How to configure content mgmt

Any idea how to configure content Mgmnt service to store it to external server?
we have documentum which we have configured but the only problem is the version management doesnt work and if we give a name we cannot change it later...
Any help would be appreciated...
DM Server is only for storing inside sap right..
We need DM service or CM service???

George ,
You can configure Documentum content repository as a external content server to store DIR originals.
You need to install Documentum content services for SAP before you can configure the SAP system.
You need to define a content repository entry for the external content server inthe Content management service .You also need to define a Content category for the content repository you created.
Hope this resolve your issue.
Regi

Similar Messages

How to configure content presenter taskflow parameters both design time

Hi,
I want to add content presenter taskflow to my portal page and want to configure taskflow parameters at both design and runtime?
So would like to know how to add content presenter taskflow(not content) to my portal page and how to configure parameters at both design and runtime?

Hi Yannick,
Going through the links which you have provided and will come back to you I face any problem.
Before going through the link I would like to know how to get content from ucms from specifying a query rather than getting from the entire folder.
Yes I am aware similar to the folder option you can specify a query but need help on writing a query and what parameters need to be mentioned in the query.
One more doumb question about where content presenter taskflow is present in the jdev so that I can drag and drop on my portal page.

How to configure Content server with Oracle Portal

I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
OS environment is Windows XP SP3.
Database server is Oracle 10gR2

Hi
"I need to configure Content server to work with UCM." - I am not clear on this .
UCM is content server .
Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
Hope this helps .
Thanks
Srinath

How to configure CSWP on Category page to show the Published Catalog-item page on Publishing site in a Cross Site Publishing scenario?

I have created a Cross Site Publishing Environment in SharePoint Online. After connected
to my catalog. 2 pages automatically created. But in "Category" page, if i click on an item it will bring me to the original path/item located in Authoring site. How to configure Content Search Web Part on Category page to show the Published Catalog-item
page on Publishing site?
Can we do this by changing the property mappings?

Hi,
According to my understanding, you want users to be redirected to pages in the current site instead of the source page of the search results in a Content Search Web
Part.
By default, the hyperlinks of the search results in a Content Search Web Part will point to the source page where the data comes from, when the hyperlink of each result
is clicked, user will be redirected to the corresponding source page.
If the data comes from other sites, what page do you want to display when user clicks a search result in the Content Search Web Part?
Property Mappings can help to control the content of each part of a display template, however, there seems no such property in the search result can help to redirect
to the pages of the current site, thus, it might not be able to meet your requirement.
More information about customizing the Content Search Web Part:
https://www.martinhatch.com/2013/02/customising-cbswp-part1.html
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to configure SharePoint 2010 / 2013 Search for SQL Database Contents and Oracle Database Contents?

Hi All,
We are planning to maintain the contents in SQL / Oracle. Could you please suggest anyone which is best for SharePoint 2010 / 2013 Search. How to configure the search for external content source?
Thanks & Regards,
Prakash

This link explains supported and non supported scenarios to use Oracle for BCS
http://social.technet.microsoft.com/Forums/sharepoint/en-US/453a3a05-bc50-45d0-8be8-cbb4e7fe7027/oracle-db-as-external-content-type-in-sharepoint-2013
And here is more on it
http://msdn.microsoft.com/en-us/library/ff464424%28office.14%29.aspx
And here how you can connect Oracle to SharePoint for BCS functionality
http://lightningtools.com/bcs/business-connectivity-services-in-sharepoint-2013-and-oracle-using-meta-man/
Overall it seems SQL doenn't require any special arrangement to connect BCS to SharePoint.
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

How to configure XSLT Helper for WPC content

Hi,
I'm trying to write my own XSLT Helper and use it when rendering content on WPC web pages. I didn't find any documentation on this topic, so I did mimicked what SAP does with their com.sap.nw.wpc.km.service.linkmanager.XsltHelper:
1. Wrote my little class that contains static method:
public class MyXslHelper
     public static String testMethod()
          return "response from MyXslHelper";
2. Added declaration of namespace and usage in xsl template:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:my_hlp="com.my.xsl.helper.MyXslHelper">
<xsl:value-of select="my_hlp:testMethod()"/>
3. Defined helper in Content Management->Web Page Composer->Editor->XSLT Helpers:
name=my_helper
alias=my_hlp
implementation=com.my.xsl.helper.MyXslHelper
description=My helper
PRT mode=*
This doesnt' work and when rendered throws exception java.lang.ClassNotFoundException: com.my.xsl.helper.MyXslHelper.
What are the steps that I'm missing? Does anyone have any documentation on how to configure xslt helpers?
Thanks in advance
Ruslan

Hi
Did you solve this issue?
Thanks!
Christof

How to configure one TREX host with multiple index servers ?

Hi All,
Does anyone know how to configure TREX on the one host,
with multiple index servers ?
Reason for this is to make better use of resources available on the host server(4 Gig, 4 Processor, Windows2003), to improve the search performance of
our KM content for portal users.
I am using TREX 7 and have not been able to do this,
despite reading the Single and Distributed install
documentation.
Any help would be appreciated.
Regards,
Andres

Hi Andres,
To make use of the RAM a Server provides you have to run two indexserver processes (each can then consume 2 GB);
Proceed like this:
1. Go to TREXdeamon.ini; check if section [indexserver2] is there (it is already provided, but not active in standard installation)
2. In TREXdeamon.ini go to
[daemon]
references sections below
programs=nameserver,preprocessor1,indexserver1,queueserver,alertserver
and add indexserver2 here. Restart TREX; second porcess is then started; can be checked in TREX monitor in Portal as well
3. To distribute existing indexes to the new process, start TREXadmintool and go to Index: Landscape
Go to the last two columns and move the indexes (move master here/secondary mouse click)
If you don't distribute the indexes the new index server process will be regarded when an new index is created.
Hope this helps!
cheers
Bettina

How to configure sso with SSL step by step

Purpose
In this document, you can learn how to configure SSO with SSL. After user have certificate installed in browser, he can login without input username and password.
Overview
In this document we will demonstrate:
1.     How to configure OHS support SSL
2.     How to Register SSO with SSL
3.     Configure SSO for certificates
Prerequisites
Before start this document, you should have:
1.     Oracle AS 10g infrastructure installed (10.1.2)
2.     OCA installed
Note:
1.     “When you install Oracle infrastructure, please make sure you have select OCA.
2.     How Certificate-Enabled Authentication Works:
a.     The user tries to access a partner application.
b.     The partner application redirects the user to the single sign-on server for authentication. As part of this redirection, the browser sends the user's certificate to the login URL of the server (2a). If it is able to verify the certificate, the server returns the user to the requested application.
c.     The application delivers content. Users whose browsers are configured to prompt for a certificate-store password may only have to present this password once, depending upon how their browser is configured. If they log out and then attempt to access a partner application, the browser passes their certificate to the single sign-on server automatically. This means that they never really log out. To effectively log out, they must close the browser.
Enable SSL on the Single Sign-On Middle Tier
The following steps involve configuring the Oracle HTTP Server. Perform them on the single sign-on middle tier. In doing so, keep the following in mind:
l     You must configure SSL on the computer where the single sign-on middle tier is running.
l     You are configuring one-way SSL.
l     You may enable SSL for simple network encryption; PKI authentication is not required. Note though that you must use a valid wallet and server certificate. The default wallet location is ORACLE_HOME/Apache/Apache/conf/ssl.wlt/default.
1.     Back up the opmn.xml file, found at ORACLE_HOME/opmn/conf
2.     In opmn.xml, change the value for the start-mode parameter to ssl-enabled. This parameter appears in boldface in the xml tag immediately following.
<ias-component id="HTTP_Server">
<process-type id="HTTP_Server" module-id="OHS">
<module-data>
<category id="start-parameters">
<data id="start-mode" value="ssl-enabled"/>
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1"/>
</process-type>
</ias-component>
3.     Update the distributed cluster management database with the change: ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct opmn
4.     Reload the modified opmn configuration file:
ORACLE_HOME/opmn/bin/opmnctl reload
5.     Keep a non-SSL port active. The External Applications portlet communicates with the single sign-on server over a non-SSL port. The HTTP port is enabled by default. If you have not disabled the port, this step requires no action.
6.     Apply the rule mod_rewrite to SSL configuration. This step involves modifying the ssl.conf file on the middle-tier computer. The file is at ORACLE_HOME/Apache/Apache/conf. Back up the file before editing it.
Because the Oracle HTTP Server has to be available over both HTTP and HTTPS, the SSL host must be configured as a virtual host. Add the lines that follow to the SSL Virtual Hosts section of ssl.conf if they are not already there. These lines ensure that the single sign-on login module in OC4J_SECURITY is invoked when a user logs in to the SSL host.
<VirtualHost ssl_host:port>
RewriteEngine on
RewriteOptions inherit
</VirtualHost>
Save and close the file.
7.     Update the distributed cluster management database with the changes:
ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct ohs
8.     Restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl stopproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl startproc process-type=HTTP_Server
9.     Verify that you have enabled the single sign-on middle tier for SSL by trying to access the OracleAS welcome page, using the format https://host:ssl_port.
Reconfigure the Identity Management Infrastructure Database
Change all references of http in single sign-on URLs to https within the identity management infrastructure database. When you change single sign-on URLs in the database, you must also change these URLs in the targets.xml file on the single sign-on middle tier. targets.xml is the configuration file for the various "targets" that Oracle Enterprise Manager monitors. One of these targets is OracleAS Single Sign-On.
1.     Change Single Sign-On URLs
Run the ssocfg script, taking care to enter the command on the computer where the single sign-on middle tier is located. Use the following syntax:
UNIX:
$ORACLE_HOME/sso/bin/ssocfg.sh protocol host ssl_port
Windows:
%ORACLE_HOME%\sso\bin\ssocfg.bat protocol host ssl_port
In this case, protocol is https. (To change back to HTTP, use http.) The parameter host is the host name, or server name, of the Oracle HTTP listener for the single sign-on server.
Here is an example:
ssocfg.sh https login.acme.com 4443
2. Restart OC4J_SECURITY instance and verify the configuration
To determine the correct port number, examine the ssl.conf file. Port 4443 is the port number that the OracleAS installer assigns during installation.
If you run ssocfg successfully, the script returns a status 0. To confirm that you were successful, restart the OC4J_SECURITY instance:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Then try logging in to the single sign-on server at its SSL address:
https://host:ssl_port/pls/orasso/
     3. Back up the file targets.xml:
cp ORACLE_HOME/sysman/emd/targets.xml ORACLE_HOME/sysman/emd/targets.xml.backup
4. Open the file and find the target type oracle_sso_server. Within this target type, locate and edit the three attributes that you passed to ssocfg:
·     HTTPMachine—the server host name
·     HTTPPort—the server port number
·     HTTPProtocol—the server protocol
If, for example, you run ssocfg like this:
ORACLE_HOME/sso/bin/ssocfg.sh http sso.mydomain.com:4443
Update the three attributes this way:
<Property NAME="HTTPMachine" VALUE="sso.mydomain.com"/>
<Property NAME="HTTPPort" VALUE="4443"/>
<Property NAME="HTTPProtocol" VALUE="HTTPS"/>
5.Save and close the file.
6.     Reload the OracleAS console:
     ORACLE_HOME/bin/emctl reload
7. Issue these two commands:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Registering mod_osso
1.     This command sequence that follows shows a mod_osso instance being reregistered with the single sign-on server.
$ORACLE_HOME/sso/bin/ssoreg.sh
     -oracle_home_path $ORACLE_HOME
     -config_mod_osso TRUE
     -mod_osso_url https://myhost.mydomain.com:4443
2.     Restarting the Oracle HTTP Server
After running ssoreg, restart the Oracle HTTP Server:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
Configuring the Single Sign-On System for Certificates
1.     Configure policy.properties with the Default Authentication Plugin
Update the DefaultAuthLevel section of the policy.properties file with the correct authentication level for certificate sign-on. This file is at ORACLE_HOME/sso/conf. Set the default authentication level to this value:
DefaultAuthLevel = MediumHighSecurity
Then, in the Authentication plugins section, pair this authentication level with the default authentication plugin:
MediumHighSecurity_AuthPlugin = oracle.security.sso.server.auth.SSOX509CertAuth
2.     Restart the Single Sign-On Middle Tier
After configuring the server, restart the middle tier:
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=HTTP_Server
ORACLE_HOME/opmn/bin/opmnctl restartproc process-type=OC4J_SECURITY
Bringing the SSO Users to OCA User Certificate Request URL
The OCA server reduces the administrative and maintenance cost of provisioning a user certificate. The OCA server achieves this by authenticating users by using OracleAS SSO server authentication. All users who have an Oracle AS SSO server account can directly get a certificate by using the OCA user interface. This reduces the time normoally requidred to provision a certificate by a certificate authority.
The URL for the SSO certificate Request is:
https://<Oracle_HTTP_host>:<oca_ssl_port>/oca/sso_oca_link
You can configure OCA to provide the user certificate request interface URL to SSO server for display whenever SSO is not using a sertificate to authenticate a user. After the OracleAS SSO server authenticates a user, it then display the OCA screen enabling that user to request a certificate.
To link the OCA server to OracleAS SSO server, use the following command:
ocactl linksso
opmnctl stoproc type=oc4j instancename=oca
opmnctl startproc type=oc4j instancename=oca
You also can use ocactl unlinksso to unlink the OCA to SSO.

I have read the SSO admin guide, and performed the steps for enabling SSL on the SSO, and followed the steps to configure mod_osso with virtual host on port 4443 as mentioned in the admin guide.
The case now is that when I call my form (which is developed by forms developer suite 10g and deployed on the forms server which is SSO enabled) , it calls the SSO module on port 7777 using http (the default behaviour).
on a URL that looks like this :
http://myhostname:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
and gives the error :
( Forbidden
You don't have permisission to access /sso/auth on this server at port 7777)
when I manually change the URL to :
https://myhostname:4443/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=.......
the SSO works correctly.
The question is :
How can I change this default behaviour and make it call SSO on port 4443 using https instead ?
Any ideas ?
Thanks in advance

How to configure for Multiple XML

Hi,
We were successful in working with single xml as a input. Now we are using multiple xml as a input for a single transaction. With the references and the suggestion in documents(working with xml files.pdf) related to Documaker we have changed configuration settings in FSISYS.INI and AFGJOB.JDT.
Down below we have mentioned those changes.
Input Extract file has been changed as F_Sch.DAT; following is the content in the extract file
COM_LOB_1111 .\INPUT\F_SCH1.xml
COM_LOB_1111 .\INPUT\F_SCH2.xml
COM_LOB_1111 .\INPUT\F_SCH3.xml
F_SCH1.xml,F_SCH2.xml,F_SCH3.xml
<?xml version="1.0"?>
<global>
     <lm>
          <COM>COM</COM>
          <LOB>LOB</LOB>
          <TRANSACTIONID>121212</TRANSACTIONID>
     </lm>
     <Foodcard>
          <Accname>Alex</Accname>
          <Email>[email protected]</Email>
          <Accid>1234123412341234</Accid>
          <Accno>1234123412341234</Accno>
          <Accaddr1>address1</Accaddr1>
          <Accaddr2>address2</Accaddr2>
          <Accaddr3>address3</Accaddr3>
     </Foodcard>
</global>
Changes to FSISYS.INI
< ExtractKeyField >
Key = 1,3
SearchMask = 1,COM_LOB_1111
< TRN_FIELDS >
COM = 1,3,N
LOB = 5,3,N
PolicyNum = 9,3,N
< DATA >
ExtrFile = C:\FAP\DLL\Computer\INPUT\F_Sch.DAT
AFGJOB.JDT
;ImportXMLFile;2;SCH=1,COM_LOB_1111 15,19
Inspite of those changes that made, we were not able to generate the output using three xml as a input.
***error details.***
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM17115: : The DownLoadFAP option is set to Yes, this option should be set to No for optimal performance. Check the RunMode control group, DownLoadFAP option.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<XML Parse Error: The 1 chars before error=<C>, the 20 chars starting at error=< >>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM12041: : FAP library error: Transaction:<>, area:<DXMLoadXMLRecs>
code1:<48>, code2:<0>
msg:<syntax error at line 1 column 0>.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10292: in <RULXMLExtract()>: Unable to <DXMLoadXMLRecs()>.
[04:16:29PM] Warning: Company - LOB - Transaction
[04:16:29PM] Warning: DM13023: in RCBSendToErrBatch(): Unable to assign the transaction to the error batch. The SentToManualBatch field is not defined in the TrnDfdFile.
[04:16:29PM] Error: Company - LOB - Transaction
[04:16:29PM] Error: DM10947: in NoGenTrnTransactionProc(): Unable to RULLoadXtrRecs(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12018: in RPDoBaseFormsetRulesForward(): Unable to <WINNOGENTRNTRANSACTIONPROC>().
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12066: in RPProcessOneTransaction(): Unable to RPDoBaseFormsetRulesForward(pRPS, RP_PRE_PROC_A).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12064: in RPProcessTransactions(): Unable to RPProcessOneTransaction(pRPS). Skipping the rest of the transactions for this Base. See INI group:< GenDataStopOn > option:TransactionErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12004: in RPProcessOneBase(): Unable to RPProcessTransactions(pRPS).
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12001: in RPProcessBases(): Unable to RPProcessOneBase(pRPS). Skipping the rest of the Bases for this batch run. See INI group:< GenDataStopOn > option:BaseErrors.
[04:16:51PM] Error: Company - LOB - Transaction
[04:16:51PM] Error: DM12127: in RPRun(): Unable to RPProcessBases(pRPS).
[04:16:51PM] Error: An error occurred during processing.
Kindly let us know in case of any solution for this issue.
Regards,
Balaji R.

It looks like it is unable to load your XML files. Depending on how your configuration is laid out, you may want to list full path names in your extract file - we make use of the same technique in 11.5, which I would imagine isn't terribly different in this respect from 12.0. Our configuration is such that we run Gendata at one level, read an extract file in the deflib folder, and the input files are in an input folder, so each entry in the extract file is C:\fap\mstrres\sampco\input\input1.xml.
Not sure if that is analogous to your setup or not, but based on the errors, either it can't find the file, so it is a pathing issue, or the file contents are invalid.
Tony

How to configure Email output in SD

Dear friends Pls sent me details of how to configure email output in SD module.
<REMOVED>
Thanks & Regards,
<REMOVED>

Hi
Idoc Def :Standard SAP format for electronic data interchange between systems (Intermediate Document). Different message types (such as delivery confirmations or purchase orders) normally represent different specific formats, the IDoc types. However, multiple message types with related content can be assigned to one IDoc type: For example, the IDoc type ORDERS01 transfers the "logical" message types ORDERS (purchase order) and ORDRSP (order confirmation).
Idocs are of two types basic type and the extension type .we need to configure the system settings for this process .
IDOC (Intermediate Document) - A data holder.
IDOC is divided in to three parts.
Control Record
Data Record
Status Record
Control record (Table: EDIDC):
- Every IDOC has only one Control Record
- Each Control Record contains header information like:
o IDOC Number
o Direction of IDOC: Inbound or Outbound
o Date and Time of creation of IDOC
o Date and time when the IDOC was last modified.
o Message Type of IDOC
o IDOC type and extension of IDOC
o Sender and Receiver Partner
Data record (Table: EDID4):
- Data Record contains Data to be processed.
- Every IDOC has one data record with multiple segments in hierarchy.
- Segments and Hierarchy of Segments are defined by IDOC Type and Extension.
- IDOC created has to strictly follow the hierarchy; else IDOC fails with Syntax error.
- Segments which are repetitive have qualifiers attached to it
Status record (Table: EDIDS):
- Status Record describes the status of IDOC.
- Each IDOC contains one status Record with multiple status information.
- Status at each level is appended to IDOC. E.g. When IDOC is created in SAP, Status is This IDoc has been generated through a test transaction, When the IDOC is added to system it is IDOC added, IDOC ready to be transferred to Application
- Status should always be read bottom-up. Status at the top is the latest status.
- Some Example of Status Records:
o Inbound:
§ 53 - IDOC successfully posted
§ 51 IDOC Failed
§ 64 - IDOC ready to be transferred to Application
o
Outbound:
§ 30 IDOC ready for Dispatch
§ 03 IDOC passed to port OK
§ 12 IDOC Dispatched
§ 16 Functional Acknowledgement Positive
§ 17 functional Acknowledgement Negative
IDoc Type: Defines the segments and hierarchy of segments
o Transaction Code:
§ WE30 To create, change or display the IDOC type and the extension.
§ WE31 To create the Segment
- IDOC type defines the segments to be used in the IDOC.
- It also defines the hierarchy and syntax of the segments.
- IDOC extension is nothing but to add segments to standard IDOC types.
- Transaction WE31 allows you to create segments.
- Program RSEIDOC3 documents the use of each IDOC type.
Segments:
Attributes of a Segment:
- Mandatory Segment: If checked, this segment should always exist in the IDOC.
- Minimum Number:
- Maximum Number: Maximum number of times this segment can be repeated in IDOC. -
Parent Segment: Parent of this segment
- Hierarchy level: Level of hierarchy.
Segment Definition (WE31):
Messsage Type: Defines the type of data in the IDOC
o Transaction Code:
§ WE81 To create, change or display the Message type and the extension.
§ WE82 Using this transaction you can link Message Type, IDOC Type, IDOC Extension and version.
- Message type identifies the type of data IDOC holds. E.g. Orders (ORDERS), Delivery (DESADV), Invoice (INVOICE). It also defines what needs to be done with the data in the IDOC, in case of Inbound IDOC, and which data to be extracted in case of Outbound IDOC.
- Message Type is linked to a process code, which in turn is linked to a Function Module. This function module extracts from or posts data to SAP depending on direction of IDOC.
- Relation between Message Type, IDOC type and IDOC extension needs to define. Without this relation Message type or IDOC type cannot be used.
Message Type Create, Change or Display (WE81):
Setup link between Message Type, IDOC Type, IDOC Extension and Version (WE82)
Process Code: Function Module is linked to a process code. This function module in executed for inbound or outbound IDOC.
o Transaction Codes:
§ WE41 Outbound Process Code
§ WE42 Inbound Process Code
- Process codes are linked to a Function Module.
- Relationship is Message Type is linked to a Process Code which is linked to a Function Module.
- In case if you are using a stand alone code to trigger an IDOC, you need not define a process code.
RFC Destination: System definition of destination.
o Transaction Code: SM59
- RFC destination identifies the destination of IDOC.
- In case of ALE:
o In ALE the communication mode is IDOC to IDOC, hence the type used is R/3 Connections.
o It is the destination SAP system which will receive the IDOC.
o In RFC destination you define the destination SAP system details like System, Login and Password.
Go thr below links:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
Sail

How to configure rz20 and dswp in solution manager ?

Hi all,
I have configured the ccms agent and ccms ping in the satellite system and all the connectivity with solution manager.
but then i haven' got the idea how to configure the template in the RZ20 and DSWP ?
Please advise on document / blog etc regarding this kind of configuration ?
Thank you and Best Regards
Fernand

Hi
check below link:
DSWP: http://help.sap.com/saphelp_smehp1/helpdata/en/8e/3ad6f807e147669036d2a6aed597aa/content.htm
RZ20: http://help.sap.com/saphelp_nw04/Helpdata/EN/17/550c404a435509e10000000a1550b0/content.htm
Thanks
Sunny

How to configure bulk breaking articles in SAP retail

hi frnds...
This is my client needs...
How to configure bulk breaking articles in SAP retail for hyper market..
Scenario is like this... Ex: for MEAT
There should be a Parent article & child articles process.
i.e Chicken X - 100 corcoss is divide into child articles (A,B,C,D,E,F) like
Brest bone - 5kg     - A
leg pieces - 2.5kg   - B
wings - 2.5kg         - C
P - 7.5kg                 - D
Q - 10kg                 - E
R - wastage - 50kg - F
these child articles wont consider for inventory
So how to configure this scenario in SAP Article master & to run this process.
Pl help me out with scenario

Please have alook at
[http://help.sap.com/erp2005_ehp_03/helpdata/en/2b/b03889df3611d1953b00a0c930e0da/content.htm]
Material type WERT is correct.
In Material type maintenance you can control at all if a store will be value only inventroy managmenet or both.
Further in the Site master WB02, you can control it on MC level.
regards
B

How to configure a Logical System for XI External System

I'm following the 'How to configure SAP XI to use the standard SAP communications APIs (idoc, pabi, rfc) from external system - How to create XI content with the Integration Builder' document.
I have everything configured, but in section 6.7 when I try to do a transaction BD10 on to send a MATMAS01 idoc using my Logical System IQS_EXTERN to my external system, it says '1 master IDocs set up ...', then it says '0 communication IDocs generated ...' and my external system does not get the IDoc. The NX7 Integration Engine does not get a message from SAP_CE8 to IQS_EXTERN.
How do I specifically configure my Logical System IQS_EXTERN to communicate with my external system via XI (NX7)?
I'm using the ICC Test-System CE8, SAP R/3 Enterprise 4.7 IDES and the NX7 Exchange Infrastructure (http://iccpi7.sap.com/rep/start/index.jsp).
Thanks,
Ed Culnane
Edited by: Ed Culnane on Oct 15, 2008 7:02 PM

Check whether you have setup Partner profile for receiving system ( Here its XI system). You need to create outbound parter profile for XI system.
Check out this forum ...
Re: trying to send Idoc using Standard Outbound Processin option
and blog ..
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Hope this will help.
Nilesh

How to configure apache for ssl in windows platform

hi all,
can anyone help me expalin how to configure apache for ssl in windows platform.

George,
I would take the following 'first steps'
1)Install Apache20 on your Windows machine following the Apache online documentation
http://httpd.apache.org/docs-2.0/misc/tutorials.html
2)Make sure you can 'serve up' static HTML content from your Apache Server
3)Install Weblogic Server per our online documentation
http://edocs.bea.com/wls/docs61/install/index.html
4)Also, make sure you can 'serve up' both static and dynamic (e.g., JSP) content
directly from WLS server
5)Once you have both of the above 'sanity' checks attempt to configure a simple
proxy by ppath or mime type via our online documentation
http://edocs.bea.com/wls/docs61/adminguide/apache.html#103803
Chuck Nelson
DRE
BEA Technical Support

How to configure Search for a site in sharepoint 2013?

Hi,
I had a document library.
1)I want to configure search so that I can search documents from previous month, quarterly, half year, year, and all documents is possible.
2)Search results are organized with most recent documents at the top.
3)Search results have year as refiner that can be used to show results only from specified year (In library we have field with year when document create)
To achieve this what I have chane in site settings->search
and what I have to write for Result Types, Query Rules
Thanks

Hi,
Following are the steps you need to perform for creating the search center.
http://blogs.technet.com/b/tothesharepoint/archive/2013/10/30/set-up-a-search-center-in-sharepoint-2013.aspx (About Search)
1. Create the site collection by navigating to the CA(Central Admin) & select the Enterprise Search Center Template.
2. Create Content Source -> Navigate to the Search Service application->Create the content source if the content comes from other content farm (if different farm accout if it same add the site Collection URL in default Content Source. ( make
sure the crawl account must have full read permission)
http://blogs.technet.com/b/tothesharepoint/archive/2013/10/31/how-to-create-a-search-center-site-collection-and-enable-crawling-of-your-content-in-sharepoint-2013.aspx (Create
Search Center)
3. Once you add url in the content source and run the full crawl.
4. Navigate to the Search center created at step 1 and try to search with the document name. you will see the document.
http://blogs.technet.com/b/tothesharepoint/archive/2013/11/06/how-to-configure-the-search-results-web-part-to-use-a-new-result-source-in-sharepoint-2013.aspx (Go
to the document Library and configure the result source)
5. To configure the refiner please follow this post. You will see the modified refiner to refine your search http://blogs.technet.com/b/tothesharepoint/archive/2013/11/07/plan-to-use-refiners-on-a-search-results-page-in-sharepoint-2013.aspx)
Let me know if you req. any other information.
Regards,
Basant Pandey
http://sharepointfordeveloper.blogspot.com

How to configure content mgmt

Similar Messages

Maybe you are looking for