How to add USB storage to Server.app

I've recently moved to OSX for my development platform. I've installed the Server.app from the app store and need to start creating my development sites. The problem I'm having is that my 1TB USB 3.0 drive is not being seen by the Server.app's storage tab, thus not able to create website storage there. Can anybody please point me in the correct direction?!

Hurray! We have success! So the answer is that only drives formatted in the MacOS Extended format work within the Server.app. Props to Mark23 for his indirectly direct answer to adding USB drives to OSX server!

Similar Messages

HT1178 how to add usb drives to time capsule after initial setup

How to add USB hard drives to TC after TC is already setup then access the usb drives by both PC and mac?

1. Just plug them in. The drives need to be formatted as FAT16, FAT32, or Mac OS Extended (Journaled), and may need to be connected through a powered USB hub.
2. Click here for information.
(82647)

How to add a new j2ee server to PI system?

how to add a new j2ee server for our PI product system?
Is it to execute 'install dialog instance ' steps?
Thanks

Hello
I have moved this thread to the Netweaver Administrator forum (this is not a PI technical issue). You have a better chance of getting a quality answer to your query in the Netweaver Administrator forum.
Take the notes below into consideration after you have added the java node.
1) #734931 Using a J2EE cluster in the XI 3.0/7.0 environment
2) #1079478 Using a J2EE Cluster in the PI 7.10 environment
Can anyone assist with how to add a java node?
Regards
Mark Smyth
XI/PI Moderator

How to add BusinessPartner using DI server?

Hi expert,
     previous i used DI API for BP and Sales Order Add.Now i want to add BP and SalesOrder using DI server.Please help any expert ,
     1 How to add BusinessPartner with address using DI server ?
     2 How to add Sales Order using DI server ?
thanks & regards
Surajit

HI, Surojit
Use B1WS, it will be easy to develop the app with DI Server.

How to use USB storage on X3500

How do i set up for my Macbook to see the USB storage that I connect to the X3500? When I go to Finder>Network>X3500 SMB server, It said that Connection fail. However I can access it with no problem in Windows 7 using bootcamp.
I'm using Macbook pro retina running 10.9.3

@vickvohoang, make sure and verify the correct IP Address of your X3500 router. The 192.168.1.1 is only the default IP Address. It might be changed and you need to check it. To check:
1. Click the Apple icon then select the System Preferences… option.
2. Click the Network icon under Internet & Wireless.
3. On the Network window, click the Advanced… button. The default Location would be set to Automatic.
4. Click the TCP/IP tab. The Mac computer’s IP address, Subnet Mask and the router’s IP address will then be displayed.
Use the current Router's IP to map the network drive and you should be okay.

I have an iPhone4s and my storage has reduced unexplainably due to apps. How can recoup the storage (besides deleting apps because I deleted a lot of my apps already.)

My phone's storage space is depleting rapidly. It is mainly apps taking up this space, but I honestly don't have a lot of apps on my phone. The apps should only take about .6 gigs and they are taking up almost 5 gigs or storage. The apps that are taking up the most room are Instagram and Pinterest, which are internet sights, so to me it doesn't make sense why they are taking up all of the storage room if they are backed up to the internet. I know I really don't know a lot about this stuff, but it would really help if someone could explain to me what is going on and how I can fix the problem without completely deleting the apps if that is possible.

Alright, super weird, but looks like it's fixed. I should note that before I tried anything, I deleted enough stuff so that I had plenty of space left for updates. I held both buttons down until the phone turned off and then turned it back on. Still the same issue. Maybe half an hour later as I'm thinking about how I'll have to try to restore the phone, the screen lights back up on it's own and shows the lock screen...like someone had pressed the home button, even though I pressed nothing. I unlocked the phone to see if I had a missed call or text or something and noticed that the "stuck" apps had updated and everything was working again. #applemagic

Air iOS - How to add iPhone 6 icons to app.xml?

I'm using Flash CS6 and Air 3.9 to publish an iOS app.
How to add the icons for iPhone 6 and iPhone 6 Plus to the app.xml?
I tried this but got an error:
<icon>

<image120x120>AppIcons/app_120.png</image120x120>
<image180x180>AppIcons/app_180.png</image180x180>
</icon>
Any help appreciated.
Thanks

Hi,
Thanks for reporting, but things are working fine at our end. Could you please tell us the error you are observing. Also i would recommend you to use latest SDK and Flash pro.
Thanks,
Jitender

How to add a second DNS server entry

Our primary DNS server is having problems (internal system) - we want to keep its listing on our mac server however. We need to add a second DNS server - we don't care what it is, we might want to add 2 additional servers - one internal and one external (google dns for example).
How do we do this through server admin? Thank you.

Solved. Added entreis in DNS section of Server Admin. Adjusted DNS entry in network section of system prefs to reflect loopback address. Stopped and restarted DNS. Thanks.

How to add Ftp transfer to my app???

I need to upload htm files to my ftp server.
I'm new to java and I need to know if I need and API to add this capabilities to my app or if there is a class that can do this.
Do you know a link where I can get some ftp code samples?
Thank
Diego

J? napot, Laszlo.
I suspect the problems are much bigger than that.K?sz?n?m sz?pen, Ferenc -- the f is for Ferenc, isn't it? -- but just because we among the chosen who've done their dissertation on CLASSPATH doesn't mean we can't share out enlightenment.
Suggestions:
1. Download the right zip file: it's Commons Net, not Commons Upload.
2. Unzip it to find the file commons-net-1.1.0.jar.
3. There are many things you can do with this jar: put it on your CLASSPATH, refer to it using a command line argument etc... but perhaps the simplest way (assuming you're working on your own machine so there's no one to object to it): make it an extension: copy it into the appropriate jre/lib/ext directory . Where is this? It depends on your set up, but if you've installed the jdk, you should have a path like C:\j2sdk1.4.2etc...\jre\lib\ext and there's another copy of the jre in C:\Program Files\java\jre1.4.2etc...\lib\ext. You might as well copy the jar into both locations -- can't hurt.
4. Take a look at the docs you unzipped to find out the right inport statement and some sample code. For example, FTPClient's doc includes:
import org.apache.commons.net.ftp.*;
try {
      int reply;
      ftp.connect("ftp.foobar.com");
      System.out.println("Connected to " + server + ".");
      System.out.print(ftp.getReplyString());
      // After connection attempt, you should check the reply code to verify
      // success.
      reply = ftp.getReplyCode();
      if(!FTPReply.isPositiveCompletion(reply)) {
        ftp.disconnect();
        System.err.println("FTP server refused connection.");
        System.exit(1);
    } catch(IOException e) {
      if(ftp.isConnected()) {
        try {
          ftp.disconnect();
        } catch(IOException f) {
          // do nothing
      System.err.println("Could not connect to server.");
      e.printStackTrace();
      System.exit(1);
    }Viszontl�t�sra!

E3000 USB Storage / Media Server - Web access?

I just set up an E3000 router and haven't any problems so far. I have a question about the USB storage and/or Media Server though.
I hooked up a USB drive to the router, and it works just fine via Windows Explorer. Is there a way to access it through a web browser though? I'd like to access the drive from my Wii if that's possible, so is there a way, possibly with the media server? Mainly, I want to play videos from the drive on my TV, but I don't have a fancy internet-enabled TV
Thanks in advance.

I think you can try to upgrade/re-flash the firmware on your router.
Connect the computer to the router with the Ethernet cable. Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router and upgrade the firmware on your router.
After upgrading the firmware on your router, reset the router and reconfigure it. Press and hold the reset button for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.

How to convert batch application to server app?

I have an application that performs some processing task in batch mode: data in, processing, data out. The application can be accessed through a well-documented API but is not thread-safe -- one cannot run the processing function in two threads concurrently.
In order to make that processing accessible to a program written in another language I would like to encapsulate it into some form of server.
I would like to find some minimum overhead solution where the other program sends the data to the server app in some way, waits for the processing to complete and reads back the result. One option would be to use the HTTP protocol with a POST request, another to write the data to a database row and send some command over a socket.
My main problem is: which solution is the easiest to implement and use and the one that allows to serialize the processing with the least effort. The solution should make it easy to prevent deadlocks or similar nuisances.
Are there some standard patterns for doing this or what would you Wizards recommend?

Thanks for the answers!
I must admit that I am still rather clueless in general about the issues involved here.
My immediate need is to send text files to the java application and get back processed text files. At the moment I have to do this from perl, but in the future, other languages (mostly scripting languages) might also need to do this.
So what I am trying to achieve is this: the client should be able to access the Java application/service as if it was some synchronous write/read operation (similar to a HTTP post request waiting for a response). There might be several clients working in that way but the the server should make sure that they get cleanly serialised: only one text file can be processed at any one time because the API is not thread safe.
I also cannot change the API itself -- just wrap into something that will do what I described. The more lightweight,easy to use, and easy to implement the solution the better.
For example, is there some kind of mini HTTP server and some serialization mechanism in Java that would make it possible to run the Java application disguised as a web service? Are there disadvantages to this and other solutions that are more suited?
I have looked at JMS and it does make a bit of a heavyweight impression to me. Also I'd prefer a solution where the clients use some mechanism that is more general, e.g. HTTP or the file system or maybe even a RDBS table (not sure what the possible traps with regards to deadlocks, timeouts etc. are there).

How to add a Web Preview Server to Eclipse Mars

I have been attempting to add a web preview server to my Eclipse Mars version. The only help I have found online is to open servers, right click, new, server then choose web preview from the IBM list.
I can not seem to find the IBM folder unless I install Liberty Profile, and even then there is no web preview server listed. Is there anywhere I can download the server to install it to my eclipse? I can't find anywhere online to do so.
Any help would be greatly appreciated. This is a fresh install of Eclipse Mars by the way.
Thanks,
Brian.

On 7/15/2015 8:27 AM, Brian Hamill wrote:
> I have been attempting to add a web preview server to my Eclipse Mars
> version. The only help I have found online is to open servers, right
> click, new, server then choose web preview from the IBM list.
>
> I can not seem to find the IBM folder unless I install Liberty Profile,
> and even then there is no web preview server listed. Is there anywhere I
> can download the server to install it to my eclipse? I can't find
> anywhere online to do so.
>
> Any help would be greatly appreciated. This is a fresh install of
> Eclipse Mars by the way.
>
> Thanks,
> Brian.
Just to confirm, am I correct in assuming the "HTTP Preview" and "J2EE
Preview" servers under the Basic category aren't what you are looking
for? I'm not aware of a "Web Preview" server.
Cheers,
Larry

How does one unistall OS X Server.App ???

I have a Apple Mac Pro "Quad Core" 3.2 (Server 2012), with Lion Server installed. I want to upgrade to Mountain Lion but want to unistall all server software, I just want the "normal" Mountain Lion installed. Any help highly appreciated.

Dragging the server app to the trash will appear to work - but when you go to empty the trash - you will see the following message below - and the trash will not empty. A subsequent attempt at emptying the trash will allow the trash to be emptied. Most of the components of the server are still in-fact installed - and will be reinstated when the server app is reinstalled.
When you do in-fact return the server app to the applications folder - opening it will result in having to go through the setup process again - under the assumption that some or all of your previous settings will be retained as well as any service related data. I can only assume that the original poster "tsblackard" is looking to completely remove the Server App and all of it's related services and data - and to the best of my knowledge the only way to do this is to restore the Mac from a backup prior to having set up the server. I suspect it can be removed manually - but not without a lot of hacking - that may or may not prove to be successful.
~Scott

How to add PSP (PL/SQL Server Page) application to an Oracle Apps 11i menu

How can I add a small application (drilldown search) I developed using psp (pl/sql server page) into a menu inside Oracle Apps 11i?

Hi
Here's how I do it:
1. Create the function.
In the Function Type use one of the PLSQL options, for example WWK which is a popup PL/SQL function.
In the web_html_call, simply add the package.procedure
2. Setup Security
In order to be able to call a PL/SQL procedure from a web page, you need to add it to web enabled PL/SQL
Do this in System Administrator, under "Security / Web Enabled PL/SQL " or similar (can't remember offhand)
3. Make the call
You should then be able to call it using
http://server:port/pls/DBSID/package.procedure
Obviously substiture DBSID for you database SID.
Should work, done it loads..
Chris

How to add disclaimer on smtp server and use it using utl_smtp.

We use utl_smtp to send emails. The requirement is to add a disclaimer on smtp server so that any outgoing emails sent using utl_smtp should have this disclaimer.
Is that possible and how do we acheive this?
--Thank you for any suggestions.

Hello Rahul,
the code would be something like this:
loop at itab1.
move-corresponding itab1 to itab2.
collect itab2.
endloop.
Hope this helps.
Regards,
Himanshu

How to add USB storage to Server.app

Similar Messages

Maybe you are looking for