HOw to fix No of Rows per page in SSRS

HI,
I have 400 records in my report , i want display 20 records per page , how can i do the same in ssrs.
Thanks in Advance.

I need to do 100 rows per page. I tried the technique above but I am still just getting about 16 rows per page. (I believe I followed the instructions correctly.)
I know...100 rows is a ton but the users want it (and, thus, my boss wants it). They only display the report; they do not print it.
Here is what I did...
1. Right click on the table
2. Select Properties
3. Select the Groups tab
4. Select Add...
5. Enter a group Name: "Group_for_PageBreak" (I have no other groups)
6. Enter an expression: =Ceiling(RowNumber(Nothing)/100)
7. Uncheck "Include group header" and "Include group footer"
8. Check "Page break at start"
9. Select "OK"
Re #6, I also read to try this so I did: =CInt(Ceiling(RowNumber(Nothing)/100))
Re #8, I also tried "Page break at end"
Is "Details grouping..." relevant?
Thanks.

Similar Messages

How I show only 20 rows per pages in a rtf report in BI Publisher 11g

I'm making a report and i want show only 20 rows per pages in a formatt RTF. I get this with anything as a xls, xslt....
I'm a new user....please . Any idea..???
Thank for all.
Edited by: 844565 on Mar 15, 2011 7:34 AM

Instead of doing that take the url CURRENT_SERVER_URL(pre-definde BI Publsiher variable) by declaring like below
<?param@begin:CURRENT_SERVER_URL?>
Then subsequently add the extra patameters eg. region like below
{$CURRENT_SERVER_URL}Data/Country.xdo&p_region={REGION} <- get this REGION value from XML
Cheers,
ND
Use the "helpful" or "correct" buttons to award points to replies.

How to make a table to display perticular number of rows per page??

Hi,
Can anybody tell how to ristrict the number of rows per page in SSRS?
I have a table in my report.I know we have to use" =Int(RowNumber(Nothing)/25)" in group expression.But I already have 3 group expression in my table.Where to write??
Thanks.

Hi Tony ,
Just wanted to know will this solution work ;
I am having a report and its using a grouping expression on “Group on
(=Field!Salelocation)” when it add another group on the details and have the page calculation such as (=Ceiling(RowNumber(Nothing)/20))
and assign the page break at to the point of saving its ok , when trying to upload the report then it throws the following error .
I have tried your solution trying to give the page calculation the upper group but still the following error comes back
“A group expression for the grouping ‘table2_Group1’ uses the RowNumber function with a scope parameter that is not valid. When used in a group expression, the
value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
A group expression for the grouping ‘table2_Group2’ uses the RowNumber function with a scope parameter that is not valid. When
used in a group expression, the value of the scope parameter of RowNumber must equal the name of the group directly containing the current group. (rsInvalidGroupExpressionScope)
Get Online Help
Will you able to assist me on this.

How to implement Rows Per Page Selector for a tabular form kind of report

Hello,
Can somebody please tell how to implement Rows Per Page Selector in a tabular form (updatable report)
-- similar to what we can have in an Interactive report---
Plz help me out.

You have to create item text field or select list (in interactive report is select list, you can create static value for example 10, 15, 50 , 100,500,.....) . In the Tabular form you have to go Report Attributes, search Number of Rows (Item) and select your item. And thats all. If I help you please check CORRECT or Helpful.

How to set number of rows in "Rows Per Page Selector" in Interactive Report

Hi Guys,
Is there any way to set the number of rows in "Rows Per Page Selector" in Interactive Report. By default it is set to 15.
I know one way is to change the number of rows when you are running the report and then set that as 'Default Report Setting'.
If anybody is aware of any other way, please let me know.
Cheers,
Ashish Agarwal
http://www.dbcon.com.sg

Hi Pavel,
can you please specify your question more clearly. If you are on NW 7.0 you can determine a number of colums for your filter item with following command:
COLUMNS
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/85/08e241aa8e9d39e10000000a155106/content.htm
If you meant the amount of rows within the analysis item you can use following command within your analysis item:
BLOCK_ROWS_SIZE (numbers of rows displayed at once)
BLOCK_ROWS_STEP_SIZE (numbers of rows to be scrolled for one step)
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/76/489d39d342de00e10000000a11402f/content.htm
Brgds,
Marcel
Edited by: Marcel Landsfried on Feb 10, 2009 7:45 PM
Edited due to wrong url

How to set the number of rows per page dynamically

Hello all,
i urgent need the option to set the number of rows per page dynamically.
I've got a parameter.
In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
The Reports Builder version i use is 10.1.2.0.2
I defined a report trigger.
My code so far:
function R_G_BEMERKUNGFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
--what i've to write right here??
return (TRUE);
else
     return (TRUE);
end if;
return (TRUE);
end;
Can anyone help me please??
Best regards
Florian

Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
function M_G_ename_GRPFRFormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'Y' then
    return (TRUE);
else
    return (FALSE);
end if;
end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
function M_G_ename_GRPFR1FormatTrigger return boolean is
begin
if :vYN_Display_one_per_page = 'N' then
    return (TRUE);
else
    return (FALSE);
end if;
return (TRUE);
end;

NEXT button on report portlet shows 10 rows-maximum rows per page=9999

I created a report with the DB Provider portlet. I set the maximum rows per page to 9999 when displayed as a portlet and as a full page. I put the portlet on a page and it only shows 10 rows and then the next button.
If there are exactly 10 rows I get the next button. If I click it the next page loads with no data. If there are less than 10 rows there is no button.
If I create a new portlet it does not do this. I'm only having the problem with one portlet now but I've seen it in the past. I usually just build the portlet again but I would like to know how to fix it.
I can't customize the portlet because of bug #3467032.

Select customize and set the number of rows to 9999. I'm guessing that it's currently set to 10.

How to Fix the 1st row in Table

How to Fix the 1st row in Table
In EP, one of the page we are getting out put in the table format. It's working fine, but as per the new requirement we have to fix (freeze) the first row of the table. (.i.e. whenever I click the page down button first row should be visible in the table). Can you help regarding the above issue?
For Example: in Table having 6 rows. In 1st row display Year Month and 2,3,4---etc Rows will display Quantity. Click on Page down Button in Table we are able to staring 2row. First was a movie up. So End user canu2019t find which year/moth under the Quantity is available.
So I have to fix in 1st row. Click on page down button table 1st row is fixed but comes to another Quantity Records.
It is Possible in Table? If possible please tell me.
Regards
Vijay Kalluri

Hi KalluriVijay
I don't think there is direct availabe method available to fix the row. However, there are two ways using which you can achieve the requirement:
To go ahead with the custom table. This way you can set your own properties for the table. However, this may impact performance handling large data.
Second option is to use other features of NW04s (Not available in NW04) like Table Popins using which you can achieve something similar.
For Table Popins refer [TablePopin|http://help.sap.com/saphelp_nw70/helpdata/EN/23/5e9041d3c72e7be10000000a1550b0/frameset.htm]
Hope this helps.
Regards
Abhinav Sharma

Rows per Page for PIVOT view.

Hi,
Is there any way we can show limited no of rows in pivot. Rows per Page for PIVOT view.
on the click on next one should move to the next page.
Thanks

Pagination in Pivot Solves your problem at UI Level only.
Below is the link that guide you how to implement Pagination in Pivot:
[http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/]
Hope it helps you..
-Vency

Page Break / Maximum Rows per Page

Hi - One more question....
I have a group left report and want to keep each master group (the value that is grouped on the left) on its own separate page. In Reports 6i I would have set the Max Rows Per Page property to 1 on the outer repeating frame and that would make sure I had at most 1 master record per page.
The only way I can see to replicate that functionality in XML Pub is to insert a page break (split-by-page-break) before the end-for-each tag on the group. It looks good in PDF, but in Excel or HTML it repeats the full header with Logo and titles and looks pretty ridiculous.
So the $1 Million dollar question is how can I make sure there is at most 1 master group per page, but when I output to Excel I only get the header once? Because if I take out the split-by-page-break I get the desired output in Excel but not in the PDF. I really want to be able to use 1 template for all output types because it seems silly to have a separate template depending on the output type.
Ideas?

PDF, understand what is page,
HTML is a single page view and it does nto understand, and same is the case for Excel.

How to Control with Maximum Record per Page

Hi Every one
how can I control with maximum record per page with parameter sending from Form
ex.
if I set parameter with value=15 the report will run 15 rows per page ?
Can anyone help me Please ASAP ?
Thankx

PLay around with SRW.SETMAXROW , from memory that should do the trick.
Cheers.
N.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

How to restrict number of Rows in page?

Hi Experts,
I have scenario when i convert the Report in to PDF i have to display 10 Rows per page. \
Any ideas !!!
Thanks
-B-

Hi,
I have tried this method at my end and its working perfectly fine.
1. I created a variable at report level as:
v Test = Floor(RowIndex()/10)
2. Added this variable in the Block as a new column.
3. Select the v Test column, Right Click and set as section.
4. Go to structure mode select section and go to properties tab and select the property "Start on new page" under Relative Position.
After following these steps, if you are not able to get the result then can you provide details of the failure or what results did you get and so on.
Regards,
Rohit

Limit rows per page, include spacer and format last row on page break

Hello,
I am new to BI and would like some help with an issue I don't seem to be able to resolve?
I have a table that uses two xml group elements (2nd nested inside first) to produce my detail lines.
Example:-
First for-each loop runs over shipto details and within this another for-each loop runs over items related to that shipto, all of which results in multiple detail lines.
I need to limit the number of rows per page and should the data roll over to the next page I need to place a horizontal closing border on the first page's table (only using column borders).
Also when the data does not fill the page I need to add spacer rows to the page limit?
I have tried using examples found in these forums, position(), counters etc… but due to having the second detail loop I’m unable to get these working or I’m doing something wrong?
Your help would be greatly appreciated.

Hi BIPuser, thanks for the links.
I have tried some of the examples which I can get working with a single level of detail lines. However when I add the second level of detail lines the position() function seems to fail as my rowlimit appears to be ignored.
I am also unable to get the $lpp example working because the outer detail loop may only have one xml element and therefore BI assumes only one line is to be printed when in fact the inner xml element detail loop may have further multiple lines. I need to effectively count the outer & inner loops as one to determine the number of lines being processed.
Example of xml - My table for detail lines needs to include both ShipTo & item number lines grouped as shown, thereby counting & outputting 7 lines in this instance.
<INVOICE>
<On_Ship_To_S23> Outer loop
<On_itm_num_shr_row_S21> Inner Loop
<On_itm_num_shr_row_S21>
<On_itm_num_shr_row_S21>
</On_Ship_To_S23>
<On_Ship_To_S23>
<On_itm_num_shr_row_S21>
<On_itm_num_shr_row_S21>
</On_Ship_To_S23>
</INVOICE>

Problem with number of rows per page ....

Hi,
I have a updatable report .This is a dynamic report which can have more than 100 columns depending on the table name .I have set number of rows =15 in layout and pagination .Its displaying 15 rows per page .My requirement is 50 rows per page .So i changed to 50 in layout and pagination .Its displaying 50 rows per page .But when i select some button in that page or move to other tab i get "page not found "error .If i replace back to 15 rows per page ,everything works fine ...Dont know why this is happening ..Please help..
Thanks in advance ....

Hello,
You can use Maximum Records per page property of Repeating
Frame.
Adi

HOw to fix No of Rows per page in SSRS

Similar Messages

Maybe you are looking for