How to consider material in SD pricing

Hi,
I need to take into account a specific % markup over basic price for NLAG materials.
I also use price list category (customer differenciation) and material groups (material differenciation, the same group is assigned to NLAG and non-NLAG material types).
As the first step I have added MTART field to "Field Catalog (Pricing Sales/Distribution)" in T Code OV24.
Then I have created a new condition table in T Code V/03.
Afterwards I have also defined a new access sequence in T Code V/07.
This sequence is used by one of price conditions assigned to pricing procedure in T Code V/08.
However when creating sales order the access to MTART field is not made.
I receive the message "102 Access not made (initialized field)".
What is wrong or what is still missing?

Hi,
During pricing determination, system looks at the value available in field KOMG. Since the MTART field is already available in KOMG and KOMP by standard, I am assuming that field is getting populated in KOMP and KOMG. Other place to check is in teh acess sequence.
In your access sequence, make sure the field assignment (3rd level) is complete.
In an access sequence, you assign a table to the access sequence and then you have to assign a field to each field of the table in the access sequence at the 3rd level of access sequence. Make sure, MTART is linked with KOMP-MTART.
Regards,
Naveen Aggarwal

Similar Messages

  • How to consider internal transfer movement for material aging Z report

    Hello Expert ,
    we are developing Z repot for material ageing .
          In this we are using BSIM table  but in our case internal transfer movement such as ( 411 ,412 ,413 ,etc.) create debit credit entry in BSIM for this reason value of material getting correct but age of material get disturbed .
    we are having sale order stock (E), WBS stock(Q) , Collective stock , Vendor Stock (o) & stock transfer between stock type possible.
    For all above consideration how to calculate material Age.

    Dear experts
    i have the same issue, could you pls advise the answer?
    another question; how to unify the stock locations rather than maintaining different locations such as sales order stock, free goods, commercial stock and in the same time the margin reporting to be based on transaction/line item in sales invoice?
    thanks

  • How to validate material status in physical Inv Doc creation using MI01

    Hi Experts,
    I would like to know how to validate material status while creating physical inventory document using MI01 transaction.
    I tried to figure out a suitable BADI and customer exits ,but it didnt work out well.
    Kindly share your thoughts on how this can be achieved.
    Regards,
    Mohammed Aslam Rasheed

    Do you really create your inventory documents with this MI01 transaction manually by entering material for material?
    The real transaction for physical inventory is MI31. How do you want SAP to react if hundreds of materials are selected and inventory documents are created in a batch process?
    SAP takes care about the material status in MI04 and MI07 transactions.
    I am not aware of any exit for MI01 maintenance, you may consider Explicit and Implicit Enhancement Options

  • HOW CAN APPLY FREE GOOD 4 PRICING PROCEDURE?

    TELL ME SIR HOW CAN APPY FREE GOOD 4 PRICING PROCEDURE?

    Hi Pradeep
    1.Run trans. VBN2 to first create master record for free goods as follows:
    Enter following information in selection screen:
    - Free goods type: NA00
    - Sales org, distribution channel, customer # and execute.
    Now in next screen create the record as follows:
    - First select the exclusive button and verify that you are in exclusive view. 
      (that is if you want exclusive)
    - Material#, Min qty - Say 34 cartons. (check in what units you want to manage)
      From: 34 cartons
      unit of measure: 
      Free goods: 12 Pcs
      Unit of measure: Pcs
      Calcualtion type: 1 or try the other options
      Deliver control: Blank or any of the other options suitable to you.
    Now save and exit.
    Now run VA01 for 34 cartons and press enter. The system will automatically propose the free goods 
    item at no additional charge. Try higher order qtys and see if the free goods qty are scaling up. 
    If not adjust the calculation parameters in the master record screen
    It should be transaction VBN1. Sorry for the error. 
    VBN2 is to change the record. VBN1 creates it.
    If you want to give free goods to some of the customers than
    1. create a customer group say 99 for FREE GOODS
    In Free Goods Menu:
    2. add a feild catalog for CUSTOMER GROUP
    3. create a condition table (free goods) say 555 only for customer group
    4. create a sequence say FREE with condition table 555
    5. create a condition type say FREE with
    6. maintain pricing procedure say ZFREE with condition type FREE
    Now assign:
    7. Active Free goods Determination or Assign with your sales organisation this procedure ZFREE
    8. Create free goods determination with transaction code /nvbn1 for FREE with Key Csuomer Group 
    99 for exclusive
    Give customer Group say 99 and from 34 to 34 free 12
    Thanks
    G. Lakshmipathi

  • How the raw material cost is picked in product cost in case of split materi

    how the raw material cost is picked in product cost in case of split material in BOM

    Hi
    In case of Std cost (CK11N), the planned price or MAP that you enter in the Parent accounting View will be considered for the cost calcualtoin purpose
    Parent view means the view which is above the 2 or more valuation types which consists of avg value of all other val types
    Ajay M

  • Adding new field(material Desc) in pricing report.

    Hi Experts!
      I want to add material decsription in Pricing report,Report name 28.Is it possible to add this field in report 28.Else i want to  create new report as like report28 additionaly which includes material description.But my problem is i didnt find any field for material description when creting a report.How to add new field?Can anyone pl help me in this issue?
    Thanks in advance.

    Hi viswanth,
             Thanks for ur reply.I am not creating any z-report.I am creating new pricing report through t.code v/la.In that  they have provided some tables and its fields to create  a trerport. I didnt find fied respect to material description.I want to know how to add makt table there?.Is it possible to add new ?
    Edited by: Ranganayahi Chandirasekaran on Nov 26, 2008 9:46 AM

  • How to consider production capacity plan on sales order's delivery date.

    HI experts,
    How to consider production capacity  on sales order's delivery date.
    Say for example :
    Production workcenter capacity to produce the XYZ material 10qty in a Day.
    today i have created the sales order XYZ materail qty of 100. lead days has give based of MMR 21 days 17-07-2010( 3 sundays)
    and in same day i have created other sales order XYZ material qty 5000 ,the lead days again it will came 17-07-2010.
    Now my client requiremnt is when the schedule days is confirming in the sale order it sholud also consider the production capacity planning also
    Even though my work centers are overloaded it is confirming the sales order on 17-07-2010 (based on leads days in MMR)
    Thanks in Advance..
    Sudha

    Sudha,
    Tell your client he needs to install SCM.  Here, you can use either CTP or MLATP to confirm orders based on production capacity.
    There are a couple of standard workarounds available in R/3. 
    One is to create a constrained forecast for planning materials, consistant with capacity, convert the forecast to PIRs, and then perform ATP against 'Planning' rather than against product, using MRP Strategy 63.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/a2/4e799a927d11d1800f00c04fadcb73/frameset.htm
    Another method is to leave the Sales orders unconfirmed at original order entry (eg, no lead time).  Run MRP, run capacity levelling, firm the levelled planned orders, and then run BOP (called 'rescheduling' in R/3) against the unconfirmed backlog, with an ATP that considers firmed planned orders as supply elements.  The sales orders will confirm against the planned orders, which are scheduled according to available capacity.
    Either of these two methods will work, but the CTP SCM solution is by far the better answer.  Downside of SCM solution in general is the substantial implementation effort required.
    Rgds,
    DB49

  • Condition Type MVK0 & MVK1 and How it is linked with SD pricing ?

    Hi Experts,
    In my purchase order, line item for an article (material) there is a condition type MVK0 (Sales Price inc. Tax) and MVK1 ( Sales price excl tax) which appears in Red in IS-Retail server.
    The pricing analysis says that the condition has been found without the condition record.
    The details for condition type MVK1 is
    Condition class:- Prices (B), Calc type:- C (QTY),
    Condition category J ( Customer Expected price)
    There is no access sequence for this condition type.
    Manual entries      D Not possible to process manually
    The details for condition type MVK1 is
    Cond. class   B Prices
    Calculat.type C Quantity
    Cond.category W Expected sales price (including tax)
    Access Sequence:  Not maintained
    Manual entries      D Not possible to process manually
    I wish to know how to populate values for these condition type.
    Also could someone throw light on the condition category Wand J.
    what is the importance of MVK0 & MVK1 condition types and How it is linked with SD pricing?
    if we want this condition types values in PO what settings needs to be done?
    Any Input is highly appreciated.
    Regards,
    Selvakumar. M

    CLOSED

  • How to restrict Material Class in Sales Contract Doc

    Hi,
    I need to restrict Material Class in Sales order based on Item catagory, Material group4 and Sales contract Document type.
    If the above 3 fields having a particular value then the system should restrict all the other classes of that material and display only a particular class and it's related characteristics.
    If any one come across such a senario then pklease let me know.
    Regards
    Ajay

    Hi,
    You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
    how to restrict material master by material type  t-code MM01
    Hope this helps!!
    Regards,
    Raghu

  • For STO with billing how to take material in plant stock without cancelling excise duty

    Hi,
    Please suggest for STO with billing how to take material back in plant stock without cancelling excise duty.
    Scenario is
    Material transffered from manufacturing plant to depot,material is in transit now, but due to some reason material calls back to manufacturing plant.
    Since the excise invoice is raised and material move out of factory client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement.
    Please suggest how to take back goods to manufacturing plant without cancelling excise invoice.
    We have suggested client as there is no provision to take back goods to manufacturing plant without cancelling excise invoice
    and to take back material to manufacturing plant stock they have to cancel excise invoice and other related documents.
    But client is asking for another options.So requesting you to please suggest any alternative ways for same.
    Thanks,
    Amit

    client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement
    I don't think, there is a statutory rule which says, manufacturer should not cancel the excise invoice generated on their Depot plant.  Justification can very well be given to Excise authorities and hence, ask your client to follow the normal process by treating this as Depot returns.
    G. Lakshmipathi

  • How to print material document in header level?

    Hi Guys,
    How to print material document from header level. I can only print them in item level. But i want that in header level. For example, I have 4 movements inside a material document and I want to issue only one output from the header level.
    I can see the option Goto -> Additional Function -> output, but it is disabled. Please let me know hot to acheive this and if you need further info on this. Please throw some light on this.
    Thanks
    Yasin.

    HIi
      Your question is not clear.  What exactly you want to be.
    1.  To print material header in your smart form / Sap Script what is the problem. Itu2019s quite easy you can do it. Let me know what problem you are facing.
    2. The option is disables because of business functionality ask your functional guys to help you on the same.
    Regards
    Swati

  • How to Restrict Material Type in MM01 ?

    *Hi experts,*
    *How to restrict material type ? i wanted to restrict the end-user not to access any other material types than Raw material,Semi-finished goods. it means when end user trying to create material then if he enters other than these two material types then he should get error saying that "your not authorized to select that xyz material type".*
    *I have tried to restrict the object M_MATE_MAR(Material Master : Material type) but am unable to do so. is there any other object which take care of Material types ? did i selected correct object or not??*
    *can anyone help out.*

    Hi,
    You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
    how to restrict material master by material type  t-code MM01
    Hope this helps!!
    Regards,
    Raghu

  • How to change material component for a Purchase Order?

    How to change material component for a Purchase Order?
    I need FM .
    PLEASE help

    Dear ,
    Create PO with item category L....There in Item detail you will get tab for material.
    There click in component Button, it will take you to the component screen there you can assign and deassign components.
    Hope this helps.
    Regards
    Utsav

  • How to Create material master workflow

    Hi All,
    Can anybody tell me how to create material master workflow?
    i need to customize the workitem  for creating data in different views in MM01 transaction with restriction to particular user.
    Regards,
    Priti

    Hi,
    This link is to  display a material.My requirement is to create a workflow which will allow a responsible person to enter data for specific department data e.g Purchase,Accounting etc.Initially anyone can create data using basic data1 and basic data2 views.After this my workflow will be triggered and it will go to next person who is responsible to enter Purchase data and then Accounting data.
    Plz help me to create different views with respect to person.
    Thanks in advance.

  • How see if material exist in the center?

    Hi gurus.
    Iam a abaper and I hene a problem.
    I am using  BAPI_SALESORDER_CREATEFROMDAT2 and ocurrs log error in txt file :
    The material 40000221 does not exist in the center CE52 / country BR
    How see if material exist in the center?(transaction ?table? )
    Thanks

    Being an ABAPer, you should be knowing in which tables a material would be stored than a functional guy.  Moreover, being an old member of the forum, you should be knowing forum rules where it has been clearly spelled out to post queries here after ensuring that you made efforts to search the forum.  So according to that, had you searched with that text ( material 40000221 does not exist in the center), you would have found lot of discussions happened on this topic.
    Coming to your query, you need to check first in MARA table whether the material is created or not.  Next in MVKE where the material has to be extended to Sales Area for which, the sale order is being created.
    G. Lakshmipathi

Maybe you are looking for