How to add tcode to role

I have the following rqrmnt,i have no idea how to do it as i have no knowledge of HR.
Customer would like the new t-code added to the following role:
Profile for role ZS:H_HR_PA_M_ADHOC_REPORTS and
ZC:H_BC_AS_M_PRODSUPPORT
Can someone please tell me what needs to be done.
High points can be expected.

Hello there.
Check tcode PFCG and the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/44/d9acfe7a012754e10000000a1553f6/frameset.htm.
Regards.
Valter Oliveira.

Similar Messages

How to add iview to role using webdynpro

Hi every one, Can you please tell me how to add iview to role using webdynpro code.
Thanks
TK

Hi,
could you copy / past your code ?
if you need help on webdynpro and your beginner, try to watch the video on internet of WebBProfessor. It's really good videos !
regards
Fred

How to add Administrative Groups(Roles) in 11g

Hi,
I am migrating the 9i query to 11g query. In 9i query I saw gpp table join to get the group owners. In 11g I didn't find the Administrative Groups(Roles) tab or section to assign administarive group to the group(Role in 11g). Where we can find this tab, if tab is not avilable then how can we assign the same group(role)? when data will populate into gpp table in 11g? Please guide me on this.
Thanks
Kishore T

hi,
are you saying you want to add custom Roles to 11G?
it's either on the Advanced page or the Administration where you can add new custom Roles.
there is also the RoleManager Service (API) that can add them programatically.

How to add/delete single role to/from CUA

Hi All,
I want to add/delete single role from CUA system. I found one FM to change roles i.e BAPI_USER_LOCACTGROUPS_ASSIGN , In function module documentation said that it will overwrites all existing roles with the roles in the table parameter.I dont want to do that. I need a FM to add/delete role to CUA system. Please help me with your suggestions.
Thanks,
Suman

I am not aware of another BAPI based way to do it. You will need to get the details of the Roles AND manual profiles assigned, and then re-assign the new set in the call.
Cheers,
Julius

How to add dynamically a role in a Request Template

Hi all,
We have created a job that reads roles from a custom table and creates them in IDM. We have also a request template of type Assign Roles that has all the allowed roles that can be assigned to a user. We have a requirement to add a role from the custom table in the IDM and also add it in allowed roles of the Request Template so that it will be available. Our problem is that we cannot find an API that we can call in order to add the roles in the request template. Does anyone know how we can do this?
Thanks in advance,
Kostas

Did you look at RequestTemplateService? I believe you can use this to modify your template pragmatically. Thus the step would be to read the custom table, create role in IDM and the modify the template pragmatically to add the newly created role in the available role which can be requested.
http://download.oracle.com/docs/cd/E14571_01/apirefs.1111/e17334/oracle/iam/request/api/RequestTemplateService.html
HTH,
BB

Reg: How to add role to a role programitically.

Hi All,
How to add a role to another role programmatically ?
My requirement is...
I have a super role S1 which has two sub roles R1 and R2.
I have two schedulers running. When scheduler-1 runs, I want role R1 to be added to super role S1 and the role R2 to be removed. When scheduler-2 runs, I want the role R2 to be added and role R1 to be removed from role S1.
Now my question is...how to add the sub roles programmatically to super role?
Thanks,
Shilpa.

Hi Shilpa,
sounds like you want to provide users with different content at different times. Have you ever heard about PCD Filtering? PCD Filtering allows you to hide or show parts of the content using arbitrary filter expressions. I guess you could also implement a PCD filter which filters content depending on the current time.
Check the article <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3367e690-0201-0010-d285-c69bd884c9f3">Filtering Role and Workset Content</a>, Shantanu's blog <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6370">Filtering Role Content by User Attributes</a> and the presentation <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/17968de1-0a01-0010-1f9f-c090fbc7001a">FilteringRoleand WorksetContentforDevelopers</a> for more information about PCD Filters.
Best regards,
Martin

How to Add transcation (hrclm001 Claim ASIA - Benefit) to ESS:

Hi Experts,
We are using Tcode HRCLM001, Claim(asia) in the backend, now we are using ESS ep 7.0 but we can't find any service for claim(asia), can somebody suggest me how to add tcode to ess? Thanks
Regards

Hi Hendri Salim,
I got the same issue with you.
Have you ever sovled your issue?
If done, please tell me how you do that.
It not yet, please keep dicussion.
My idea is creating new customized service by tcode SICF.
What do you think?
Thanks and Best Regards,
Minh Khoa

How can I add a user Role member that is from a different domain

We are currently building out SCOM 2012 R2 to provide monitoring as a service to some of our customers. As of now we have the RMS on our own department's domain (Domain A) which we have full control of and we have a gateway server that is on the company
wide domain (Domain B) so that we can monitor other departments devices as the leverage this system.
Monitoring is working just fine on both domains and we are just working on fine tuning SCOM so that we can roll it out as a service we offer to our customers. One of the next steps we are working on before rolling it out is giving specific users access
to view only their own devices, dashboards, and groups. So I created a Read-Only profile and went to add a user to test it out, but that user is on Domain B and SCOM is unable to resolve this account. I'm seeing Event ID 26319 with Error Code 1332.
How can I get SCOM to discover devices on a different domain so that I can give them different permissions for accessing the Operations Console and/or Web Console? Is this possible?
Here is the Error I'm seeing.
Log Name: Operations Manager
Source: OpsMgr SDK Service
Date: 2/4/2015 1:11:59 PM
Event ID: 26319
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxx.xxxx.xxxxxxxx.xxx
Description:
An exception was thrown while processing UpsertUserRolesV2 for session ID uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="OpsMgr SDK Service" />
<EventID Qualifiers="49152">26319</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-04T21:11:59.000000000Z" />
<EventRecordID>172748</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>xxxxx.xxxx.xxxxxxxx.xxx</Computer>
<Security />
</System>
<EventData>
<Data>UpsertUserRolesV2</Data>
<Data>uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40</Data>
<Data>The creator of this fault did not specify a Reason.</Data>
<Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).</Data>
</EventData>
</Event>
Thanks for any help I can get in resolving this issue.
Jake

The SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake

How do I add a feature/role to an offline .vhdx file?

Hello to Anyone that can help with this frustrating task that should be easy,
Ok I looked at Example 3 here:
http://technet.microsoft.com/en-us/library/jj205467.aspx
and tried to use that format to install features and files to a .vhdx file. I tried different syntax but no luck. I don't know what i typed wrong or what i should type? If i wanted to install dns to an offline .vhdx file and that file is in
my c drive, how would i type the syntax? I have tried and failed over and over again. Here are some of the syntax i have tried in powershell:
install-windowsfeature dns -vhdx c:\
install-windowsfeature dns -vhdx c:\VM TEST.vhdx
install-windowsfeature -dns -vhdx c:\
install-windowsfeature -dns -vhdx c:\VM TEST.vhdx
install-windowsfeature -name dns -vhdx c:\
install-windowsfeature -name dns -vhdx c:\VM TEST.vhdx
All these syntax are wrong and am frustrated. btw, the file i want to add dns to is "VM TEST.vhdx"
I have researched and found this video:
http://www.youtube.com/watch?v=r30BxBawNOE
but the guy doesn't give a specific example for me to follow in regards to location of his vhd file and I am using a .vhdx. Again all i would like to learn is how to add features and/or roles to an offline .vhdx file and i am trying with "dns"
since it is so easy to type. What would be the proper syntax? If anyone can chime in that would be great for this seems to be a simple 101 type of question especially for mcsa or mcse certified people out there. I am totally new to this and
can't do this one simple task. Help please.

Hi,
You install a feature/role to a VHD with the -Switch VHD (even if it is a .vhdx you are pointing at...)
See my example below, that installs the DNS server on a vhdx. The switch -IncludeManagementTools do also give you the management Tools for DNS (both Powershell and MMC...)
Add-WindowsFeature -Vhd "C:\SERVER.vhdx" -Name DNS -IncludeManagementTools
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure

How to add a role so user can do Export, Copy & paste Master Data?

How to add a role so user can do Export, Copy & paste Master Data? Thanks!

Add S_GUI to the user role.

How to add multiple users to a role in ECC 6.0

How to add multiple users (say 1000) to a role in ECC 6.0?

Hi
You can actually add multiple users to a role using transaction SU01. From SU01, use the menu Environment->Mass Changes.
Here you can manually add the users, select them by address or authorisation data. Once you have your user list, you can then add or remove roles and/or profiles.
Secondly , You can use SU10 to do mass changes to multiple users including role assignments per logical systems
Also check the following link:
http://www.sap-img.com/bc021.htm
I hope this should do it
regards
Chen

How to add my own tcode in easy access screen

hi experts
how to add my own tcode in easy access screen.
thanks in addvance.

Hi,
I guess by adding your own transaction u mean maintaining your <b>Favourites</b>, this you can do by right clicking on the Favourites option and select the option <b>Insert Transaction</b>.This will solve the purpose...Hope it answered your question.Do award points if it does.
Thanks.

How to Add Active Directory user to Admin Role

Hi All,
I am trying to figure out how to add a AD user to the Admin Role..
I am connected to AD and can see the user (myself), however, when I try to add myself to the admin role, it says user not found.
I go to Security Realms > myreals > Roles and Policies > Global Roles > Roles > Admin > View Role Condition.
I see that the Administrators Group is already added. Now I click "add Conditions" and select "User" from the Predicate List and type in the user " Doe' John".
On the next screen I get "user: John or Dow" does not exist.
Another option could be to add the user to the Administrator group, but I couldnt figure out how to do that as well. When I navigate to the user under Users or Groups, I dont see an option to add that user to the Administrator group.
Is it that you can only add users created in Weblogic to the Admin group?
Any help on this will be very appreciated.
Thanks in advance.

I think I got it. I had to add the AD group the user is part of to the Admin role.

How to add a role to the Portal Favorites

Hello gurus,
I have a role to add to the Portal Favorites to avoid drilling down to many levels, does anyone know how to add a role to the Portal Favorites?
Thanks in advance for your response.
Regards,
Niki Nguyen
Message was edited by:
        Niki Nguyen
Message was edited by:
        Niki Nguyen

Niki,
The documentation says that
The Portal Favorites iView contains a freely definable list of links for direct access to items that you use regularly. This can include the following:
●     Portal pages and iViews that run as full-page applications
●     Documents, folders, and other items in KM repositories
●     External items, such as Internet pages
So we can't do it for Roles.
For detailed information see <a href="http://help.sap.com/saphelp_nw04/helpdata/en/3a/d609e5803111d5992f00508b6b8b11/frameset.htm">Portal Favorites</a>
Mr.Chowdary

CRM2007 How to add a Web Dynpro ABAP application to a CRM business role

I am investigating CRM2007 UI framework and I cannot seem to find a way to add a custom made Web Dynpro ABAP Application (created in CRM 4.0) to a business role, or how to add a custom transaction created in classic ABAP (transaction created via se93, progam created via se38). Whatever I do, I only see BSP components. I am using transaction BSP_WD_CMPWB.
Next to this it seems you can add/integrate Visual Composer applications to (there is an entry in spro called "integration of the visual composer in BI"). However, I presume we first have to meet the requirements for the portal integration in SAP CRM 2007 as described in spro. If somebody knows how this works, that would be great!
kind regards
Angelique Heutinck

Hello Angelique,
It should be possible to call web dynpro applications from the L-shape menu of CRM UI (check transaction CRMC_UI_NBLINKS). As for the old GUI transactions, you can embedd them also via transaction launcher using CRMC_UI_NBLINKS (search for "transaction launcher" in this forum, there is plenty of information on it).
Best Regards,
Yevgen
Edited by: Yevgen Trukhin on Jun 19, 2008 11:53 AM

How to add tcode to role

Similar Messages

Maybe you are looking for