How to add a delay step

Hi,
we have come across a issue in work flow. And we have very little idea on work flow.
Can any one please let me know how to add a delay step behind existing step X.
Also let me know how to do below options to perform this operation like
1. Like in ABAP delay for few seconds
2. Or simply making use of desired start time logic.
Thanks in advance.
PRaneeth

Delay?
You mean that you want to stop the execution of the workflow for a specific period, right?
Like in ABAP delay for few seconds
This can be handled by using a WAIT STEP of the workflow, I meanthe use of this wait step is , in brief, if at all you want to stop the execution of the workflow until a specific Event is raisedthe workflow execution stops and as soon as the specified event is raised then the remaining part of the workflow is executed.

Similar Messages

How to add a Wait Step in BPM for the synchronous send step

Hi,
we have a scenario where in one of the step in BPM is a synchronous step which sends data to ECC system and gets the Respose .
The Requirement is that we need to add a wait for the Synchronous step in BPM as the data sent to RFC(ECC) need to get comitted before sendng the response which requires some wait time.
Currently we are getting the Response to PI from ECC where it was reported as the response is not correct.
Is this possible to add wait

> Is this possible to add wait
No, this does not make any sense.
The BPM waits for the response anyway.
You could change the scenario to an asynchonous pair of messages.
But in my opinion the error is inside the ECC, because the response from ECC is not correct.

How to add a delay, sleep() doesn't seem to work

I need to add a 1 second delay before calling a next function like
[self playStop];
sleep(1);
[self playGo];
But it just pause 1 second and then execute both playStop and playGo. Any idea?

Sleeping on the main thread is not a good idea as it will block UI updates as well - try using a timer instead:
[self playStop];
[NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(playGo) userInfo:nil repeats:NO];
Andreas

Need to know how to add a delay between code

I need to add delays between the following lines of code. Any ideas?
speed=speed*.98;
//Delay here
speed=speed*.50;
//Delay here
speed=speed*.1;

You can't add delays in the way you show, but you can build those delayed lines into functions and have the calling of the functions delayed. Look into the setTimeout() function as one possibility. setInterval() is another, though it can require more maintenance.

How to Add Non SAP steps in test package

Hi Experts,
As our Client requirement is to load end to end test scripts/packages in solution manager. which includes non sap systems where it does not have URL and that legecy system contains 4 to 5 legecy steps(i.e as a place holder as text) along with 5 to 6 sap steps.
in solution manager test package should show all sap and legecy steps(i.e as a place holder as text) which is total 10 to 11 steps.
Can any one guide me on this please.
Regards,
Naveen Gunda

Hello Naveen,
the approach for non-SAP steps is more or less the same like for SAP steps using SOLAR02.
The only difference in your case (without URL) is that you can't assign a test object to the related test document and so navigation to the system under test will not work.
General Infoamtion regarding Test Management in Solution Manager can be found in our Wiki page in section Test Option 1.
http://wiki.scn.sap.com/wiki/display/SM/SAP+Solution+Manager+WIKI+-+Test+Management
Let me know if you have further questions.
Kind Regards Reiner

How to add button delay in menu?

I have a video as part of the menu. It runs for 10 seconds then freezes. I don't want the menu buttons to appear until 9 seconds into the video then stay visible anc active with the frozen frame. Is this possible?
I am running DVD Studio Pro 3.0.2
Thanks in advance!

Set the duration to 10 seconds in the inspector then the loop point to 9
Make sure to make the highlights outside of DVD SP (Photoshop overlay made to pict or tiff) and use that for highlights/buttons
This shows the steps to make an overlay and apply it, the items in the graphics will not show until lopp point
http://discussions.apple.com/thread.jspa?messageID=7781380&#7781380

How to add a time delay of microsecond in labview 2011

can you please help me, how to add a time delay of microseconds in labview 2011 version . I expect a helpful replies

A delay between what and what?
Is this plain LabVIEW, LabVIEW RT, or LabVIEW FPGA? What kind of data acquisition hardware are you using?
What is your OS? An accurate "software only" delay of microsseconds is not possible on windows or any other general purpose OS.
perumpadapu wrote:
... I expect a helpful replies
To get a helpful reply, you need to provide much more detail on what you are trying to do!
LabVIEW Champion . Do more with less code and in less time .

How to add Substitution fields after prerequisite (in step)

Hi,
Can anybody help me how to add substituion fields after prerequisites.Any configuration steps would be helpful except sap help.com.
Thanks&regards,

Hi,
I am sorry , i hope, my question was not clear to u. In OBBH i have created Substitution, Then created prerequistites, For that prerequisites i want to add substitutions(for fulfilled requirements).
Substitution
   step
      prerequisite
          substitution fields
HOw to create the aboue substituion fields, or any configuration could you please provide me.
Thanks in advance,
Veena

How to add a field in the step Variables

Hi guys, how to add a Field array to the Step Variables?

Do you mean how to add properties to a Step Type?
Steps are instances of Step Types so you can not add properties. If you need to add property to say a Numeric Test Limit step type, then you have to create a Custom Step Type based on a Numeric Test Limit Step Type then add your additional properties. Check out the TestStand documentation for Custom Steps Type.
Depending on your needs you might beable to use the Add Attributes to meet your requirements, depends on what TestStand version you are using. This could save you the bother of having to create your own step type.
Regards
Ray Farmer

How to add outcome to activity step

Hello everyone. Does anyone know how to add a possible outcome to an activity step that is not of type user decision? I know this is possible as I have seen workflows like this. Please help. Generous points will be awarded!

Hi,
I don't think OO does result parameters. To be honest, I've never really liked them due to the way that the outcome definition is so far removed from WF. This makes it easy for someone to change the domain without updating the WF and mess things up. There's no simple "where used" that tells an ABAPer about such usage in WF.
So just bind back a value and check it in a separate condition step. Or use exception classes. If they are subclasses of CX_BO_ERROR they will automatically appear as outcomes. Which way you choose is a matter of semantics - if the results are 'nonstandard' situations then they could be exceptions. If it's a set of choices then a condition will do. There's no major performance hit for a condition or container operation step.
Hope that helps,
Mike

How to add Delay in Servlets

Hi Experts!
I need to ADD MANUAL DELAY in my Servlet ...how do I do that in Servlets...? Which commands to use?

Hi:
Could you let me take this place to ask a question? I meet the problem that the response is too late, so it generate the TCP/IP connection error. Is the session time out? How can I do to solve the problem?

How to Add Steps to an SAP Job

Hi Gurus,
I want to add two new Abap steps in an SAP Job
Ex: ZSAPPEW1 : SAP Job
I had 7 Abap steps in this job
I want to edit this job and add two more steps after 5th Abap Program /Step
May I know how to do this without creating a new job ?
Regards
Sandeep

Go to SM37 >> Select Job name >> Change mode >> STEP >> Create step (Add other steps)
OR
Create a new job with all steps and remove the old one.
Regards,
Nick Loy

How to add Favorites in EP ? Pl... provide steps in details....urgent

Hi All
     How to add Favorites in EP ? What and settings i need to do ?
    Can any one help me on this and this is urgent for me ?
    In general what is content we will keep in this Favorites ?
Thanks and Regards
Rakesh

Hi,
You can "add Favorites in EP" by clicking on the image available next to forward link in the title bar of the portal
Various options like
Open in New window
Refresh
Personalise
Details
Add to Browser Favorites
Add to Portal Favorites
When you click on "Add to Portal Favorites" then the particular iview is added in the portal favorites iview section. which is displayed below the detailed navigation.
Example if you add the iview present in the Content administration --> K M Content
you can add the KM content iview in the favorites.
Now if you are present in the System Administration --> Portal Display --> Theme Editor then you can navigate to KM iview directly without going through Content administration --> KM Content.
This reduces the number of navigation paths.
Hope this helps you.
Thanks and Regards,
Gauri Gosavi.

How to add delay in media player?

I want to play a video in my GUI and I want to add some delay so their is any method to add delay before the the player start to play a video.

The following code would wait 10 seconds and then start a player...
SwingUtilities.invokeLater(new Runnable() {
    public run() {
        try {
            player.realize();
            player.prefetch();
            Thread.sleep(10000);
            player.start();
        catch(Exception e) {
            e.printStackTrace();
});

Can someone please tell me how to add studio starting things like paramount, universal studios. step by step please

i need to know how to add famous copmany logos to imovie ike paramount and stuff pls

to imovie
pls

How to add a delay step

Similar Messages

Maybe you are looking for