How Inventory is connected to Order Management

Hi,
i want to know in Order to cash lifecycle, how inventory is connected to Order management?
Thanks,
magesh

Order Management responsibility is Operating Unit Specific which means any OM responsibility is tied to a specific operating unit. When you define Inventory Organizations, they are assigned to a Operating Units. So thats the link between the OU and the Inv Org. Since OM responsibility is OU specific, you can say thats the link between OM responsibility and Inv Org.
Also in Order Management, In the OM System Parameters form, you specify a value for Item Validation Organization. So thats how they are connected.
Hope this helps.
Thanks,
Anil
Blog: http://oracle.anilrpatil.com

Similar Messages

VMM Connection to Configuration Manager and Operations Manager

Hi,
i was wondering how do i connect Virtual Machine Manager to Configuration Manager. do i need to have operations manager installed and up and running? or can i connect it to SCCM directly as it is being the main component.
From my understanding of the VMM is that it is used for provisioning and controlling of Hyper visors (cytrix, Vmeare, etc.).
why do i need to go through the Operation Manger? why can i not connect directly to SCCM?
whats the Advantages of using operations manager instead of using CM?
Thanks.

VMM has no direct link to Configuration Manager at all.
VMM has a direct link to Operations Manager, which can be integrated and monitor the entire fabric (compute, networking and storage).
The synergy here is that every thing in VMM, will get exposed for monitoring in SCOM.
Configuration Manager has a different approach - as VMM is responsible for the
datacenter - while Configuration Manager manages the clients and eventually applications within the servers/clients.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Can oracle inventory forecasting be used without order management??

Can someone please tell me how oracle forecasts are used.
Like i have configured and tested it but i want to know how it calculates forecasting and whether it can be used without order management module or not
when i define item comsumption entries and gvie a quantity in current, the ending date and then see bucketed, it shows same forecasted quantity for all periods that i entered in item comsumption entries
I dont understand this
And why is forecasting necessary for reorder point planning
Some please explain
Thanks
Emm

Query: "can oracle inventory forecasting be used without order management?"
Yes, in that case it can accept manually entered forecasts or forecast generated from Inventory demand history (say Miscellaneous issue, Inter-org Transfer, Issue to WIP) excluding Sales Order issues (as OM is not included).
For remaining questions you can refer to my earlier post under the following thread. Please refer to the bottom section (thread was started with a different subject)
serial attribute and org attribute problems with item master
If your questions are answered you can mark the thread as appropriate.
Thanks
- Supro

How to Ship Partial Quantities using an API - Oracle Order Management

Hi,
In Order Management I need to ship the Internal Sales Order Lines partially using an API.
I have done full shipping but if I trying the partially shipping it is also shipping fully.
I am unable to find the problem. Is there any set up missed?
How to do partial shipping.
I am giving the some part of the code please look into it and suggest me.
----**************************UPDATEING SHIPIN ATTR ***************************-------------
I_changed_attributes (X_count).delivery_detail_id := cos.delivery_detail_id;
I_changed_attributes (X_count).shipped_quantity := cos.shipped_quantity;
X_ship_date := cos.act_shipped_date;
X_slaes_order := cos.sales_order;
X_org_id := cos.org_id;
wsh_delivery_details_pub.update_shipping_attributes ( p_api_version_number => 1.0
,p_init_msg_list => I_init_msg_list
,p_commit => I_commit
,x_return_status => O_return_status
,x_msg_count => O_msg_count
,x_msg_data => O_msg_data
,p_changed_attributes => I_changed_attributes
,p_source_code => I_source_code
----***************************SHIP CONFIRM API ***************************-------------
I_action_code := 'CONFIRM';
I_sc_action_flag := 'B'; --'S'; -- Ship entered quantity. 'B' - Ship Entered Quantities, Backorder Unspecified
--'T' - Ship Entered Quantities, Stage Unspecified'A' - Ship All'C' - Completely Backordered
I_sc_intransit_flag := 'Y';
--In transit flag is set to 'Y' closes the pickup stop and sets the delivery in transit.
I_sc_close_trip_flag := 'Y'; -- Close the trip after ship confirm
I_sc_trip_ship_method := X_ship_method_code; -- The ship method code
I_sc_defer_interface_flag := 'Y';
I_sc_stage_del_flag := 'Y';
I_sc_create_bol_flag := 'N';
I_wv_override_flag := 'N';
-- API Call for Ship Confirmation
fnd_file.put_line(fnd_file.log,'Calling WSH_DELIVERIES_PUB to Perform Ship Confirmation');
fnd_file.put_line(fnd_file.log,'=============================================');
wsh_deliveries_pub.delivery_action ( p_api_version_number => 1.0
, p_init_msg_list => I_init_msg_list
, x_return_status => O_return_status
, x_msg_count => O_msg_count
, x_msg_data => O_msg_data
, p_action_code => I_action_code
-- , p_delivery_id => cos.delivery_id
, p_delivery_name => G_delivery_name
, p_sc_action_flag => I_sc_action_flag
, p_sc_intransit_flag => I_sc_intransit_flag
, p_sc_close_trip_flag => I_sc_close_trip_flag
, p_sc_create_bol_flag => I_sc_create_bol_flag
, p_sc_stage_del_flag => I_sc_stage_del_flag
, p_sc_trip_ship_method => I_sc_trip_ship_method
, p_sc_actual_dep_date => X_ship_date --P_act_shipped_dt
, p_sc_defer_interface_flag => I_sc_defer_interface_flag
, p_wv_override_flag => I_wv_override_flag
, x_trip_id => O_trip_id
, x_trip_name => O_trip_name
----***********************************************************************--------------------

Hi Shesh,
Thanks you for your replay.
I am tried Shipping transaction screen but here the ware house is WMS enabled I tried Oracle Mobile Terminal application to do this, but it is not accepting the partial shipping. May be some set up required or the process will be differ.
I will try your suggested API's .
Regards,
Prasanna
Edited by: 843676 on Apr 23, 2012 10:31 PM
I am not able to do the Partial Shipment or Backorder as mentioned above API's, but it is split the lines and all the lines are in same state (Awaiting Shipping)
Edited by: 843676 on Apr 24, 2012 2:45 AM

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page (I turn Shockwave Flash on only to see videos - having it off prevents screen freezing - and so I want it stay at the top of the list)?

In Firefox 4, how do I change the order of plugins on the Add-ons Plugins manager page? I turn Shockwave Flash on only when I want to watch a video and then turn it off to prevent screen freezing, and so I want it to PUT it and KEEP it at the top of the list.

Hit Ctrl+0 (That's a zero, by the way). I'm not sure if it will work, but hey, that's the first thing I would try.

Adding Inventory functionality to a custom Order Management Menu

We have custom menus set up to limit access for users. We currently have a user that needs the 'Move Order' functionality from the Inventory module. This user does not have access to any inventory functionality. I would like to add the 'Move Order' submenu to a custom order management menu she does have access to. Would this work as anticiipated or would this introduce issues in one or both modules? Thanks.

Hi,
There should be no issue if you add the proper submenu. You may also need to add some functions which could be relevant to this submenu for accessing it properly from the custom responsibility.
I would suggest you try this on test instance first, then move it to your production environment.
Regards,
Hussein

How to I connect to a custom CMS from FrameMaker Connenction Manager?

Hello,
I am using the Adobe Technical Communication Suite 5 and was wondering how
I can connect to a custom CMS, using the Connection Manager in FrameMaker 12.
Is there a write-up on making custom connections anywhere?
Thanks,
Jim

See:
http://blogs.adobe.com/techcomm/2012/09/open-source-sample-connector-between-framemaker-11 -and-adobe-cq-now-available.html
How to build a connector between your CMS and FrameMaker 11? New CMS API documentation now available! « Technical Commun…
Framemaker Developer Center | Adobe Developer Connection [See third section down (CMS Connector)]

How to identify which Internal order type is relevant for Budget manager

Hi,
How to identify which Internal order type is relevant for Budgeting i.e Budget Manager.
regards,
Rajesh

controlling-internal orders-budegeting and availability control -define tolerance limits for availabilty control
in which it is defined whether mail be sent to budget manager against the budget profile(budget profile is assigned to order type).
controlling-internal orders-budegeting and availability control -define tolerance limits for availabilty control-maintain budget manager
here budget manager is assigned to order type
assign me points if it is useful

INVENTORY & ORDER MANAGEMENT Tables join conditions required

Hi All,
I have to create one view, it has to display item_number, item_description,quantity_in_warehouse and pendingquantity_in_salesorder.
query is based on INVENTORY & ORDER MANAGEMENT Tables. i have written below query, it is not giving expected output. Kindly go through once and rectify me if i did any thing wrong while writing the join conditions.
SELECT mtlb.segment1 Item_Number,
mtlb.description Item_Description,
mtld.transaction_quantity Quantity_in_Wearhouse,
oel.ordered_quantity PendingQuantity_in_SalesOrder
FROM mtl_system_items_b mtlb,
mtl_onhand_quantities_detail mtld,
oe_order_headers_all oeh,
oe_order_lines_all oel
WHERE mtlb.inventory_item_id = mtld.inventory_item_id
AND mtlb.organization_id ; = mtld.organization_id
AND mtlb.inventory_item_id ; = oel.inventory_item_id
AND oeh.header_id ; = oel.header_id
AND oeh.org_id ; = oel.org_id
AND oeh.ship_from_org_id ; = mtlb.organization_id
AND oel.ship_from_org_id ; = mtlb.organization_id
AND mtld.subinventory_code LIKE 'Warehouse'
AND oel.flow_status_code LIKE 'AWAITING_SHIPPING'
ORDER BY mtlb.segment1;
it is bit urgent. please help me to resolve this issue.
Thanks.
Edited by: user627525 on Jul 19, 2010 4:35 AM

Hi Jonny,
Thanks for your reply. it is very useful for me. need small clarification.
i have execute the query that u have given. please find the following output.
segment1 order_number line_number shipment_number on_hand
210020004000011 10005 1 1 139150
210020004000011 10006 1 1 139150
210020004000013 10005 2 1 27675
210020004000013 10006 2 1 27675
i have modified the query and added column ordered_quantity from oe_order_lines_all table.
SELECT
mtlb.segment1 ; as Item_Number,
mtlb.description as Item_Description,
sum(mtld.primary_transaction_quantity) as Quantity_in_Whouse,
oel.ordered_quantity as PQuantity_in_SOrder
FROM oe_order_headers_all oeh,
oe_order_lines_all oel,
mtl_system_items_b mtlb,
mtl_onhand_quantities_detail mtld
WHERE oel.header_id = oeh.header_id
AND oel.inventory_item_id = mtlb.inventory_item_id
AND oel.ship_from_org_id = mtlb.organization_id
AND oel.inventory_item_id = mtld.inventory_item_id
AND oel.ship_from_org_id = mtld.organization_id
AND oel.flow_status_code = 'AWAITING_SHIPPING'
AND mtld.subinventory_code = 'Warehouse'
GROUP By mtlb.segment1,mtlb.description,oel.ordered_quantity
ORDER BY mtlb.segment1;
i have executed the above query. Quantity_in_Whouse is showing double the actual available quantity.
item_number item_description Quantity_in_Whouse PQuantity_in_SOrder
210020004000011 item1 278300 100
210020004000013 item3 55350 125
when i executed the below query, Quantity_in_Whouse is showing 139050 and 27550 respectively.
SELECT mtlb.segment1 Item_Number,
mtlb.description,
sum(mtld.primary_transaction_quantity) Quantity_in_Whouse
FROM mtl_system_items_b mtlb,
mtl_onhand_quantities_detail mtld
WHERE mtlb.inventory_item_id = mtld.inventory_item_id
AND mtlb.organization_id ; = mtld.organization_id
AND mtld.subinventory_code LIKE 'Warehouse'
and mtlb.segment1 in ('210020004000011','210020004000013')
group by mtlb.segment1, mtlb.description
ORDER BY mtlb.segment1;
item_number item_description Quantity_in_Whouse
210020004000011 item1 139050
210020004000013 item3 27550
please give some solution so that i can display Quantity_in_Whouse as 139050 and 27550 .
if i am any thing wrong please rectify me.
Thanks in advance.
Edited by: user627525 on Jul 19, 2010 7:54 AM
Edited by: user627525 on Jul 19, 2010 7:56 AM
Edited by: user627525 on Jul 19, 2010 9:39 AM

With Multi-Factor Authentication ENABLED how can a admin connect remotely to manage Office 365 with PowerShell

With Multi-Factor Authentication ENABLED how can office 365 admin connect remotely to manage Office 365 with Power-Shell ?
When I key-in my credentials, auth fails with invalid username and password ?
Does any know the procedure ?

This question was closed over a year ago. You will need to start a new question. You can post a link back here if you think it helps.
I also recommend asking in the O365 developers forum for how to do bulk license upgrades. You can use the answer here and just remove and then add the new license.
¯\_(ツ)_/¯

How to open order management Vision Demo

Hello:
I install E-Business Suite Vision Demo 11.5.10.
How can I open the order that is set in the Order Managment Module?
Please help
Sem

Hi
1)Go to Order Management Super user module
2)Navigate to Order return--> Sales order
3) u will get the sales order form
4) which will have 2 tabs namely a) order information and b)Line Items
4)In the Order information Tab u will find the Order type field will be a mandatory field
5) U just query for the Customer Filed and select any customer from the list
6) Automatically the Order type field will get a value since an order type would be attached to the customer.
7) If u dont find the order type field populated for the time being select a differnet customer
8) Now clcik the line item tab
9)In the line items just fill the line details and save it and book the order.
Thanx
Sunil

Linking Order Management with inventory

Hi
I am new to Oracle Apps as i am working on Data warhousing front.
I have a requirement in Data warehouse to relate the Order management tables with Inventory tables.
I need to know whether there is any possibility on source side to join these 2.
My source system is oracle Apps.
I nned to know whether i can able to link these subject areas in Oracle Apps.
please let me know if you have solution for this.
Thnx in advance,
Soma

Hi Amr,
You would have attached the "Allocation class" for that item right. Please check the Parameter for the particular "Allocation Class" where you would have mentioned "TYPE = AUTOMATIC". Upto my knowledge thats the issue in your case.
Razzy.
One request to you Amr.
Can you share Setup and Flow of "Oracle Purchasing and OPM Quality" integration with me. Beacuse i am facing problem from the scratch and i am thinking to setup "Oracle Quality" for the Receiving inspection in Oracle Purchasing. Is it right?
Please advice me with your experience in this Regard.
Razzy

How to connect LiveCycle Rights Management ES4

Hello,
How to connect LiveCycle Rights Management ES4 with Acrobat?
The URL of LiveCycle Rights Management ES4 is [ link removed ]
Best regards

See if this helps you...
http://blogs.msdn.com/b/ecm/archive/2010/02/13/introducing-records-management-in-sharepoint-2010.aspx
http://technet.microsoft.com/en-us/library/cc261982.aspx
http://www.cmswire.com/cms/document-management/the-scoop-sharepoint-2010-records-management-005948.php
"T" | community.zevenseas.com/Blogs/Tanmay/default.aspx

How to implement Approval hierarchy for Sales Order in Order Management.

Hi,
We need approval process for sale orders in Order Management module. Currently we are using credit HOLD option for orders at shipping level. The issue we are facing now is we can not cancel those orders who contains Service Line item in it while on HOLD. The restriction raised at the time of cancelling the order that the Line Item is "fulfilled". Service line item's get fulfilled.
Is that any other possibility to have Approval hierarchy for Sales Orders in Order Management Module? If it is possible can anybody share the related document or implementation guide?
Thanks with anticipation in advance.
Many Regards
Kaleem Bhatti

I copied the standard order header workflow and the "Book Order, Manual" workflow to custom workflows. I then modified the "Book Order, Manual" workflow to put another completely custom workflow (call this "Approvals") in between the "Book Eligible" and "Book" steps.
The "Approvals" step assessed the sales order, changed the order header to the pending approval flow_status_code, and sent out the appropriate notifications. The "Approvals" step returned a Complete/Incomplete where complete would proceed to "Book" and incomplete would go back to "Book Eligible." The new workflow was then assigned to the order type needed. I don't still have access to that environment (job change) or I would give more definite instructions.

Question about how to connect two solution manager

Hello experts
one of our clients wants to connect his SOLMAN to our SOLMAN, that way
when they receive a case in his ICM we can monitor the case and respond
It, if the situation requires or they ask for our help.
Can you please tell me if theres a way to connect them and what is the
best way to do that?
Thanks for your help,
Regards,

You are going to connect a Solution Manager to another Solution Manager, so I think it is enough to use the RFC destination on the connection.
I suppose you want to send a message from 7.0 to 7.1, so you may:
In Solman 7.0 system:
1. T-code SM59   > Define an RFC connection to 7.1 system;
2. T-code ICTCONF   > Add an entry for the 7.1 service desk, specify
the RFC Destination as the one you defined   > Activate -> Generate default value mapping (you may find the button on the top of ICTCONF).
In Solman 7.1 system:
1. T-code SM59   > Define an RFC connection to 7.0 system;
2. T-code ICTCONF   > Add an entry for the 7.0 service desk, specify the RFC Destination as the one you defined   > Activate -> Generate default value mapping;
3. Customize your own value mapping including the transaction type. You will find the details in:
    IMG -> SAP Solution Manager -> Capabilities (Optional)    -> Application Incident Management (Service Desk)    -> External Integration -> External Service Desk
Most fields of SIVA and SMIV are the same (for example, priority) so you do not need to care about the value mapping if you do not have special requirement. However, some fields only exist in SIVA category, subject) and others only exist in SMIV (multilevel categories). You may need to implement your own code according to your requirement.
Thanks
Vikram

How Inventory is connected to Order Management

Similar Messages

Maybe you are looking for