FIOS router)

Purchasing an HP110A wireless printer for my 85 year old father who has and Ipad
This pritner is fully compatible with Airplay per HP site
My dad has no PC
He knows the router passcode.
What is the process?
Will the HP printer to be purchased shortly work out of the box w/no drivers
How do you set the printer up to work on the iPad?

Richard-
I have the HP D110 AirPrint printer. As I recall, it was configured in Ad Hoc network mode when first received. It was necessary to set it up to access my WiFi router before I could use it with the internet connection. Then, as part of the setup process, it downloaded the latest firmware update from HP. This was all done from the printer control panel, and no PC was needed.
As Pvonk mentioned, your router must be able to correctly handle Bonjour data for iPad to print to an AirPrint printer. Go ahead and try it, it may work. If the iPad can't find the printer, you will need to contact Verizon for help in configuring the router or getting a different router that is compatible.
By now, you should realize that a PC is needed to update the iPad. I assume your Dad visits you when he needs use of a PC.
Fred

How do you set up a vpn connection using WVR200

Similar Messages

Maybe you are looking for