How to config network card to detect router?

Hi everyone,
I am newbie to solaris, I installed solaris on my old PC, and it has the Netgear FA311 card. It is supported by Solaris according to HCL.
however, it doesn't seem like it is auto-detecting the router.. as result, there is not internet connection.
So, may I ask for your help ?
1.) how do I know my existing network card is detected and installed probably in Solaris? is it auto detect?
2.) how do I manually config to detect my router?
Thanks

Are you trying to get an IP using dhcp or static IP.
If your trying to use dhcp then make sure your hostname is in /etc/nodename
and do a "touch /etc/dhcp.<int>" where <int> is the name of the driver for your interface.
If your trying to do static then put the IP of the router in /etc/defaultrouter
And your hostname in /etc/hostname.<int>
And make sure you have an entry for your hostname in /etc/hosts and /etc/inet/ipnodes

Similar Messages

How to understand network card known by OS

I have solaris 10 just installed...But didnt recognize network and internet...
i have no device seem as hme0...i have only "lo0" when i type ifconfig -a
so how can i understand if solaris knows my network card and installed properly..
thank you

... it is on the Hardware Compatibility list?
http://www.sun.com/bigadmin/hcl/
Do you know what Ethernet adapter is in the computer?
Is it a chipset that is integrated onto the systemboard, or is it a separate card?
Who made the computer ?
Operating systems like Solaris, Windows, Linux, MacOS, etc
do not natively support every chipset that was ever invented.
You may need to download and install driver software.
That software may be from the chipset manufacturer (RealTek, LinkSys, NetGear, Intel, 3COM, for example),
or it may be available from the computer manufacturer (Dell, HP, Lenovo, Sony as examples),
... or it may have been published by an individual person
that just chose to write their own code when the manufacturer couldn't be bothered.
As a last alternative, you'll need to buy an Ethernet adapter that is compatible.
You will need to provide more information if anyone is going to give more assistance.

How can two networks from the same router be showing up at once?

Very confused here. I hooked up the linksys wrt54g and obviously it showed up as an available network. It is hard wired into one computer.
I then (on an unwired computer) went into the router to rename the network and reset the password.
Now, when I check for available networks, both are present (linksys and the renamed one)? How can this be?
Also, the linksys network has five bars connectivity and the new one I renamed only has two. How is that possible?
Thanks

1. Always configure your router from a wired connection. Never through a wireless connection. The wired connection is the only reliable way to be sure your configure your router and not a different one.
2. Vista and Windows 7 allow you to name a wireless connection different then the "SSID" used on the router. It also allows you to set up two wireless connections using the same SSID. Clean up the list of preferred networks on your computer. That should take care of this.

How to config MSI AP-54G wireless router?

:angryfire:Hi,anybody.I have got a MSI AP 54G wireless roter from my friend,but no manual.I tried link it to my computer use it's LAN interface and I tried http://192.168.0.1 & http://192.168.1.1.But I can't access it's config interface.
HOW?

AP54G is only an access point, not a router.
Download the manual and see specs here:
http://global.msi.eu/index.php?func=proddesc&prod_no=89&maincat_no=131

How to config CME with FXS card for analog phones

I want to config FXS cards in CME router with SCCP protocol for transfer, pickup ... feature. I can find information about the sccp (the command about stcapp), but I can not find the information about how to config CME, e.g. the phone no.(something like ephone-dn .... )
Can anyone help me ? or send me the link
Thx
Dennis

Thx Johncaston,
Your config is for H323, it doesn't support features, something like transfer funtion .......
I have found the config for SCCP, let's share my finding
====================
ephone-dn 178
number 9933
description Board Room
name Board Room
hold-alert 30 originator
ephone-dn 179 dual-line
number 9990
description Meeting Room 3
name Meeting Room 3
hold-alert 30 originator
ephone 95
mac-address 9556.60FA.0200
type anl
button 1:178
ephone 96
mac-address 9556.60FA.0201
type anl
button 1:179
GigabitEthernet0/0 is up, line protocol is up
Hardware is MV96340 Ethernet, address is 0019.5566.0fa0 (bia 0019.5566.0fa0)
================================
stcapp ccm-group 1
stcapp
sccp local GigabitEthernet0/0
sccp ccm 172.16.136.125 identifier 1
sccp
sccp ccm group 1
associate ccm 1 priority 1
signaling dscp af31
audio dscp ef
voice-port 1/0/0
cptone HK
caller-id enable
voice-port 1/0/1
cptone HK
caller-id enable
dial-peer voice 21 pots
service stcapp
port 1/0/0
dial-peer voice 22 pots
service stcapp
port 1/0/1
=========================
Thanks !!
Dennis

Please Help!! Network Card Won't Detect Modem.. Advise about my options?

Thank you in advance for reading my post and for any help and advise..
I am on a friends computer because my Network Card went caput!.. now my computer can not detect my modem..
What happened?.. my surge protector did not protect my iMac during a thunder storm, and I have not been able to get online since.
I am almost sure now that my Network Card is the problem.. I have heard I will have to replace the entire board now! This could not have come at a worse time for me, so I am hoping and praying someone here will have a less expensive work around for me.
I am currently running a 700MHz G4 Flat Pannel with a DSL modem from Bell South. I was using my Ethernet input to get online, but, again, the modem can no longer be detected. This particular modem will not allow me to connect via USB either. If it did allow me to connect via USB, would that even work seeing how my network card is a wash?
Is there a way I can get another modem and use a USB or wireless something or the other to get my iMac back online without having to sell my arm and leg?
Sorry about the length of this post; I just want to make sure I cover as many bases as I can think of. Thank you again for any help; I really appreciate it! *april
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

BRAD!.. we are two ships sailing in the same mirky water; please somebody light a flair or something! =P
I always thought these things happened to 'other' people.. REALLY stinks to be us right now.
I have been doing some more reading.. my friend was nice enough to let me borrow his computer for a little bit. However, I still have not come across a definitive answer for a proven Internet access alternative.
So far, I have read about one other option that MAY work.. What I really need to know is.. with a corrupt Network Card, is it even POSSIBLE to get online by ANY other means? Or does having a corrupt Network Card mean that it destroys ANY other way to get online without having to replace the entire board? Is the Network Card what enables us to get online, or does the Network Card just allow us to connect to the Internet via Ethernet cable alone? I still have not found an answer to these questions.
That said, I mentioned reading about another Internet connection solution. This other option involves buying what is called a wireless router and a wireless AirPort card. I think they have to be installed inside the hard shell?? So with these parts and service, I believe we are still looking at a ballpark of US$200. I wish somebody could tell us, are there any other options?
On a side note, I have also learned that my particular 700 MHz iMac Flat Pannel will NOT take the wirelss AirPort EXTREME card; it will ONLY take the Original AirPort card, which, by the way, are more expensive and hard to find. Not too sure exactly what iMac Flat Pannel you have, Brad, but you should try to find out which one will work for your iMac. I don't know if I should trust eBay for used electronics, but it seems you can pick them up for a little less money than on any online websites. I saw some on a website called macofalltrades.com for about US$100.00; this website looks legit. I also tried Craigslist.ORG, and somebody was only selling an AirPort Extreme card, not the original... It may be worth looking on a near by big city local Craigslist though; make sure you click on the city nearest you.. The default craigslist.org is for San Francisco. I have heard a wireless router costs about US$40.00. However, I don't know exactly what a wireless router is or even what type I need to be looking for, what brand etc??
I need to know if I buy an AirPort card, will I also have to buy that AirPort Base thing as well?? All this information is becoming overwhelming. Could somebody please try to clairify? We would be eternally greatful! =)
Sorry about your computer, Brad; I know what you're going through. =(
iMac 15" Flat Pannel 700 MHz PowerPC G4 1GB SDRAM Mac OS X (10.3.9) i love my little bubble computer

T520 won't detect Network card in WDS/WinPE/Ghost image disk

Hello all,
I figured I would just post this so I could save 2 days of someone elses life.
I'm not sure how many other modes have the EFI and UEFI bios's in them but this has caused a lot of problems when trying to capture an image / image the Lenovo T520. So for anyone else that is having these problems here is how I got around the problem.
The Problem:
While trying to boot up off a Capture image with a CD or PXE boot for our WDS server the laptop would not detect the network card giving no IP address and listing the adapter as a hybrid. When trying to do a ipconfig /renew it would give an error around the lines of the loopback something or other ....... the adapter could not be contacted or initated.
I instantly thought this was due to the vanila WinPE / Capture image not having the drivers for the Lenovoo T520, so I went to the website downloaded the new drivers and injected them into the WinPE disk(You will want ot use the NDIS Drivers which are included in the package for this). Following this process it would still not detect or install the NIC. After many hours of searching it would apear this was due to the EFI/UEFI bios options not going through the proper boot cycle when in a PE enviroment. The solution was to mess around with the EFI/UEFI switches in the WinPE boot image during the creation proccess as listed below:
ocdimg -m -o -u2 -udfver102 -bootdata:2#p0,e,bc:\winpe_x64\etfsboot.com#pEF,e,bc:\winpe_x64\efisys.bin c:\winpe_x64\ISO c:\winpe_x64\winpeuefi.iso
The link with more details is here: http://support.microsoft.com/kb/947024
Eseentially once the new boot image was complied with the proper EFI / UEFI options enabled it went through the proper boot process detected the NIC and installed the drivers which I previously provided on the disk and we where off to the races imaging the new laptop.
Hopefull this will help some others who are struggling with this or any other model that has this type of bios.
Cheers, and thanks
Please feel free to post any additional comments to help others if you found better ways to get around this
One side note the EFI/UEFI to legacy mode only does nothing for the NIC problem, I have seen some posts where they can help with the hard drive issues when imaging, however as for the nic not loading in PE enviroments this setting in the BIOS did not reslove the problem.

Hi Rusty1234
If I did not remember wrongly, you may present or add drivers (network, hardware) under WDS / Ghost software or copy necessary drivers (e.g. your T520 network card drivers) under it's PXE / boot section.
Happy 2012!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/62...

How to web filtering via two network cards?

I have Installed Server 2008 and two network cards
on my pc. One LAN card for clients access and one for internet router. I need to share internet connection to my client computers with
web filtering. So how to do that? I need to block some sites to client access.

Hi,
According to your description, my understanding is that you want to use the WS 2008 to share Internet connection and provide web filtering function for internal clients.
Internal clients –(NIC1) WS 2008(NIC2) – Internet router – Internet network
Manually assign IP address, default gateway, DNS server, etc. on NIC2. Manually assign IP address, DNS server, etc. on NIC1.
Install Network Policy and Access Services – Routing and Remote Access Services. Detailed steps reference:
Install and Enable the Routing and Remote Access Service
https://technet.microsoft.com/en-us/library/cc770798(v=ws.10).aspx
Then open Routing and Remote Access and start configuration. Enable NAT on NIC2 to transfer IP address. Detailed steps reference:
Enable and Configure NAT
https://technet.microsoft.com/en-us/library/dd469812.aspx
Windows Server itself does not support web-based filter, third-party tools with application-layer firewall might be needed to realize this function. Configure WS as a router, it supports IP packet filtering, which specifies which type of traffic is allowed
into and out of the router. Reference：
https://technet.microsoft.com/en-us/library/cc732746(v=ws.10).aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I get an Equium A110-233 to recognise the network card under Linux?

Hi,
I've just bought an Equium A110-233. I partitioned the hard disk so I've got XP and Fedora Core 5 (FC5).
XP works fine when I plug in the network cable, but FC5 (or at least the Linux kernel) does not seem to be able to find and activate the network card.
The message I get is "8139too device eth0 does not seem to be present, delaying initialization". The 8139too module is in memory as is mii (which points to it).
Somehow I need to get Linux to detect that the card is there, but I just don't know how to do that. Can anyone help?
Thanks.

Hi
As far as I know the notebook has a integrated Realtek Network I/F Chip RL8100CL.
I think you should googol around for the compatible LAN driver for Linux which supports this chip.
Unfortunately, on the Toshiba page you will not find any drivers for any Linux distribution because Toshiba doesnt support this OS. ;(

How to install a network card on Solaris 10

Hi to all,
I have installed for the first time Solaris 10 on i386 system.
All went fine. Although Solaris did not found the PCI network card, is this normal?
How can I install the (Realtek) network card;
Thank you.
Costas.
Edited by: tritsako on Feb 9, 2009 11:33 AM

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How to config vpn pool on asa5510 in a Multi-hop routing lan?

home----internet----asa5510(172.16.0.1/30)----(172.16.0.2/30)Internet behavior management(172.16.0.5/30)----(172.16.0.6/30)LAN(192.168.1.0/24)
I want to use 'remote access ipsec vpn' to connect LAN(192.168.1.0/24),but i don't konw how to config vpn pool on asa 5510.
Does someone kown how to do?

Hi,
The VPN Pool could be pretty much any network/subnet.
The amount of routing hops on the LAN network doesnt really matter. The ASA should have a route for the LAN network so it can forward the VPN user traffic there. The return traffic from the LAN to the VPN user should be forwarded with the default route of the network devices. If your default route isnt pointing to this ASA then you naturally need to add a route for the VPN Pool on your LAN devices.
Though I am not sure I have understood your question completely.
- Jouni

Installing new network card...how?

The built in ethernet on my computer does not appear to be working. How do I get the Mac to see a new network card once i plug it into the board? Same for a sound card. I know that the built in sound is bad.
I have extensive knowledge of these processes for a PC, but not at all for a Mac. A PC will automatically detect new hardware, but the Mac doesn't appear to see it.
Thanks for any help.

The built in ethernet on my computer does not appear
to be working. How do I get the Mac to see a new
network card once i plug it into the board? Same for
a sound card.
There aren't a lot of PCI Ethernet cards supported natively in OS X, and even then those that are usually still need a driver installed for them to function. D-Link is the only one I know off-hand that markets a 10/100 card billed as Mac-compatible. A Mac-compatible generic sound card will be even harder to track down.. the only ones I know of are very expensive ones aimed at digital audio production.
-Douggo

Network card config

I cannot get the box running solaris to see any other computer or my internet gateway.
When i try and go to network card config (via preferances), it brings up a wizard type thing, that has nothing to do with network card.
Am i doing something wrong?
Any help would be great. I'm pulling my hair out
Cheers andy

Are you trying to get an IP using dhcp or static IP.
If your trying to use dhcp then make sure your hostname is in /etc/nodename
and do a "touch /etc/dhcp.<int>" where <int> is the name of the driver for your interface.
If your trying to do static then put the IP of the router in /etc/defaultrouter
And your hostname in /etc/hostname.<int>
And make sure you have an entry for your hostname in /etc/hosts and /etc/inet/ipnodes

Updated bios via Live Update and now my Network card isn't detected

I have an msi Z87-GD65 Gaming Motherboard and I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter. The adapter is a TRENDnet N600, plugs into PCIe if I'm not mistaken. Wifi if my only option with this computer, I can't use ethernet, so it's really important I get the network card working again. I have had zero issues with it until this.
The reason I was updating was to try to get my third monitor to work when plugged into the mobo, while my other two were plugged into the graphics card (which I also installed yesterday, but it's working fine). Note that it still was not working, but I had enabled the IGD Multi-Monitor from bios.
Any suggestions would be appreciated. I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
I've only been using Windows computers for a year, so bear with me if there's stuff I don't know. Thanks in advance. I can try to get a full list of what was installed later tonight, but all of it that I can find has been uninstalled at this point.
Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:

what OS you are running?
Quote
Note: I did not flash the bios when I installed, which I have now heard is a bad idea, apparently. l:
you said you've updated drivers & BIOS:
Quote
I updated some drivers and the bios via msi Live Update 6 last night and now my computer refuses to recognize my network adapter.
can you clarify is you update BIOS too or not?
and what is your current bios version?
Quote
and I updated some drivers
what kind of drivers?
Quote
I did try uninstalling the drivers but it still won't detect the network card. I also tried disconnecting and reconnecting the network card (and I cleaned the port for good measure).
have you tried to load last good known configuration or the last windows restore point?
or to reinstall OS?

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

How to config network card to detect router?

Similar Messages

Maybe you are looking for