How to combine indicators in different cases?

I had a case structure, with different functional array indicators having the same size (21X21) in each case.
Is there any way to combine these array indicators into just 1?
Thanks!
BR

In the "line case," I didnt expect any chane in those 5 loop That loop was for the following 2 cases.
The main difficulty I encountered was that the I didnt know how to show the marquee with different times of loop.
As you might see, the line case was supposed to be 21 stages, while the rectangle and circle were only 5.
Thx ur help again

Similar Messages

How to combine data from different input forms outside a nested iView

Hi,
i try to combine data from different input forms in a single one.
Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
Is there any solution?
Thanx
Mathias

Hi Scott,
i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
greets
mathias

How to combine rows from different unrelated tables?

I need to create a report where the data are coming from 2 unrelated tables. My calculation needs data from both tables. Is this possible within Crystal Reports without having to write complicated SQL commands? If not, can someone provide an example of such a query?
thanks in advance
-Mark

Morning Mark,
Yes Amr is right however there has to be some sort of link between the two tables to create a join. For example a Order no from one table matches with other Order no.
There could be another possibility and that is if you have a third table which has two fields common to those two tables then when you bring the third table it will act as a middle man.
If you need to bring the information onto the report according to some sort of criteria then those two tables need to be linked togeather at some point otherwise it won't work.
For example
I have two tables, FOC and Customer, both have nothing in common however the third table Orders has fields which is common to FOC and Customer. So I linked the two tables via Orders table. Now when I open my report my results are based on the Customer and FOC number.
Hope this helps
Regards
Jehanzeb

How to combine count() queries to tables in different environments?

Hi all,
I've got two tables that have the same schema, but slightly different data. One is a test db, and the other is a model office db (i.e. neither is a production db).
I run these two queries, individually, from within the test db:
select count(cdeSource), cdeSource
from schema1.SomeTable
group by cdeSource
order by cdeSource
select count(cdeSource), cdeSource
from schema1.SomeTable@TheModelOfficeDB
group by cdeSource
order by cdeSource
The column cdeSource can contain a 1 to 1 relationship with another field in the tables, but it can also contain a 1 to many with the other field.
Right now, I need to export each result into a file and then do a compare between the two to find the differences, between the two tables, out of the big results.
Question: How can I combine those two queires into 1, and show only the differences from the "count(cdeSource)" results column?
Thanks.
Edited by: we5inelgr on Jan 29, 2013 5:29 PM

we5inelgr wrote:
Example snippet of results:
Test environment
Count(cdeSource) | cdeSource
2 | "00.01" <---Same as other environment, would like to exclude
6 | "00.09" <---Same as other environment, would like to exclude
16 | "00.50" <---Different count, for same cdeSource. need to include
2 | "00.95" <---cdeSource only found in Test. need to include
2 | "72.1" <---Different count, for same cdeSource. need to include
Model Office environment
Count(cdeSource) | cdeSource
2 | "00.01"
6 | "00.09"
10 | "00.50"
3 | "72.1"
6 | "98.1" <---cdeSource only found in Model Office. need to include
I tried putting "MINUS" in between both queries, and it gives me an error: ORA-00933: SQL command not properly ended.
I tried wrapping that whole query, within a select * from () but gave me a different error: ORA-00907: missing right parenthesis
Other ideas how to combine the two?
Thanks.if & when you use valid syntax, then no errors get thrown.
We can not tell you what you do wrong, since you don't use COPY & PASTE to show us what exactly you do.
SELECT cdeSource, COUNT(cdeSource) FROM TABLE1
MINUS
SELECT cdeSource, COUNT(cdeSource) FROM TABLE1@remote_db;

Hi, I have converted different smartforms to pdf format.How to combine pdf?

Hi All,
I have converted different smartforms to pdf format. How to combine all the pdf's into single pdf.
I need all the smartforms to be in single pdf.
Please help me in this regard.
Thanks in advance.

Hi Keshu,
Individual pdf should be sent to individual user.
And at last all the pdfs of the smartform should be combined into one.
And admin have the provision to download it .
I mean the requirement is
For example.
For the month of september i will generate Pay Slip to each employee. And each pdf will be send to corresponding employee.
And finally all the pay slips of all the employees will be combined into single PDF and admin will download it and keep it for reference.
So as of now. I have generated individual pdfs and mailed it accordingly.
But how to combine it into one PDF is my question.
Please help me in this regard.
Thanks in advance.

How to adjust Repetitive Area Lines & Height in different cases

Hi,
Repetitive Area Lines Should display till Footer Level.How we can fix up the repetitive Area Height
Different Cases
1. In one Document has One Item in that case Lines should display till Footer
2.Another Document have morethan five Items In that case also Lines should come till Footer Level
Suggest me how can i solve this.
Regards,
Vikram
Message was edited by:
Marc Riar

Hi Challa
You could try and put your totals in the 'End of Report' area. Tick the 'Align to Bottom' on the format tab. If your totals are in the Repetitive Area (Footer) they will always display directly after the last record.
I hope I understood your problem correctly.
Regards
Daan

How to compare content in different versions of case?

Need to compare attributes of tables, columns, sequences etc between case115 and case121. Think I should be able to use views like ci_table_definitions to do that so tried setting up an account that dblinks to the different case dbs. Problem seems to be that I get duplicate rows retrieved from those views. If I sqlplus directly into case115
and run exec jr_context.set_workarea('GLOBAL SHARED WORKAREA') it seems to setup session so the view gives single row. So is there some sql to add to a query running from my dev account that would achieve the same filter? Alternativly is the source for jr_context available so I can build that in dev account? Any better ideas?
Thanks , Aidan

Thanks John, I'll look into that approach. This repository is shared by 100s of developers across multiple products so I'm not sure what licence I have to do much in the repository itself. Also although case115 is older version its still being updated - the requirement is not exactly to sync 4 different codelines as new features are added in later codelines but need to do comparisons to verify all essential updates have been made in different levels of schema.
Still be interested if anyone has a method of implementing the filter to avoid duplicate rows retrieved from these views. Currently just using a very basic rownum filter to avoid cartesian:
select ' '
,decode(case115.AUTO_GENERATED,case121.AUTO_GENERATED, null, 'CI_COLUMNS|'||case115_td.name||' | '||case115.name||' | AUTO_GENERATED | case115 | '||case115.AUTO_GENERATED||' | <> case121 | '||case121.AUTO_GENERATED)
,decode(case115.AVERAGE_LENGTH,case121.AVERAGE_LENGTH, null, 'CI_COLUMNS|'||case115_td.name||' | '||case115.name||' | AVERAGE_LENGTH | case115 | '||case115.AVERAGE_LENGTH||' | <> case121 | '||case121.AVERAGE_LENGTH)
.... generated select for all columns in a ci view
from
( select CC.rowid col_rowid, CC.NAME col_name, CC.ivid col_ivid,
CTD.ID ID, CTD.IVID IVID, CTD.NAME NAME, CTD.ALIAS ALIAS,
CTD.USER_DEFINED_PROPERTY_18 USER_DEFINED_PROPERTY_18
from CASE115_TABLE_DEFINITIONS CTD, CASE115_COLUMNS CC
where CTD.name like upper('&table%')
and cc.TABLE_REFERENCE = CTD.id
and cc.rowid = ( select cc_2.rowid from CASE115_COLUMNS cc_2
where cc_2.ID = cc.ID
and rownum = 1)
and CTD.rowid = ( select case115_TD_2.rowid from CASE115_TABLE_DEFINITIONS case115_TD_2
where case115_TD_2.ID = CTD.ID and ROWNUM = 1)) CASE115_TD,
( select CC.rowid col_rowid, CC.NAME col_name, CC.ivid col_ivid,
CTD.ID ID, CTD.IVID IVID, CTD.NAME NAME, CTD.ALIAS ALIAS,
CTD.USER_DEFINED_PROPERTY_18 USER_DEFINED_PROPERTY_18
from CASE121_TABLE_DEFINITIONS CTD, CASE121_COLUMNS CC
where CTD.name like upper('&table%')
and cc.TABLE_REFERENCE = CTD.id
and cc.rowid = ( select cc_2.rowid from CASE121_COLUMNS cc_2
where cc_2.ID = cc.ID
and rownum = 1)
and CTD.rowid = ( select case121_TD_2.rowid from CASE121_TABLE_DEFINITIONS case121_TD_2
where case121_TD_2.ID = CTD.ID and ROWNUM = 1)) CASE121_TD,
CASE115_COLUMNS case115, CASE121_COLUMNS case121
where CASE115.rowid = CASE115_TD.col_rowid
and CASE121.rowid = CASE121_TD.col_rowid
and case115_TD.name = case121_TD.name(+)
and case115_TD.col_name = case121_TD.col_name(+)
ORDER BY CASE115_TD.name, CASE115.order_sequence, CASE115_TD.col_name
So this works from a dev db that dblinks to 4 case repository dbs. Sql generates lots of blank lines that are stripped out. Its pretty slow! So be useful to replace the rownum filter with equivelent of jr_context.set_workarea('GLOBAL SHARED WORKAREA')
Regards, Aidan

Bad bug with ID3 tags of different case for same artist

My itunes files and music library are on a different drive than my boot drive. It is an internal drive (always on) in my Mac Pro at /Volumes/Media1/iTunes with music library at /Volumes/Media1/iTunes/iTunes Music. iTunes is setup to automatically keep it organized and copy files to the media folder when adding. It has been this way for years, never a problem.
Just recently, and I think this may have coincided (but I'm not sure) with a 10.6.5 Snow Leopard update, my music started disappearing! The entries were still in the library, but with the missing exclamation mark in itunes with it reporting that it couldn't find the files. But only certain artists. After searching my computer, I found the missing files it at the same path, but on my boot drive, at /Media1/iTunes/iTunes Music/<missing artist>!
Trying to add these files back to my library would work briefly, but then they would magically disappear out of /Volumes/Media1/iTunes/iTunes Music and go back to /Media1/iTunes/iTunes Music/
I figured out the one thing the different artists that had this behavior had in common - some of the ID3 tags for the same artist, which are the basis for organization, were in different cases. I think there is a weird case sensitivity bug that is breaking things. When I add back only those songs for an artist with ID3 tags for the artist of the same case, the behaviour stops.
I'm posting less looking for an answer and more to raise visibility and hope this gets a fix.
Example entries from my iTunes Library.xml, notice how the 'k' in OutKast is a different case in the entries.
<key>Artist</key><string>OutKast</string>
<key>Location</key><string>file://localhost/Volumes/Media1/iTunes/iTunes%20Music/OutKast/Speakerboxxx,%20Th e%20Love%20Below%20(Disc%202)/13%20Pink%20&%20Blue.mp3</string>
<key>Artist</key><string>Outkast</string>
<key>Location</key><string>file://localhost/Volumes/Media1/iTunes/iTunes%20Music/Outkast/Aquemini/12%20Spot tieOttieDopaliscious.mp3</string>

I'd like to note that I'm experiencing the exact same issue. I'd add to this but petegas4life has it spot on. I'm just replying in hopes this thread gets noticed so the engineers at apple can look into this and hopefully fix it in the next release.
Reproducing the problem is pretty simple too. Just take one song from an album and change the case of the artist name. You'll see the music move to the boot drive and all of the songs from that artist won't work in itunes anymore. And if you're relying on iTunes to edit the tags, fixing the files is a PAIN because they keep disappearing on you.

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

Does anyone know how to combine two apple ID's together?

I have found out that I have two Apple ID's! One is for my apps on my iphone and the other is for iTunes. Somehow they are set to different email addresses but are being sent to the same email address. Does anyone know how to combine them, so I use just one Apple ID?

This is my solution too.
You see, what I also downloaded all the free apps I have on iPhone to this account I choose to use, so this way I didn't need to change accounts (of course it was on the iOS 5 times)

Can you please help me by saying me how can i join two different picture to make it as one picture.??

Hi Sir/ Madam,
My name is Rishav and I am facing some problem with my Photoshop CC. Actually I have a question. If you guys could help me out i will be very obliged. The quest in "Can you please help me by saying me how can i join two different picture to make it as one picture.??"

Maybe you should post over at
Photoshop for Beginners
or start with the "Get Started" section of the Help:
Photoshop Help | Photoshop Help
And your question
Can you please help me by saying me how can i join two different picture to make it as one picture.??
does not seem particularly specific – do you want to simply combine two images as they are, do you want to clip elements from the one and insert them into the other, …?
Could you post (lores of) the images and explain what you intend to achieve?

How to combine sales and delivery data

hi
i have requirement to make a report from sales as well as deliveries. Important fields in report are sales document , material , plant , sales document type , country key , sold to party , ordered quantity , delivered quantity , price from vakon ( KBETR ), actual goods issue date.
The required extractors are 2LIS_11_VASCL, 2LIS_11_V_SSL ,2LIS_11_VAKON.
Problem is how to combine sales and delivery data as V_SSL has different key figures.Multicube is not the solution as dont have plant , sold to party and many other fields in V_SSL.
Kindly suggest how to combine sales and deivery data.
Regards,
Monika

I guess you do have shipping point in delivery.
In most scenarios shipping point may not(or) may be same like order plant.
Although they are different you can still roll up the delivery information to order level by plant since you have order # available as reference key in delivery.
With this reference key you can convert all delivery information to order (item) level.
I guess you can use one merge ODS with one cube (or) with 2 ODS for each at order level for validation.
You may have to map delivery type to order type as per R3 configuration as well.
speak with any Logistics guys for help.
cheers
Martin

Dataretrieval in hr abap (how to combine both pa and om in hr abap)

Hi Experts?
    My requirement is i wants to retrieve the data from HRP1000 table i.e get the long text from the field sc_text ,for this they have provided me some field values like PLVAR='01' , OTYPE='O' , OBJID -
(not given) ,ENDDA =9999.12.31. and also they have mentioned table PA0001-BUKRS(field).
      how to get objid field?
   Please provide me query ,how to combine Organizational data(hrp1000) with Personnel administration data(pa0001-bukrs)
Thanks in advance,
mohan

Hi mohan,
1. Its very impractical,
   especially in SAP HR Tables,
   to directly get data from tables using joins.
2. In your case,
   first read from infotype 0001
   using direct select statement,
   (or u can use HR_READ_INFOTYPE)
3. After wards, LOOP / FOR ALL ENTRIES IN
   and then read from the other required tables HRP1000.
regards,
amit m.

How to extend Article to Different Sales organization

Hi experts
How to extend Article to Different Sales organization
thanks in advance

Hi Hanumant,
1. Go to MM42
2. Enter the article to be extended.
3. Enter the Sales Organization and Distribution Channel to which the article to be extended to.
4. Select the Sales View.
5. Press Enter
Save
It's Done.
To verify, goto mm43 and enter the detail and check
or
after entering the article code in mm43 go to Sales Org. field and press F4, in the popup you will see a column 'Maint.' , X should be marked in front of your new sales org,dist channel combination.
Hope it helps.
Regards,
Anirban Roy

How to combine 2 assembly files????

Is anybody how to combine 2 assembly files together??? the 2 assembly files are the generated codes of 2 different c files. Each c file has its own main function. ThANKS

Is anybody how to combine 2 assembly files together???
the 2 assembly files are the generated codes of 2
different c files. Each c file has its own main
function. ThANKSYou're so wrong, on so many levels.... where to begin....
This is a Java forum, not assembly.... the two languages couldn't be more different.
You should at least have posted the question to "Native Methods".
Also, what you say doesn't make sense.
C functions compile to generate "object code", ie. *.obj.
These are then "Linked" together, what a program called a linker.
If you actually do have "assembly language" source code, ie. in an *.asm file, then you use an assembler
to assemble it.... again to an object file *.obj. Then use a linker to link it.
My use of the phrase "object file" does not have anything to do with "object oriented programming".
regards,
Owen

How to combine indicators in different cases?

Similar Messages

Maybe you are looking for