How to block changes in purchase order after purchase release

Dear all
Can u please tell us how to block any changes in purchase order after purchase order is released...
(We don't want any line items addition or quantity addition or any changes once purchase order is released..)We wanted this for a particular purchase order type only
Regards
Sudha

Dear Sudha
Yes it is possible to confiquire your system insuch a way where once if the PO gets final relase then it cannot be changed.Only possiblity that will be available for the user to make chanegs in PO is possible when the final release is to be reset and then make the changes.
Release Indicator: specicfies whether the PO documents is blocked or can be processed for the follow functions.
You can define the release indicators you need for your release procedure:
The Released indicator is used to specify whether messages (PO documents in output format) may be transmitted for a purchase order with this indicator.
The Changeability indicator shows the effect of changes to the PO (a change to a PO may require a new release strategy to be determined, for instance).
By means of the Value change indicator, you can specify that the release strategy is to be re-started if a PO is changed and the value of a PO item thereby increases by a certain percentage (e.g. 10%). Set the Changeability indicator to "4 - Changeable, new release in case of new strategy or value change" or "6 - Changeable, new release in case of new strategy or value change/outputted" and enter a percentage in the Value change field.
And after that you can specify release statuese where you can specify which release indicator/status a PO is to have after having been released via a certain release code.
and after release simulation .
Test for the PO change after final release System will not allow you tomake changes by giving the message that the release indicator doesnot allow you make the changes in PO.
Regards
Sunny

Similar Messages

How to block post price conditions in purchase order after doing MIGO

I need to block post price conditions in the purchase order, after doing MIGO.
The problem is that somtimes buyers people go to the purachse order with ME22N, even if MIGO has already been made for this purachse order. They change The amount of certain price conditions in some or all the posts of the purchase. when people of accounting receive the invoice, there are problems of price differences.
i need help to do it
Thank you in advance for your help

The system will not allow to change the price once goods receipt takes place on that particular order. It happens only when we reverse the reciepts and make the po open. In such case the persons can change with ME22N. Its simple that only authorised user to have this transaction code and other users should not have this transaction code authorization.

How to block changes of PR after convert into PO

how to block change/deletion of purchase requisition after convert into purchase order without changing/deleting PO.

Hi
Goto customizatin of rellease procedure of p.req, in that select setup procedure with classification and select release indicator,and select details in that changeability indicator is there in that you will select based on your requirement
changeble,new release in case of release strategy
1-cannot be changed
2-changeble,no new determination of strategy
3-changeble,new release in case of release strategy
4-changeble,new release in case of release strategy or value change
select in the list and save and check your scenario.
Thanks

How to block changes in pr after po creation

We have set up the system messages (06 76 as error). However still it is possible that the user can change the description or add new line item after after the release/po creation. How to prevent this. how to block changes in pr after po creation
do i have to create new system messages if yes then hoe kindly suggest
Thanks.
regards

Dear Goel,
When setting the message 06076 and 06400 as described in the note 385002
to error it is no more possible to create a second purchase order with
reference to the purchase requisition.
See SAP note
315448     ME21N: Referencing a purchase requisition
Regards
V V

Block change on dates for Approved Purchase Request

Hi expert,
I'm new to SAP Business One.
I required to block change on dates for approved Purchase Request.
What will be the best solution and how-to achieve this objective?
Thank you.

Hi,
My company currently using SAP B1 version 9 PL05.
I have already applied approval procedure that it will always launch approval procedure for Purchase Request document (attached screenshots for setup approval procedure).
With above setup, Purchase Request document can only added after it has been approved (an [Approved] text has been shown on document view window and status is 'Open' as per attached below)
The dates have not disabled for editing although it has go through approval process.
The dates also not disabled for editing (Status is 'Closed' as per attached screenshot below) after it has been drawn to Purchase Order document.
Is anyone encounter this issue?
I know that SP_TN can prevent update but it is just a workaround method, not a best solution that I'm looking at.

Unable to update purchase order after partial delivery

bold Issue:
After upgrading from v2005 > v2007:
1) We created a PO with two different purchase items :
row 1: 10 pcs Item x
row 2: 15 pcs item Y
2) create a Goods Receipt PO based on the PO row 2 (15 pcs Item Y) so this row will be closed in the PO.
3) after saving the GRPO item Y is set as a non purchase item (deselected the tick box "Purchase Item" on the Item master), because the supplier will not be able to deliver this item again.
4) After changing item Y, we want to update the amount of Item X to for example 11 (instead of 10). This item is still a purchase item > while updating the PO the following error appears:
[Purchase Order - Rows - Item No.][line: 2] , 'The item is not a purchase item (2)' [Message 131-10]
In v2005 it was possible to follow the above procedure, however since the upgrade of v2007 the error appears.
The problem is that that it happens very often that the suppliers change the items, so they cannot be delivered anymore.
bold Below the response of SAP Support:
Line: -
Yes, I understand what you mean that the item you want to deliver is the other item PQ which is still a purchase item. However, the system does the checking based on document level, and not filtering only per Open rows. Hence, even if the item for B8 is fully closed, the system still detects that there is a non-purchase item in an open document (B8).
In order to update the other item PQ, please set the item B8 back to Purchase Item. Once the Sales Order is updated, you may update B8 again to Non Purchase.
If the possibility of using the 'Active/Inactive' button is not possible, another workaround is to use a User Define Field to flag the item. For example, you can set it as 'Y', when the supplier stopp ed selling the item. Then, in the Item Search window, you can filter the records to group those items that are set as 'Y' and the rest as 'N'. Only those 'N' items can be used when placing orders.
As an added procedure, you can generate an approval procedure that will be triggered when an item that is set as 'Y' in the User Defined field is added in the Purchase Order. When the approval is trig gered, the user can then re-verify the items added and make the necessary changes before saving the purchase document.
I hope the above workaround is suitable. I agree with the expected logic, but per Note937297, the stock status of an item is not meant to be changed after documents are added in the system. It seems a limitation in the current system.
Line: -
bold Solution:
The system should check if the open row can be delivered, since it still is a purchase item.
The provided workarounds are not an option for our customer, so we are looking forward to a positive reaction!
Kind regards,
Charlotte

Unable to update purchase order after partial delivery
Issue:
After upgrading from v2005 > v2007:
1) We created a PO with two different purchase items :
row 1: 10 pcs Item x
row 2: 15 pcs item Y
2) create a Goods Receipt PO based on the PO row 2 (15 pcs Item Y) so this row will be closed in the PO.
3) after saving the GRPO item Y is set as a non purchase item (deselected the tick box "Purchase Item" on the Item master), because the supplier will not be able to deliver this item again.
4) After changing item Y, we want to update the amount of Item X to for example 11 (instead of 10). This item is still a purchase item > while updating the PO the following error appears:
[Purchase Order - Rows - Item No.][line: 2] , 'The item is not a purchase item (2)' [Message 131-10]
In v2005 it was possible to follow the above procedure, however since the upgrade of v2007 the error appears.
The problem is that that it happens very often that the suppliers change the items, so they cannot be delivered anymore.
Below the response of SAP Support:
Yes, I understand what you mean that the item you want to deliver is the other item PQ which is still a purchase item. However, the system does the checking based on document level, and not filtering only per Open rows. Hence, even if the item for B8 is fully closed, the system still detects that there is a non-purchase item in an open document (B8).
In order to update the other item PQ, please set the item B8 back to Purchase Item. Once the Sales Order is updated, you may update B8 again to Non Purchase.
If the possibility of using the 'Active/Inactive' button is not possible, another workaround is to use a User Define Field to flag the item. For example, you can set it as 'Y', when the supplier stopp ed selling the item. Then, in the Item Search window, you can filter the records to group those items that are set as 'Y' and the rest as 'N'. Only those 'N' items can be used when placing orders.
As an added procedure, you can generate an approval procedure that will be triggered when an item that is set as 'Y' in the User Defined field is added in the Purchase Order. When the approval is trig gered, the user can then re-verify the items added and make the necessary changes before saving the purchase document.
I hope the above workaround is suitable. I agree with the expected logic, but per Note937297, the stock status of an item is not meant to be changed after documents are added in the system. It seems a limitation in the current system.
Solution:
The system should check if the open row can be delivered, since it still is a purchase item.
The provided workarounds are not an option for our customer, so we are looking forward to a positive reaction!
Kind regards,
Charlotte

Any event which is raised when we save Purchase order after creating a new?

Hi
I need to know any event which is raised whenever we save a purchase order after creating a new one. I know event 'change' of object type BUS2012 is raised whenever we change a PO. Please help in this regard.
Regards
Swetabh

Create event doesnt exist in BUS2012.check if custom business object exists for this by using 'where used list',probably it may have created event.

How do I change the chapter order in itunes 11.0.4?

How do I change the chapter order in itunes 11.0.4? The book chapters used to look like the playlists in music. You could ;change how it was sorted by the name time, artist etc. Now there isn't a catagory label and the background is the same color as the background of the book photo.

Trent o
Someone else in the forum told me how to do this. If you have Onyx on your system then select Parameters, iTunes and turn off high contrast mode. If you don't have Onyx, I'd suggest getting it. It is freeware and used to help maintain your system. Good luck
Paul

How do I change the sort order in the file picker?

Hi there,
I've recently hit a problem with the Save and Open dialogs in Mavericks. Some how I have changed the sort order within the Column View so that it sorts by modified date and no longer by name. Unfortunately I can't work out how that happened or how to get it back so that it sorts by Name.
Please could anyone help?

Normally, you click on this thing (shown below) and select the sorting preference.

How do I change the display order in the VPN menu in the status bar?

Hello,
How do I change the display order in the VPN menu in the status bar?
(in the drop-down menu from this icon) ->
Thanks.

Hello. Perhaps this is because you are trying to arrange the order of many VPN services, since only one VPN service can be selected at once in System Preferences. In my original post, I did not mean that; I meant that I wanted to arrange the order of VPN configurations within a VPN service. In this screenshot, I have one VPN service only:
And in the following one, it is shown that there are more than one VPN configurations within that VPN service:
Furthermore, it was the order of VPN configurations that I wanted to change, not the order of VPN services. If you are trying to change the order of VPN services, I do not have a solution.

How can I convert of Sales order to Purchase order automatically?

How can I convert of Sales order to Purchase order automatically?
It is a TPSO (Third party sales order) situation, I am using item category as TAS, it automatically converts Sales order to (PR)Purchase Requisition.
But can I convert Sales order to (PO)Purchase order? without any manual intervention?

Hello,
you can't create a sales order with reference to a purchase order. You can input customer PO nuber in the sales order Purchase Order number filed.
Prase.

How can I change the preference order of stored wi-fi networks?

How can I change the preference order of stored wi-fi networks? (My iPhone keeps trying to connect to a weaker network that I occasionally use - even when there's a stronger network stored in the system which I want to rank higher)

If you know and have entered and connected successfully to the weaker network whenever you come near it it will automatically connect to it.
If you want it to connect it to the stronger network you should go to the wireless settings and connect to the stronger one when both the networksare in range.this will make your stronger network as the default network connection.

Purchase order from Purchase requisition

Hi all,
How can we create purchase order from Purchase requisition number?
Any BAPI or Function Module for changing purchase requisition to purchase order .........
Thanks in advance for all your help.
Regards,
Anukool

Hi,
Have you had a look through transaction BAPI to see if there is anything suitable?
I've just had a quick look and found BAPI_REQUISITION_RELEASE_GEN which should release the PR and then maybe you could use BAPI_PO_CREATE1 and see if there is a way to reference the PR?
Or what about looking at the transaction ME59N to see how that works?
I'm just guessing here sorry.

Purchase Order and Purchase Request

Hi Gurus,
do you know how can I get a Purchase Request Number for an item in Purchase Order?
I cannot find it in any BI Content Data Source...
Regards,
Dorota

In R/3 tr: /nme23n- display purchase order
It will show the last Purchase Order that you displayed.
On the Purchase order on the top left corner, click on purchase order, and click "other purchase order".
the pop up asks you to enter either purchase order or purchase order number
enter the purchase request number for which you want to see the purchase order and hit ok and vice versa..
go to status tab and double click on purchase order
you will get the corrsponding purchase order for the purchase request..
and if you chose purchase order on the pop up you can get the purchase request number
For the data source:
2lis_02_itm, 2lis_02_scl
http://help.sap.com/saphelp_sm32/helpdata/en/8d/bc383fe58d5900e10000000a114084/content.htm
Both of them together can address your requirement.

Purchase order Revision and Releases

Hello All
Can any one tell me the keyfig for Purchase order Revisions and Releases.I am trying to built a report that has PO Revision count and PO Releases count.
Any help would be appreciated
Thanks

Hi,
PO release is a approval procedure. If a PO fulfills certain conditions (e.g. the total order value exceeds $10,000), it has to be approved (by the cost center manager, for instance) before it can be processed further. This process of approving is knows as release procedure.
PO revision refers to changes made to PO. If an existing PO is changed, the system can print an amended PO displaying the changes. The first change is printed as 'amendment no. 1", the second as 'amendment no. 2" and so on.
Hope this helps.

How to block changes in purchase order after purchase release

Similar Messages

Maybe you are looking for