How to block the material qty to 1 while creating sales order (VA01)?

Hi All,
Scenario : We have 20 Materials each with 100 qty in Plant. In the sales order we should have all the 20 materials with qty one. The sales order should throw an error if the material qty is more than 1 and should not allow to create a sales order.
so is there any transaction code where we can block the entire material qty to 1 from the same plant while creating sales order?
Note: We should not set in MM01 "Minimum order qty". Assume we have 100 material in plant we can't set for each material one by one "minimum order qty".Instead of that is there any option to set the whole material qty to 1 as minimum while creating sales order?
Kindly guide me how to proceed.
Thanks,
Renjith

If you have access to idoc before calling the processing Function module, Adding header text segments E1EDKT1 and E1EDKT2 to the idoc will create the header text.
Regards
Sridhar

Similar Messages

How to make ship to address fields mandatroy while creating sales order

Dear forum Members,
My client oraganizes trade shows and hence ship to address vries everytime when sales order is entered for the same sold to party.So one times ship to customer is used in the sales order and address is entered at sales order level. Please note that at master data level all address fields are suppressed for one time customer.Hence there is no question of going back to one time customer account group and making any field mandatory.
While changing address for ship to at order level, there are few fields which are mandatory, for example city is mandatory. I also want to make zip code and region as mandatory.where is this controlled?Please note that this is not account which controls this. i have already done lot of r&d on account group and transaction variants which are not controlling these fields at sales order level.

Hi Kanwal,
Only incompletion procedure will not suffice for your requirement.
You need to make the field mandatory wherein, if you dont enter, system will not allow you for enterin further fields. For this you should do the following:
Goto transaction SHD0, you will get a screen where you need to enter you Tcode "VA01"
Below you define a transaction variant (starting with Z).
On the next tab you have Screen Variant. Here you enter screen variant name, program name & screen number.
Then you click on create.
Its like as if you are doing some kind of recording. Finally you will reach to the screen where there are options available to make the field mandatory.
For your reference the program is SAPMV45A screen number is 4001.
Further screen are self explinatory.
Hope this should solve your requirement
Regards,
Dhananjay

How to change the status of material while creating sales order via BDC

Hai.
In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not getting created because of material status is new . I want to create sales order (va01) even material status is new.
pls give me out the solution. Points will be rewarded.
thanks & regards,
sami.

Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore

How to Block the material

Hi friends,
How to block the material ,
what are the implecations if we block a material?
Regards
Krishna

Hi,
The best way is to keep the materail status with deleted or blocked for puchase / sales and need to maintain in the materail master.
You cannot delete the material from material master until archiving but you can block that material for any procurement
Goto Basic data 1
X-plant matl status -
01 Blocked for procment/whse
02 Blocked for task list/BOM
10 Blocked for MRP
Select any one.
Valid from -
Here you enter valid date from which the material should be blocked.
So from this your material will be blocked for any PR/PO/any transactions related to Procurement
BR,
Krishna

How to club the downpayment and periodic billing scenario in Sales Order

Hi experts,
Could you please let me know how to club the downpayment and periodic billing scenario in Sales Order.
Requirement is : If you have 10 lacs total amount and out of that 50% should be the downpayment and rest of the amount should be distributed among three equated instalments for 2 months each (periodic billing). This should work with one line item in sales order. Pls provide relevant inputs how to work out this scenario.
Your help would be appreciable.
regards....Diwakaran

Hi Yang,
Workflow is the best approach for any issue related to business objects.
Since you want call FM BAPI_SALESORDER_CHANGE, it will change SO. It means everytime any SO is changed there will an event being triggered.
object type: BUS2032
event: Changed
simple solution:
1. Please create object type (SWO1) and its super type should be BUS2032.
2. Add your own method and attach your custom FM which actually updates the qty & PR)
3. Create Task (PFTC_INS)
in basic data:
- provide object type which you have created
- provide method which you have added
goto triggering events tab
- Choose Object Category as BOR object type
- provide object type (better give BUS2032)
- provide event as CHANGED
Please have look into very nice video blog which helps you to create your workflow.
blog: [Creating your first SAP Business Workflow]
Regards,
Sukhbold Altanbat.

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

How to restrict the order reason in Tcode Va01 while creating sales order

Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.

Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM

How to manual maintain TAX condition value while creating sales order

Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank you

Hi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help.

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

While creating sales order stock should not go under reserved block,

While creating sales order stock should not go under reserved block,
What is the customization?
Please help me.

Hi,
What exactly is your requirement?
Can you be a bit more detailed?
Thanks

While creating sales order I am getting Sanctioned party list blocked but I am able to create delivery, and PGI

Dear GTS Experts,
While creating sales order I am getting Sanctioned party list blocked, but I am able to create delivery, and PGI.
Where Is the wrong ?
Thanks a lot
Venu gopal

Dear Venu
Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
Please let me know if any further inputs required.

How to Block the material Item from the Po level?

Hi,
Is it possible to block the item stock from the PO level?
Currently client request to block the material on certain good receipt only, that's why they want to control in the PO.
With the field stock type in PO defaulted to Unrestricted is good for them as they only need to change the stock type to block if they found out that that particular item need to be blocked.
The problem that i'm facing now is the stock type in PO is for display only, but when i check in OMF4, Quality Inspection, it was set as opt. Entry. Is there other places that i still need to change?
Beside change the stock type in PO, is there any other work around? For example, such as can we set a message pop up from the item text in the PO indicate that this item should be recieve as block stock when the store personnel do the GR or other work around?
Thanks!

hi
as per ur requriments certain goods receipts only go for block stock.
for that in that purchase orders w r t line items take stock type as a block stock.
if u want to restrict the material no purchasing at different u can select Xplant material status in material purchasing view or material type level oms2.
regards
sap mm

How to grow the report of customer's openitem with sales order

How to grow the report of customer's open item with sales order?
Now we can get the customer's open item with invoice No easily,but our end user need the the customer's open item also with sales order .And because a invoice to multi sales orders. I can do nothing.
Now I have a idea that a develivey No with one sales order , and one invoice with a sales order's develivery ,then one inovice to one sales order . I want to know if other company have use this idea. Or have other solution for my problem.

Hi Yuzhou Yang ,
Yes you are right. In FI transaction you can get the sales invoice wise , reference field of the header data.
As you are aware that while creating a sales order , no FI entry is generated.
In my opinion you can get the required report through customization.
Thanks
D.K.Lakshmi narayana

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Not using substitute material while creating sales order with function?

hi experts.
I use SD_SALESDOCUMENT_CREATE function to create a sales order.
Material A has a substitute material B with substitute reason 0005.
So if I use material A when creating sales order with SD_SALESDOCUMENT_CREATE, the order is created with material B.
I don't want to substitute the material automatically. I want to create the sales order with material A.
What should I do? Help me please.
Edited by: Ji Yeob Kim on Nov 19, 2009 11:34 AM

Hi Kim,
I also have same requirement. Please suggest how you resolved this?
Thanks
bvrnreddy

How to block the material qty to 1 while creating sales order (VA01)?

Similar Messages

Maybe you are looking for