How to connect DMS to the Solution Manager

Hi,
I have a DMS system in our SAP Landscape.
I like to monitor this system in our Solution Manager.
After installation and registration of the DAA agent in the Solution Manager I can see the host,but I do not see the DMS or the SAP MAX DB.
How do I configure this?
thanks in advance,
Beni

Hi Beni,
Check out two of my documents in SAP Maxdb community to do this for MaxDB.
DBACOCKPIT and Solman Monitoring for MaxDB Database : How to Setup -I
DBACOCKPIT and Solman Monitoring for MaxDB Database : How to Setup -II
Also if you are using SAP content server on windows then you can monitor the application also, check out this note.
1895715 - System Monitoring Setup for SAP CONTENT SERVER
My DMS is running on linux/unix , and I can't see any technical monitoring templates provided in Solman to monitor it.I am on SP10 for Solman 7.1.
Even if you can't setup monitoring for Content server application, you can set it up for Maxdb as described in my documents.
Thanks and Regards
Amit

Similar Messages

How the solution manager is realated to SAP BW

Hi experts!
Well!! I have been given a task to work on solution manager 4.0 and make it useful for SAP BI.
so I have a few questions.
1) Does basis person look after the config and authorizations?
2) I have been told to include the system change request ( SCR), Help desk issues into the solution manager... so how can I get that.
3) where my role starts exactly, I mean after connecting SAP BI to Solution manager,I guess this is done by BASIS person.
Points will be rewarded to the helpful replies... thanks in advance.

Hi Abass,
To answer few of ur questions,
2) you need to configure the Solution manager tool with the BI system when a ticket is raised or a change is triggered. These things will be monitored by a help desk or service desk person or a BI expersie person.
I guess your role is to implement this in ur org that means you need to create from basics such as creating business partners etc
Regards
Srini

How to install the Solution Manager

Hi Gurus,
any one can help me out i want to install the Solution Manager 4 any one can help me out like what is the minimum HDD & RAM is required, and how many exports wil required this Solman. Can i download from Market place please gurus help me out.
Cheers

Download Solution Manager from
http://service.sap.com/instguides
--> Technology Components
Find the installation guide at
http://service.sap.com/instguides
--> SAP Components
--> Solution Manager
For sizing and other questions see note
1088980 - Documentation: SAP Solution Manager 4.0
Markus

How to get the Version of the Solution Manager

Hi Experts,
The Solution Manager is Already Insatlled on our Machine.
How to Find out the Version of the Solution Manager???
How to Disply the Solution Manager Key????
Please give me the Proper Solution on this.
Regards
Khanna

Hi,
Check this link
http://www30.sap.com/korea//services/pdf/Solman_4.0_Maintenance_Optimizer_Setup_Guide.pdf
you might have to use t-code SPRO
Regards,
Ramesh P
Message was edited by:
Ramesh Parashivamurthy

How to get the Solution Manager Installer

Hello.
I am trying to install Solution Manager and then get the Solution Manager key.
*But I can't download the Solution Manager installation Program. I am searching the installer for a almost week
Please can anybody help me?

Hi,
If you are looking for installing solution Manager you need to have below softwares
1:IM (Installation Master)
2:Exports DVD's
3:Kernel DVD
4:JAVA DUMP
5:Database software
6:JCE Polic
7:J2SDK
If can find the same at service market place www.service.sap.com/swdc>Click on tab Installation and Upgrades>click on A-Z Index>Right side colum click on S>now select solution Manager,there you can find the list of softwares you are looking for.
Regards
Uday

How to add a system into Solution Manager directory.

Hi!
Can anybody tell me how to add a system into Solution Manager directory before generating license key for ECC installation .
Also,
How to connect the XI in same box with SolMan and ECC in defferent server to SolMan 3.2 .
I am going to install SolMan and than XI in and box and after that ECC in a seperate box.
AM I right?
regards,
Pratip Bhattacharyya

Hi Bratip Bhattacharyya,
SolMan 3.2 needs SLD only for automatic data gathering of the sap landscape; you can choose between SLD and LIS in transaction SMSY_SETUP (which simply uses the TMS-domain controllers for information gathering).
XI needs SLD, but XI needs also a netweaver04 (s) system (Abap WAS 6.40). SolMan 3.2 isn't a netweaver04 system (Abap WAS 6.20). So you have to install XI as an own central instance (Abap + Java) on the same windows server, if you like. In this case you have to install for XI an own SLD. Different SLDs can create bridges between themselves. Please look at the SLD configuration guide (quicklink /netweaver -> installation guides).
But don't ask me how to install two sap systems on one server on windows (on Linux it's easy I have done so); basically it will have an own SID and own "service" numbers (which means own tcp port numbers).
If you can't dedicate to XI an own server, it's only a question of hardware sizing. For the different combinations of netweaver components you should study the master guide for netweawer.
Bye
Message was edited by: Riccardo Escher

How do I setup RFC if Solution Manager and Target system are in same server

Dear Experts,
How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
Do I really need to setup RFC?
regards,
Abraham

Hello,
An RFC is a Remote Function Call and is used to communicate between computer systems.
A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
When you setup the RFC Target it is the Host and not the system that is specified.
You can get the host information when logged into the ERP system by running transaction SM59.
This would then be the target Host in the RFC from Solman to the ERP system.
As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
But if you continue to have problems please advise.
Regards,
Paul

How to download support packs from solution manager

Hi Experts ,
Please tel me the process for down loading support packages from solution manager.iam very new to this process
How can get an approval in solution manager to down load support packages in step by step process
Regards

Please check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
Kind regards,
Mark

How to configuration Maintenance Optimizer in Solution Manager 4.0?

Hi All,
Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
If any one having the document for same then please give me.
My mail id is : - <email address removed by moderator>
Thanks a lot,
Harshal

Hello Harshal,
Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
Another document is attached in Note 990534.
If you have further issues, Note 1024932 might be a good starting point.
Best regards,
Victor

How to apply patches by using solution manager system?

HELLO FRIENDS,
    when i download the patch SAPKB70012 & next level patches from service market place, it says that we have to apply the following packages by using maintenance optimizer(solution manager). here i have solution manager4.0., please any one let me know how to configure the maintenance optimzr and how to apply support packages by the solution manager system.
          Thanks&Regards
           Farkath.C

Hello
Solman will not implement the files you can download the files using Solman. You need to move the downloaded files to application server and implement them for that you need to configure MoPZ
You can go to server market place service.sap.com/RKT in that select Solution manager.
You will have to select the product as solution manager 7.0 and in technology consultants and system administrator you will find the configuration documentations in for for SIM files.
You can use that and learn how to configure the optimizer on the system.
Then you can download the files and implement the same.
Regards
Vivek

How to create a "blueprint" using solution manager?!!

I have been asked to create a 'blueprint" using solution manager!! I have absolutely no clue how this can be achieved using solution manager!! Please guide me on what is to be done.Would appreciate if you donot give me links of help.sap as the same is not making sense to me.
I have to create a blueprint for 20 countries of SAP reports available for FICO. Some of these reports are country specific while others are generic.

Hi Suchita,
You can create blueprint document using SOLAR01 transcation, provided you must have included all the organizational data, business process, master data,,
Follow the path
transaction SOLAR01->Business Blueprint-> Generate Blueprint
You must have created a solution and a project assigned to that solution also.
further clarifications feel to post the query
regards
Naveen
Edited by: Naveen kumar Palanichamy on Jan 2, 2008 7:16 AM

Delete the old CUA and build a new CUA on the Solution Manager

Hello together,
I'm about to delete the old CUA and build a new CUA on the Solution Manager.
The users are in multiple systems almost the same.
This raises the following questions:
If I export the printers from the old CUA in a file and import into the new CUA (Solution Manager, then the printer can be administered directly in Solman?
Furthermore, if I depended on the second or third child System and attached to the new CUA, the user description data are not overwritten, as bsp: with the description data of the last-connected system?
By delete the CUA child system in which users are blocked. Can you handle it?
I thank you in advance
Mirsad

> If I export the printers from the old CUA in a file and import into the new CUA (Solution Manager, then the printer can be administered directly in Solman?
-->the assignment of printers, not the printers themselves of course....
> Furthermore, if I depended on the second or third child System and attached to the new CUA, the user description data are not overwritten, as bsp: with the description data of the last-connected system?
If you mean adress data, already existing adresses are not overwritten. Such users will show up in scug as 'identical' or different' and can be handled accordingly.
> By delete the CUA child system in which users are blocked. Can you handle it?
Users without assignement to the central system get a global lock if the cua is removed in the central system. They still exist in usr02 in the central system, but with the global lock flag as indication, that they existed only for adminstrative means. The local lock flags in the child systems stay untouched. So if you take over these users into the new CUA they get the correct lock flag form the child system.
b.rgds, Bernhard

Define Service Desk Destination in the Solution Manager System (Dump creen)

hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors         SAPSQL_EMPTY_TABNAME
Except.                CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time          13.07.2008 14:05:57
Short text
    A dynamically specified FROM clause has an unexpected format.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSHI2" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
     caught in
    procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The running ABAP program attempted to execute an Open SQL statement in
    which a FROM clause was specified dynamically in the field "TABLE_NAME". In
     this
    FROM clause, either a table name after a join operator is missing, or an
     alias name after the key name "AS". The field "TABLE_NAME" could be empty as
    well.
regards

Hi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks.

The detection of short dump in the Solution Manager

Hi,
In my project, Batch are processing every night In the CRM system.
IF any error was occurred, alert email will be sent by the system, however,
when the "short dump" was occurred unexpectedly,the system can't detect it and email was not able to be sent.
Therefore I want to detect the "short dump" in the "Solution Manager".
Who can tell me that Is there any standard service/function which can handle this in the "Solution Manager" ?
regards
Takahiro

Hi,
Please check below URL and notes, hope it helps.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e3eeb4a8-0b01-0010-bd99-f4a700a49d32?quicklink=index&overridelayout=true
note 553953
note 784752
Regards,
Deepanshu

Regarding this issue in the configuration on smsy in the solution manager

hai all,
i am havig an issue when trying to configure the smsy in the solution manager
the issue is
Invalid user s0001234567 when calling SAP Backend system
all the rfcs related to the oss is fine
i had maintained the user in the aisuser tcode correctly
and then i router is finly working
software component : st is 400 kernel and level is18
hope all the experts of solution manger help me
thanks & regards
praveen kumar

Invalid user s0001234567 when calling SAP Backend system
Is it a valid S-USER?
Use valid S-USER and update the user details in AIUSER.
Regards,
Nick Loy

How to connect DMS to the Solution Manager

Similar Messages

Maybe you are looking for