How does the copyright thing work when importing a song from iTunes to iMovie.
The song was purchased legally through iTunes but does that mean I can include it in a movie for personal use?
ffeuer wrote:
The song was purchased legally through iTunes but does that mean I can include it in a movie for personal use?
Absolutely not.
Well... define what you mean by "personal use".
Matt
Message was edited by: Matthew Morgan
Similar Messages
-
No audio when importing mpeg4 song from itunes
I have tried to import a song from itunes which turned out to be mpeg4 and not aiff. As a result the audio is not playing in FCP.
Is there anything I can do?
Thanks
G5 Quad Mac OS X (10.4.5) 4.5GB of Ram Quadro FX 4500 graphics cardYou may want to actually read the agreement you make with Apple and the iTunes store regarding the use of material acquired there. A song purchased from the iTunes store gives you the right to listen to it on up to 5 devices. It does not give you the right to utilize it in any syncronized video or other public display - whether or not money changes hands.
Have you negotiated the use rights with the artist already?
What VJK tells is technically correct it is also an illegal act. Let's put it this way - would it be OK for someone to take your work, use it for their purposes and maybe they credit or pay you later?
x -
How does the blend move work when the constant velocity profile is not reached?
Hi,
In my application I have to blend several moves with the same velocity and acceleration on only one axis.
In the LabView help it is said that "A blend factor of –1 causes the pending move to start when the existing move finishes its constant velocity segment and starts to decelerate, as shown in the following figure. "
However, if the trajectory parameters are such that the constant velocity segment is never reached (for instance, because during the acceleration segment the target positon is reached), how does the blend motion vi behave? I have looked everywhere and could not find an answer.
Can anyone help me on this?
Thank you in advance,
João Barata
Solved!
Go to Solution.Hi,
the blending starts as soon as the deceleration ramp starts. In the case that the constant velocity is never reached, the deceleration ramp starts exactly in the middle of the move (assuming that the values for acceleration and deceleration are the same), so you end up with a triangular velocity profile instead of a trpezoidal velocity profile. That means, it could never happen, that the target position is reached during the acceleration ramp.
I hope that helps,
Jochen Klier
National Instruments -
Does the computers DAC or the iPods DAC work when playing a song on iTunes?
In other words:
Which devices DAC is being used when playing a song on iTunes?
In other words:
When I connect an external DAC to my PC and play a song from my iPod on iTunes, which devices DAC is being used?iTunes does not "play a song from your iPod", only from the content of the iTunes library. Therefore, anything played in iTunes will make use of whatever audio processing components are in or attached to your PC. The iPod's DAC is used only for audio output by the iPod via its headphone jack (or, in some configurations, via the USB cable - e.g., for some in-car setups).
-
Does touch ID not work when redeeming gift cards from iTunes?
I thought the whole idea with touch id was not having to enter your long-*** passwords all the time?!? iTunes asked for my password when I try to redeem gift cards, instead of letting me use touch id. Is this the way its supposed to work?
I was having this issue too, it was always asking for the passcode even though the setting was on for iTunes & App Store. To fix it I turned it off and then back on again, it asked for my password and then it worked.
Steps:
- Go to Settings -> General -> Touch ID & Passcode -> Touch ID
- Disable iTunes & App Store
- Re-enable iTunes & App Store
- Enter your passcode one last time
- It should work
Also as others mentioned, under General -> Restrictions -> Require Password might need to be set to 15 minutes. -
How does the Delta functionality works while updating Infocube from PA
Hi Gurus
How does the Delta functionality works when you send forecast to the Info cube from the Planning Area.
As I have weekly based planning, every week we have to update the forecast into the Cube. If I update every week into the Cube , then the values are going to append in the Info cube.
Shall I create ODS in between the Planning area and the Info cube .
(or)
Any other method ?
Please Suggest.Hi Preetham,
Data Extraction from planning area to infocube usually its supports for full update only, when u r going to load the data from planning area to cube ,it deletes the previous data and u vil get the fresh data, this is the best method performance wise,
if u want to use the delta functionality u can go for planning area to Dso, Dso to cube, it vil supports the delta functionality, but it vil degrades the system performance,
regards
ravi -
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
How does the Passbook application work? How am I able to import my plane ticket, concert ticket etc into Passbook?
Try the following to fix the iTunes Can't Connect issue that you are having:
Open Settings.
Open General.
Open Date & Time.
Switch the Set Automatically setting to Off.
Open Set Date & Time.
Set the date to a year ahead.
Go back to the Home screen and open Passbook.
Tap the App Store button. The App Store should load.
Go back to Date & Time and turn on Set Automatically.
Thanks to: https://discussions.apple.com/message/19622208#19622208 -
Why does the mail not work when i updated my 5s to iOs 8?
why does the mail not work when i updated my 5s to iOs 8?
Thank you for the reply. But can you tell me what this configuration is about and how I should do this?
-
How does the .accept() method work?
Hi,
I have checked the source code of the ServerSocket implementation that comes with the jdk.
I tought I was going to find some type of loop. However I found nothing like that! so how does the accept method work.
I mean when we call the .accept() method, the thread in which the socketServer is initialized gets stoped untill a new client connection is recieved! how is this actually managed?
Regards,
Sim085At a guess, the accept call that Java makes, relies on the OS system call through JNI. accept would then block until a new connection is present if you are using blocking.
-
How does the Convert Command Work Under the Catalogue Manager?
How does the Convert Command Work Under the Catalogue Manager?
My suggestion would be that you download the pdf version of the organizer help file:
http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
Start with page 57 for catalogs.
I am sure you'll have a better understanding of backup/restore and converting when you understand what a catalog is.
Please come back with your questions afterward . -
How does the event structure work & ...
How does the event structure work & and how to modify the case example if you want to change the name of the case? I haven't a look at the manual but nothing about event structure is mentioned.
I know how it works.. =P
-
How does the notify() call work in Java?
Hi!
Can someone help me:
How does the notify() call work in Java?
H�varJava's Thread Tutorial
JavaWorld: Introduction to Java threads
IBM: Introduction to Java threads
Google: java+threads+tutorial -
How does the copy button work in safari for ipad (copy button under facebbok share button)?
On a website ...
Tap the Action icon bottom of that window. (white square with a right facing arrow) then tap Facebook.
You should see the following depending on the what content the website can share.
Copy / Mail / Message / Twitter / Print / Bookmark -
How does the newest Iphone work with Ford Sync?
How does the new Iphone work with Ford Sync? I was thinking of purchasing the 4s but may go elsewhere if there is a better phone for the equipment in my vehicle.
That would be a NO.. I should have done my homework before I switched to IPhone because the Bluetooth just does not want to sync with my Ford Truck. Its such an inconvience. But I see from other posts that Ford isn't the only car experiencing problems. So Hopefully Apple fixes this problem QUICKLY!
Maybe you are looking for
-
Return Vendor setup in Vendor Master
Hi All User creating a new vendor in company code 1000. when he check the "Return Vendor" system should create a custmoer as background process. But system issuing an error message that user not authorized to company code 2000. Why system is checkin
-
Determination of GL accounts from Main and Sub Transaction
Hi, I have configured main and sub transactions with associated G/L accounts. Is there any program/table through which I can find out the assciated G/L accounts which are already configured if I pass Main and Sub transactions.
-
Proposal for a sticky thread "Performance of SAP standard"
Hello, in this form there are many questions about your programs, selects function modules but what about the SAP standard programs, they are not always the best performing things on your system. What do you think about a thread with improvements of
-
When I try to update to the newest version of itunes it won't let me. Why?
When I try to update to the newest version of itunes it won't let me. Why?
-
HIJRI DATE TO GREGORIAN(NEW POST)
hi im trying to query this using sql. the table name of the column is TEST_DATE. with the following data HIJRI_DATE 17/11/1431 18/11/1431 19/11/1431 how can i convert this data to gregorian? in sql statement? THANKS