For STO with billing how to take material in plant stock without cancelling excise duty

Hi,
Please suggest for STO with billing how to take material back in plant stock without cancelling excise duty.
Scenario is
Material transffered from manufacturing plant to depot,material is in transit now, but due to some reason material calls back to manufacturing plant.
Since the excise invoice is raised and material move out of factory client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement.
Please suggest how to take back goods to manufacturing plant without cancelling excise invoice.
We have suggested client as there is no provision to take back goods to manufacturing plant without cancelling excise invoice
and to take back material to manufacturing plant stock they have to cancel excise invoice and other related documents.
But client is asking for another options.So requesting you to please suggest any alternative ways for same.
Thanks,
Amit

client can not cancel excise invoice from legal point of view & client has to pay excise duty for the material movement
I don't think, there is a statutory rule which says, manufacturer should not cancel the excise invoice generated on their Depot plant. Justification can very well be given to Excise authorities and hence, ask your client to follow the normal process by treating this as Depot returns.
G. Lakshmipathi

Similar Messages

Plant to Plant STO with billing

Dear Guru's
I am facing a Problem in Plant to plant STO with Billing.As my both plants are Excisable, I have done a copy control between NL and JEX now in Jex proforma invoice i am giving the value for the material and the excise duties. when i go to J1iin the value of Excise is not flowing. I have maintained the delivery type to billing type in Tax on goods movement also.
Kindly guide me.
regards,
Sudhir

hi,
after gone through your problem i realised you are asking excise invoice during intra-comp. billing.
Dear- if you are using UB doc in P.O then no need to mantain actual comercial invoice only req is proforma invoice. You know proforma invoice is not related to accounting if it isnot related how you can generate excise invoice.
If your invoice is related to acconting definitely you can raise a commercial invoice as well as excise invoice . So for this just you check after creation of billing check whether a/c doc. generated or not .
thanks
sunil

Intra Company STO with Billing

Hello,
Let me explain the Basic requirement from our client.
One Company code has 15 plants.
Material are being transferred across plants
We record revenue or expenditure to the respective plant when transfer.
As I had inquired and surfed in many threads,we couldnt get the better solution as everyone suggesting to create separate plant as company code and do STO Inter company for getting the billing.
But we required intra company STO with Billing.
Any advice would be appreciated
with regards,
Vignesh

Hi,
Expenditure occur for transferring material between two plants, can be capture in a condition type and then do invoice for transferring value
Refer a discussion to capture transferring amount in STO
Freight Expenses for Transportation to Depot Plant
Regards,
Biju K

Delivery Qty Zero for STO with 2 line item

Hi Guys,
I have a problem when create delivery for STO with 2 line item which contain material with BOM. I have create delivery with tcode VL10G refer to Purchase Order and Delivery successfully created, but delivery qty was zero or empty. I try to fill the dlv qty same with STO Qty but popup message "Only 0 PC for the material available", I have check the stock and there is a stock exist for the material.
I need help for this problem.
Regards
Gunawan

Hi,
Please check if inbound delivery is already created for that Qty
Thanks
Diwakar

For STO with Doc. Type UB, shipping instruction not picking automatically..

Dear All,
For STO with Doc. Type UB, shipping instruction not picking automatically.. Please advise.
Regards

Hi
Please verify in the config the below is populated already....
SPRO -> Material Management --> Purchasing --> Purchase Order --> Set up Stock Transport Order --> define Shipping Data for Plants
Open the Recieving & Shipping plant ID's and maintain their own shipping data and save.
Maintain: Sales Org:
Distr Channel:
Div:
Aside: your shipping plant is already configured with Sh.Point - Tcode: OVL2
Regards
RG

Inspection type for STO with delivery and billing , two step procedure

Dear All,
We've STO scenario between two company codes, plant '1000' of company code '1000' supplies goods to plant '2000' of company code '2000' using STO. We'd like to evaluate the supplying plant for vendor evalution with respect to receiving plant,
Please suggest , which inspection type '01' or '08' needs to be activated in the material master in receiving plant '2000' in order to consider the supplying plant ' 1000' for vendor evalution. and kindly let know me that whether the functionalities of QM procurement (Checking receipt of certificate while posting MIGO) can be used in STO scenario similar to normal procurement scenarios,
Here, we are going for STO scenario of two step procedure with outbound delivery & billing.
Thanks & regards,
rajesh

The inspection type '08' is used for stock transfer order process.
In SAP standard you can't evaluate the supplying plant but external vendor only.
Also the functionalities of QM procurement can influece or control it when materials are procured from external suppliers.
If you want to use the functionalities of vendor evaluation and QM procurement, I would suggest you implement normal procurement process, not stock transfer process.
Regards
Luke

Third party+ intercompany STO with billing ???????

Hi Experts.
Would like to take ur inputs.
My Client has 2 Company Codes 1000 and 2000
The 1000 Company code has 2 Distribution Centres- A001, A002.
And Company Code 2000 has 2 Sites-B001, B002.
My Client 1000 Company Code procures on Behalf of 2000 Company Code and sales the Material on a Specific Margin from 1000 Company code to 2000 Company Code.
Site B001( Company Code 2000 ) will raise P.O to Distribution Center A001 ( Company Code 1000 ) and then Distribution Centre A001 ( Company Code 1000 ) will raise P.O to the External Vendor.
a) How Can we inter-Link the respective transactions between Site B001 to Distribution Centre A001 and from Distribution Centre A001 to External Vendor ?
b) Is it Possible to Farward the raised P.O from Site B001 to Distribution Centre A001 to External Vendor ?
Please advice your valuable input on this.
Thanks in advance
Best Regards

Hanumant Nimbalkar,
1. a) How Can we inter-Link the respective transactions between Plant B001 to A001
Plant B001( Company Code 2000 ) will raise P.O to Plant A001 ( Company Code 1000 )
We use the Inter Company stock Transfer with Billing
Partis involved:
1. End Customer
2. Supplying Plant
3. Receiving plant
2. from A001 to External Vendor
Plant A001 ( Company Code 1000 ) will raise P.O to the External Vendor.
We use Third Party process
Process.
1. First Company code 2000 - Plant B001 will raise a P.O to Company Code 1000 - Plant A001
2. The Company code 1000 Receives the PO and Finds it has not stock within its plant
3. The company code 1000 will raise a new PO with reference to PO sent by Company code 2000 to its vendor.
4. The Company code 1000 asks the vendor to deposit the material in their plant site.(by providing plant A001 Address)
5. The Vendor will raise an invoice to the Company code 1000
6. Now From the company code 1000, from plant A001 STO will be performed keeping receiving plant as 2000
7. An Intercompany invoice will be raised by plant 1000 to plant 2000
8. The Plant 2000 after the receipt of the material / invoice will pay to Company code 1000
9. The Company code 1000 in return will settle the vendor invoice.
Regards
Sathya

Pricing for STO with shipping functionality

Hi SAP gurus!
I am setting pricing procedure for STO's, but since there are Outbound deliveries, STO pricing is ignored when Goods Issue is posted. Is there any workaround for this? Same applies to CC stock transfer and returns.
Best regards,
Maris

Dear Maris,
What type of STO that you are doing?
I mean PO - 351 and 101 OR
PO - Outbound delivery - PGI - 101 OR
PO - SO - Outbound delivry - PGI - billing - 101 - Invoice
Except in the last case, in all other STO scenorios, system takes Issue Plant material master price eventhough you change price in PO.But if you give other conditions like frieght it consider that fright in material valuation. But Base price it always takes from material master.
Find below link for clear understanding
http://help.sap.com/erp2005_ehp_02/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
Thanks & Regards,
Krishna reddy

INTER company STO with Billing

I want to setup STO for inter company with billing. Meanings, Plant A belongs to company code 1000 and plant B belongs to company code 2000.
Should I be using document type NB or UD?
What delivery type should I be using under Assign Delivery Type and Checking Rule?
I have tried with doc type UD with delivery type NLCC (it doesnu2019t work)
I have tried with doc type NB with delivery type NLCC (it works fine)
If I have to use doc type NB, can I just use ZNB or some customer doc type for this? Because, I need to have different number rage then standard SAP NB number range. So, I can separate number range by PO and STO. Please adviseu2026..

Hi
Should I be using document type NB or UD?
Use NB
What delivery type should I be using under Assign Delivery Type and Checking Rule?
Delivry tyep NLCC AAND Cheking rule B
If I have to use doc type NB, can I just use ZNB or some customer doc type for this? Because, I need to have different number rage then standard SAP NB number range. So, I can separate number range by PO and STO. Please adviseu2026..
you can use ZNB some customer doc type also
If need
steps
To set up Intercomopany process you need to do following config,
1. Go to SPRO --- MM --- Purchasing -
Purchase order -
Set up Stock Transport order
2. Firest step is to define shipping data for plants, here you have set rthe data for both the plants who are doing transaction.
For eg. XYZ1 as supplying plant & ABC1 as receiving plant are the two plants from company code XYZ & ABC respectively
Set data for plant XYZ1 as give the value of sales organization for eg for XYZ company sales organization XYZS will be responsible & other data as distribution channel & division.
Se the data same way for plant XYZ1 also with sales area of company code XYZ.
3. Second step is to assign delivery type to supplying plant & document type that should be NLCC and as per our example it is to supplying plant XYZ1 & doc type NB.
4. Next step is optional whether you want to use one step procedure or two step procedure.
5. You need to set up master data alaso such as XYZ1 to be set up as vendor in company code ABC,.
6. You need to set up receiving plant ABC1 as customer in company code XYZ.
With this minimum requirement you can set up Intercompany process with delivery.
Process will be as follow,
1.Create Intercompany Purchase order with vendor as XYZ1 & plant as ABC1 from receiving plant.
2.Process Outbound deleivery with VL10D
3. Post Goods Issue from supplying plant.
4. Post Good receipt in receiving plant.
5. Post billing invoice VF01 from supplying company code XYZ w.r.t delivery.
6.Post Invoice receipt in receing company code.
Regards
Kailas Ugale

STO WITH BILLING

Hi All,
I want to know the S.T.O(Intra company) billing, not profarma invoice.It should hit the G/Ls.( I am not asking about the Inter company plz). When I am doing the invoice with respect to the delivery no(VL02N) system is giving an error message i.e Delivery type NL cannot be invoiced with Billing type F2. Then I have copied the F2(billing type) and created a new billing type(ZF2). Then I did the copy contols settings for the same from( NL- F8 to NL - ZF2. Then while doing the billing I have selected
this billing type.System is showing an error as" This document is not relavant for billing.Thoug I have changed the copy control settings as per the LF - F2. How to this process plz help me.
Thanx&Regards,
Ram

Point 1: If the invoice should hit the G/L account the document category for the invoice type that you should select be " Invoice M".
Point 2: System is proposin the default billing type F2 because the order that you mention in the delivery type as "DL". In the order DL the default billing type as F2 as with reference to the Delivery document.
Point 3: The Item category that the system triggers should also be set as" Billing Relevence"
Please try the above procedure and revert.

How to transfer material from blocked stock to scrap location

Dear Experts,
Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
Due to this Iu2019m not able to scrap the material from blocked stock.
Pls advise what to do .Is there some other way to do it??
Thanks in advance

Hi,
You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
Dhruba
Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

QM: How to Move material from quality stock to unrestricted stock

Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,

Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar

HT1657 The movie I rented didn't downlaod, but I was charged for the rental. How do I get it to download without being charged again?

I rented a movie from itunes, but it didn't download to my ipad. I was charged for the rental. How can I download it without getting charged again?

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

I created a document yesterday using numbers. Today I cannot open it until I download a newer verions for $19.95. How do I get to my information without having to pay a ransom?

I created several documents last week, which were duplicates of documents created more than a year ago. Once duplicated in "numbers", I made changes, renamed, changed the location and began working on those documents. Now I cannot open them unless I upgrade to a newer version of numbers for $19.95. Is there a way around this? From the reviews I have read, not everyone is pleased with the newer version of numbers.

Numbers 3.0 is a free download for anyone with Numbers 2.3 on the Mac.
But from your description you may already have 3.0 on your Mac. Look for Numbers in your main Applications folder. That is probably the new version that you need to open the recently edited documents.
The old version would then be in a subfolder within Applications named iWork '09. That one can't open documents edited with the new version.
In any case, you do not need to pay for a new verson. If the new one is not already on your Mac, you can download it for free.
SG

How to get material and plant by providing control key as input ?

How to get the material and plant info based on control key values using a function module?
kindly help..

Hi,
Check the FM
K_VALID_PLANTS_OF_MATERIAL.
Sandeep Kaushik

For STO with billing how to take material in plant stock without cancelling excise duty

Similar Messages

Maybe you are looking for