How to configure human workflow using embedded ldap in standalone weblogic
I am trying to use embedded ldap to select users for a human workflow. I have created an application server instance using soa server details but the realm field in human workflow remains empty.
Please let me know what would be right steps.
Can you provide more details about the context of where this happens? Are you selecting users in the Organization editor in BPM studio? Is this on 11.1.1.3 or 11.1.1.4?
Similar Messages
-
How to configure sendmail to use multiple LDAP servers ?
Hi everybody!
I have a sendmail running on Solaris 10 and a LDAP server(192.168.1.9) also running Solaris 10 OS. I have configured the sendmail the following way:
bash-3.00# ldapclient list
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=email,dc=reso,dc=ru
NS_LDAP_BINDPASSWD= {NS1}*********************
NS_LDAP_SERVERS= 192.168.1.9
NS_LDAP_SEARCH_BASEDN= dc=email,dc=domain,dc=ru
NS_LDAP_AUTH= simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= sub
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= default
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_BIND_TIME= 10
I also have another LDAP server (IP 192.168.1.10). It is configured as a replicant of the 192.168.1.9 LDAP server.
The question is how can i configure sendmail to use both LDAP servers ?
The man pages explain how to configure ldapclient to use ONE server and what if want to use two or more? All the settings and the profiles the same.
Thanks in advance =))Hi!
To add LDAP servers to the Solaris ldapclient, you might use the ldapclient command:
ldapclient manual -v -a defaultServerList="servera.yourdomain.com serverb.yourdomain.com"
But this is only failover, AFAIK the Solaris ldapclient does not perform loadbalancing by itself.
But I am not sure about your sendmail programm. Normally, sendmail has its own configuration
and can be configured to use LDAP e.g. for aliases etc.
Regards!
Rainer -
How to configure https connection using a http proxy in weblogic server
Hi,
I have a proxy in Aqualogic Service Bus that points to a https external service. Our development environment internet access is supported by a http proxy server. The ALSB proxy fails to connect, with the following error message:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
<con:errorCode>BEA-380002</con:errorCode>
<con:reason>
Tried all: *1 addresses, but could not connect over HTTPS to server: sitenet43.serasa.com.br port: 443*
</con:reason>
<con:location>
<con:node>RouteTo_ConsultarSerasa</con:node>
<con:path>request-pipeline</con:path>
</con:location>
</con:fault>
I've added the following parameters to jvm args:
-Dhttp.proxyHost=10.128.0.50
-Dhttp.proxyPort=3126
-Dhttp.proxyUser=<someUserName>
-Dhttp.proxyPassword=<somePassword>
Accessing the page in Internet Explorer or Firefox is working fine. Somebody knows any additional configuration to this case?
Thanks in advance
Rogério CruzIn osb you can configure a HTTP proxy server. Once this is done all BS http/https requests will be through the configured proxy server.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137225
Manoj -
How to configure Firefox to use OpenVPN?
summary: I'm running OpenVPN from a Debian client through a Debian jumpbox/server. After I [start the server, start the client] most IP-based applications (DNS, ping, ssh) seem to work from the client, but client's Firefox cannot connect to http://www.whatismyip.com/ (or any other URI). How to configure Firefox to use the VPN? or otherwise fix the problem? or further debug it?
details:
I have a laptop running debian_version==jessie/sid with Firefox version=33.0 which needs to access a compute cluster. The cluster formerly required only an SSL VPN (enabled by a Firefox plugin) to access, but now has several additional requirements, which I seek to satisfy by running the SSL VPN through a jumpbox running an OpenVPN server. The jumpbox is running a "vanilla" Debian 7.7.
I have been using the laptop successfully for a few years without network problems. Currently I have the laptop connected by wire directly to an ISP-supplied modem/router. With `openvpn` NOT running on the laptop, I see:
* `ifconfig` shows no entry='tun0' (just "the usual" entries for 'eth0', 'lo', 'wlan0'), and shows the expected client IP# bound to 'eth0'.
* I can `ping` my jumpbox/server using its real IP#, but cannot `ping 10.8.0.1`
* I can `ssh` to my jumpbox/server using its real IP#, but cannot `ssh 10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
* browsing to http://www.whatismyip.com/ shows my client's IP# (as also shown in `ifconfig`)
Both my client/laptop and server/jumpbox setups are quite generic OpenVPN-wise, and are almost exactly as described on the Debian wiki
https://wiki.debian.org/openvpn%20for%20server%20and%20client
me@jumpbox:~$ date ; cat /etc/openvpn/server.conf
Sat Nov 8 16:49:00 EST 2014
port 1194
proto udp
dev tun
ca /etc/openvpn/ca.crt
cert /etc/openvpn/server.crt
key /etc/openvpn/server.key
dh /etc/openvpn/dh1024.pem
server 10.8.0.0 255.255.255.0
ifconfig-pool-persist ipp.txt
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8" # google public DNS
keepalive 10 120
comp-lzo
user nobody
group nogroup
persist-key
persist-tun
status openvpn-status.log
verb 3
me@laptop:~$ date ; cat /etc/openvpn/client1.conf
Sat Nov 8 16:51:31 EST 2014
client
dev tun
proto udp
remote ser.ver.IP.num 1194
resolv-retry infinite
nobind
user nobody
group nogroup
persist-key
persist-tun
mute-replay-warnings
ca /etc/openvpn/ca.crt
cert /etc/openvpn/client1.crt
key /etc/openvpn/client1.key
ns-cert-type server
comp-lzo
verb 3
up /etc/openvpn/update-resolv-conf
down /etc/openvpn/update-resolv-conf
My jumpbox/server firewall is currently set to forward everything, using `iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE`:
me@jumpbox:~$ date ; sudo iptables -L
Sat Nov 8 16:42:06 EST 2014
Chain INPUT (policy ACCEPT)
target prot opt source destination
fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
Chain fail2ban-ssh (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
After I start `openvpn` on first the server and then the client, I see no OpenVPN errors on either the server or the client:
me@jumpbox:~$ sudo openvpn --script-security 2 --config /etc/openvpn/server.conf &
Sat Nov 8 17:48:25 2014 OpenVPN 2.2.1 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jun 18 2013
Sat Nov 8 17:48:25 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:48:25 2014 Diffie-Hellman initialized with 1024 bit key
Sat Nov 8 17:48:25 2014 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Sat Nov 8 17:48:25 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:48:25 2014 ROUTE default_gateway=ser.ver.gate.way
Sat Nov 8 17:48:25 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:48:25 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:48:25 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:48:25 2014 /sbin/ifconfig tun0 10.8.0.1 pointopoint 10.8.0.2 mtu 1500
Sat Nov 8 17:48:25 2014 /sbin/route add -net 10.8.0.0 netmask 255.255.255.0 gw 10.8.0.2
Sat Nov 8 17:48:25 2014 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Sat Nov 8 17:48:25 2014 GID set to nogroup
Sat Nov 8 17:48:25 2014 UID set to nobody
Sat Nov 8 17:48:25 2014 UDPv4 link local (bound): [undef]
Sat Nov 8 17:48:25 2014 UDPv4 link remote: [undef]
Sat Nov 8 17:48:25 2014 MULTI: multi_init called, r=256 v=256
Sat Nov 8 17:48:25 2014 IFCONFIG POOL: base=10.8.0.4 size=62, ipv6=0
Sat Nov 8 17:48:25 2014 ifconfig_pool_read(), in='TomRoche,10.8.0.4', TODO: IPv6
Sat Nov 8 17:48:25 2014 succeeded -> ifconfig_pool_set()
Sat Nov 8 17:48:25 2014 IFCONFIG POOL LIST
Sat Nov 8 17:48:25 2014 TomRoche,10.8.0.4
Sat Nov 8 17:48:25 2014 Initialization Sequence Completed
me@laptop:~$ sudo openvpn --script-security 2 --config /etc/openvpn/client1.conf &
Sat Nov 8 17:49:12 2014 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Sat Nov 8 17:49:12 2014 Socket Buffers: R=[212992->131072] S=[212992->131072]
Sat Nov 8 17:49:12 2014 NOTE: UID/GID downgrade will be delayed because of --client, --pull, or --up-delay
Sat Nov 8 17:49:12 2014 UDPv4 link local: [undef]
Sat Nov 8 17:49:12 2014 UDPv4 link remote: [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:12 2014 TLS: Initial packet from [AF_INET]jump.box.IP.num:1194, sid=25df7af6 0ece4089
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=1, <my config data/>
Sat Nov 8 17:49:13 2014 VERIFY OK: nsCertType=SERVER
Sat Nov 8 17:49:13 2014 VERIFY OK: depth=0, <my config data/>
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Sat Nov 8 17:49:14 2014 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Sat Nov 8 17:49:14 2014 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
Sat Nov 8 17:49:14 2014 [TomRoche] Peer Connection Initiated with [AF_INET]jump.box.IP.num:1194
Sat Nov 8 17:49:16 2014 SENT CONTROL [TomRoche]: 'PUSH_REQUEST' (status=1)
Sat Nov 8 17:49:16 2014 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5'
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: timers and/or timeouts modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ifconfig/up options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: route options modified
Sat Nov 8 17:49:16 2014 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Sat Nov 8 17:49:16 2014 ROUTE_GATEWAY lap.top.gate.way/255.255.255.0 IFACE=eth0 HWADDR=la:pt:op:MAC:ad:dr
Sat Nov 8 17:49:16 2014 TUN/TAP device tun0 opened
Sat Nov 8 17:49:16 2014 TUN/TAP TX queue length set to 100
Sat Nov 8 17:49:16 2014 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Nov 8 17:49:16 2014 /sbin/ip link set dev tun0 up mtu 1500
Sat Nov 8 17:49:16 2014 /sbin/ip addr add dev tun0 local 10.8.0.6 peer 10.8.0.5
Sat Nov 8 17:49:16 2014 /etc/openvpn/update-resolv-conf tun0 1500 1542 10.8.0.6 10.8.0.5 init
dhcp-option DNS 8.8.8.8
Sat Nov 8 17:49:16 2014 /sbin/ip route add lap.top.IP.num/32 via lap.top.gate.way
Sat Nov 8 17:49:16 2014 /sbin/ip route add 0.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 128.0.0.0/1 via 10.8.0.5
Sat Nov 8 17:49:16 2014 /sbin/ip route add 10.8.0.1/32 via 10.8.0.5
Sat Nov 8 17:49:16 2014 GID set to nogroup
Sat Nov 8 17:49:16 2014 UID set to nobody
Sat Nov 8 17:49:16 2014 Initialization Sequence Completed
I then see the following on my client:
* `ifconfig` shows a new entry=`tun0`, which looks correct
* I can `ping` the server using either its real IP# or `10.8.0.1`
* I can `ssh` to the server using either its real IP# or `10.8.0.1`
* `nslookup www.whatismyip.com` gives correct results
... but I get no connection if I open a new instance of Firefox and browse to http://www.whatismyip.com/ :-( "Looking up www.whatismyip.com..." succeeds quickly but the status line continues to display "Connecting to www.whatismyip.com..." until the attempt times out. I also get the same behavior (connection timeout) if I open a new instance of Chrome, or if I browse to http://www.whatismyip.com/ with a Firefox opened prior to starting OpenVPN. FWIW I get the same behavior browsing to any URI, including (e.g.) Google.
This is a major problem for me! For the SSL VPN to work, I need to start a Firefox and run it (since the SSL VPN's vendor only supports it on Linux via a Firefox plugin) to access a particular remote-access website. Furthermore I need the SSL VPN to run through the jumpbox/OpenVPN. (Don't ask, it's a long, sad story ...)
Is there something I must do to configure Firefox to use the VPN? Or is there some other way to fix this?
Alternatively, what should I do to further debug the problem? It just seems odd to me that the other services work (e.g., `nslookup`, `ssh`) but Firefox does not. That being said, both Firefox and Chrome fail in this usecase, so the problem might be generic to web browsers.
your assistance is appreciated, Tom Roche <[email protected]>You're kidding. You have to go through that rigamarole just to put your bookmarks on your own server? Where's the simple FTP option?
Also, the above-linked article has a broken link. The link to the weaveserver (which is what you have to set up on your own server) is no good, and there is no obvious replacement. There are plenty of Weave-related repositories here:
http://hg.mozilla.org/labs
but it's not clear what you need. -
How to trigger a workflow using generic object services?
Hi Experts,
Let me know on how to trigger a workflow using generic object services.
My requirement is to trigger the FI document reversal document using Object services.
Any info or docs relevant to this, please share with me..
Thanks,
Dinesh.Dinesh,
First of you need to check if the transaction has a BO (in released status) published to use the GOS.
These are the pre-requisites for GOS
http://help.sap.com/saphelp_46c/helpdata/en/94/aa532cddd511d289860000e8216438/content.htm
Once done.. check that you have valid workflow linkages active for this BO.
Now when you click on the 'start workflow' the system will show all relevant workflows for the BO to choose from and to start. -
How to configure sap to use gmail as smtp server?
Hi experts,
I need to know how to configure gmail as my smtp server. In the scot transaction I don't see anywhere where to specify whether it is a ssh connection, ports for secure smtp, username, password.
Does anyone know how to configure sap to use gmail as the smtp server?
I've seen some similar threads about this, but they are of no help. Although they are classified as answered, in most cases the reason they are answered is because the person who made the query dropped the cause trying to make it work. I'd like to know for sure is this is possible or not.Hi Camilo,
You can't set up gmail as your smtp server to handle this. gmail is an email server which generally are based on POP protocol. now for SAP to send mail to gmail, you would need one SMTP capable server which can relay those message received from SAP to configured email address.
As of WAS 6.10 SAP kernel supports SMTP without more components. i.e e-mails can be sent (or received) from the SAP system to each SMTP-compatible mail server. see SAP note 455140 for more details.
Hope this clarifies your doubt.
http://en.wikipedia.org/wiki/SMTP_server
Regards,
Debasis. -
How to configure router to use ip pool on the aaa server for vpn clients
how to configure router to use ip pool on the aaa server for vpn clients . i want to use vpn clients to connect to the router. authenticate using the aaa server username databse and also use the ip pool cretaed on the aaa server. i am not able to find the command on the router pointing to use the pool created on the aaa server. can u some one help me with this command.
sebastanHello Sebastan,
what do you use as AAA server (e.g. ACS with TACACS+ or RADIUS) ?
Regards,
GNT -
How to configure qpopper to authenticate against LDAP server
Hi,
This is re-post of my question:
I have directory server 6.0 set up on Solaris 9 system. Also, I have set up Solaris 9 system native LDAP client. The qpopper daemon is running on that client. I have re-compiled the qpopper to use PAM authentication, then 'kill -HUP' inetd. But when I try to connect to qpopper with PAM authentication, I got an error:
-ERR [AUTH] PAM authentication failed for user "nsr": No account present for user (13)
I do have user's account and I am able to retrieve the user's account information by 'ldaplist -l passwd nsr'. I guess it is related pam configuration problem, but I don't know how to configure pam for qpopper. The information provided by qpopper manual is listed below:
#%PAM-1.0
auth required /lib/security/pam_pwdb.so shadow
account required /lib/security/pam_pwdb.so
password required /lib/security/pam_cracklib.so
password required /lib/security/pam_pwdb.so nullok
use_authtok md5 shadow
session required /lib/security/pam_pwdb.so
Obviously, the example configuration is for Linux. So how I can configure Solaris pam.conf to have qpopper authenticate through pam?
My current pam.conf is listed here also:
login auth requisite pam_authtok_get.so.1
login auth required pam_dhkeys.so.1
login auth required pam_dial_auth.so.1
login auth binding pam_unix_auth.so.1 server_policy
login auth required pam_ldap.so.1
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth binding pam_unix_auth.so.1 server_policy
rsh auth required pam_ldap.so.1
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1
other auth requisite pam_authtok_get.so.1
other auth required pam_dhkeys.so.1
other auth binding pam_unix_auth.so.1 server_policy
other auth required pam_ldap.so.1
passwd auth binding pam_passwd_auth.so.1 server_policy
passwd auth required pam_ldap.so.1
cron account required pam_unix_account.so.1
other account requisite pam_roles.so.1
other account binding pam_unix_account.so.1 server_policy
other account required pam_ldap.so.1
other session required pam_unix_session.so.1
other password required pam_dhkeys.so.1
other password requisite pam_authtok_get.so.1
other password requisite pam_authtok_check.so.1
other password required pam_authtok_store.so.1 server_policy
Thanks,
--xinhuaniAS 6.0 sp4 officially does only support iPlanet Directory Server 5.0 sp1 and 4.13.
For more details visit: http://docs.iplanet.com/docs/manuals/ias/60/sp4/ig/prep.htm#42084
I guess, you can specify the directory server during the time of installation.
Thanks,
Rakesh. -
How to configure memory snapshots used in /HMUSA?
Dear experts,
Does anybody know how to configure memory snapshots? I want to call the /HMUSA and have a look at the snapshot using the Memory Inspector. But I would like to get a itemized list of the memory used, for example for the TTAB buffer I would like to know which process or transaction has used certain amount of memory in this buffer. Thanks in advance.
PS: I am using a system for test purpose and I am the only one using this system (it's not a system used in a real company, and I have an administrator account).Hi Sam,
Please review the following note, as it might help you!!!
Tuning Output Post Processor (OPP) to Improve Performance (Doc ID 1399454.1)
R12: How to Configure the Account Analysis Report for Large Reports (Doc ID 737311.1)
Thanks &
Best Regards, -
How to configure HR Data mapping to LDAP
Hi everyone,
I configure LDAP connection and it works. But I cannot do mappings of attributes to LDAP. Is there any document what are the fields to map and what is the meanings?
Thanks
HaldunDear Abhishek,
Before you proceed to Create Jobs & Positions first you check whether the Personnel Actions (PA40) is configured or not. Then after uploading the employeee master data you can proceed to other process.
if PA40 is not configured then Configure in SPRO using PA/PM/Customizing procudures/ Infotype Menus etc. You can also maintain user profile using Tcode. SU3.
All the best.
Rgds,
Vikrant -
Can we detect the user first time he logs in ( appln uses embedded ldap )
Hi,
We are using weblogic embedded ldap for authentication in our application
The first time the user logs in to our applicaiton, we need to detect he is log-in the first time,
so take him to change password page.
Can we do like that ?
Regards,
Harsha
Edited by: harsha.karthigai on Aug 28, 2009 5:50 AMHi,
By default when you open a report it displays the report exactly as it was last saved. So even if you user views the report
drills down
then closes the report without saving
then views the report immediately
the report will open in its original state. There is no setting which can be amended to change this. It is possible to write your own viewer but that would be a significant piece of work
Regards
Alan -
How to configure the workflow settings in ecc 6.0
hi
this is vinod
i have a ecc 6.0 server but iin that system dont work work flow
how to configure the work flow settingsHi,
can you look at this
http://sapdocs.info/uncategorized/workflow-introduction/]
Regards,
Muralidhar -
How to implement schedule workflow using SharePoint Designer?
Hi All,
Please let me know , How to implement the schedule workflow using Share Point Designer.
Thank You.
Regards,
~Sri+1 to this. The closest that you'll get with list / level features is using Information Rights. You can trigger workflows based on time/date columns, which may serve your needs.
Failing that, you will indeed need a custom timer job.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Reportees search using embedded ldap provider
I am trying to use the embedded ldap server to find a person's reportees by using the inetorgperson attribute "manager". I have imported a number of users using an ldif file.
Here is my search:
Search DN: ou=people,ou=myrealm,DC=myproject
Filter: (&(objectclass=inetOrgPerson)(manager=uid=mgrID,ou=people,ou=myrealm,DC=myproject))
where mgrID is the name of the manager. This search returns no results. I do get results back if I remove the second condition of the filter, i.e. do:
objectclass=inetOrgPerson
Thus, I think the browser is connecting to the ldap server ok. I assume the manager search filter is not working because the manager attribute is not searchable? Is there any way to make it searchable? I couldn't find anything in the documentation about this.Search filters are composed of attribute match requirements. For example, to construct a search filter to return all the entries in a directory that contain an attribute called uid with one value equal to testuser, the filter would be:
(uid = testuser) -
How to run ADF command-line test-client on standalone weblogic host
I have followed the steps to create a test client for the ADF application. In used the following link:
http://download.oracle.com/docs/cd/B31017_01/web.1013/b25947/bcquerying007.htm
The above link does not talk about how to setup the environment where the standalone weblogic is installed to be able to run the test client.
I can run it in the jdeveloper environment.
I can also run from the command line on the development host, by cut-paste the command from the jdeveloper output log tab.
I am trying to run this client on the machine where we have a weblogic installed (standalone) for testing. We can run our ADF application from the browser with no issues. We want to automate and run some testing related to the ADF model (non-viewcontroller part) from the command line on this test stage.
Which/Where are the ADF libraries?
How can I add our application jar deployed on the weblogic (ear file) to the CLASSPATH?
What other libraries ADF/Weblogic do I need for the command line test client?
What am I missing?
Thanks for any help.
Edited by: mmunawar on Jul 2, 2011 1:03 PM
Edited by: mmunawar on Jul 2, 2011 1:04 PMcreate weblogic application server connection from jdeveloper and then Deploy that application through jdeveloper in the weblogic application server and then run it from jdeveloper and see if its working.
Maybe you are looking for
-
Hi, I need a solution regarding F4_Filename... when i am uploading a file am using 'F4_Filename' , when i press f4, with in look in window by default it is showing 'SAP Work directory', but I need another location like 'Desktop'. Thanks, Anil
-
UCCE 7.5.7 CAD macro to populate ICM Call Variable
UCCE 7.5.7 CAD 7.5.8 I need to create a CAD Toolbar macro in Cisco Desktop Administrator that reads data from a text file (an 8 digit number) and writes this data to an ICM Call Variable. The 8 digit number is not known until after the call is answer
-
Shipment category not copied from deliveries because none exist
Dear Gurus, Can u please let me know what this 2 errors means: 1) Shipment category not copied from deliveries because none exist 2) Shipping material not copied as means of transport not unique The above two warning message are getting from Inbound
-
BCC Deployment Overview not in sync across instances
When we see the deployment overview in BCC, the users are getting different results on the state of the system. It seems to be dependant on which instance the user is connected to. Are we missing any configuration that the different instances are not
-
Hi all, I hope you can help me understanding gateways a little better. I am trying to build a workflow where I need to diverge the flow to two different departments. Therefore I chose the gateway for this task (I guess thats what the gateway is suppo