How to add subpartitions to the existing subpartition template

Hi All,
My Question is ,how to add Subpartition to the exiting subpartition template. e
like i have created a table with subpartition template with with 5 subpartitions like
subpartiton one_1 value (121)
subpartition two_2 value(122)
and now i one to add one more subpartitin to the existing subpartition template(Like modify the existing subpartition templete).
subpartition three_3 value(123)
Could any suggest me.
Thanks
Sree

>
My Question is ,how to add Subpartition to the exiting subpartition template.
>
Follow the example in the section for 'Modifying a Subpartition Template' in the VLDB and Partitioning Guide
http://docs.oracle.com/cd/E11882_01/server.112/e25523/part_admin002.htm#i1007904
>
You can modify a subpartition template of a composite partitioned table by replacing it with a new subpartition template. Any subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS) now use the new subpartition template. Existing subpartitions remain unchanged.
If you modify a subpartition template of an interval-* composite partitioned table, then interval partitions that have not yet been created use the new subpartition template.
Use the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:
ALTER TABLE emp_sub_template
SET SUBPARTITION TEMPLATE
(SUBPARTITION e TABLESPACE ts1,
SUBPARTITION f TABLESPACE ts2,
SUBPARTITION g TABLESPACE ts3,
SUBPARTITION h TABLESPACE ts4

Similar Messages

How to add id to the existing Authorization Object

Hi,
I want to add one id to the existing Authorization Object,How to add this?
Here is my Object and existing ID's
authority-check object 'Z_W2WALL' for user sy-uname
          id 'ZFREEZE' field r_freeze
          id 'ZLI01' field r_li01
          id 'ZLI11' field r_li11
          id 'ZLI14' field r_li14
          id 'ZLI11R' field r_li11n
          id 'ZLI20' field r_li20
          id 'ZMI10' field r_mi10
          id 'ZUPLOAD' field r_upload
          id 'Z_ARTFRZ' field r_artfrz.
Now for this i want to add
id 'Z_BIN' field r_frz.
How to do this?
Thanks

Hi Sai,
as there are already defined other id's have been added, you could also do the same way
but this will also done through your basis end, where for this id your basis team will provide the
authority to this id for the same purpose..
authority-check object 'Z_W2WALL' for user sy-uname
          id 'ZFREEZE' field r_freeze
          id 'ZLI01' field r_li01
          id 'ZLI11' field r_li11
          id 'ZLI14' field r_li14
          id 'ZLI11R' field r_li11n
          id 'ZLI20' field r_li20
          id 'ZMI10' field r_mi10
          id 'Z_BIN' field r_frz
          id 'ZUPLOAD' field r_upload
          id 'Z_ARTFRZ' field r_artfrz.

How to add tags to the existing XML file?

Hi,
I have a requirement wherein I have to add a tag to the existing xml data.
For Eg:
<ROW>
<EVNT_ID>7333976</EVNT_ID>
<DISTRCT_CD>67</DISTRCT_CD>
<TIME_OFF>06-May-2008 10:50:04 AM</TIME_OFF>
</ROW>
The desired output is,
<DI_DATA>
<ROW>
<EVNT_ID>7333976</EVNT_ID>
<DISTRCT_CD>67</DISTRCT_CD>
<TIME_OFF>06-May-2008 10:50:04 AM</TIME_OFF>
</ROW>
</DI_DATA>
I have to add <DI_DATA> </DI_DATA>at the start and end of the input.
Could any of you help me on this?
Thanks,
GV

If your XML is just in a CLOB, you can just use string manipulation to prepend/append the nodes on. If you have it in an XMLType you could just do the following
select appendchildxml(XMLTYPE('<DI_DATA/>'),
'DI_DATA',
XMLTYPE('<ROW>
<EVNT_ID>7333976</EVNT_ID>
<DISTRCT_CD>67</DISTRCT_CD>
<TIME_OFF>06-May-2008 10:50:04 AM</TIME_OFF>
</ROW>')) -- this would be your variable
from dual;which will put your data within the DI_DATA node.

How to add a column in existing DTW template

Dear Expert,
I want to add a column which is in table structure of JDT1 but in DTW template that column is not there...
In my JDT1 table that column has some value and i want that value to be enter thru DTW ..
Give me step because at some stage i m making mistake....i know..
please help me
Thanks
Kevin

In JE DTW there is not proficode column, but i want that column to be loaded ?
even i try by "target table" but still nt able to load of "profitcode" in that way
How to add an existing column which is there in JDT1 table but not in JE DTW template ?
Thanks
Kevin

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

How to add one column in existing search help.

Hi Folks,
My quesion is
How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
Shivam

Hi,
If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
I think this should help you to certain extent.
Regards,
Kranthi
Edited by: Kranthi on Jan 14, 2010 11:15 AM

How to add spaces at the end of record

Hi Friends,
i am creating a file which contains more than 100 records.
In ABAP i have internal table with on field(135) type c.
some time record have length 120, somtime 130 its vary on each record.
but i would like to add space at the end of each record till 135 length.
Can you please help me how to add speace at the end of record.
regards
Malik

So why did you said that in your first posting? My glass sphere is out for cleaning...
Instead of type c use strings and add spaces until they have the appropriate length.
loop at outtab assigning <pout>.
while strlen( <pout>-val ) < 135.
concatenate <pout>-val `` into <pout>-val.
endwhile.
endloop.

How to add marker on the clip?

Hi!!!
Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
Thanks!!!

Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
>
>
    Re: How to add marker on the clip?
    created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion

How to add request in the buffer

Hii All,
How to add request in the buffer in bulk.
i am using following command.
tp addtobuffer requestno <sid>
but after doing it is giving me the following error
C:\usr\sap\trans\bin>tp addtobuffer BWDK900161 BT1
^CThis is tp version 340.07 (release 640, unicode enabled)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Pls help.
Regards,
Viren.

Hi Rolf,
thax for your reply.
But still it is not working it shows following message.
C:\usr\sap\trans\bin>tp addtobuffer BWDK900051 BT1 pf=c\usr\sap\trans\bin\TP_DOM
AIN_BT1.PFL
This is tp version 340.07 (release 640, unicode enabled)
E-c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in c\usr\sap\trans\bin\TP_DOMAIN_BT1.PFL: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
Regards,
Viren.

How to add filter in the dist. model

hi,
how to add filter in the dist. model
thanks
Ruban

Hi,
Please try this.
1. Go to transaction BD64.
2. Click on Change button.
3. Expand the corresponding model view.
4. Expand the corresponding message type (i.e MATMAS).
5. Place the cursor to 'No filter set' and double click.
6. Click on Create Filter Group.
7. Add your filter from here ...
8. Once done, save the model view.
For more information, please check this link.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Regards,
Ferry Lianto

How to add Acrobat to the Microsoft Office ribbon?

how to add Acrobat to the Microsoft Office ribbon?

Hi ebender888,
What versions of Acrobat and Office do you have? See if this post helps: https://answers.acrobatusers.com/Why-Acrobat-PDFmaker-Office-COM-Addin-tab-disappearnig-Wo rd-Office-2013-q152959.aspx
If not, let us know what software you're using, and we'll try to get you pointed in the right direction.
Best,
Sara

HT5654 how to add videos to the ipad using the latest version of itunes

how to add videos to the ipad using the latest version of itunes ?

Hello zaraa90,
After reviewing your post, I have located an article that can help with syncing content. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
Sync your iPhone, iPad and iPod with iTunes using USB
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

How to add Video on the OAF page like youtube ?

Any one know how to add Video on the page?

If you are getting HTML code from one of these slideshow.com places, you can add this code to your iWeb pages with a little bit of work. Two things to keep in mind...1. No way to do this via iWeb directly, so it involves editing the published html files, and 2. Because iWeb republishes the html files whenever you update the your webpage, you will lose your changes and have to redo them to add your slideshows back.
The general directions are as follows...
1. Decide where you want your slideshow and know exactly what dimensions you need.
2. Insert a text box onto your page and adjust its size to exactly your dimensions.
3. Type in some uniquely identifiable text like, "SLIDESHOWHERE" without changing the font or anything else...just type it in.
4. Publish your page with iWeb.
5. Find the html file associated with your published page (either on your iDisk or in a folder depending on how you published) and open it in any text editor (like Microsoft Word, or Textedit, or anything). You may need to set your text editor to "ignore rich text" or to "show HTML source".
6. Scroll through the html file and locate your placeholder text, e.g. "SLIDESHOWHERE".
7. Replace the placeholder text with your html code and save your page.
That's it. You should see your slideshow element show up in Safari where you placed the text box in iWeb!

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

How to find time in the existing sap system

Hello all,
How to fine time in the existing sap system;where do find the define time in img;plz help me.
what is the difference between logical system and client?
plz sugest me
thanks in advance

Dear Sameer
Go to STZAC where you set Time in IMG.
Thanks
G. Lakshmipathi

How to add subpartitions to the existing subpartition template

Similar Messages

Maybe you are looking for