How many solution manager systems can a satellite connnect to?

Hello All,
I was just wondering how many solution manager sytems a single satellite can connect to?
thnx!

Hi Drew,
Thats a interesting point to check ..and wonder if i can ever simulate this one ))
coz..my landscape has a max of 2 solman systems...and i can not think of having many SOLMAN's in a single landscape.... but i assume u can make multiple entries in BCOS_CUST and proceed with linking the satellite to solmans...
Hope it helps..
Br,
Sri
Award points for helpful answers

Similar Messages

Error in RFC & to Solution Manager System

Hi,
Error in RFC & to Solution Manager System
can anyone tells me why this error occurs???
With regards
kulwinder

FYI
We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error. We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
Paul

Multiple Solution Manager Connectivity to 1 Satellite system

HI..
I have a requirement. There is already an existing landscape with solution manager ECC, BI etc. The solution manager is configured for EWA, Maintenance optimizer etc. I now have to install a new solution manager and connect it to the same set of satellite systems so that I receive the EWA, configure MOPZ again. Will this create any kind of a problem and technically how can we do it? I have two ideas for this scenario
1. Connect the new solution manager to the same satellite systems and do configuration as normal. Got this idea from the below link but not sure how it will work.
Re: send EWA report to more than one solution manager
2. Is it possible to push data from the existing solution manager to the new solution manager?
Would highly appreciate technical suggestions. Thx in advance for your help.

Hello,
You need the SMD Agent in order to have ABAP data going to the Solution Manager. Some RFCs are established directly from Managed System to the Solution Manager to extract E2E Change Analysis, Exception Analysis. The Workload Analysis and Host Information (SAPOSCOL) is extracted from WIly EM
Having that said, you can imagine that you cannot have only RFCs and you cannot have only data extracted from WIly EM.
I suggest you to take a look at the FWK Administration in the solman_workcenter, choose the Managed System tab, and start looking into the details of each extractor. Some have an RFC destionation, others have SOLMANDIAG. The SOLMANDIAG are coming from the Solution Manager Java stack, which is responsible to poll the Wily EM.
The reason you need two SMD Agents is because the SMD Agent connects to the ABAP stack, retrieves data, and then connects to the Wily Enterprise Manager. The Solution Manager polls data from the Wily EM and persists it in the BW.
The SMD Agent doesn't support connecting to two Wily EMs at the same time.
So it is required to have TWO SMD agents polling data from the ABAP stack, at the same time, one of them reporting to one Wily EM, and the other reporting to the other Wily EM.
Each solution manager has it's own Wily EM, and it will pull the ABAP data from the Wily EM.
It is not possible to make the two Solution Manager's connect to one Wily EM, since the setup framework needs to see a SMD Agent available to run the setup wizard and to create the destinations. So each Solution Manager needs a SMD Agent running in the physical host.
I hope it is clear for you.
Best regards,
Guilherme
Edited by: Guilherme Balbinot on Feb 6, 2012 9:44 PM
Edited by: Guilherme Balbinot on Feb 6, 2012 9:49 PM

How to get the ASAP 7.0 Implementation roadmap in Solution manager system?

Hi,
We are on SOLMAN 7.0 SP19 and we wanted to use the ASAP 7.0 roadmap for an implementation project. But currently we dont see this roadmap in the list of Roadmaps available. Can some one tell how it can be brought in and made available in Solution manager system. Is it done through a SAP note? If not where do we can get this roadmap? I know the HTML version is available in service matketplace but we want the roadmap to be assigned in Solution manager project.
Regards,
Kathir

Hi Lori,
Thanks for your reply. Do you have information on what support pack level of ST-ICO will have the Roadmap ASAP 7.0?
The currentl level of my system is ST-ICO 150_700 0018.
Regards,
Kathir

How to apply patches by using solution manager system?

HELLO FRIENDS,
    when i download the patch SAPKB70012 & next level patches from service market place, it says that we have to apply the following packages by using maintenance optimizer(solution manager). here i have solution manager4.0., please any one let me know how to configure the maintenance optimzr and how to apply support packages by the solution manager system.
          Thanks&Regards
           Farkath.C

Hello
Solman will not implement the files you can download the files using Solman. You need to move the downloaded files to application server and implement them for that you need to configure MoPZ
You can go to server market place service.sap.com/RKT in that select Solution manager.
You will have to select the product as solution manager 7.0 and in technology consultants and system administrator you will find the configuration documentations in for for SIM files.
You can use that and learn how to configure the optimizer on the system.
Then you can download the files and implement the same.
Regards
Vivek

How to integrate Solution Manager system to Enterprise Portal

Hi all,
HOW TO INTEGRATE SOLUTION MANAGER SYSTEM TO ENTERPRISE PORTAL SYSTEM

Hi,
First establish SSO between portal and solution manager.
make the iview from com.sap.portal.epsolman.EPSolman
check the link for help
ep and solution manager support desk
Thanks
Santosh

How to transport solution (in dswp) in solution manager system

how to transport solution (in dswp) in solution manager system ??

Hello,
I don't think this is possible in DSWP.
Please refer to this link for information related to change management.
http://wiki.sdn.sap.com/wiki/display/SM/ChangeRequestManagement
Regards,
Paul

How many 30" Cinema Displays can a G5 manage?

Hi All
Im wondering How many 30" Cinema Displays can a G5 manage?
is it just 2 .. or can you connect more to it?
Answers appreciated.

Hi,
I'm pretty sure you can connect as many as you have Dual-Link-DVI capable graphics cards. Better ones are "Dual-Dual-Link-DVI" which means you can connect 2 30" displays.

EWA: error message in CRM check for SAP Solution Manager system

Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name                                Status     Date of first entry             Entries
CSABUPA0000000070           READY     03.12.2007                          45
CSABUPA0000000934           READY     07.05.2008                          45
CSAIBASE0000000000           READY     23.11.2007                          36
CSA_ORDER_8000000000      READY     22.11.2007     5
CSA_ORDER_8000000001      READY     22.11.2007     3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AM

Hi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH

Support message not getting reflected in Solution manager system

Hi,
In satellite system support message is getting created, message number"...." successfully created in service desk.
When i check in solution manager system in crm_dno_monitor the message that i created in satellite system is not getting reflected in solution manager. I removed the varients and then executed . The result is still the same.
Service desk was configured from our Development system (Client 320) to solution manager. I wanted the support desk to work from my another cleint in same system to Solution manager.
What can be the possible problem.
Thanks & Regards,
Balaji.S

Hi Gurus,
Issue got resolved, the problem was with the variant which was assigned as default for the tcode.
Thanks & Regards,
Balaji.S

1 Solution Manager System - Mulitple Companies.

Hi All,
Please provide some input/information regarding one Solution Manager system with multiple companies.
Situation:
We currently have one Solution Manager system(SMP) that belongs to a main company. Under this company there are 5 separate companies. Each company including the main company has multiple SAP systems with different landscapes. Main Company - ECC6 landscape, BI 7.0, Portal, XI and HR Landscape. All other companies have their unique systems/landscapes with their own support personnel.
Issues at hand:
How do we setup Solution Manager to run multiple companies? Do we setup different Solution Landscapes and add each company systems to their own landscapes. How does this effect Service Desk/Charm setup ?
We also want to implement Service Desk / Charm / EWA and all the other functionality that is available in Solution Manager. Is there any advise on this issue and what are the potential pitfalls.
Is it possible to be setup multiple clients and have each company work in its own client.
I would appreciate any advice and information that will assist us with making an informed decision on the best way to proceed with this. I have done research and cannot find any information pertaining to this type of scenario. I'm hoping there are other customers that have a similar problem/issue.
Thanks and regards,
Ricky

Dear Ricky,
You are right. You sould create multiple solutions u2013 a solution for each company. Each solution comprises the landscape (systems) relevant.
I don't think setting up multiple clients and have each company work on its own client is a good idea. The solution manager supports monitoring and managing multipal solutions. By creating multiple clients you are loosing the advantage of one-point-of-entery. Besides, a lot of the customization in the SolMan is cross client.
Regarding the service desk:
You may create a sold-to-party business partner for each of the companies (transaction BP) and assign each sold-to-party only to the relevant system/iBase in transaction IB52. This will allow you to screen the messages in the service desk by a sold-to-party/company.
Regarding the EWA:
The EWA monitors the systems in the solutions. You may have as many solutions as you want.
Regarding the Charm:
Sorry, we didnu2019t implement it yetu2026 you should keep asking abour that.
If you would want to use Business Process Monitoring - this is solution based, so I don't see any problem there.
Hope it was helpful.
Good luck!
Adi Skutelsky

Automatic creation of business partners in Solution Manager system in Charm

When I automatically create business partners in the Solution Manager system from the users in the satellite systems, they are created of type "Business Partner (Gen)" and they are not associated to the user with the same name id in the Solution Manager system, but they are connected to the remote users in the satellite systems. For this reason I change manually every business partner making it of type "employee" and connecting it to the user in the Solution Manager system. In this way I can use it like partner function. Is this the correct procedure to follow? If not, what do I have to do? Which is the correct way to generate business partners in the Solution Manager system from the users in the satellite systems?
Thanks
Antonello

Hi,
It is advisable to have the same login name for the satellite systems and SOLMAN user.
Business partner can be created thru tcode DSWP -> Select Solution -> Edit -> Create business partner.
You need to create a business partner only once by the above method, even if you have a number of satellite systems.
Once the BP is created , go to tcode BP -> select the business partner -- > In the Identification Tab, enter the systems which will be accessed by the user. Here you can also give the SLM system ID in addition to the other satellite systems.
The employee connection process which you do is correct
Rgds
Abhijit

Error importing SP in Solution Manager System (phase XPRA_EXECUTION)

Dear community,
I have a fresh installation of Solution Manager System 7.1 (central system) in a test environment.
During post-installation I wanted to apply SP (user DDIC, client 000), but my update queue via SPAM failed in phase 23 (XPRA_EXECUTION) and I have no idea how to handle that. Error message:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-70203INSAPBSFND, tp step R, return code 0008
To check the cause of the error it is recommended to choose Goto -> Log -> Queue.
Choosing Goto -> Action Log, I find:
Error during executing the tp command 'tp XPA ALL SOL ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors', tp output:
Choosing Goto -> Import Logs -> tp system logs, I find:
START EXECUTION OF REPORTS SOL R      20120104111325              DDIC         biss-labor01
START tp_getprots          SOL R      20120104111325              DDIC         biss-labor01
ERROR SAPK-70203INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC         biss-labor01
ERROR SAPK-70204INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC         biss-labor01
ERROR SAPKITL701           SOL R 0008 20120104111335 STUSER       DDIC         biss-labor01
STOP tp_getprots          SOL R      20120104111338              DDIC         biss-labor01
STOP EXECUTION OF REPORTS SOL R      20120104111338              DDIC         biss-labor01
An excerpt (3 lines) from ulog:
APServiceSOL 20120104122229 RFC: tp SHOWPARAMS SOL pf=
biss-labor01sapmnt     rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt     rans (pid=6232)
APServiceSOL 20120104122229 RFC: tp CONNECT SOL pf=
biss-labor01sapmnt     rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt     rans (pid=6232)
APServiceSOL 20120104122231 RFC: tp XPA ALL SOL pf=
biss-labor01sapmnt     rans inTP_DOMAIN_SOL.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=
biss-labor01sapmnt     rans (pid=6232)
What I already tried:
- retry importing
- stop and start the system, then retry importing
- check for background jobs (rdd* ) that failed via transaction SM37, but there are none that have been canceled
- reset buffers via transaction /$sync
Any input, suggestions or help is highly appreciated!
Regards
Sönke

Hi Sönke,
it seems we are making progress at last.
I'm afraid I didn't make my suggestion about splitting items very clear. I meant to say try applying your SPAM queue in several parts splitting up the packages affected so they are applied individually.
SAPK-70203INSAPBSFND
SAPK-70204INSAPBSFND
SAPKITL701
SAPKB70207
I think default behaviour for SPAM/SAINT is to calculate the entire queue automatically based on EPSIN but you can override this behaviour and choose to split your queue into shorter ones, you simply choose carefully the last package, apply this queue, then choose the next queue and so on until you are done. There used to be special notes which had recommended split points for package queues
EDIT: I checked your link and I don't think it is helpful unfortunately.
Best regards,
Mark.
Edited by: Mark Birch on Jan 11, 2012 2:07 PM

Create messages on Solutions manager system it self.

Hi ,
On our customer solutions manager system we don't have access to directly log messages via the solutions manager itself, but from the customers ECC (SAP production system)
When we select Help --> Create support message, we get the error "You dont have authorization to create a support message".
Would any one know how this restriction is made where you restrict users from logging messages directly on SM.
Its it a standard role with authorisation. If so please advise the role.
Thank you & regards,
Harshini.

Dear Harshini,
I dont know if in solution manager additonally a authorization is needed maybe you can ask one colleague by open a ticket under component SV-SMG* . For Service Marketplace your user id must have the authorization object" create sap customer message".
Best wishes,
Dragana Manojlovic
SMP TECH Senior Support Consultant II | AGS Primary Support | Global Support Center Austria
SAP Österreich GmbH | Lassallestrasse 7b | A-1021 Vienna | Austria

ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM.

Dear Experts,
I am in the process of ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM. Since the solman database is increasing randomly i need to archive the old tickets amd also the tables and also the other objects.
Can any one help me how to archive and also what are all the objects to archive in the solution manager system.
Regards,
Umesh

Dear ALL,
I have got he table ARCDEL_OBJ ( Control Table for Archiving / Deletion) table I guess in this table the archiving objects will be stored.
The objects i got in this table are
CA_BUPA
CMS_PRJASM
CRM_ACT_ON
CRM_COMP
CRM_IPMCON
CRM_IPMPUC
CRM_IPMSAC
CRM_LEAD
CRM_LEAS
CRM_MKTPL
CRM_MKTSC
CRM_OPPT
CRM_RAGR
CRM_SACONT
CRM_SALDOC
CRM_SDBPBL
CRM_SDBSOL
CRM_SERORD
CRM_SRCONT
CRM_SRVCON
CRM_SUR
CRM_UBBPOL
CRM_WTYCLM
PRODUCT_MD
CAN I ARCHIVE ALL THESE OBJECTS OR WHICH OBJECT HAS TO TO BE ARCHIVED IN THIS..............?????
PLEASE LET ME KNOW THE IMPACT OF ARCHIVING THESE OBJECTS.
Regards,
umesh

How many solution manager systems can a satellite connnect to?

Similar Messages

Maybe you are looking for