How to change the caption in data entry selection screen??

using cats0009 i populated the data into wbs desc and a/a desc but
but i am not able to change the name(caption of additioanl field) as 'wbs description'. and A/A desciption.
can anyone please help me out how to do this...

You don't mean selection text do you? Can you be more specific?

Similar Messages

Report Painter: How to change the order of lines in selection screen

Dear Gurus on Report Painter,
how can I change the order of the lines (where the values for the variable selection of my cost center report are entered) in the selection screen of a report painter report? The Selection screen looks awful.
Is there also a possibility to add another description to each line of the selection screen?
Thank you very much for your advice.
Best regards Timo

I am afraid you have much choice in choosing the order of the selection parameters. However, with the developer's access you may.
This is how!
Step 1: If it is a standard report, copy to your own report. and assign it to a report group. and execute.
Step 2: When you execute, and the selection appears, go to systems>status and here , copy the program name (it may look something like GP46LP6VEDORBSA2IHWYSR4TL58020)
Step3: Go to SE38 and enter the above derived program name with a view to re-arrange the line withing the program, with reference to selection parameters.
For example: I have a selection screen in the following order:
Controlling area
Fiscal Year
From period
To period
Plan version
Cost center group
Or value(s)
Cost element group
Or value(s)
The corresponding program that drives this order is in the program and would look like this,
SELECTION-SCREEN BEGIN OF BLOCK VALUE_SELECTION
 WITH FRAME TITLE TEXT-003.
 PARAMETERS: $1KOKRE LIKE CCR1S-KOKRS .
PARAMETERS: %1KOKRE LIKE CCR1S-KOKRS MODIF ID IN4.
 for controlling area
PARAMETERS: $1GJAHR LIKE COSP-GJAHR .
PARAMETERS: %1GJAHR LIKE COSP-GJAHR MODIF ID IN4.
 for fiscal year
PARAMETERS: $1PERIV LIKE COSP-PERBL .
PARAMETERS: %1PERIV LIKE COSP-PERBL MODIF ID IN4.
 for period from
PARAMETERS: $1PERIB LIKE COSP-PERBL .
PARAMETERS: %1PERIB LIKE COSP-PERBL MODIF ID IN4.
 for period to
etc.
PARAMETERS: $1VERP LIKE COSP-VERSN .
PARAMETERS: %1VERP LIKE COSP-VERSN MODIF ID IN4.
PARAMETERS: $1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4 .
PARAMETERS: %1VALUTP LIKE CCR1S-VALUTYP MODIF ID IN4.
SELECTION-SCREEN END OF BLOCK VALUE_SELECTION.
......... set variables ..............................................
SELECTION-SCREEN BEGIN OF BLOCK SET_SELECTION
 WITH FRAME TITLE TEXT-004.
PARAMETERS: $1KOSET LIKE RKSB1-KSGRU.
PARAMETERS: %1KOSET LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KOSET FOR CCR1S-KOSTL .
PARAMETERS: $1KSTAR LIKE RKSB1-KAGRU.
PARAMETERS: %1KSTAR LIKE RGSBS-SETNR MODIF ID IN5.
SELECT-OPTIONS _1KSTAR FOR CCR1Z-KSTAR .
SELECTION-SCREEN END OF BLOCK SET_SELECTION.
If you want fiscal year to appear first, you try just copying the coding relating to fiscal year just above the coding for Controlling area.
Extend the same logic for what you may want to get.

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

How to change the schedule line date in SO with reference to value contract

Hi SD Guru's,
I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
I can not add to user exit MV45AFZZ , because order that was created with reference to the value contract, does not go through this user exit.
Do you have some ideas where i can add it?
Thanks and Regards
Viky
Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

Hello Viky
How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
Does the program go through these exits when an order is created with ref to a value contract??
Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

How to change the "content created" date/time in FCPX?

Since I've had problems importing my whole iMovie event library into FCPX I decided to run some tests with importing individual files (part of iMovie events and originally imported from camera into iMovie). Some of them for some reason got the wrong "content created" date/time in them while in iMovie they have the right date/time set. Does anybody have an idea on how to change the "content created" timestamp?

I had a bunch of DV files that imported stamped with the file modification date and time. I did not find a way to change it in FCPX. With FCPX not running, I used A Better Finder Attributes to modify the creation and modification dates of the files in the event folder. FCPX reconnected to them but the event still showed the old range of dates so I created a new event and moved the clips to it. Maybe ther is a beter way but that is how I did it.

How to change the IDOC segment data

How to change the segment data for all IDOCs at one shot J.
For exmple E1EDK02-QUALF - 004
                   E1EDK02-RGID - 100000008 (Inquiry No)
               to
       E1EDK02-QUALF - 004
                   E1EDK02-RGID - 200000005 (Quotation)
Any hints, tips.Appreciate your help and more rewards.
Regards,
Cris

Hi,
You can change the IDOC values using the transaction WE09
Give the IDOC number..
Press F8..
Expand the tree..
Double click on the segment..
Then in the menu..DATA RECORD -> DISPLAY/CHANGE..
It will go in change mode..Change the IDOC value..
Thanks,
Naren

How to change the valid from date of the bom header?

ECM is active in the system.
I want to change the valid from date of the BOM header with the help of a change number.
How can I change it?

Hello
Lets assume that, we are going to change Management for controlling Valid From date
Steps to be followed for creation of Change No
Tcode CC01 for Change No
Click on Change Master
Once you enter into Change master, maintain the description
In the Valid from Date, maintain the date from which you BOM should be current
Maintain the Status (01)
Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
save the Change No
After the change no is created
Enter the Change No during the creation mode of BOM
THe system copies the Valid from date from Change No

How to change the default "no data found"

Hi,
Is there a way to change the default "no data found" message of the "When No Data Found Message" in the Report Attributes?
I would like to change that message for a French message. I know that I can change it manually in every section, but I would like another default messages appearing when i create a Report Section.
Thanks

Can you point me to a tutorial?Sure, Users Guide > Managing...Globalization (Chapter 15?)
Is this not happening at run-time?Yes. What happens at runtime is the selection of the application to run. If you run a page in the Application Builder (app 4000) and that application had not been translated or your browser language were set to some flavor (flavour) of English, you get 4000. If app 4000 had been translated to French, say, and you request a page in 4000 and have your browser language set to French, then you'll really run the requested page from app 4002 which is a copy of 4000 translated to French long before your request came along.
If you look at our distribution, you'll find 9 (or more) versions of each of the internal applications in the builder directory.
Scott

How to change the caption of a field with a button?

I have serious trouble, don't know why, in order to change the caption of a field.
I can't do it with a button as in any other way...dropdown list, ecc...
Assumes that we have a button and "on click" i want to change the caption of a numeric or text field.
form1.ppp.Button1::click - (FormCalc, client)
NumericField1.caption.value.text.value = "whatever you want to set it to";
TextField1.caption.value.text.value = "whatever you want to set it to";
xfa.form.form1.ppp.NumericField1.rawValue = xfa.form.form1.ppp.NumericField1.rawValue + 1;
The numerical value inside the numericalfield1 is increased each click...but the caption still the same.
Why this happen?
I check many threads on this forum and on google and i still find these samples...
please help.
Thank you

Yes, it is. Also in preview i checked "dynamic XML". is it right?
i try to download this sample while searching in the forum to solve my problem
https://acrobat.com/#d=pxtis4z3OxCqWxajZwDS2Q
i try to add to that form my code and it's work!! i can't undersand why...
Below you can find my PDF...i can't understand why here the same code doesn't work
http://www.hsc350.it/download/Untitled2.pdf
Thank you again!

How to change the Time Zone of a selected user programically ?

Hi all,
I have a specific requirement to develope using Webdynpro. I want to programically change the Time ZOne of a selected user. Could some one help me . I promise to award points for the solution.
Thank you in advance
Regards
Maruti

Hi,
Kindly have a look at the following threads,
Re: Timezone of current User
Re: Changing the Time Zone attribute
Regards,
Saravanan K

How to change the requested delivery date when approval has been done

Hi
We use SRM5.0 and we want to implement SC, now we want to make it possible to change the delivery date in the shopping cart when we approve.
This is needed if we request today but the approver didn't approve same day, therefore the requested day has to move the same number of days, that the approver has spend. Or else the deliver date will not be correct.
Do any of you know how to do this??
Best regards
Jakob

Hi Jakob,
What scenario do you use? Classic, Extended Classic, Standalone?
So depending on your scenario you can have differente types of follow-on documents (PR/PO only in ERP in case of Classic, or PO in SRMand ERP in case of Extended Classic).
Do you use Sourcing Cockpit?
I've tested this scenario in SRM 7.0 Standalone and if the follow-on document (in my case, a PO) is not "Ordered" yet then I can change the SC. But if it is already "Ordered", I can't change the SC. This is standard behavior.
You could use Sourcing Cocking to solve this issue, in this you don't use it yet.
Best regards,
Christian Zeuch

How to change the value of data supplier host parameter in PI7.1

Hi Frnds,
I want to change the data supplier host parameter to Hostname,when i checked in SLD Administration its pointing to local host,so i wnat to change it.
What is the procedure to change the value to host?? i am working on PI7.1 EHP1.
THANKS,
Raj

thanks

How to change the color of Data Markers in Bar chart

Hi All,
In OBIEE 11G, I have Bar chart with 4 measures, each measure is set to a color using Style properties of Graph. Now i want to change the color of the Data markers matching to the Bar color. Which means Bar and Data marker value should be set to same color.
Please guide me on this.
Thanks,
GJ

Here's a picture that may help in following Ian's instructions:
I clicked on a green column to select the series as shown.
Then this:
Turns into this and you can click Style:
SG

How to changed the Cost Center Date

Hi All,
I have an issue. Cost center is created which have a valid date from 10.01.2009.
Upon checking my set up in the SAP my default date format it is DD.MM.YYYY.
It have mistakenly inputted a different date instead of October 1, 2009 it inputted January 10, 2009.
To resolved: When i went to KS02. I could not edit the valid dates just the master information. And also in KS12.
Is there a way i could change the valid dates of the cost center?

Hi,
But did you succeed to delete it via KS04 or not? If there are postings in this period, then obviously, it won't be possible to delete it and the validity period could not be shortened retroactively anymore.
Regards,
Eli
P.S. OKEON won't help you...

How to Update the Final Process Date in Termiantion Screen Oracle HRMS

Hi Gurus,
I have a requirement where i need to update the Final Process Date. is there any standard api to update the final process date. i know there is a update to update the termination details like actual termination date,last standard process but how about final process date.
Eg : For one assignment the final process date is 31-March-2013 and as of now he is a exemployee in system as he was terminated on 31-DEC-2012. now i want to prepone the final process date to 31-JAN-2012.
any replies on this is highly appreciable.
Thanks in advance.

I would reverse the termination then terminate the employee with the right FPD.
hr_ex_employee_api.reverse_terminate_employee
hr_ex_employee_api.actual_termination_emp
hr_ex_employee_api.final_process_emp
Maybe also the below might work:
hr_periods_of_service_api.update_pds_details
Please note that there should be no payroll result in your case after January payroll.
On a side note, you can also termiante employee without setting the FPD, and then put it only when approved by the business - in this way wou can avoid the prepone.

How to change the caption in data entry selection screen??

Similar Messages

Maybe you are looking for