How to activate planning version

hi,
sap gurus,
in which t.code we will create planing version for product allocation.
please explain how to activate planning version in product allocation. when we go T.CODE MC93
there the planning version 'A00' showing active instead of '000' which works as a updation when ever requried.
regards

Dear,
A00 is active version
What we need to do is create inactive version say 001 or 010 anything and forcast sales plan or production plan
Creat sales plan in MC87 and then goto MC88 make this inactive plan to active plan which system automatically takes to A00
Logistics u2192 Production u2192 SOP u2192 Planning u2192 Version Managementu2192 MC78 Copy
So here in the Source Version Provide the SOP version that you have created,
In the Target Version give Version A00
Hope clear to you.
Regards,
R.Brahmankar

Similar Messages

How to activate evaluation version of SQL server

How to activate evaluation version of SQL server 2012 with open license.
in the VLS portal it is saying no product key is require. but my problem is i already installed evaluation version of SQL server 2012 and configure many things to it. after that i got open license from Microsoft,

Hi,
If you want to upgrade ( i Guess this is what you want) evaluation edition to enterprise or standard you need to run Ent/ standard edition from setup.exe installation window will pop up on that select maintenance on left side and then select edition
upgrade.
Take help of below link
http://blogs.technet.com/b/sqlman/archive/2010/03/16/sql-server-2008-upgrading-to-standard-enterprise-edition-from-evaluation-edition.aspx
revert if any issue.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Setting plan version as default

Dear Expert,
How to setting 'plan version', for example: plan version 1 as default in tcode :
s_alr_87013613 (Plan/Actual comparison)?
What is the effect to others reports then?
Thanks in advance.

The variable that is used in this report is 1VERP. You can changed this via GS12 to enter the whatever plan version to default under the default value. For your information, the report group 1AIP is run when you run the t-code S_ALRr_87013613, which inturn runs the report 1AIP-001 that incorporate the variable 1VERP under the plan data for version selection.
But this may not be the best practise, because you will be changing the SAP standard, which will be overwritten when you upload support packages or do an upgrade. Better you copy this report and use your own version variable, by copying the 1VERP.

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

How do I activate AUTOMATIC superscripting for numbers / dates; e.g. 1st, 2nd, 3rd, 4th, etc .... It used to do this in all PRE-5.0 versions of Pages; now, it is GONE from Pages 5.0, and I cannot find out where / how to activate it !!

Whilst I appreciate your responding - I do not think this helps with what I was enquiring (at least not without further explanations anyways).
I am aware of, and do use, the function - System Preferences > Keyboard > Text - for various replacements like (tm), (c), etc .... and also for fractions like 1/2, 1/4, 1/3.
However, my question was in relation to SUPERSCRIPTS for dates / numbers - namely, superscripting numerical suffixes for things like 1st, 2nd, 3rd, 4th,
So - please help - HOW do I set this up ? If indeed it is possible without System Preferences > Keyboard > Text ???

How to add "Cost Plan Version" and "Planned Cost" into CNE5 report?

Hi,
I would like to display Cost Plan Version(VERSN) and Planned Cost in the CNE5 report.
How to retrieve Planned Cost that based on the Cost Plan Version ?
Appreciate helps. Thanks.
Regards,
See Mun

Plan versions: A plan version is created in accounting and stores different cost plans for a project, such as an "optimistic" and a "pessimistic" plan.
Now coming to plan version 0 is verson where actaul cost is updated in your organisation.
Plan version 1 is used for the planning...
How to see the same in CJE5 is suggested by Virendra..
However there is no filed name planned cost in report but the name of the filed is Proj.cost sched.000
with which you can achieve your result.
path is run txn CJE5>give your Project no.> F8> in new screen> F5-->in new Window scroll down in the right side for the Proj.cost sched.000 filed > with select take the same to left side>Enter--> values will displyed for this field in your report.
similarly you can use the other fields as well... take help of F4, to know the meaning of fileds.
Regards
Nitin
Edited by: Nitin Patoliya on Jan 17, 2009 11:18 AM

How to get active plan version dynamically

Hi all,
I am making some HR reports in which I am pulling up position long text from hrp1001 by giving condition - where plavr = '01' . Now if the active plan version is not 01, my condition becomes vague.
Please let me know how to determine the active plan version dynamically in my sample code below
SELECT APERNR AOTYPE B~STEXT INTO CORRESPONDING FIELDS OF TABLE ITAB_EMP_DEATILS3 FROM PA0001 AS A
INNER JOIN HRP1000 AS B ON BOTYPE = AOTYPE AND BOBJID = APLANS WHERE ( BOTYPE = 'S' AND BPLVAR = '01' AND AENDDA = '99991231' AND BENDDA = '99991231') AND A~PERNR IN PNPPERNR.
SORT ITAB_EMP_DEATILS3 BY PERNR.
DELETE ADJACENT DUPLICATES FROM ITAB_EMP_DEATILS3.

Simply call FM RH_GET_PLVAR

How can i check Rapid planning version installed in R12 E-Business suite .

How can i check Rapid planning version installed in R12 E-Business suite .
Please let me know.

Hi;
Please check below doc:
Information Center: Rapid Planning [ID 1391411.2]
Information Center: Rapid Planning Patch and Maintenance [ID 1395694.2]
Regard
Helios

How do I activate trial version of PSE8

How do I activate trial version of PSE8 (I already have the serial number)

If you have already fully installed the trial version but skipped or overlooked entering the serial number...
uninstall PSE8 by using your PC's uninstall facility
have serial number handy (it is in the format: nnnn-nnnn-nnnn-nnnn-nnnn-nnnn)
reinstall by executing Adobe's PSE8 installation .exe file
about 75% of the way through the installation process, i.e. at the Product Configuration stage, insert the serial number when requested, making sure you include the digit separators - - - - - between each of the six groups of four numbers.
continue with installation

How planning version can be intialized?

How planning version can be intialized?
Am not getting product and location in /SAPAPO/SDP94
above error is coming in slection.
Best luck

Girish,
Sounds like you are jumping the gun a bit. You have to set up DP and SNP before you can use any planning books.
To initialize a planning version. /SAPAPO/MSDP_ADMIN. Your MPOS must already be active. Then, select your planning area, right click. If you have no Time Series objects, you will see a menu "Initialize Planning Version". If you have any time series object, you will instead see "create time series object". Executing either one of these will initialize the planning version and the planning area. When you are done, you should have a green light on the Planning Area.
There are a number of steps besides this one that must be performed before you can use your planning books. I suggest you take a look at Best Practices Configuration guide, which will describe the necessary steps.
Demand Planning
http://help.sap.com/bp_scmv250/BBLibrary/Documentation/DPL_BB_ConfigGuide_EN_DE.doc
Supply Network Planning
http://help.sap.com/bp_scmv250/BBLibrary/Documentation/B06_BB_ConfigGuide_EN_DE.doc
Best Regards,
DB49

HOw to set our Existing Active plan version to The new Created Client.

Hello experts,
I have create two new Clients for idoc processing .
But when i am creating partner profile for my Model View the system gives an "error that no active plan version exist."
is there any way to solve this problem ????
Regards,
Dakshaini.
Moderator message: only one thread per issue, please.
Edited by: Thomas Zloch on Oct 14, 2011 3:43 PM

Please try uncommenting the following line in your method call.
* IS_PRINT = GS_PRINT
Regards,
Rich Heilman

How to activate the ATP buckets in APO?

Hi,
We are in the process of changing the ATP buckets in our APO system.
I know the Path in the configuration:
Advanced Planning and Optimization -> Global Available-to-Promise (Global ATP) -> General Settings -> Maintain Global Settings for Availability Check
On the left side you will get three sections:
Global Settings
ATP Buckets (Active)
ATP Buckets (Planned)
I can change the values in (example field Shift Receipt Bucket) the ATP Buckets (Planned) section and save it with a transport. Now the question is how to activate the buckets. Is there another transaction for this? SAP Help doesn't specify how to activate.
Any ideas are highly appreciated.
Thanks,
Mahesh

Hi,
To activate the buckets one need to check the box 'Current' in the options under ATP Buckets (Active). Also, as referred earlier by Dipthi do look up the documentation under:
SAP Advanced Planning and Optimization (SAP APO) -> Global Available-to-Promise (Global ATP) -> Settings for Global ATP -> General Settings for Global ATP ->Definition of Buckets for ATP Time Series ->Activation of Bucket Parameters for ATP Time Series.
The details are as beneath:
Use
If you change bucket parameters (see Definition of Buckets for ATP Time Series), these must be activated subsequently for the ATP time series.
Features
The system activates the bucket parameters in the following situations:
Since activation in each of the situations described below leads to downtime, you should change bucket parameters less frequently than other Customizing settings.
·        Creating the active planning version for a client using transaction /SAPAPO/MVM
If you set up a system again, you should process the bucket parameters before you create the active planning version. The bucket parameters are thus activated automatically.
·        Initializing SAP liveCache for all clients using transaction LC10
In the case of an upgrade, you should process the bucket parameters before activating SAP liveCache. The bucket parameters are then activated automatically.
·        Executing the report /SAPAPO/OM_ATP_REBUILD_TS
The system only rebuilds the ATP time series here.
In this case, the SAP liveCache administrator must execute the following steps:
                            a.      Shut down SAP liveCache.
                            b.      Replace the com-file registration:
                                                  i.       At command line level, go to the SAP subdirectory of the SAP liveCache installation.
                                                ii.       Under Microsoft Windows, save the original registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst), for example, by renaming or copying to another directory.
                                               iii.       Under Microsoft Windows, rename the registration file SAPAPO_REBUILD.lst as SAPAPO.lst (UNIX: libSAPAPO_REBUILD.lstas libSAPAPO.lst) or copy it to another directory.
                                               iv.       Under Microsoft Windows, rename the registration file SAPATP_REBUILD.lst as SAPATP.lst (UNIX: libSAPATP_REBUILD.lstas libSAPATP.lst) or copy it to another directory.
                            c.      Launch SAP liveCache.
                            d.      Execute the report /SAPAPO/OM_ATP_REBUILD_TS.
                            e.      Shut down SAP liveCache.
                              f.      Replace the com-file registration by replacing the registration files SAPAPO.lst and SAPATP.lst (UNIX: libSAPAPO.lst and libSAPATP.lst) with the original versions under Microsoft Windows.
                            g.      Launch SAP liveCache.
Regards
Vinod

How to activate the elements in KANK

We have created a new Controlling Area with a new Company Code.
All of the Finance config is done and basic PCA and CCA is required.
I have maintained all of the settings in OKKP, plan versions etc.
Now we are looking at t code KANK which is assigning the number ranges.
I have used this before, however normally for the Controlling Area the elements are there.
I have tried copying from "0001" but is says there are no elements assigned to my Controlling Area.
Can someone remind me how this is done, or what steps I have missed.

I agree with what you are saying, that was my udnerstanding too.
In OKC1 the values are there.
If I check 0001 as the Controlling Area the elements have been assigned to the groups.
However when I try and display my Controlling Area nothing is shown in the groups, ranges etc.
In the overview button there is nothing there for my Controlling Area just that for the other ones.
Have I created the Controlling Area wrong? Do I need to assign something to it to activate the elements to my Controlling Area?

How to activate Extended Rebate Processing in Customizing for billing?

sap gurus:
How to activate Extended Rebate Processing in Customizing for billing?

SAP Knowledge Base Article
1520390 - Activation of Enhanced Rebate Functionalities - IMG Customizing Transactions - SAP Menu
Version 1 Validity: 19.10.2010 - active
Language English
Symptom
Enhanced Rebate Functionality is not available and should be activated
In the customizing IMG (Transaction SPRO) the node for Extended Rebate with the relevant customizing transactions are not visible
The SAP Menu does not include the transactions for Extended Rebate
Environment Enterprise Function EA-ISE must be available in the system (visible in transaction SFW5).
Reproducing the Issue
Call transaction SPRO
Node Extended Rebate Processing is missing:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
             > .................
Resolution To activate the Extended Rebate Processing and make the node and customizing transactions visible proceed in the following way:
Call transaction SFW5
In the folder ENTERPRISE_EXTENSIONS choose the function EA-ISE
Activate this enterprise extension
Thereafter the menu path in SPRO for Extended Rebate Processing will be visible:
IMG
Sales and Distribution
   > Billing
        > Rebate Processing
            > Extended Rebate Processing
                        * Settings for Agreement Types
                        * Set up Variable Key for Rebate Settlement
                        * Check Variable Key for Rebate Settlement
                        * Activate Extended Rebate Processing
                        * Simulate And Execute Reorganization of Statistical Data
Furthermore the users will have the relevant transactions available in the SAP Menu:
SAP menu
> Logistics
     > Sales and Distribution
          > Billing
               > Rebate
                    > Extended Rebate Processing
                         * RBT_ENH_VB7 - Extended Rebate Settlement
                         * RBT_ENH_ACT - Update of Indirect Sales
                         * RBT_ENH_PLAN - Update of Indirect Planning Data
For futher infomation on the extended rebate process please refer to the following links of SAP help portal:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/5a/5b9b3c0f4da40ee10000000a11405a/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/79/a5ee3c1f63a518e10000000a11405a/frameset.htm
Keywords
Extended rebate agreement, extended rebate processing, erweiterte Bonusabwicklung, Menü, Pfad nicht vorhanden, aktivieren, erweiterter Bonus, Bonusabsprache
Header Data
Released On
21.10.2010 08:01:20
Release Status
Released to Customer
Component
SD-BIL-RB-ENH Enhanced Rebates
Other Components
   SD-BIL-RB Rebate Processing
Priority
Normal
Category
How To
Product
Product
Product Version
SAP ERP Central Component
All versions
SAP R/3 Enterprise 4.7
All versions

Planning Areas - No initialized Planning Version(s) exists

Hi,
Recently our SCM system was upgraded from SCM 4.0 system to SCM 5.0. After the upgrade I find in /sapapo/msdp_admin the planning areas in status red with message "No initialized Planning Version(s) exists". If I check the planning area it says "No errors found when checking the planning area".
Please help. How to initialize a planning version. I am new to SCM.
with regards,
Mohan.

Hi,
Thanks Mikhail.
When I try to Create Time Series Objects for a Planning Area from /sapapo/msdp_admin
I get the error "Master planning object structure 9ADPBAS is inactive".
Then I tried to activate the planning object structure 9ADPBAS from /sapapo/msdp_admin but I get "Error occured during activation". I do not find any log also. The long text shows as below.
=============================
Error occured during activation (see log)
Message no. /SAPAPO/TSM154
Diagnosis
An error ocurred during activation.
The planning object structure has not been activated.
Procedure
For detailed information, see the corresponding log; a log is only created if logging has been switched on. You switch on the application log from the main screen for editing planning object structures under Extras -> Log on/off.
=============================
ow to activate these structures and also how to activate the log for it ?
Please help,
with regards,
Mohan

Plan version and org structure

Dear all,
As the company is planing to change/expand it's org structure, they created a new org structure. Someone said that, we can do future planing in by creating a dummy org structure and once it's approved, we can make it as original and will keep the old org structure for reference. And to activate the new org structure, we need to create a new plan version.
So my question is,
1. How to assign/link the new org structure to the new plan version? How can we make sure that the new changes (eg. any new joinee) will effect only in the new org structure and not in the old org structure?.
2. How to transfer the old org structure details to the new org structure?
Regards
ET

Hi Thomas,
You can copy your active org structure through Tcode (RE_RHCOPL00 - Copy) then in Table T77S0 make the Plogi - Plogi switch as 02 that is your alternate plan version. Then through PSO0 you can set this plan version.
Hope this helps.
Shrikant

How to activate planning version

Similar Messages

Maybe you are looking for