How I show only 20 rows per pages in a rtf report in BI Publisher 11g

I'm making a report and i want show only 20 rows per pages in a formatt RTF. I get this with anything as a xls, xslt....
I'm a new user....please . Any idea..???
Thank for all.
Edited by: 844565 on Mar 15, 2011 7:34 AM

Instead of doing that take the url CURRENT_SERVER_URL(pre-definde BI Publsiher variable) by declaring like below
<?param@begin:CURRENT_SERVER_URL?>
Then subsequently add the extra patameters eg. region like below
{$CURRENT_SERVER_URL}Data/Country.xdo&p_region={REGION} <- get this REGION value from XML
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies.

Similar Messages

SQL Report - PDF Report Printing. How to show one row per page?

Hello
I have successfully created a simple SQL Report.
Than I enabled Report Printing to PDF (default Report Layout).
Export to PDF is working good by default.
Now I want to see one report row per one PDF page. Is it possible?
How I can change the amount of rows per PDF page using default report layout?
I tried to create a User Layout with MSWord Plugin. it's quite suitable for data forms.
But I still did not find a way around for my question.

I would create an User Layout (.rtf) with MSWord. Load your XML data and use the table wizzard to put the fields in your document.
Put this code after your last field and before the 'E' (= <?end for-each?> tag):
<?split-by-page-break:?>

How to set number of rows in "Rows Per Page Selector" in Interactive Report

Hi Guys,
Is there any way to set the number of rows in "Rows Per Page Selector" in Interactive Report. By default it is set to 15.
I know one way is to change the number of rows when you are running the report and then set that as 'Default Report Setting'.
If anybody is aware of any other way, please let me know.
Cheers,
Ashish Agarwal
http://www.dbcon.com.sg

Hi Pavel,
can you please specify your question more clearly. If you are on NW 7.0 you can determine a number of colums for your filter item with following command:
COLUMNS
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
If you meant the amount of rows within the analysis item you can use following command within your analysis item:
BLOCK_ROWS_SIZE (numbers of rows displayed at once)
BLOCK_ROWS_STEP_SIZE (numbers of rows to be scrolled for one step)
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/76/489d39d342de00e10000000a11402f/content.htm
Brgds,
Marcel
Edited by: Marcel Landsfried on Feb 10, 2009 7:45 PM
Edited due to wrong url

Browser Only Shows 35 Rows per Page

I have a Business Exploder query that I display on the web. However, it only shows 35 pages at a time. Can I increase this to all rows? I don't see an option in the query properties, and I don't have access to any stylesheets.
Thanks.

For table web item, set the specific property - "Number of Data Rows displayed" to 0 (zero) This will show all of the records returned.
But be careful about large number of rows as browser will go for a spin. It does not stops as excel does for 6000 rows.

Set Maximum Rows Per Page not working

I want to display 50 rows per page and I tried the below but still I can see the default 15 rows per page.
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Maximum Rows Per Page
Set to = 50
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Rows Per Page Selector
Removed the check mark and still shows 15 rows per page.

Run your report. Set the Rows to 50. Press Go. Select 'Save Report' from the 'magic wheel' menu and next select 'Save as default report settings'.
It is a rather long way, but seems the only one...
Roel

NEXT button on report portlet shows 10 rows-maximum rows per page=9999

I created a report with the DB Provider portlet. I set the maximum rows per page to 9999 when displayed as a portlet and as a full page. I put the portlet on a page and it only shows 10 rows and then the next button.
If there are exactly 10 rows I get the next button. If I click it the next page loads with no data. If there are less than 10 rows there is no button.
If I create a new portlet it does not do this. I'm only having the problem with one portlet now but I've seen it in the past. I usually just build the portlet again but I would like to know how to fix it.
I can't customize the portlet because of bug #3467032.

Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

How do you get table column names to show one time per page

I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
Susie

I figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie

HOw to fix No of Rows per page in SSRS

HI,
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
Thanks in Advance.

I need to do 100 rows per page. I tried the technique above but I am still just getting about 16 rows per page. (I believe I followed the instructions correctly.)
I know...100 rows is a ton but the users want it (and, thus, my boss wants it). They only display the report; they do not print it.
Here is what I did...
1. Right click on the table
2. Select Properties
3. Select the Groups tab
4. Select Add...
5. Enter a group Name: "Group_for_PageBreak" (I have no other groups)
6. Enter an expression: =Ceiling(RowNumber(Nothing)/100)
7. Uncheck "Include group header" and "Include group footer"
8. Check "Page break at start"
9. Select "OK"
Re #6, I also read to try this so I did: =CInt(Ceiling(RowNumber(Nothing)/100))
Re #8, I also tried "Page break at end"
Is "Details grouping..." relevant?
Thanks.

Table header row to show only on even pages

Within a table I have made few of the rows as header row. Is there any way I can make this header row to show only on even pages..I tried doing this at the beginning of each header row <?if:(fo:page-number) mod 2=0?>..but its' not showing me anything..

Thanks that helped..But I am having another problem. I want to call different templates in the even header section... based on the page number...for example..for
page 2 of 2, I want to call template1 in the even page,
page 2 of X, I want to call templete2 in the even page,
Can you please help..?

How to make a table to display perticular number of rows per page??

Hi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.

Hi Tony ,
Just wanted to know will this solution work ;
I am having a report and its using a grouping expression on “Group on
(=Field!Salelocation)” when it add another group on the details and have the page calculation such as (=Ceiling(RowNumber(Nothing)/20))
and assign the page break at to the point of saving its ok , when trying to upload the report then it throws the following error .
I have tried your solution trying to give the page calculation the upper group but still the following error comes back
“A group expression for the grouping ‘table2_Group1’ uses the RowNumber function with a scope parameter that is not valid. When used in a group expression, the
value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
A group expression for the grouping ‘table2_Group2’ uses the RowNumber function with a scope parameter that is not valid. When
used in a group expression, the value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
Will you able to assist me on this.

How to implement Rows Per Page Selector for a tabular form kind of report

Hello,
Can somebody please tell how to implement Rows Per Page Selector in a tabular form (updatable report)
-- similar to what we can have in an Interactive report---
Plz help me out.

You have to create item text field or select list (in interactive report is select list, you can create static value for example 10, 15, 50 , 100,500,.....) . In the Tabular form you have to go Report Attributes, search Number of Rows (Item) and select your item. And thats all. If I help you please check CORRECT or Helpful.

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

Rows per Page for PIVOT view.

Hi,
Is there any way we can show limited no of rows in pivot. Rows per Page for PIVOT view.
on the click on next one should move to the next page.
Thanks

Pagination in Pivot Solves your problem at UI Level only.
Below is the link that guide you how to implement Pagination in Pivot:
[http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/]
Hope it helps you..
-Vency

Rows Per Page option in Pivot view.

Hi,
If our report is returning more no of rows and if it is in table view , we have and option in table edit view "Rows per page". Do we have same "Rows per page" option available in Pivot table view.Because i have a report which is returning more than 150 rows and i want only 10 rows to be displayed and then scroll.
Regards,
Som.

Currently, we do not have that for Pivot tables. You can use another approach to show the pagination. I have an example here http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/.
Thanks,
Venkat
http://oraclebizint.wordpress.com

Display column titles only once per page

Hello,
I am a newbie to BIP (R12.1.3). Below is how the output data shows up in my custom template:
Vendor type lookup : Expense
Vendor no: A12345 Vendor Name: Test Vendor1 Vendor Category: Expense - Construction
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
======== ====== ========= ====== ====== ====== ============
Kannapolis A#12345 03-MAR-12 15-MAR-12 1000.00 1000.00 Check
Vendor no: B12345 Vendor Name: Test Vendor2 Vendor Category: Expense - Rents
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
======== ====== ========= ====== ====== ====== ============
Test Site B#12345 03-MAR-12 15-MAR-12 1500.00 1500.00 EFT
The column titles repeat for each vendor since the titles are in the for-each loop under the vendor grouping. However, is there a way to restrict the titles to show up only once per page on all the pages? I tried putting the titles outside the vendor grouping but with in the vendor type lookup grouping. It is displaying the titles only on page1.
Thanks,
Monkey

Hi, could you try Inserting the code <?if:position()=1?> before the header of your template and the code <?end if?> after the header of your template.
See the a sample code below:
<?if:position()=1?>
VENDOR SITE INVOICE# INVOICE DATE DUE DATE INVCT AMT REM AMT PAYMENT METHOD
<?end if?>
Thanks,
mr_bip_learner

How I show only 20 rows per pages in a rtf report in BI Publisher 11g

Similar Messages

Maybe you are looking for